kubespray/roles/network_plugin/contiv/templates/contiv-netmaster.yml.j2

75 lines
2.2 KiB
Plaintext
Raw Normal View History

2018-09-17 22:45:05 +08:00
---
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
kind: DaemonSet
apiVersion: apps/v1
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
metadata:
name: contiv-netmaster
namespace: kube-system
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
labels:
k8s-app: contiv-netmaster
spec:
updateStrategy:
type: RollingUpdate
selector:
matchLabels:
k8s-app: contiv-netmaster
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
template:
metadata:
name: contiv-netmaster
namespace: kube-system
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
labels:
k8s-app: contiv-netmaster
spec:
priorityClassName: system-node-critical
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
# The netmaster must run in the host network namespace so that
# it isn't governed by policy that would prevent it from working.
hostNetwork: true
dnsPolicy: ClusterFirstWithHostNet
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
hostPID: true
nodeSelector:
node-role.kubernetes.io/master: ""
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
tolerations:
- operator: Exists
# Mark pod as critical for rescheduling (Will have no effect starting with kubernetes 1.12)
- key: CriticalAddonsOnly
operator: "Exists"
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
serviceAccountName: contiv-netmaster
containers:
- name: contiv-netmaster
image: {{ contiv_image_repo }}:{{ contiv_image_tag }}
env:
2018-09-17 22:45:05 +08:00
- name: CONTIV_ROLE
value: netmaster
- name: CONTIV_NETMASTER_MODE
value: kubernetes
- name: CONTIV_NETMASTER_ETCD_ENDPOINTS
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
valueFrom:
configMapKeyRef:
name: contiv-config
2018-09-17 22:45:05 +08:00
key: contiv_etcd
- name: CONTIV_NETMASTER_FORWARD_MODE
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
valueFrom:
configMapKeyRef:
name: contiv-config
2018-09-17 22:45:05 +08:00
key: contiv_fwdmode
- name: CONTIV_NETMASTER_NET_MODE
valueFrom:
configMapKeyRef:
name: contiv-config
key: contiv_netmode
- name: CONTIV_NETMASTER_LOG_LEVEL
valueFrom:
configMapKeyRef:
name: contiv-config
key: contiv_netmaster_loglevel
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
securityContext:
privileged: true
volumeMounts:
- mountPath: /var/contiv
name: var-contiv
readOnly: false
volumes:
# Used by contiv-netmaster
- name: var-contiv
hostPath:
path: /var/contiv