Commit Graph

384 Commits (82b247d1a483f9f2208734244701363e90abaad7)

Author SHA1 Message Date
Matthew Mosesohn a21eb036ee Add no_log to cert tar tasks
This works around 4MB limit for gitlab CI runner.
2017-02-18 14:09:57 +04:00
Antoine Legrand 3629b9051d Merge pull request #1038 from rutsky/kubelet-mount-var-log
Mount host's /var/log into kubelet container
2017-02-17 10:26:12 +01:00
Vladimir Rutsky bff955ff7e Mount host's /var/log into kubelet container
Kubelet is responsible for creating symlinks from /var/lib/docker to /var/log
to make fluentd logging collector work.
However without using host's /var/log those links are invisible to fluentd.

This is done on rkt configuration too.
2017-02-16 22:31:05 +03:00
Matthew Mosesohn 80c0e747a7 Fix references to CoreOS and Container Linux by CoreOS
Fixes #967
2017-02-16 19:25:17 +03:00
Matthew Mosesohn d92d955aeb Merge pull request #985 from rutsky/check-mode-for-shell-commands
set "check_mode: on" for read-only "shell" steps that registers result
2017-02-15 17:53:41 +03:00
Brad Beam 4c891b8bb0 Adding support for proxy w/ rkt kubelet 2017-02-14 08:09:49 -06:00
Matthew Mosesohn b7258ec3bb Merge pull request #1013 from mattymo/remove_masqerade_all
Disable kube_proxy_masquerade_all
2017-02-14 14:00:29 +03:00
Matthew Mosesohn f5e27f1a21 Merge pull request #1021 from holser/remove_deprecated
Replace always_run with check_mode
2017-02-14 11:25:58 +03:00
Vladimir Rutsky 09847567ae set "check_mode: no" for read-only "shell" steps that registers result
"shell" step doesn't support check mode, which currently leads to failures,
when Ansible is being run in check mode (because Ansible doesn't run command,
assuming that command might have effect, and no "rc" or "output" is registered).

Setting "check_mode: no" allows to run those "shell" commands in check mode
(which is safe, because those shell commands doesn't have side effects).
2017-02-13 18:53:41 +03:00
Sergii Golovatiuk 5f4cc3e1de Replace always_run with check_mode
always_run was deprecated in Ansible 2.2 and will be removed in 2.4
ansible logs contain "[DEPRECATION WARNING]: always_run is deprecated.
Use check_mode = no instead". This patch fix deprecation.
2017-02-13 15:00:56 +01:00
Sergii Golovatiuk aeadaa1184 Set ssl_ca_dirs for rkt based on fact
Since systemd kubelet.service has {{ ssl_ca_dirs }}, fact should be
gathered before writing kubelet.service.

Closes: #1007
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-13 13:28:29 +01:00
Matthew Mosesohn 2c532cb74d Disable kube_proxy_masquerade_all
Fixes #1012
2017-02-10 13:16:39 +03:00
Bogdan Dobrelya 89ae9f1f88 Merge pull request #1002 from code0x9/master
use ansible sysctl module for config ip forwarding
2017-02-10 10:40:18 +01:00
Matthew Mosesohn 2f88c9eefe Merge pull request #989 from holser/kubelet_remedy
Kubernetes Reliability Improvements
2017-02-10 09:29:29 +03:00
Sergii Golovatiuk c07d60bc90 Kubernetes Reliability Improvements
- Exclude kubelet CPU/RAM (kube-reserved) from cgroup. It decreases a
  chance of overcommitment
- Add a possibility to modify Kubelet node-status-update-frequency
- Add a posibility to configure node-monitor-grace-period,
  node-monitor-period, pod-eviction-timeout for Kubernetes controller
  manager
- Add Kubernetes Relaibility Documentation with recomendations for
  various scenarios.

