contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
---
|
|
|
|
- name: Contiv | Load openvswitch kernel module
|
|
|
|
copy:
|
|
|
|
dest: /etc/modules-load.d/openvswitch.conf
|
|
|
|
content: "openvswitch"
|
|
|
|
notify:
|
|
|
|
- Contiv | Reload kernel modules
|
|
|
|
|
|
|
|
- name: Contiv | Create contiv etcd directories
|
|
|
|
file:
|
|
|
|
dest: "{{ item }}"
|
|
|
|
state: directory
|
|
|
|
mode: 0750
|
|
|
|
owner: root
|
|
|
|
group: root
|
|
|
|
with_items:
|
|
|
|
- "{{ contiv_etcd_conf_dir }}"
|
|
|
|
- "{{ contiv_etcd_data_dir }}"
|
2018-09-17 22:45:05 +08:00
|
|
|
when: inventory_hostname in groups['kube-master']
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
|
2018-09-17 22:45:05 +08:00
|
|
|
- name: Contiv | Workaround https://github.com/contiv/netplugin/issues/1152
|
|
|
|
set_fact:
|
|
|
|
kube_apiserver_endpoint_for_contiv: |-
|
|
|
|
{% if not is_kube_master and loadbalancer_apiserver_localhost -%}
|
2019-04-10 20:56:18 +08:00
|
|
|
https://localhost:{{ loadbalancer_apiserver_port|default(kube_apiserver_port) }}
|
2018-09-17 22:45:05 +08:00
|
|
|
{%- elif loadbalancer_apiserver is defined and loadbalancer_apiserver.port is defined -%}
|
|
|
|
https://{{ apiserver_loadbalancer_domain_name|default('lb-apiserver.kubernetes.local') }}
|
|
|
|
{%- if loadbalancer_apiserver.port|string != "443" -%}
|
|
|
|
:{{ loadbalancer_apiserver.port|default(kube_apiserver_port) }}
|
|
|
|
{%- endif -%}
|
|
|
|
{%- else -%}
|
|
|
|
https://{{ first_kube_master }}:{{ kube_apiserver_port }}
|
|
|
|
{%- endif %}
|
|
|
|
when: inventory_hostname in groups['kube-master']
|
|
|
|
|
|
|
|
- name: Contiv | Set necessary facts
|
|
|
|
set_fact:
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
contiv_config_dir: "{{ contiv_config_dir }}"
|
|
|
|
contiv_enable_api_proxy: "{{ contiv_enable_api_proxy }}"
|
|
|
|
contiv_fabric_mode: "{{ contiv_fabric_mode }}"
|
|
|
|
contiv_fwd_mode: "{{ contiv_fwd_mode }}"
|
|
|
|
contiv_netmaster_port: "{{ contiv_netmaster_port }}"
|
|
|
|
contiv_networks: "{{ contiv_networks }}"
|
|
|
|
contiv_manifests:
|
|
|
|
- {name: contiv-config, file: contiv-config.yml, type: configmap}
|
2018-09-17 22:45:05 +08:00
|
|
|
- {name: contiv-etcd, file: contiv-etcd.yml, type: daemonset}
|
|
|
|
- {name: contiv-etcd-proxy, file: contiv-etcd-proxy.yml, type: daemonset}
|
|
|
|
- {name: contiv-ovs, file: contiv-ovs.yml, type: daemonset}
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
- {name: contiv-netmaster, file: contiv-netmaster-clusterrolebinding.yml, type: clusterrolebinding}
|
|
|
|
- {name: contiv-netmaster, file: contiv-netmaster-clusterrole.yml, type: clusterrole}
|
|
|
|
- {name: contiv-netmaster, file: contiv-netmaster-serviceaccount.yml, type: serviceaccount}
|
2018-09-17 22:45:05 +08:00
|
|
|
- {name: contiv-netmaster, file: contiv-netmaster.yml, type: daemonset}
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
- {name: contiv-netplugin, file: contiv-netplugin-clusterrolebinding.yml, type: clusterrolebinding}
|
|
|
|
- {name: contiv-netplugin, file: contiv-netplugin-clusterrole.yml, type: clusterrole}
|
|
|
|
- {name: contiv-netplugin, file: contiv-netplugin-serviceaccount.yml, type: serviceaccount}
|
|
|
|
- {name: contiv-netplugin, file: contiv-netplugin.yml, type: daemonset}
|
2018-09-17 22:45:05 +08:00
|
|
|
when: inventory_hostname in groups['kube-master']
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
|
|
|
|
- set_fact:
|
|
|
|
contiv_manifests: |-
|
|
|
|
{% set _ = contiv_manifests.append({"name": "contiv-api-proxy", "file": "contiv-api-proxy.yml", "type": "daemonset"}) %}
|
|
|
|
{{ contiv_manifests }}
|
2018-09-17 22:45:05 +08:00
|
|
|
when:
|
|
|
|
- contiv_enable_api_proxy
|
|
|
|
- inventory_hostname in groups['kube-master']
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
|
|
|
|
- name: Contiv | Create /var/contiv
|
|
|
|
file:
|
|
|
|
path: /var/contiv
|
|
|
|
state: directory
|
|
|
|
|
|
|
|
- name: Contiv | Create contiv config directory
|
|
|
|
file:
|
|
|
|
dest: "{{ contiv_config_dir }}"
