* Mask systemd swap.target do disable swap
This is a more generic way to disable swap, since it pulls .swap units
in systemd distributions; fstab is only one way to generate .swap units.
* Unconditionally disable swap
We only care to disable it (the "swapon" registered variable is not used
anywhere else.
This allows to get rid of the ignore_errors, since this was added
because swapon.stdout does not exist in check_mode (see issue #6642).
* Don't explicitly disable swapOnZram
We're already masking the swap.target, which would pull the zram unit,
hence no need to handle zram-generator specifically.
* Try both conntrack modules instead of checking kernel version
Depending on kernel distributor, the kernel version might not be a
correct indicator of the conntrack module use.
Instead, we check both (and use the first found).
* Use modproble.persistent rather than manual persistence
* Validate systemd unit files
This ensure that we fail early if we have a bad systemd unit file
(syntax error, using a version not available in the local version, etc)
* Hack to check systemd version for service files validation
factory-reset.target was introduced in system 250, same version as the
aliasing feature we need for verifying systemd services with ansible.
So we only actually executes the validation if that target is present.
This is an horrible hack which should be reverted as soon as we drop
support for distributions with systemd<250.
* Use RandomizedDelaySec to spread out control certificates renewal plane
If the number of control plane node is superior to 6, using (index * 10
minutes) will fail (03:60:00 is not a valid timestamp).
Compared to just fixing the jinja expression (to use a modulo for
example), this should avoid having two control planes certificates
update node being triggered at the same time.
* Make k8s-certs-renew.timer Persistent
If the control plane happens to be offline during the scheduled
certificates renewal (node failure or anything like that), we still want
the renewal to happen.
* containerd: refactor handlers to use 'listen'
* cri-dockerd: refactor handlers to use 'listen'
* cri-o: refactor handlers to use 'listen'
* docker: refactor handlers to use 'listen'
* etcd: refactor handlers to use 'listen'
* control-plane: refactor handlers to use 'listen'
* kubeadm: refactor handlers to use 'listen'
* node: refactor handlers to use 'listen'
* preinstall: refactor handlers to use 'listen'
* calico: refactor handlers to use 'listen'
* kube-router: refactor handlers to use 'listen'
* macvlan: refactor handlers to use 'listen'
It was not 'false', which made some tasks (e.g. using systemd-resolved
template) to effectively remove default search domains; caused DNS loop
after rebooting the node/restarting cluster, so localdns service didn't
run correctly.
* Migrate node-role.kubernetes.io/master to node-role.kubernetes.io/control-plane
* Migrate node-role.kubernetes.io/master to node-role.kubernetes.io/control-plane
* Migrate node-role.kubernetes.io/master to node-role.kubernetes.io/control-plane
when people run playbook with option `--tags=kubelet`, the kubelet config may changed, because some variables used in task populating `kubelet-config.yml` could be different with running task(`Fetch facts`)
* tests: replace fedora35 with fedora37
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* tests: replace fedora36 with fedora38
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* docs: update fedora version in docs
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* molecule: upgrade fedora version
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* tests: upgrade fedora images for vagrant and kubevirt
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* vagrant: workaround to fix private network ip address in fedora
Fedora stop supporting syconfig network script so we added a workaround
here
https://github.com/hashicorp/vagrant/issues/12762#issuecomment-1535957837
to fix it.
* netowrkmanager: do not configure dns if using systemd-resolved
We should not configure dns if we point to systemd-resolved.
Systemd-resolved is using NetworkManager to infer the upstream DNS
server so if we set NetworkManager to 127.0.0.53 it will prevent
systemd-resolved to get the correct network DNS server.
Thus if we are in this case we just don't set this setting.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* image-builder: update centos7 image
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* gitlab-ci: mark fedora packet jobs as allow failure
Fedora networking is still broken on Packet, let's mark it as allow
failure for now.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix ansible-lint name
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: ignore jinja template error in names
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: capitalize ansible name
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: update notify after name capitalization
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix var-spacing ansible rule
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix spacing on the beginning/end of jinja template
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix spacing of default filter
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix spacing between filter arguments
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix double space at beginning/end of jinja
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix remaining jinja[spacing] ansible-lint warning
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: update all dependencies including ansible
Upgrade to ansible 7.x and ansible-core 2.14.x. There seems to be issue
with ansible 8/ansible-core 2.15 so we remain on those versions for now.
It's quite a big bump already anyway.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* tests: install aws galaxy collection
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* ansible-lint: disable various rules after ansible upgrade
Temporarily disable a bunch of linting action following ansible upgrade.
Those should be taken care of separately.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve deprecated-module ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve no-free-form ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve schema[meta] ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve schema[playbook] ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve schema[tasks] ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve risky-file-permissions ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve risky-shell-pipe ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: remove deprecated warn args
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: use fqcn for non builtin tasks
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve syntax-check[missing-file] for contrib playbook
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: use arithmetic inside jinja to fix ansible 6 upgrade
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* Fix `The task includes an option with an undefined variable` for 1.27
* delete old flag --container-runtime
Signed-off-by: Victor Login <batazor@evrone.com>
---------
Signed-off-by: Victor Login <batazor@evrone.com>
According to the canal github[1] the repo is not maintained over 5 years.
In addition, the README says
```
Originally, we thought we might more deeply integrate the two projects
(possibly even going as far as a rebranding!). However, over time it
became clear that that wasn't really necessary to fulfil our goal of
making them work well together. Ultimately, we decided to focus on
adding features to both projects rather than doing work just to
combine them.
```
So it is difficult to support canal by Kubespray at this situation.
[1]: https://github.com/projectcalico/canal
Max Gautier
Samuel Liu
AbhishekKr
Samuel Mutel
borgiacis
Hedayat Vatankhah (هدایت)
yun
Louis Tu
Unai Arríen
Ugur Can Ozturk
Mohamed Omar Zaian
Jason Witkowski
Qasim Mehmood
NierYYDS
Kay Yan
蔣 航
tenni
R. P. Taylor
Arthur Outhenin-Chalandre
Francisco Orselli
satandyh
Tiago Epifânio
peterw
ERIK
Pat Riehecky
Victor Login
Andrei Costescu
Kenichi Omichi
Mikhail Gorozhin
Manuelraa