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-09 23:54:08 +01:00
Greg Althaus 3f0c13af8a Make kubelet_load_modules always present but false.
Update code and docs for that assumption.
2017-02-09 10:25:44 -06:00
Greg Althaus fcd78eb1f7 Due to the nsenter and other reworks, it appears that
kubelet lost the ability to load kernel modules.  This
puts that back by adding the lib/modules mount to kubelet.

The new variable kubelet_load_modules can be set to true
to enable this item.  It is OFF by default.
2017-02-09 10:02:26 -06:00
Mark Lee e414c25fd7 follow sysctl.conf file symlink if linked 2017-02-09 18:16:52 +09:00
Mark Lee 34a71554ae use ansible sysctl module for config ip forwarding 2017-02-09 17:28:44 +09:00
Josh Conant 245e05ce61 Vault security hardening and role isolation 2017-02-08 21:41:36 +00:00
Matthew Mosesohn 0180ad7f38 Merge pull request #990 from mattymo/fix_cert_upgrade
Fix check for node-NODEID certs existence
2017-02-08 14:44:09 +03:00
Matthew Mosesohn d587270293 Merge pull request #992 from vwfs/host_mount_dev
Host mount /dev for kubelet
2017-02-08 13:45:22 +03:00
Bogdan Dobrelya c2bd76a22e Merge pull request #956 from adidenko/update-netchecker
Update playbooks to support new netchecker
2017-02-08 10:09:46 +01:00
Alexander Block 010fe30b53 Host mount /dev for kubelet 2017-02-08 09:55:51 +01:00
Matthew Mosesohn e5779ab786 Fix check for node-NODEID certs existence
Fixes upgrade from pre-individual node cert envs.
2017-02-07 21:06:48 +03:00
Aleksandr Didenko 54af533b31 Update playbooks to support new netchecker
Netchecker is rewritten in Go lang with some new args instead of
env variables. Also netchecker-server no longer requires kubectl
container. Updating playbooks accordingly.
2017-02-07 15:20:34 +01:00
Matthew Mosesohn f3a0f73588 Prevent dynamic port allocation in nodePort range
kube_apiserver_node_port_range should be accessible only
to kube-proxy and not be taken by a dynamic port allocation.

Potentially temporary if https://github.com/kubernetes/kubernetes/issues/40920
gets fixed.
2017-02-06 20:01:16 +03:00
Matthew Mosesohn fd30131dc2 Revert "Drop linux capabilities and rework users/groups" 2017-02-06 15:58:54 +03:00
Bogdan Dobrelya cae2982d81 Merge pull request #911 from bogdando/DROP_CAPS
Drop linux capabilities and rework users/groups
2017-02-06 12:05:51 +01:00
Bogdan Dobrelya 5a7a3f6d4a Merge pull request #949 from vmtyler/master
Fixes Support for OpenStack v3 credentials
2017-02-03 12:22:00 +01:00
Matthew Mosesohn 10f924a617 Merge pull request #927 from holser/nsenter_fix
Remove nsenter workaround
2017-02-02 18:18:15 +03:00
Sergii Golovatiuk 585afef945 Remove nsenter workaround
- Docker 1.12 and further don't need nsenter hack. This patch removes
  it.  Also, it bumps the minimal version to 1.12.