|
|
|
|
state: directory
|
|
|
|
mode: 0755
|
|
|
|
owner: root
|
|
|
|
group: root
|
2018-09-17 22:45:05 +08:00
|
|
|
when: inventory_hostname in groups['kube-master']
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
|
|
|
|
- name: Contiv | Install all Kubernetes resources
|
|
|
|
template:
|
|
|
|
src: "{{ item.file }}.j2"
|
|
|
|
dest: "{{ contiv_config_dir }}/{{ item.file }}"
|
|
|
|
with_items: "{{ contiv_manifests }}"
|
|
|
|
register: contiv_manifests_results
|
2018-09-17 22:45:05 +08:00
|
|
|
when: inventory_hostname in groups['kube-master']
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
|
2018-10-09 19:43:30 +08:00
|
|
|
- name: Contiv | Copy certs generation script
|
|
|
|
template:
|
|
|
|
src: "generate-certificate.sh.j2"
|
|
|
|
dest: "/var/contiv/generate-certificate.sh"
|
|
|
|
mode: 0700
|
|
|
|
when:
|
|
|
|
- contiv_enable_api_proxy
|
|
|
|
- contiv_generate_certificate
|
|
|
|
delegate_to: "{{ groups['kube-master'][0] }}"
|
|
|
|
run_once: true
|
|
|
|
|
2018-10-17 06:34:33 +08:00
|
|
|
- name: Contiv | Check for cert key existence
|
|
|
|
stat:
|
|
|
|
path: /var/contiv/auth_proxy_key.pem
|
|
|
|
register: contiv_certificate_key_state
|
|
|
|
when:
|
|
|
|
- contiv_enable_api_proxy
|
|
|
|
- contiv_generate_certificate
|
|
|
|
delegate_to: "{{ groups['kube-master'][0] }}"
|
|
|
|
run_once: true
|
|
|
|
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
- name: Contiv | Generate contiv-api-proxy certificates
|
2018-10-17 06:34:33 +08:00
|
|
|
command: /var/contiv/generate-certificate.sh
|
2018-09-17 22:45:05 +08:00
|
|
|
when:
|
|
|
|
- contiv_enable_api_proxy
|
|
|
|
- contiv_generate_certificate
|
2018-10-17 06:34:33 +08:00
|
|
|
- (not contiv_certificate_key_state.stat.exists)
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
delegate_to: "{{ groups['kube-master'][0] }}"
|
|
|
|
run_once: true
|
|
|
|
|
|
|
|
- name: Contiv | Fetch the generated certificate
|
|
|
|
fetch:
|
|
|
|
src: "/var/contiv/{{ item }}"
|
|
|
|
dest: "/tmp/kubespray-contiv-{{ item }}"
|
|
|
|
flat: yes
|
|
|
|
with_items:
|
|
|
|
- auth_proxy_key.pem
|
|
|
|
- auth_proxy_cert.pem
|
2018-09-17 22:45:05 +08:00
|
|
|
when:
|
|
|
|
- contiv_enable_api_proxy
|
|
|
|
- contiv_generate_certificate
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
delegate_to: "{{ groups['kube-master'][0] }}"
|
|
|
|
run_once: true
|
|
|
|
|
|
|
|
- name: Contiv | Copy the generated certificate on nodes
|
|
|
|
copy:
|
|
|
|
src: "/tmp/kubespray-contiv-{{ item }}"
|
|
|
|
dest: "/var/contiv/{{ item }}"
|
|
|
|
with_items:
|
|
|
|
- auth_proxy_key.pem
|
|
|
|
- auth_proxy_cert.pem
|
2018-09-17 22:45:05 +08:00
|
|
|
when:
|
|
|
|
- inventory_hostname != groups['kube-master'][0]
|
|
|
|
- inventory_hostname in groups['kube-master']
|
|
|
|
- contiv_enable_api_proxy
|
|
|
|
- contiv_generate_certificate
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
|
2018-12-03 18:22:17 +08:00
|
|
|
- name: Contiv | Set cni directory permissions
|
|
|
|
file:
|
|
|
|
path: /opt/cni/bin
|
|
|
|
state: directory
|
|
|
|
owner: kube
|
|
|
|
recurse: true
|
|
|
|
mode: 0755
|
|
|
|
|
|
|
|
- name: Contiv | Copy cni plugins
|
|
|
|
unarchive:
|
|
|
|
src: "{{ local_release_dir }}/cni-plugins-{{ image_arch }}-{{ cni_version }}.tgz"
|
|
|
|
dest: "/opt/cni/bin"
|
|
|
|
mode: 0755
|
|
|
|
remote_src: yes
|
contiv network support (#1914)
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 22:24:16 +08:00
|
|
|
|
|
|
|
- name: Contiv | Copy netctl binary from docker container
|
|
|
|
command: sh -c "{{ docker_bin_dir }}/docker rm -f netctl-binarycopy;
|
|
|
|
{{ docker_bin_dir }}/docker create --name netctl-binarycopy {{ contiv_image_repo }}:{{ contiv_image_tag }} &&
|
|
|
|
{{ docker_bin_dir }}/docker cp netctl-binarycopy:/contiv/bin/netctl {{ bin_dir }}/netctl &&
|
|
|
|
{{ docker_bin_dir }}/docker rm -f netctl-binarycopy"
|
|
|
|
register: contiv_task_result
|
|
|
|
until: contiv_task_result.rc == 0
|
|
|
|
retries: 4
|
|
|
|
delay: "{{ retry_stagger | random + 3 }}"
|
|
|
|
changed_when: false
|