# We use cmd-line-way( kubectl create) to create secrets 'calico-etcd-secrets' # refer to 'roles/calico/tasks/main.yml' for details. --- # Source: calico/templates/calico-config.yaml # This ConfigMap is used to configure a self-hosted Calico installation. kind: ConfigMap apiVersion: v1 metadata: name: calico-config namespace: kube-system data: # Configure this with the location of your etcd cluster. etcd_endpoints: "{{ ETCD_ENDPOINTS }}" # If you're using TLS enabled etcd uncomment the following. # You must also populate the Secret below with these files. etcd_ca: "/calico-secrets/etcd-ca" etcd_cert: "/calico-secrets/etcd-cert" etcd_key: "/calico-secrets/etcd-key" # Typha is disabled. typha_service_name: "none" # Configure the backend to use. calico_backend: "{{ CALICO_NETWORKING_BACKEND }}" # Configure the MTU to use veth_mtu: "1440" # The CNI network configuration to install on each node. The special # values in this config will be automatically populated. cni_network_config: |- { "name": "k8s-pod-network", "cniVersion": "0.3.1", "plugins": [ { "type": "calico", "log_level": "info", "etcd_endpoints": "{{ ETCD_ENDPOINTS }}", "etcd_key_file": "/etc/calico/ssl/calico-key.pem", "etcd_cert_file": "/etc/calico/ssl/calico.pem", "etcd_ca_cert_file": "/etc/kubernetes/ssl/ca.pem", "mtu": 1500, "ipam": { "type": "calico-ipam" }, "policy": { "type": "k8s" }, "kubernetes": { "kubeconfig": "/root/.kube/config" } }, { "type": "portmap", "snat": true, "capabilities": {"portMappings": true} } ] } --- # Source: calico/templates/rbac.yaml # Include a clusterrole for the kube-controllers component, # and bind it to the calico-kube-controllers serviceaccount. kind: ClusterRole apiVersion: rbac.authorization.k8s.io/v1 metadata: name: calico-kube-controllers rules: # Pods are monitored for changing labels. # The node controller monitors Kubernetes nodes. # Namespace and serviceaccount labels are used for policy. - apiGroups: [""] resources: - pods - nodes - namespaces - serviceaccounts verbs: - watch - list # Watch for changes to Kubernetes NetworkPolicies. - apiGroups: ["networking.k8s.io"] resources: - networkpolicies verbs: - watch - list --- kind: ClusterRoleBinding apiVersion: rbac.authorization.k8s.io/v1 metadata: name: calico-kube-controllers roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: calico-kube-controllers subjects: - kind: ServiceAccount name: calico-kube-controllers namespace: kube-system --- # Include a clusterrole for the calico-node DaemonSet, # and bind it to the calico-node serviceaccount. kind: ClusterRole apiVersion: rbac.authorization.k8s.io/v1 metadata: name: calico-node rules: # The CNI plugin needs to get pods, nodes, and namespaces. - apiGroups: [""] resources: - pods - nodes - namespaces verbs: - get - apiGroups: [""] resources: - endpoints - services verbs: # Used to discover service IPs for advertisement. - watch - list - apiGroups: [""] resources: - nodes/status verbs: # Needed for clearing NodeNetworkUnavailable flag. - patch --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRoleBinding metadata: name: calico-node roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: calico-node subjects: - kind: ServiceAccount name: calico-node namespace: kube-system --- # Source: calico/templates/calico-node.yaml # This manifest installs the calico-node container, as well # as the CNI plugins and network config on # each master and worker node in a Kubernetes cluster. kind: DaemonSet apiVersion: apps/v1 metadata: name: calico-node namespace: kube-system labels: k8s-app: calico-node spec: selector: matchLabels: k8s-app: calico-node updateStrategy: type: RollingUpdate rollingUpdate: maxUnavailable: 1 template: metadata: labels: k8s-app: calico-node annotations: # This, along with the CriticalAddonsOnly toleration below, # marks the pod as a critical add-on, ensuring it gets # priority scheduling and that its resources are reserved # if it ever gets evicted. scheduler.alpha.kubernetes.io/critical-pod: '' spec: nodeSelector: beta.kubernetes.io/os: linux hostNetwork: