* Add Rocky as a known OS
* Make sure Rocky includes bootstrap-centos.yml
* Update docs with Rocky Linux
* Rocky Linux wireguard and EPEL
* Rocky Linux in the list of supported distributions
to remove deprecation warning:
> Flag --feature-gates has been deprecated, This parameter should be set via the config file specified by the Kubelet's --config flag.
Kubespray deployment failed when using containerd backend on nodes that apparmor was not installed or previously removed. This PR ensure apparmor is installed by adding it into required_pkgs var.
Kubespray deployment failed when using containerd backend on nodes that apparmor was not installed or previously removed. This PR ensure apparmor is installed by adding it into required_pkgs var.
The path of kubeconfig should be configurable, and its default value
is /etc/kubernetes/admin.conf. Most paths of the file are configurable
but some were not. This make those configurable.
* Calico: make calico_min_version check relevant
* Calico: only check currently installed version against the oldest supported version by the previous release
On Debian 11, `ipset` just recommend `iptables` so on the system that apt is configured with `APT::Install-Recommends "0";` iptables will not install automatically.
* Fedora and RHEL use etc_t and the convention is <type_name>_t
* Docs: specify all values for preinstall_selinux_state
* CI: Add Fedora 34 with SELinux in enforcing mode
* Ansible: move to Ansible 3.4.0 which uses ansible-base 2.10.10
* Docs: add a note about ansible upgrade post 2.9.x
* CI: ensure ansible is removed before ansible 3.x is installed to avoid pip failures
* Ansible: use newer ansible-lint
* Fix ansible-lint 5.0.11 found issues
* syntax issues
* risky-file-permissions
* var-naming
* role-name
* molecule tests
* Mitogen: use 0.3.0rc1 which adds support for ansible 2.10+
* Pin ansible-base to 2.10.11 to get package fix on RHEL8
* Calico: align manifests with upstream
* allow enabling typha prometheus metrics
* Calico: enable eBPF support
* manage the kubernetes-services-endpoint configmap
* Calico: document the use of eBPF dataplane
* Calico: improve checks before deployment
* enforce disabling kube-proxy when using eBPF dataplane
* ensure calico_version is supported
follow new naming conventions for gcr's coredns image.
starting from 1.21 kubeadm assumes it to be `coredns/coredns`:
this causes the kubeadm deployment being unable to pull image, beacuse `v`
was also added in image tag, until the role `kubernetes-apps` ovverides
it with the old name, which is only compatible with <=1.7.
Backward comptability with kubeadm <=1.20 is mantained checking
kubernetes version and falling back to old names (`coredns:1.xx`) when
the version is less than 1.21
* rename ansible groups to use _ instead of -
k8s-cluster -> k8s_cluster
k8s-node -> k8s_node
calico-rr -> calico_rr
no-floating -> no_floating
Note: kube-node,k8s-cluster groups in upgrade CI
need clean-up after v2.16 is tagged
* ensure old groups are mapped to the new ones
* AlmaLinux: ansible>2.9.19 is needed to know about AlmaLinux
* AlmaLinux: identify as a centos derrivative
* AlmaLinux: add AlmaLinux to checks for CentOS
* Use ansible_os_family to compare family and not distribution
* Add KubeSchedulerConfiguration for k8s 1.19 and up
With release of version 1.19.0 of kubernetes KubeSchedulerConfiguration
was graduated to beta. It allows to extend different stages of
scheduling with profiles. Such effect is achieved by using plugins and
extensions.
This patch adds KubeSchedulerConfiguration for versions 1.19 and later.
Configuration is set to k8s defaults or to kubespray vars. Moving those
defaults to new vars will be done in following patch.
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
* KubeSchedulerConfiguration: add defaults
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
* Remove contrib/vault
This is marked as broken since 2018 / 3dcb914607
This still reference apiserver.pem, not used since ddffdb63bf
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Finish nuking vault from the codebase
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
This replaces kube-master with kube_control_plane because of [1]:
The Kubernetes project is moving away from wording that is
considered offensive. A new working group WG Naming was created
to track this work, and the word "master" was declared as offensive.
A proposal was formalized for replacing the word "master" with
"control plane". This means it should be removed from source code,
documentation, and user-facing configuration from Kubernetes and
its sub-projects.
NOTE: The reason why this changes it to kube_control_plane not
kube-control-plane is for valid group names on ansible.