Closes #776

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-02 14:38:11 +01:00
Greg Althaus 923057c1a8 This continues the DHCP hook checks. Also protect the create side
if the system doesn't have any config files at all.
2017-01-31 09:56:27 -06:00
Matthew Mosesohn 08822ec684 Fix cert distribution at scale
Use stdin instead of bash args to pass node filenames and base64 data.
Use tempfile for master cert data
2017-01-31 16:27:45 +03:00
Tyler Britten f8ffa1601d Fixed for non-null output 2017-01-27 10:47:59 -05:00
Tyler Britten da01bc1fbb Updated OpenStack vars to check for tenant_id (v2) and project_id (v3) 2017-01-27 10:26:20 -05:00
Xavier Lange e5fdc63bdd Bugfix: skip cloud_config on etcd 2017-01-25 14:09:21 -08:00
Bogdan Dobrelya cb2e5ac776 Drop linux capabilities and rework users/groups
* Drop linux capabilities for unprivileged containerized
  worlkoads Kargo configures for deployments.
* Configure required securityContext/user/group/groups for kube
  components' static manifests, etcd, calico-rr and k8s apps,
  like dnsmasq daemonset.
* Rework cloud-init (etcd) users creation for CoreOS.
* Fix nologin paths, adjust defaults for addusers role and ensure
  supplementary groups membership added for users.
* Add netplug user for network plugins (yet unused by privileged
  networking containers though).
* Grant the kube and netplug users read access for etcd certs via
  the etcd certs group.
* Grant group read access to kube certs via the kube cert group.
* Remove priveleged mode for calico-rr and run it under its uid/gid
  and supplementary etcd_cert group.
* Adjust docs.
* Align cpu/memory limits and dropped caps with added rkt support
  for control plane.

Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-20 08:50:42 +01:00
Matthew Mosesohn 8ce32eb3e1 Merge pull request #905 from galthaus/async-runs
Add tasks to ensure that the first nodes have their directories for cert gen
2017-01-19 18:32:27 +03:00
Matthew Mosesohn aae0314bda Merge pull request #904 from galthaus/nginx-port-config
Add nginx local balancer port configuration variable
2017-01-19 18:31:57 +03:00
Greg Althaus 0d44599a63 Add explicit name printing in task names for deletgated task during
cert creation
2017-01-18 14:06:50 -06:00
Matthew Mosesohn b6c3e61603 Fix setting resolvconf when using rkt deploy mode
rkt deploy mode doesn't create {{ bin_dir }}/kubelet, so
let's rely on kubelet.env file instad.
2017-01-18 19:18:47 +03:00
Matthew Mosesohn b2a27ed089 Fix bash completion installation 2017-01-17 20:36:58 +03:00
Greg Althaus 6905edbeb6 Add a variable that defaults to kube_apiserver_port that defines
the which port the local nginx proxy should listen on for HA
local balancer configurations.
2017-01-14 23:38:07 -06:00
Greg Althaus 6c69da1573 This PR adds/or modifies a few tasks to allow for the playbook to
be run by limit on each node without regard for order.

The changes make sure that all of the directories needed to do
certificate management are on the master[0] or etcd[0] node regardless
of when the playbook gets run on each node.  This allows for separate
ansible playbook runs in parallel that don't have to be synchronized.
2017-01-14 23:24:34 -06:00
Greg Althaus 95bf380d07 If the inventory name of the host exceeds 63 characters,
the openssl tools will fail to create signing requests because
the CN is too long.  This is mainly a problem when FQDNs are used
in the inventory file.

THis will truncate the hostname for the CN field only at the
first dot.  This should handle the issue for most cases.
2017-01-13 10:02:23 -06:00
Matthew Mosesohn 80703010bd Use only one certificate for all apiservers
https://github.com/kubernetes/kubernetes/issues/25063
2017-01-13 14:03:20 +03:00
Bogdan Dobrelya e88c10670e Merge pull request #891 from galthaus/selinux-order
preinstall fails on AWS CentOS7 image
2017-01-13 11:51:18 +01:00
Alexander Block 1054f37765 Don't try to delete kargo specific config from dhclient when file does not exist
Also remove the check for != "RedHat" when removing the dhclient hook,
as this had also to be done on other distros. Instead, check if the
dhclienthookfile is defined.
2017-01-13 10:56:10 +01:00
Greg Althaus f77257cf79 When running on CentOS7 image in AWS with selinux on, the order of
the tasks fail because selinux prevents ip-forwarding setting.

Moving the tasks around addresses two issues.  Makes sure that
the correct python tools are in place before adjusting of selinux
and makes sure that ipforwarding is toggled after selinux adjustments.
2017-01-12 10:12:21 -06:00