true tolerations: # Make sure calico-node gets scheduled on all nodes. - effect: NoSchedule operator: Exists # Mark the pod as a critical add-on for rescheduling. - key: CriticalAddonsOnly operator: Exists - effect: NoExecute operator: Exists serviceAccountName: calico-node # Minimize downtime during a rolling upgrade or deletion; tell Kubernetes to do a "force # deletion": https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods. terminationGracePeriodSeconds: 0 priorityClassName: system-node-critical initContainers: # This container installs the CNI binaries # and CNI network config file on each node. - name: install-cni image: calico/cni:v3.8.8-1 command: ["/install-cni.sh"] env: # Name of the CNI config file to create. - name: CNI_CONF_NAME value: "10-calico.conflist" # The CNI network config to install on each node. - name: CNI_NETWORK_CONFIG valueFrom: configMapKeyRef: name: calico-config key: cni_network_config # The location of the etcd cluster. - name: ETCD_ENDPOINTS valueFrom: configMapKeyRef: name: calico-config key: etcd_endpoints # CNI MTU Config variable - name: CNI_MTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu # Prevents the container from sleeping forever. - name: SLEEP value: "false" volumeMounts: - mountPath: /host/opt/cni/bin name: cni-bin-dir - mountPath: /host/etc/cni/net.d name: cni-net-dir - mountPath: /calico-secrets name: etcd-certs securityContext: privileged: true # Adds a Flex Volume Driver that creates a per-pod Unix Domain Socket to allow Dikastes # to communicate with Felix over the Policy Sync API. - name: flexvol-driver image: calico/pod2daemon-flexvol:v3.8.8 volumeMounts: - name: flexvol-driver-host mountPath: /host/driver securityContext: privileged: true containers: # Runs calico-node container on each Kubernetes node. This # container programs network policy and routes on each # host. - name: calico-node image: calico/node:v3.8.8-1 env: # The location of the etcd cluster. - name: ETCD_ENDPOINTS valueFrom: configMapKeyRef: name: calico-config key: etcd_endpoints # Location of the CA certificate for etcd. - name: ETCD_CA_CERT_FILE valueFrom: configMapKeyRef: name: calico-config key: etcd_ca # Location of the client key for etcd. - name: ETCD_KEY_FILE valueFrom: configMapKeyRef: name: calico-config key: etcd_key # Location of the client certificate for etcd. - name: ETCD_CERT_FILE valueFrom: configMapKeyRef: name: calico-config key: etcd_cert # Set noderef for node controller. - name: CALICO_K8S_NODE_REF valueFrom: fieldRef: fieldPath: spec.nodeName # Choose the backend to use. - name: CALICO_NETWORKING_BACKEND valueFrom: configMapKeyRef: name: calico-config key: calico_backend # Cluster type to identify the deployment type - name: CLUSTER_TYPE value: "k8s,bgp" # Auto-detect the BGP IP address. - name: IP value: "autodetect" - name: IP_AUTODETECTION_METHOD value: "{{ IP_AUTODETECTION_METHOD }}" # Enable IPIP - name: CALICO_IPV4POOL_IPIP value: "{{ CALICO_IPV4POOL_IPIP }}" # Set MTU for tunnel device used if ipip is enabled - name: FELIX_IPINIPMTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu # The default IPv4 pool to create on startup if none exists. Pod IPs will be # chosen from this range. Changing this value after installation will have # no effect. This should fall within `--cluster-cidr`. - name: CALICO_IPV4POOL_CIDR value: "{{ CLUSTER_CIDR }}" # Disable file logging so `kubectl logs` works. - name: CALICO_DISABLE_FILE_LOGGING value: "true" # Set Felix endpoint to host default action to ACCEPT. - name: FELIX_DEFAULTENDPOINTTOHOSTACTION value: "ACCEPT" # Disable IPv6 on Kubernetes. - name: FELIX_IPV6SUPPORT value: "false" # Set Felix logging to "info" - name: FELIX_LOGSEVERITYSCREEN value: "warning" - name: FELIX_HEALTHENABLED value: "true" # Set Kubernetes NodePorts: If services do use NodePorts outside Calico’s expected range, # Calico will treat traffic to those ports as host traffic instead of pod traffic. - name: FELIX_KUBENODEPORTRANGES value: "{{ NODE_PORT_RANGE.split('-')[0] }}:{{ NODE_PORT_RANGE.split('-')[1] }}" - name: