* AlmaLinux: ansible>2.9.19 is needed to know about AlmaLinux
* AlmaLinux: identify as a centos derrivative
* AlmaLinux: add AlmaLinux to checks for CentOS
* Use ansible_os_family to compare family and not distribution
DNSSEC is off by default on ubuntu/bionic64 (18.04) as per resolved.conf(5).
These tasks are artefacts of obsolete infra configuration, and no longer needed.
Further removing these tasks resolves the issue that the tasks always reports
'changed' and bounces systemd-resolved unneccesarily, even if there was no
actual modification of /etc/systemd/resolved.conf.
By default Ansible stat module compute checksum, list extended attributes and find mime type
To find all stat invocations that really use one of those:
git grep -F stat. | grep -vE 'stat.(islnk|exists|lnk_source|writeable)'
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
This was introduced in 143e2272ff
Extra repo is enabled by default in CentOS, and is not the right repo for EL8
Instead of adding a CentOS repo to RHEL, enable the needed RHEL repos with rhsm_repository
For RHEL 7, we need the "extras" repo for container-selinux
For RHEL 8, we need the "appstream" repo for container-selinux, ipvsadm and socat
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
no_proxy is a pain to get right, and having proxy variables present causes issues
(k8s components get proxy configuration after upgrade, see #7100)
It's better to only configure what require proxy:
- the runtime (containerd/docker/crio)
- the package manager + apt_key
- the download tasks
Tested with the following clusters
- 4 CentOS 8 nodes
- 1 Ubuntu 20.04 node
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Improve how we set 'proxy=' in yum.conf or dnf.conf
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Fixup spaces in no_proxy
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Add svc,svc.{{ dns_domain }} to no_proxy
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Remove because of empty need_http_proxy.rc if http/https_proxy and skip_http_proxy_on_os_packages=true is set
* Modify sample for debian and centos skip_http_proxy
* Modify sample for debian and centos skip_http_proxy
* Fedora CoreOS: Fix for ethtool pre-installed
Fix error in rpm-ostree when ethtool is already insatlled (FCOS >= 32.20201104.3.0)
* Fedora CoreOS: Fix connection lost
Fedora CoreOS: Ignore connection lost due to reboot and continues the playbook
* Adding option to disable gloablly applying a proxy to etc/yum.conf
* Change made to proxy_yum_globaly basedon reviewer feedback
* fix trailing spaces in ymllint
* remove podman cni plugin
* configure networkamanger global dns
* allow installation of python3-libselinux by disabling update repo temporary
* remove ipv4 section because it is not a valid configuration
* Add oraclelinux8 and disable firewalld
Add oraclelinux8 image and disable firewalld on oraclelinux VMs
* Fix Oracle Linux repositories
As documented in: http://yum.oracle.com/getting-started.html#installing-software-from-oracle-linux-yum-server
public-yum-ol7.repo was deprecated on release 7.6. Some repos were integrated into oracle-linux-ol7.repo (i.e.: ol7_latest, ol7_addons) and other are available as packages (epel). This also adds support for oraclelinux8
* Fix to use ansible_distribution_version
Instead of ansible_distribution_major_version
* Update README.md
The playbook that bootstrap openSUSE servers assumes that the
/etc/sysconfig/proxy file exists but the execution fails when
these file is not present. This change guarantees its existence.
* Fix proxy and module_hotfixes
On CentOS 8 with proxy ansible render inline `proxy` and `module_hotfixes` options.
For example:
`proxy=http://127.0.0.1:3128module_hotfixes=True`
But expected result:
```
proxy=http://127.0.0.1:3128
module_hotfixes=True
```
* Use ini_file module for work with ini files
* Prevent duplicates proxy= option in /etc/yum.conf
Module `lineinfile` is weak, use most powerful module `ini_file` and add or remove `proxy=` when `http_proxy` is defined or not.
* fedora coreos support
- bootstrap and new fact for
* fedora coreos support
- fix bootstrap condition
* fedora coreos support
- allow customize packages for fedora coreos bootstrap
* fedora coreos support
- prevent install ptyhon3 and epel via dnf for fedora coreos
* fedora coreos support
- handle all ostree like os in same way
* fedora coreos support
- handle all ostree like os in same way for crio
* fedora coreos support
- add fcos documentations
The 'regexp' parameter matches last occurrence of a line starting with 'proxy=' and replaces it with the one defined in 'line' parameter. If no match - it works same way as before. This fixes resuming cluster deployments failed after that task (if there was no more than one line starting with 'proxy' in the yum.conf file - this condition should also be reassured with the change introduced here) eg. if they were initiated with Terraform.