[1]: https://github.com/kubernetes/enhancements/blob/master/keps/sig-cluster-lifecycle/kubeadm/2067-rename-master-label-taint/README.md#motivation
While at it remove force_certificate_regeneration
This boolean only forced the renewal of the apiserver certs
Either manually use k8s-certs-renew.sh or set auto_renew_certificates
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
The important action in kubeadm-version.yml is the templating of the configuration,
not finding / setting the version
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
kubeadm is the default for a long time now,
and admin.conf is created by it, so let kubeadm handle it
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Using `kubeadm init phase kubeconfig all` breaks kubelet client certificate rotation
as we are missing `kubeadm init phase kubelet-finalize all` to point to `kubelet-client-current.pem`
kubeconfig format is stable so let's just use lineinfile,
this will avoid other future breakage
This revert to the logic before 6fe2248314
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
On CentOS 8 they seem to be ignored by default, but better be extra safe
This also make it easy to exclude other network plugin interfaces
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Since a790935d02 all proxy users
should be properly configured
Now when you have *_PROXY vars in your environment it can leads to failure
if NO_PROXY is not correct, or to persistent configuration changes
as seen with kubeadm in 1c5391dda7
Instead of playing constant whack-a-bug, inject empty *_PROXY vars everywhere
at the play level, and override at the task level when needed
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Move proxy_env to kubespray-defaults/defaults
There is no reasons to use set_facts here
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Ensure kubeadm doesn't use proxy
*_proxy variables might be present in the environment (/etc/environment, bash profile, ...)
When this is the case we end up with those proxy configuration in /etc/kubernetes/manifests/kube-*.yaml manifests
We cannot unset env variables, but kubeadm is nice enough to ignore empty vars
93d288e2a4/cmd/kubeadm/app/util/env.go (L27)
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
By default Ansible stat module compute checksum, list extended attributes and find mime type
To find all stat invocations that really use one of those:
git grep -F stat. | grep -vE 'stat.(islnk|exists|lnk_source|writeable)'
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Only checking the kubernetes api on the first master when upgrading is not enough.
Each master needs to be checked before it's upgrade.
Signed-off-by: Rick Haan <rickhaan94@gmail.com>
In some environments, it might not be possible to ping the IP address
of the nodes, e.g., because ICMP echo is blocked.
This commit allows kubespray to be configured to disable the ping
check, while performing all other checks.
This fixes the following warning:
[kubernetes/client : Generate admin kubeconfig with external api endpoint]
[WARNING]: Consider using the file module with state=directory rather than
running 'mkdir'. If you need to use command because file is insufficient
you can
RedHat 8.3 merged nf_conntrack_ipv4 in nf_conntrack but still advertise 4.18
so just try to modprobe and decide depending on the success
Also nf_conntrack is a dependency of ip_vs, so no need to care about it
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* copying ssh key no longer required, works with password auth
* use copy module instead of synchronize (which requires sshpass)
* less tasks and always changed tasks
If crictl (and docker) binaries are deployed to the directories
that are not in standard PATH (e.g. /usr/local/bin), it is required
to specify full path to the binaries.
The task outputs the following warning:
TASK [kubernetes/preinstall : Enable ip forwarding]
[WARNING]: The value 1 (type int) in a string field was converted
to u'1' (type string). If this does not look like what you expect,
quote the entire value to ensure it does not change.
* fix flake8 errors in Kubespray CI - tox-inventory-builder
* Invalidate CRI-O kubic repo's cache
Signed-off-by: Victor Morales <v.morales@samsung.com>
* add support to configure pkg install retries
and use in CI job tf-ovh_ubuntu18-calico (due to it failing often)
* Switch Calico, Cilium and MetalLB image repos to Quay.io
Co-authored-by: Victor Morales <v.morales@samsung.com>
Co-authored-by: Barry Melbourne <9964974+bmelbourne@users.noreply.github.com>
* create a wrapper script with pki options
* supports all kubespray managed container engines
Co-authored-by: Hans Feldt <hafe@users.noreply.github.com>
* Allow the eventRecordQPS setting to be set.
The eventRecordQPS parameter controls rate limiting for event recording. When zero, unlimited events can cause denial-of-service situations. For my situation, I don't need more than a setting of "5". This change allows me to configure the setting before creating the cluster.
* Allow the eventRecordQPS setting to be set.
The default settings (see types.go) is five. So, this change does not affect the cluster provisioning. However, it does allow for the setting to be changed.
