* Disable control plane allocating podCIDR for nodes when using calico
Calico does not use the .spec.podCIDR field for its IP address
management.
Furthermore, it can false positives from the kube controller manager if
kube_network_node_prefix and calico_pool_blocksize are unaligned, which
is the case with the default shipped by kubespray.
If the subnets obtained from using kube_network_node_prefix are bigger,
this would result at some point in the control plane thinking it does
not have subnets left for a new node, while calico will work without
problems.
Explicitely set a default value of false for calico_ipam_host_local to
facilitate its use in templates.
* Don't default to kube_network_node_prefix for calico_pool_blocksize
They have different semantics: kube_network_node_prefix is intended to
be the size of the subnet for all pods on a node, while there can be
more than on calico block of the specified size (they are allocated on
demand).
Besides, this commit does not actually change anything, because the
current code is buggy: we don't ever default to
kube_network_node_prefix, since the variable is defined in the role
defaults.
* Mask systemd swap.target do disable swap
This is a more generic way to disable swap, since it pulls .swap units
in systemd distributions; fstab is only one way to generate .swap units.
* Unconditionally disable swap
We only care to disable it (the "swapon" registered variable is not used
anywhere else.
This allows to get rid of the ignore_errors, since this was added
because swapon.stdout does not exist in check_mode (see issue #6642).
* Don't explicitly disable swapOnZram
We're already masking the swap.target, which would pull the zram unit,
hence no need to handle zram-generator specifically.
* Try both conntrack modules instead of checking kernel version
Depending on kernel distributor, the kernel version might not be a
correct indicator of the conntrack module use.
Instead, we check both (and use the first found).
* Use modproble.persistent rather than manual persistence
* Validate systemd unit files
This ensure that we fail early if we have a bad systemd unit file
(syntax error, using a version not available in the local version, etc)
* Hack to check systemd version for service files validation
factory-reset.target was introduced in system 250, same version as the
aliasing feature we need for verifying systemd services with ansible.
So we only actually executes the validation if that target is present.
This is an horrible hack which should be reverted as soon as we drop
support for distributions with systemd<250.
* Use RandomizedDelaySec to spread out control certificates renewal plane
If the number of control plane node is superior to 6, using (index * 10
minutes) will fail (03:60:00 is not a valid timestamp).
Compared to just fixing the jinja expression (to use a modulo for
example), this should avoid having two control planes certificates
update node being triggered at the same time.
* Make k8s-certs-renew.timer Persistent
If the control plane happens to be offline during the scheduled
certificates renewal (node failure or anything like that), we still want
the renewal to happen.
* containerd: refactor handlers to use 'listen'
* cri-dockerd: refactor handlers to use 'listen'
* cri-o: refactor handlers to use 'listen'
* docker: refactor handlers to use 'listen'
* etcd: refactor handlers to use 'listen'
* control-plane: refactor handlers to use 'listen'
* kubeadm: refactor handlers to use 'listen'
* node: refactor handlers to use 'listen'
* preinstall: refactor handlers to use 'listen'
* calico: refactor handlers to use 'listen'
* kube-router: refactor handlers to use 'listen'
* macvlan: refactor handlers to use 'listen'
It was not 'false', which made some tasks (e.g. using systemd-resolved
template) to effectively remove default search domains; caused DNS loop
after rebooting the node/restarting cluster, so localdns service didn't
run correctly.
* Migrate node-role.kubernetes.io/master to node-role.kubernetes.io/control-plane
* Migrate node-role.kubernetes.io/master to node-role.kubernetes.io/control-plane
* Migrate node-role.kubernetes.io/master to node-role.kubernetes.io/control-plane
when people run playbook with option `--tags=kubelet`, the kubelet config may changed, because some variables used in task populating `kubelet-config.yml` could be different with running task(`Fetch facts`)
* tests: replace fedora35 with fedora37
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* tests: replace fedora36 with fedora38
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* docs: update fedora version in docs
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* molecule: upgrade fedora version
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* tests: upgrade fedora images for vagrant and kubevirt
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* vagrant: workaround to fix private network ip address in fedora
Fedora stop supporting syconfig network script so we added a workaround
here
https://github.com/hashicorp/vagrant/issues/12762#issuecomment-1535957837
to fix it.
* netowrkmanager: do not configure dns if using systemd-resolved
We should not configure dns if we point to systemd-resolved.
Systemd-resolved is using NetworkManager to infer the upstream DNS
server so if we set NetworkManager to 127.0.0.53 it will prevent
systemd-resolved to get the correct network DNS server.
Thus if we are in this case we just don't set this setting.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* image-builder: update centos7 image
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* gitlab-ci: mark fedora packet jobs as allow failure
Fedora networking is still broken on Packet, let's mark it as allow
failure for now.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix ansible-lint name
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: ignore jinja template error in names
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: capitalize ansible name
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: update notify after name capitalization
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix var-spacing ansible rule
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix spacing on the beginning/end of jinja template
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix spacing of default filter
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix spacing between filter arguments
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix double space at beginning/end of jinja
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix remaining jinja[spacing] ansible-lint warning
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: update all dependencies including ansible
Upgrade to ansible 7.x and ansible-core 2.14.x. There seems to be issue
with ansible 8/ansible-core 2.15 so we remain on those versions for now.
It's quite a big bump already anyway.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* tests: install aws galaxy collection
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* ansible-lint: disable various rules after ansible upgrade
Temporarily disable a bunch of linting action following ansible upgrade.
