Calico Docs: clarify the algorithm to calculate calico_veth_mtu (#7749)

* Claico Docs: clarify the algorithm to calculate calico_veth_mtu

* Update sample calico_veth_mtu
pull/7754/head
Cristian Calin 2021-06-28 09:59:25 +03:00 committed by GitHub
parent a3e34f589a
commit 05d864c913
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 17 additions and 4 deletions

View File

@ -219,6 +219,19 @@ calico_vxlan_mode: 'Never'
If you use VXLAN mode, BGP networking is not required. You can disable BGP to reduce the moving parts in your cluster by `calico_network_backend: vxlan`
## Configuring interface MTU
This is an advanced topic and should usually not be modified unless you know exactly what you are doing. Calico is smart enough to deal with the defaults and calculate the proper MTU. If you do need to set up a custom MTU you can change `calico_veth_mtu` as follows:
* If Wireguard is enabled, subtract 60 from your network MTU (i.e. 1500-60=1440)
* If using VXLAN or BPF mode is enabled, subtract 50 from your network MTU (i.e. 1500-50=1450)
* If using IPIP, subtract 20 from your network MTU (i.e. 1500-20=1480)
* if not using any encapsulation, set to your network MTU (i.e. 1500 or 9000)
```yaml
calico_veth_mtu: 1440
```
## Cloud providers configuration
Please refer to the official documentation, for example [GCE configuration](http://docs.projectcalico.org/v1.5/getting-started/docker/installation/gce) requires a security rule for calico ip-ip tunnels. Note, calico is always configured with ``calico_ipip_mode: Always`` if the cloud provider was defined.

View File

@ -36,10 +36,10 @@
# calico_mtu: 1500
# Configure the MTU to use for workload interfaces and tunnels.
# - If Wireguard is enabled, set to your network MTU - 60
# - Otherwise, if VXLAN or BPF mode is enabled, set to your network MTU - 50
# - Otherwise, if IPIP is enabled, set to your network MTU - 20
# - Otherwise, if not using any encapsulation, set to your network MTU.
# - If Wireguard is enabled, subtract 60 from your network MTU (i.e 1500-60=1440)
# - Otherwise, if VXLAN or BPF mode is enabled, subtract 50 from your network MTU (i.e. 1500-50=1450)
# - Otherwise, if IPIP is enabled, subtract 20 from your network MTU (i.e. 1500-20=1480)
# - Otherwise, if not using any encapsulation, set to your network MTU (i.e. 1500)
# calico_veth_mtu: 1440
# Advertise Cluster IPs