* Enable Kata Containers for CRI-O runtime
Kata Containers is an OCI runtime where containers are run inside
lightweight VMs. This runtime has been enabled for containerd runtime
thru the kata_containers_enabled variable. This change enables Kata
Containers to CRI-O container runtime.
Signed-off-by: Victor Morales <v.morales@samsung.com>
* Set appropiate conmon_cgroup when crio_cgroup_manager is 'cgroupfs'
* Set manage_ns_lifecycle=true when KataContainers is enabed
* Add preinstall check for katacontainers
Signed-off-by: Victor Morales <v.morales@samsung.com>
Co-authored-by: Pasquale Toscano <pasqualetoscano90@gmail.com>
Command line flags aren't added to kube-proxy which results in missing
feature gates set in this component. Add appropriate setting to
ConfigMap instead.
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
'ansible.vars.hostvars.HostVarsVars object' has no attribute 'kubeadm_upload_cert'
kubeadm_upload_cert will never be found as a hostvar for the first
master since the task is executed for a worker.
Fix by executing the upload task for the first master and register
the needed key. After that, workers can read hostvars for the master
Var kubeadm_etcd_refresh_cert_key removed since it no longer has
any use.
* Added option to force apiserver and respective client certificate to be regenerated without necessarily needing to bump the K8S cluster version
* Removed extra blank line
Handlers with the same name (Kubeadm | restart kubelet) leads to incorrect playbook execution. As a result, after completing the tasks, kubelet does not restart. This PR fix this behavior
After upgrading to newer Kubernetes(v1.17 at least), kubectl command
shows the following warning message:
WARNING: Kubernetes configuration file is group-readable.
This is insecure. Location: /home/foo/.kube/config
The kubeconfig was copied from {{ artifacts_dir }}/admin.conf with
kubeconfig_localhost feature. It is better to set valid file mode
at getting it on Kubespray.
When stopping at the check of "Stop if ip var does not match local ips"
the error message is like:
fatal: [single-k8s]: FAILED! => {
"assertion": "ip in ansible_all_ipv4_addresses",
"changed": false,
"evaluated_to": false,
"msg": "Assertion failed"
}
That doesn't contain actual IP addresses and it is difficult to understand
what was wrong. This adds the error message which contain actual IP addresses
to investigate the issue if happens.
* calico: add constant calico_min_version_required
and verify current deployed version against it.
* calico: remove upgrade support with data migration
The tool was used pre v3.0.0 and is no longer needed.
* calico: remove old version support from tasks
* calico: remove old ver support from policy ctrl
* calico: remove old ver support from node
* canal: remove old ver support
* remove unused calicoctl download checksums
calico_min_version_required is the oldest version that can be installed
Older versions can be removed.
* Fix reserved memory unit in kubelet configuration
Signed-off-by: Wang Zhen <lazybetrayer@gmail.com>
* Move systemReserved default values from template
Signed-off-by: Wang Zhen <lazybetrayer@gmail.com>
* remove podman cni plugin
* configure networkamanger global dns
* allow installation of python3-libselinux by disabling update repo temporary
* remove ipv4 section because it is not a valid configuration
Removes these startup warnings:
Warning: For remote container runtime, --pod-infra-container-image is ignored in kubelet, which should be set in that remote runtime instead
Using "/var/run/crio/crio.sock" as endpoint is deprecated, please consider using full url format "unix:///var/run/crio/crio.sock".
* Use proper openssl command to differentiate between host and ip in current certificate check
* fixup! Use proper openssl command to differentiate between host and ip in current certificate check
* Fix kubelet cgroup driver detection for crio
Remove fact standalone_kubelet since it is not used
* Fix yamllint complaints of roles/kubernetes/node/tasks/facts.yml
Co-authored-by: Hans Feldt <hafe@users.noreply.github.com>
* MINOR: Check kernel version before enable modprobe nf_conntrack
* CLEANUP: no more need to ignore error of this task
* MINOR: Fixing yaml and ansible lint error - remove trailling-space
If the special parameter "$@" is not quoted, the following command will not work:
./kubectl.sh patch storageclass my-storage-class -p '{"metadata": {"annotations":{"storageclass.kubernetes.io/is-default-class":"true"}}}'
* fix(kubelet): exec notify restart kubelet service when kube-config.yml changed
* Revert "refactor(kubelet handler): change task name("reload kubelet") this is misleading"
This reverts commit 8f5d29560802c7c997293adb1ce9f84d3b20b6cb.
