49dff97d9c
Relabel controler-manager to kube-controller-manager ( #1830 )
...
Fixes #1129
2017-10-18 17:29:18 +01:00
16462292e1
Properly skip extra SANs when not specified for kubeadm ( #1831 )
2017-10-18 12:04:13 +01:00
356515222a
Add possibility to insert more ip adresses in certificates ( #1678 )
...
* Add possibility to insert more ip adresses in certificates
* Add newline at end of files
* Move supp ip parameters to k8s-cluster group file
* Add supplementary addresses in kubeadm master role
* Improve openssl indexes
2017-10-17 11:06:07 +01:00
d487b2f927
Security best practice fixes ( #1783 )
...
* Disable basic and token auth by default
* Add recommended security params
* allow basic auth to fail in tests
* Enable TLS authentication for kubelet
2017-10-15 20:41:17 +01:00
7e4668859b
Change file used to check kubeadm upgrade method ( #1784 )
...
* Change file used to check kubeadm upgrade method
Test for ca.crt instead of admin.conf because admin.conf
is created during normal deployment.
* more fixes for upgrade
2017-10-15 10:33:22 +01:00
ef47a73382
Add new addon Istio ( #1744 )
...
* add istio addon
* add addons to a ci job
2017-10-13 15:42:54 +01:00
ee83e874a8
Clear admin kubeconfig when rotating certs ( #1772 )
...
* Clear admin kubeconfig when rotating certs
* Update main.yml
2017-10-12 09:55:46 +01:00
f14f04c5ea
Upgrade to kubernetes v1.8.0 ( #1730 )
...
* Upgrade to kubernetes v1.8.0
hyperkube no longer contains rsync, so now use cp
* Enable node authorization mode
* change kube-proxy cert group name
2017-10-05 10:51:21 +01:00
9c86da1403
Normalize tags in all places to prepare for tag fixing in future ( #1739 )
2017-10-05 08:43:04 +01:00
a56738324a
Move set_facts to kubespray-defaults defaults
...
These facts can be generated in defaults with a performance
boost.
Also cleaned up duplicate etcd var names.
2017-10-04 14:02:47 +01:00
e42cb43ca5
add bootstrap for debian ( #1726 )
2017-10-03 08:30:45 +01:00
8e1210f96e
Fix cluster-network w/ prefix > 25 not possible with CNI ( #1713 )
2017-10-01 10:43:00 +01:00
3ff5f40bdb
fix graceful upgrade ( #1704 )
...
Fix system namespace creation
Only rotate tokens when necessary
2017-09-27 14:49:20 +01:00
689ded0413
Enable kubeadm upgrades to any version ( #1709 )
2017-09-27 14:48:18 +01:00
327ed157ef
Verify valid settings before deploy ( #1705 )
...
Also fix yaml lint issues
Fixes #1703
2017-09-27 14:47:47 +01:00
477afa8711
when and run_once are reduplicative ( #1694 )
2017-09-26 14:48:05 +01:00
bd272e0b3c
Upgrade to kubeadm ( #1667 )
...
* Enable upgrade to kubeadm
* fix kubedns upgrade
* try upgrade route
* use init/upgrade strategy for kubeadm and ignore kubedns svc
* Use bin_dir for kubeadm
* delete more secrets
* fix waiting for terminating pods
* Manually enforce kube-proxy for kubeadm deploy
* remove proxy. update to kubeadm 1.8.0rc1
2017-09-26 10:38:58 +01:00
a1cde03b20
Correct master manifest cleanup logic ( #1693 )
...
Fixes #1666
2017-09-25 12:19:04 +01:00
188bae142b
Fix wait for hosts in CI ( #1679 )
...
Also fix usage of failed_when and handling exit code.
2017-09-20 14:30:09 +01:00
8e731337ba
Enable HA deploy of kubeadm ( #1658 )
...
* Enable HA deploy of kubeadm
* raise delay to 60s for starting gce hosts
2017-09-15 22:28:15 +01:00
b294db5aed
fix apply for netchecker upgrade ( #1659 )
...
* fix apply for netchecker upgrade and graceful upgrade
* Speed up daemonset upgrades. Make check wait for ds upgrades.
2017-09-15 13:19:37 +01:00
6744726089
kubeadm support ( #1631 )
...
* kubeadm support
* move k8s master to a subtask
* disable k8s secrets when using kubeadm
* fix etcd cert serial var
* move simple auth users to master role
* make a kubeadm-specific env file for kubelet
* add non-ha CI job
* change ci boolean vars to json format
* fixup
* Update create-gce.yml
* Update create-gce.yml
* Update create-gce.yml
2017-09-13 19:00:51 +01:00
75b13caf0b
Fix kube-apiserver status checks when changing insecure bind addr ( #1633 )
2017-09-09 23:41:48 +03:00
5d99fa0940
Purge old upgrade hooks and unused tasks ( #1641 )
2017-09-09 23:41:20 +03:00
8ae77e955e
Adding in certificate serial numbers to manifests ( #1392 )
2017-09-01 09:02:23 +03:00
7a98ad50b4
Fixing CA certificate locations for k8s components
2017-08-30 15:30:40 -05:00
a39e78d42d
Initial version of Flannel using CNI ( #1486 )
...