FELIX_PROMETHEUSMETRICSENABLED value: "false" securityContext: privileged: true resources: requests: cpu: 250m livenessProbe: exec: command: - /bin/calico-node - -felix-live - -bird-live periodSeconds: 10 initialDelaySeconds: 10 failureThreshold: 6 readinessProbe: exec: command: - /bin/calico-node - -bird-ready - -felix-ready periodSeconds: 10 volumeMounts: - mountPath: /lib/modules name: lib-modules readOnly: true - mountPath: /run/xtables.lock name: xtables-lock readOnly: false - mountPath: /var/run/calico name: var-run-calico readOnly: false - mountPath: /var/lib/calico name: var-lib-calico readOnly: false - mountPath: /calico-secrets name: etcd-certs - name: policysync mountPath: /var/run/nodeagent volumes: # Used by calico-node. - name: lib-modules hostPath: path: /lib/modules - name: var-run-calico hostPath: path: /var/run/calico - name: var-lib-calico hostPath: path: /var/lib/calico - name: xtables-lock hostPath: path: /run/xtables.lock type: FileOrCreate # Used to install CNI. - name: cni-bin-dir hostPath: path: {{ bin_dir }} - name: cni-net-dir hostPath: path: /etc/cni/net.d # Mount in the etcd TLS secrets with mode 400. # See https://kubernetes.io/docs/concepts/configuration/secret/ - name: etcd-certs secret: secretName: calico-etcd-secrets defaultMode: 0400 # Used to create per-pod Unix Domain Sockets - name: policysync hostPath: type: DirectoryOrCreate path: /var/run/nodeagent # Used to install Flex Volume Driver - name: flexvol-driver-host hostPath: type: DirectoryOrCreate path: /usr/libexec/kubernetes/kubelet-plugins/volume/exec/nodeagent~uds --- apiVersion: v1 kind: ServiceAccount metadata: name: calico-node namespace: kube-system --- # Source: calico/templates/calico-kube-controllers.yaml # See https://github.com/projectcalico/kube-controllers apiVersion: apps/v1 kind: Deployment metadata: name: calico-kube-controllers namespace: kube-system labels: k8s-app: calico-kube-controllers spec: # The controllers can only have a single active instance. replicas: 1 selector: matchLabels: k8s-app: calico-kube-controllers strategy: type: Recreate template: metadata: name: calico-kube-controllers namespace: kube-system labels: k8s-app: calico-kube-controllers annotations: scheduler.alpha.kubernetes.io/critical-pod: '' spec: nodeSelector: beta.kubernetes.io/os: linux tolerations: # Mark the pod as a critical add-on for rescheduling. - key: CriticalAddonsOnly operator: Exists - key: node-role.kubernetes.io/master effect: NoSchedule serviceAccountName: calico-kube-controllers priorityClassName: system-cluster-critical # The controllers must run in the host network namespace so that # it isn't governed by policy that would prevent it from working. hostNetwork: true containers: - name: calico-kube-controllers image: calico/kube-controllers:v3.8.8 env: # The location of the etcd cluster. - name: ETCD_ENDPOINTS valueFrom: configMapKeyRef: name: calico-config key: etcd_endpoints # Location of the CA certificate for etcd. - name: ETCD_CA_CERT_FILE valueFrom: configMapKeyRef: name: calico-config key: etcd_ca # Location of the client key for etcd. - name: ETCD_KEY_FILE valueFrom: configMapKeyRef: name: calico-config key: etcd_key # Location of the client certificate for etcd. - name: ETCD_CERT_FILE valueFrom: configMapKeyRef: name: calico-config key: etcd_cert # Choose which controllers to run. - name: ENABLED_CONTROLLERS value: policy,namespace,serviceaccount,workloadendpoint,node volumeMounts: # Mount in the etcd TLS secrets. - mountPath: /calico-secrets name: etcd-certs readinessProbe: exec: command: - /usr/bin/check-status - -r volumes: # Mount in the etcd TLS secrets with mode 400. # See https://kubernetes.io/docs/concepts/configuration/secret/ - name: etcd-certs secret: secretName: calico-etcd-secrets defaultMode: 0400 --- apiVersion: v1 kind: ServiceAccount metadata: name: calico-kube-controllers namespace: kube-system --- # Source: calico/templates/calico-typha.yaml --- # Source: calico/templates/configure-canal.yaml --- # Source: calico/templates/kdd-crds.yaml