* fix(handlers,kubelet): setting right notify task name
* etcd: etcd-events doesn't depend on etcd_cluster_setup
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: remove condition already present on include_tasks
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: fix scaling up
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: use *access_addresses, do not delegate to etcd[0]
We want to wait for the full cluster to be healthy,
so use all the cluster addresses
Also we should be able to run the playbook when etcd[0] is down
(not tested), so do not delegate to etcd[0]
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: use failed_when for health check
unhealthy cluster is expected on first run, so use failed_when
instead of ignore_errors to remove scary red messages
Also use run_once
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes/preinstall: ensure ansible_fqdn is up to date after changing /etc/hosts
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes/master: regenerate apiserver cert if needed
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes-sigs-kubespray #5824
Added support nodes which are part of Virtual Machine Scale Sets(VMSS)
* kubernetes-sigs-kubespray #5824
* kubernetes-sigs-kubespray #5824
Added comments and updatetd azure docs.
* kubernetes-sigs-kubespray #5824
Added supported values comments for "azure_vmtype" in azure.yml
The variable is defined in `kubernetes/preinstall` role and used in several roles. Since `kubernetes/preinstall` is not always included when `ansible-playbook` is run with tag selectors (see #5734 for reason), they will fail, or individual roles must copy the same fact definitions (as in #3846). Moving the definition to the always-included `kubespray-defaults` role will resolve the dependency problem.
- This solves issue #5721 & #5713 (dupes)
- Provide a cleaner default usage pattern for the download role
around etcd that supports 'host' and 'docker' properly
- Extract the 'etcdctl' as a separate task install piece and reuse it where
appropriate
- Update the kubeadm-etcd task to reflect the above change
* fedora coreos support
- bootstrap and new fact for
* fedora coreos support
- fix bootstrap condition
* fedora coreos support
- allow customize packages for fedora coreos bootstrap
* fedora coreos support
- prevent install ptyhon3 and epel via dnf for fedora coreos
* fedora coreos support
- handle all ostree like os in same way
* fedora coreos support
- handle all ostree like os in same way for crio
* fedora coreos support
- add fcos documentations
refs #5277
As the issue describes, when no external or local load-balanced is used,
kube-proxy won't be able to contact apiserver at 127.0.0.1. So the
config map should be left as is.
* download file
* download containers
* fix push image to nodes
* pull if none image on host
* fix
* improve docker image tag checks.
do not pull already cached images
* rebase fix merge conflict
* add support download_run_once when upgrade and scale cluster
add some test with download_run_once
* set default values to temp flag for every download cycle
* add save,load abilty for containerd and crio when download_run_once=true
* return redefine image save/load command to set_docker_image_facts.yml
* move set command to set_container_facts
* ctr in containerd_bin_dir
* fix order of ctr image export arguments
* temporary disable download_run_once for containerd and crio
due https://github.com/containerd/containerd/issues/4075
* remove unused files
* fix strict yaml linter warning and errors
* refactor logical conditions to pull and cache container images
* remove comment due lint check
* document role
* remove image_load_on_localhost, because cached images are always loaded to docker on remote sites
* remove XXX from debug output
* Run 'container-engine' after drain.
Move possibly disruptive role 'container-engine' to run after the node
is drained.
As that role have to be run on non-cluster nodes as well (etcd and
calico-rr), and those nodes are not drained, add play for that case.
* Check if api is up before upgrade.
If container engine is restarted in previous role, api controller can
take some time to start. This check ensures api is up before upgrade.
* Fix incorrect assertion comparison for kube_network_node_prefix
* Ignore assertion comparison for kube_network_node_prefix when using calico
* Adding more var docs description for kube_network_node_prefix
* Fixing trailing whitespaces
* External OpenStack Cloud Controller Manager implementation
* Adding controller image tag
* Minor fixes
* Restructuring the external cloud controller to work with KubeADM
* Introduce kubelet_config_extra_args and kubelet_node_config_extra_args to pass params to kubelet via YAML config
* kubelet_config_extra_args is not the alternative
When running with serial != 100%, like upgrade_cluster.yml, we need to apply this fixup each time
Problem was introduced in 05dc2b3a09
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Resolves issue where kubectl cache of <v1.16 api schema
interferes with interacting with daemonsets and deployments.
