kubespray/roles/kubernetes-apps/network_plugin/contiv/tasks/configure.yml

114 lines
3.9 KiB
YAML
Raw Normal View History

contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
---
- name: Contiv | Wait for netmaster
uri:
url: "http://127.0.0.1:{{ contiv_netmaster_port }}/info"
register: result
until: result.status is defined and result.status == 200
retries: 10
delay: 5
- name: Contiv | Get global configuration
command: |
{{ bin_dir }}/netctl --netmaster "http://127.0.0.1:{{ contiv_netmaster_port }}" \
global info --json --all
register: global_config
run_once: true
changed_when: false
2019-05-16 15:27:43 +08:00
- name: Contiv | Set contiv_global_config
set_fact:
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
contiv_global_config: "{{ (global_config.stdout|from_json)[0] }}"
- name: Contiv | Set global forwarding mode
command: |
{{ bin_dir }}/netctl --netmaster "http://127.0.0.1:{{ contiv_netmaster_port }}" \
global set --fwd-mode={{ contiv_fwd_mode }}
when: "contiv_global_config.get('fwdMode', '') != contiv_fwd_mode"
run_once: true
- name: Contiv | Set global fabric mode
command: |
{{ bin_dir }}/netctl --netmaster "http://127.0.0.1:{{ contiv_netmaster_port }}" \
global set --fabric-mode={{ contiv_fabric_mode }}
when: "contiv_global_config.networkInfraType != contiv_fabric_mode"
run_once: true
2018-09-17 22:45:05 +08:00
- name: Contiv | Set peer hostname
set_fact:
contiv_peer_hostname: >-
{%- if override_system_hostname|default(true) -%}
{{ contiv_peer_hostname|default({})|combine({item: hostvars[item]['inventory_hostname']}) }}
{%- else -%}
{{ contiv_peer_hostname|default({})|combine({item: hostvars[item]['ansible_fqdn']}) }}
{%- endif -%}
with_items: "{{ groups['k8s-cluster'] }}"
run_once: true
when:
- contiv_fwd_mode == 'routing'
- contiv_peer_with_uplink_leaf
- name: Contiv | Get BGP configuration
command: |
{{ bin_dir }}/netctl --netmaster "http://127.0.0.1:{{ contiv_netmaster_port }}" \
bgp ls --json
register: bgp_config
run_once: true
changed_when: false
when:
- contiv_fwd_mode == 'routing'
- contiv_peer_with_uplink_leaf
- name: Contiv | Configure peering with router(s)
command: |
{{ bin_dir }}/netctl --netmaster "http://127.0.0.1:{{ contiv_netmaster_port }}" \
bgp create {{ item.value }} \
--router-ip="{{ hostvars[item.key]['contiv']['router_ip'] }}" \
--as="{{ hostvars[item.key]['contiv']['as'] | default(contiv_global_as) }}" \
--neighbor-as="{{ hostvars[item.key]['contiv']['neighbor_as'] | default(contiv_global_neighbor_as) }}" \
--neighbor="{{ hostvars[item.key]['contiv']['neighbor'] }}"
run_once: true
with_dict: "{{ contiv_peer_hostname }}"
when:
- contiv_fwd_mode == 'routing'
- contiv_peer_with_uplink_leaf
- bgp_config.stdout|from_json|length == 0 or not item.value in bgp_config.stdout|from_json|map(attribute='key')|list
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
- name: Contiv | Get existing networks
command: |
{{ bin_dir }}/netctl --netmaster "http://127.0.0.1:{{ contiv_netmaster_port }}" \
net ls -q
register: net_result
run_once: true
changed_when: false
- name: Contiv | Create networks
command: |
{{ bin_dir }}/netctl --netmaster "http://127.0.0.1:{{ contiv_netmaster_port }}" \
net create \
--encap={{ item.encap|default("vxlan") }} \
--gateway={{ item.gateway }} \
--nw-type={{ item.nw_type|default("data") }} \
--pkt-tag={{ item.pkt_tag|default("0") }} \
--subnet={{ item.subnet }} \
--tenant={{ item.tenant|default("default") }} \
"{{ item.name }}"
with_items: "{{ contiv_networks }}"
when: item['name'] not in net_result.stdout_lines
run_once: true
- name: Contiv | Check if default group exists
command: |
{{ bin_dir }}/netctl --netmaster "http://127.0.0.1:{{ contiv_netmaster_port }}" \
group ls -q
register: group_result
run_once: true
changed_when: false
- name: Contiv | Create default group
command: |
{{ bin_dir }}/netctl --netmaster "http://127.0.0.1:{{ contiv_netmaster_port }}" \
group create default-net default
when: "'default' not in group_result.stdout_lines"
run_once: true