* Updates Controller Manager/Kubelet with Flannel's required configuration for CNI
* Removes old Flannel installation
* Install CNI enabled Flannel DaemonSet/ConfigMap/CNI bins and config (with portmap plugin) on host
* Uses RBAC if enabled
* Fixed an issue that could occur if br_netfilter is not a module and net.bridge.bridge-nf-call-iptables sysctl was not set
2017-08-25 10:07:50 +03:00
01ce09f343
Add feature_gates var for customizing Kubernetes feature gates ( #1520 )
2017-08-24 23:18:38 +03:00
8b151d12b9
Adding yamllinter to ci steps ( #1556 )
...
* Adding yaml linter to ci check
* Minor linting fixes from yamllint
* Changing CI to install python pkgs from requirements.txt
- adding in a secondary requirements.txt for tests
- moving yamllint to tests requirements
2017-08-24 12:09:52 +03:00
3c710219a1
Fix Some Typos in kubernetes master role ( #1547 )
...
* Fix Typo etc3 -> etcd3
* Fix typo in post-upgrade of master. stop -> start
2017-08-20 13:54:28 +03:00
383d582b47
Merge pull request #1382 from jwfang/rbac
...
basic rbac support
2017-08-07 08:01:51 -05:00
e0960f6288
FIX: Unneded (extra) cycles in some tasks ( #1393 )
2017-07-27 20:46:21 +03:00
092bf07cbf
basic rbac support
2017-07-17 19:29:59 +08:00
266ca9318d
Use the kube_apiserver_insecure_port variable instead of static 8080
2017-06-12 09:20:59 +02:00
8203383c03
rename almost all mentions of kargo
2017-06-16 13:25:46 -04:00
01c0ab4f06
check if cloud_provider is defined
2017-05-31 08:24:24 -04:00
7e2aafcc76
add direct path for cert in AWS with RHEL family
2017-05-26 17:32:50 -04:00
2d6bc9536c
Merge pull request #1246 from holser/disable_dns_for_kube_services
...
Change DNS policy for kubernetes components
2017-04-20 16:12:52 +03:00
d8aa2d0a9e
Change DNS policy for kubernetes components
...
According to code apiserver, scheduler, controller-manager, proxy don't
use resolution of objects they created. It's not harmful to change
policy to have external resolver.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-04-20 11:22:57 +02:00
d68cfeed6e
Move namespace file to template directory
2017-04-19 13:37:02 +02:00
c3c9e955e5
Merge pull request #1232 from rsmitty/custom-flags
...
add ability for custom flags
2017-04-17 14:01:32 -04:00
72d5db92a8
remove stray spaces in templating
2017-04-17 12:24:24 -04:00
3f302c8d47
ensure spacing on string of flags
2017-04-17 12:13:39 -04:00
f9d4a1c1d8
update to safeguard against accidentally passing string instead of list
2017-04-17 11:09:34 -04:00
49be805001
allow admission control plug-ins to be easily customized
2017-04-16 22:03:45 -04:00
94596388f7
add ability for custom flags
2017-04-14 17:33:04 -04:00
2670eefcd4
Refactoring resolv.conf
...
- Renaming templates for netchecker
- Add dnsPolicy: ClusterFirstWithHostNet to kube-proxy
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-04-05 09:28:01 +02:00
f8cf6b4f7c
Merge pull request #1186 from holser/resolv_conf
...
Set ClusterFirstWithHostNet for Pods with hostnetwork: true
2017-04-04 20:49:55 +03:00
1cfe0beac0
Set ClusterFirstWithHostNet for Pods with hostnetwork: true
...
In kubernetes 1.6 ClusterFirstWithHostNet was added as an option. In
accordance to it kubelet will generate resolv.conf based on own
resolv.conf. However, this doesn't create 'options', thus the proper
solution requires some investigation.
This patch sets the same resolv.conf for kubelet as host
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-04-04 16:34:13 +02:00
80828a7c77
use etcd2 when upgrading unless forced
2017-04-03 15:07:42 +03:00
Jan Jungnickel
Matthew Mosesohn
Rémi de Passmoilesel
Aivars Sterns
Matthew Mosesohn
Julian Poschmann
tanshanshan
Brad Beam
Brad Beam
Chad Swenson
Hassan Zamani
Miad Abrin
Anton
jwfang
Gregory Storme
Spencer Smith
Sergii Golovatiuk
Hans Kristian Flaatten
Spencer Smith
gbolo