Those should be taken care of separately.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve deprecated-module ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve no-free-form ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve schema[meta] ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve schema[playbook] ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve schema[tasks] ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve risky-file-permissions ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve risky-shell-pipe ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: remove deprecated warn args
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: use fqcn for non builtin tasks
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve syntax-check[missing-file] for contrib playbook
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: use arithmetic inside jinja to fix ansible 6 upgrade
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* Fix `The task includes an option with an undefined variable` for 1.27
* delete old flag --container-runtime
Signed-off-by: Victor Login <batazor@evrone.com>
---------
Signed-off-by: Victor Login <batazor@evrone.com>
According to the canal github[1] the repo is not maintained over 5 years.
In addition, the README says
```
Originally, we thought we might more deeply integrate the two projects
(possibly even going as far as a rebranding!). However, over time it
became clear that that wasn't really necessary to fulfil our goal of
making them work well together. Ultimately, we decided to focus on
adding features to both projects rather than doing work just to
combine them.
```
So it is difficult to support canal by Kubespray at this situation.
[1]: https://github.com/projectcalico/canal
* node: fix default kubelet/runtime cgroups when kube_reserved is false (default)
Commit 1c4db6132d introduced a notion of
kube_reserved. This introduced a breaking change defaulting to use
kube.slice for the container_manager and the kubelet as if kube_reserved
was always enabled whereas it is disabled by default.
This commit fixes this by bringing back system.slice whenever
kube_reserved is disabled.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* inventory/sample: change false for kube_reserved as its the default
Changing the commented value in sample inventory to the actual default
value.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* network_plugin/custom_cni: add CNI to apply provided manifests
Add a new simple custom_cni to install provided Kubernetes manifests.
This could be useful to use manifests directly provided by a CNI when
there are not support by Kubespray (i.e.: helm chart or any other manifests
generation method).
Co-authored-by: James Landrein <james.landrein@proton.ch>
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* network_plugin/custom_cni: add test with cilium
Co-authored-by: James Landrein <james.landrein@proton.ch>
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
Co-authored-by: James Landrein <james.landrein@proton.ch>
This commit uses a kubeadm join config to pull down cert for etcd in
workers nodes (which is needed in some circumstances, for instance with
calico or cilium).
The previous way didn't allow us to pass certain parameters which was
typically given in the config in other kubeadm invokations in Kubespray.
This made kubeadm produced some errors for some edge cases.
For example, in our deployment we don't have a default route and even
though it's only to download the certificates, kubeadm produce an error
`unable to select an IP from default routes` (these command are kubeadm
controlplane command, so kubeadm does some additional checks). This is
fixed by specifying `advertiseAddress` within the kubeadm config.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* optimize cgroups settings for node reserved
* fix
* set cgroup slice for multi container engine
* set cgroup slice for crio
* add reserved cgroups variables to sample files
* Compatible with cgroup path for different container managers
* add cgroups doc
* fix markdown
* Fix inconsistent handling of admission plugin list
* Adjust hardening doc with the normalized admission plugin list
* Add pre-check for admission plugins format change
* Ignore checking admission plugins value when variable is not defined
* Support kubeadm patches in v1beta3
* Update kubeadm patches sample files in inventory
* Fix pre-commit syntax
* Set kubeadm_patches enabled to false in sample inventory
* Add the option to enable default Pod Security Configuration
Enable Pod Security in all namespaces by default with the option to
exempt some namespaces. Without the change only namespaces explicitly
configured will receive the admission plugin treatment.
* Fix the PR according to code review comments
* Revert the latest changes
- leave the empty file when kube_pod_security_use_default, but add comment explaining the empty file
- don't attempt magic at conditionally adding PodSecurity to kube_apiserver_admission_plugins_needs_configuration
The commit 1ce2f04 tried to merge multiple SUSE OS checks including
"openSUSE Leap" and "openSUSE Tumbleweed" into a single SUSE, but
that was a perfect change.
Then the commit c16efc9 tried to fix it for "openSUSE Leap", but it
didn't take care of "openSUSE Tumbleweed".
Then this adds "openSUSE Tumbleweed" to the OS check.
* feat: make kubernetes owner parametrized
* docs: update hardening guide with configuration for CIS 1.1.19
* fix: set etcd data directory permissions to be compliant to CIS 1.1.12
* extra admission controls now don't have a version in their file names
eventratelimit.v1beta2.yaml.j2 -> eventratelimit.yaml.j2
* cri_socket variable includes the unix:// prefix to be conformat with
upstream
Louis Tu
Kay Yan
Andrei Costescu
Max Gautier
jandres - moscardo
piwinkler
Samuel Liu
AbhishekKr
Samuel Mutel
borgiacis
Hedayat Vatankhah (هدایت)
yun
Unai Arríen
Ugur Can Ozturk
Mohamed Omar Zaian
Jason Witkowski
Qasim Mehmood
NierYYDS
蔣 航
tenni
R. P. Taylor
Arthur Outhenin-Chalandre
Francisco Orselli
satandyh
Tiago Epifânio
peterw
ERIK
Pat Riehecky
Victor Login
Kenichi Omichi
Mikhail Gorozhin
Manuelraa
Kay Yan
HirazawaUi
Marijn van der Giesen
Jack
panguicai
Maxime Leroy
Mykola Ulianytskyi (Nikolay Ulyanitsky)
Bas
Haitian Chen
Tristan
Florian Ruynat
Cyclinder
mKlaris
Shelming.Song
Kevin Huang
C-Romeo
Lukas Najman
Jiffs Maverick
lijin-union
William Turner
Wouter Goedhart
Cristian Calin
Huang Chen-Yi
William Turner
Eugene Artemenko
Emin AKTAS
Zhong Jianxin
Kei Kori
cleverhu
Krystian Młynek
Alessio Greggi
Tomas Zvala
Ho Kim
h9-HSFRQDH
Citrullin
Calin Cristian Andrei