Change-Id: I63b7046958f2008eb144b6da0004c598f945e0ae
* Fix python3-libselinux installation for RHEL/CentOS 8
In bootstrap-centos.yml we haven't gathered the facts,
so #5127 couldn't work
Minimum ansible version to run kubespray is 2.7.8,
so ansible_distribution_major_version is defined an there is no need to default it
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Restart NetworkManager for RHEL/CentOS 8
network.service doesn't exist anymore
# systemctl status network
Unit network.service could not be found.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Add module_hotfixes=True to docker / containerd yum repo config
https://bugzilla.redhat.com/show_bug.cgi?id=1734081https://bugzilla.redhat.com/show_bug.cgi?id=1756473
Without this setting you end up with the following error:
# yum install docker-ce
Failed to set locale, defaulting to C
Last metadata expiration check: 0:03:21 ago on Thu Sep 26 22:00:05 2019.
Error:
Problem: package docker-ce-3:19.03.2-3.el7.x86_64 requires containerd.io >= 1.2.2-3, but none of the providers can be installed
- cannot install the best candidate for the job
- package containerd.io-1.2.2-3.3.el7.x86_64 is excluded
- package containerd.io-1.2.2-3.el7.x86_64 is excluded
- package containerd.io-1.2.4-3.1.el7.x86_64 is excluded
- package containerd.io-1.2.5-3.1.el7.x86_64 is excluded
- package containerd.io-1.2.6-3.3.el7.x86_64 is excluded
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
This fixes the scenario where masters are upgraded one at a time
and coredns gets improperly scaled back up to 2 replicas.
Change-Id: I7cc9283f40efcfd61b5813c89a5805c95d901567
Kubespray Pull Request #5084 (https://github.com/kubernetes-sigs/kubespray/pull/5084) caused more problems than it solved due to limitations with the synchronize module. See comments on Kubespray Issues #5059 (https://github.com/kubernetes-sigs/kubespray/issues/5059) and #5116 (https://github.com/kubernetes-sigs/kubespray/issues/5116). Details from Ansible documentation: "Currently, synchronize is limited to elevating permissions via passwordless sudo. This is because rsync itself is connecting to the remote machine and rsync doesn’t give us a way to pass sudo credentials in. ... Currently there are only a few connection types which support synchronize (ssh, paramiko, local, and docker) because a sync strategy has been determined for those connection types. Note that the connection for these must not need a password as rsync itself is making the connection and rsync does not provide us a way to pass a password to the connection. ..." Thus, reverting Pull Request #5084.
Omar Aloraini
Necatican Yıldırım
Ilya Margolin
Iago Santos
rtsp
Marcos Lorenzo
Victor Morales
Kenichi Omichi
Cristian Calin
Wang Zhen
Hari Hud
Samuel Liu
Daniil Muidinov
Smita Srivastava
cola-zero
spaced
Shinerrs
flix444
Kasakaze
Florian Ruynat
Pavel Martynov
MRoci
Sergey
Mathieu Parent
Etienne Champetier
emiran-orange
Maciej Wereski
Helmut Januschka
Anthony Rabbito
Lennart Jern
Du9L.com
yydzhou
Emil
FedericoHeichou
Matt Calvert
Ryler Hockenbury
Etienne Champetier
Rick Haan
Cristian Klein
holmesb
Dmitry Chusovitin
Sylvain Desbureaux
Hans Feldt
Alexander D. Kanevskiy
Bas van den Brink
David Medinets
Michal Skalski
Victor Morales
Maciej
Bogdan Peste
Nikita Velgin
petruha
Lennart Weller
orange-llajeanne
Lovro Seder
Maxime Guyot
Barry Melbourne
Sulochan Acharya
jeanfabrice
Florian Ruynat
Michal Petko
Arthur Outhenin-Chalandre
Erwan Miran
Florent Monbillard
Konstantin Lebedev
fulii
Kuralamudhan Ramakrishnan
Igor Vuk
Joel Seguillon
bozzo
Mike Dziedziela
mohsen
Y0UZ45
Unai Arríen
404notfoundhard
Mateus Caruccio
Matthew Mosesohn
Vinayaka V Ladwa
Stephen Schmidt
Qingkun Li
Kubernetes Prow Robot
Javeria Khan
Adrien Gooris
Ali Sanhaji
Sylvain Chateau
aca
Damon Wang
Hugo Blom
Yujun Zhang
Michael Shen
LuciferInLove
Michael Oglesby
yelhouti
Matthew Rapa
YichenWong