* Fix python3-libselinux installation for RHEL/CentOS 8
In bootstrap-centos.yml we haven't gathered the facts,
so #5127 couldn't work
Minimum ansible version to run kubespray is 2.7.8,
so ansible_distribution_major_version is defined an there is no need to default it
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Restart NetworkManager for RHEL/CentOS 8
network.service doesn't exist anymore
# systemctl status network
Unit network.service could not be found.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Add module_hotfixes=True to docker / containerd yum repo config
https://bugzilla.redhat.com/show_bug.cgi?id=1734081https://bugzilla.redhat.com/show_bug.cgi?id=1756473
Without this setting you end up with the following error:
# yum install docker-ce
Failed to set locale, defaulting to C
Last metadata expiration check: 0:03:21 ago on Thu Sep 26 22:00:05 2019.
Error:
Problem: package docker-ce-3:19.03.2-3.el7.x86_64 requires containerd.io >= 1.2.2-3, but none of the providers can be installed
- cannot install the best candidate for the job
- package containerd.io-1.2.2-3.3.el7.x86_64 is excluded
- package containerd.io-1.2.2-3.el7.x86_64 is excluded
- package containerd.io-1.2.4-3.1.el7.x86_64 is excluded
- package containerd.io-1.2.5-3.1.el7.x86_64 is excluded
- package containerd.io-1.2.6-3.3.el7.x86_64 is excluded
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Use python3-libselinux on RHEL8/Centos8
* The fact ansible_facts.distribution_major_version is not present on older Ansible version.
Default it to 0 in when not present and use libselinux-python as package to get current
default behaviour.
Updated Openstack to terraform 0.12 (#5062)
* update openstack to terraform 0.12(.5)
* replace cluter.tf with cluster.tfvars
* update README.md to terraform 0.12
* update Openstack CI tests to use terraform 0.12
* specify terraform version in openstack README
* gitlab CI to copy cluster.tfvars in case of openstack provider
* The terraform/openstack dynamic inventory can read
tfstate v4 (generated by terraform 0.12) and convert them internally
ro v3 (as generated by terraform 0.11.x).
Additionally the script has been updated to Python 3.
* Add README to bootstrap-os role
* Rework bootstrap-os once more
* Document workarounds for bugs/deficiencies in Ansible modules
* Unify and document role variables
* Remove installation of additional packages and repositories
* Merge Ubuntu and Debian tasks
* Remove pipelining setting from default playbooks
* Fix OpenSUSE not running its required tasks
The docker service provided by the containers-basic bundle is masked
in ClearLinux distribution. This is causing errors in the following
steps. This commit ensures that the unit is not masked.
* Vagrantfile: Bump openSUSE to Leap 15.0
* roles: container-engine: Add 'containerd' package for openSUSE
The 'containerd' package contains the docker-containerd and
docker-containerd-shim binaries. We also need to ensure that the latest
version is installed since an older version may already be present (eg GCE
images)
* Remove docker log-opts for opensuse
* roles: bootstrap-os: Use lowercase 'o' for openSUSE
OpenSUSE is not a valid family name. The correct one is openSUSE
* roles: bootstrap-os: Update zypper cache before first installation
The zypper cache may be outdated so ensure that it's fully updated
before we try and install the bootstrap packages.
* bootstrap: rework role
* support being called from a non-root user
* run some commands in check mode
* unify spelling/task names
* bootstrap: fix wording of comments for check_mode: false
* bootstrap: remove setup-pipelining task
Looks like `epel_enabled` was not configured for the epel install in `bootstrap-centos.yml`. Also, there were no conditionals that would trigger bootstrap for RHEL.
Cristian Calin
Florian Ruynat
Terry
Etienne Champetier
Vyacheslav
Sander Cornelissen
Etienne Champetier
flix444
marcosfsch
Barry Melbourne
wand3r3r
spaced
Maxime Guyot
Danilo Riecken P. de Morais
Victor Morales
aharrisson
Denis Kadyshev
dymq
Sylvain Chateau
Richard Arends
ewtang
Mark Janssen
Vincent Link
Jeff Bornemann
MarkusTeufelberger
MarkusTeufelberger
Victor Morales
Jugwan Eom
Markos Chandras
Qasim Sarfraz
Manuel Cintron
Chad Swenson