* Use K8s 1.15
* Use Kubernetes 1.15 and use kubeadm.k8s.io/v1beta2 for
InitConfiguration.
* bump to v1.15.0
* Remove k8s 1.13 checksums.
* Update README kubernetes version 1.15.0.
* Update metrics server 0.3.3 for k8s 1.15
* Remove less than k8s 1.14 related code
* Use kubeadm with --upload-certs instead of --experimental-upload-certs due to depricate
* Update dnsautoscaler 1.6.0
* Skip certificateKey if it's not defined
* Add kubeadm-conftolplane.v2beta2 for k8s 1.15 or later
* Support kubeadm control plane for k8s 1.15
* Update sonobuoy version 0.15.0 for k8s 1.15
* Add limited containerd support
Containerd support for Ubuntu + Calico
* Added CRI-O support for ubuntu
* containerd support.
* Reset containerd support.
* fix lint.
* implemented feedback
* Change task name cri xx instead of cri-o in reset task and timeout condition.
* set crictl to fixed version
* Use docker-ce's container.io package for containerd.
* Add check containerd is installable or not.
* Avoid stop docker when use containerd and optimize retry for reset.
* Add config.toml.
* Fixed containerd for kubelet.env.
* Merge PR #4629
* Remove unused ubuntu variable for containerd
* Polish code for containerd and cri-o
* Refactoring cri socket configuration.
* Configurable conmon.
* Remove unused crictl/runc download
* Now crictl and runc is downloaded by common crictl.yml.
* fixed yamllint error
* Fixed brokenfiles by conflict.
* Remove commented line in config.toml
* Remove readded v1.12.x version
* Fixed broken set_docker_image_facts
* Fix yamllint errors.
* Remove unused apt source
* Fix crictl could not be installed
* Add containerd config from skolekonov's PR #4601
* Use K8s 1.14 and add kubeadm experimental control plane mode
This reverts commit d39c273d96.
* Cleanup kubeadm setup run on first master
* pin kubeadm_certificate_key in test
* Remove kubelet autolabel of kube-node, add symlink for pki dir
Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
Fix issue where `kubeadm join` could wait forever for joining.
Fix issue where `kubeadm join` were not reaching the user, making
impossible to find the cause of the failure.
New behaviour is to first attempt to join without bypassing the
verifications checks and to display them if needed.
If this fails it still attempts to join by ignoring the check in
order to make previous behavior.
A timeout of 60 seconds is allocated for a joining.
Related-bug: #3973
I know this is a bit hack.
If you use cloud LB, you can use kubeadm's controlPlaneEndpoint to configure kube-proxy's server field.
But for nginx-proxy, it didn't start when kubeadm init.
- Creates and defaults an ansible variable for every configuration option in the `kubeproxy.config.k8s.io/v1alpha1` type spec
- Fixes vars that were orphaned by removing non-kubeadm
- Fixes previously harcoded kubeadm values
- Introduces a `main` directory for role default files per component (requires ansible 2.6.0+)
- Split out just `kube-proxy.yml` in this first effort
- Removes the kube-proxy server field patch task
We should continue to pull out other components from `main.yml` into their own defaults files as I did here for `defaults/main/kube-proxy.yml`. I hope for and will need others to join me in this refactoring across the project until each component config template has a matching role defaults file, with shared defaults in `kubespray-defaults` or `downloads`
* controlPlaneEndpoint set up through load balancer should be possible even in single master setups
Enable load balancer for single-master setups
Fixes an issue where single-master setups are not reachable using the usual admin.conf from outside the cluster.
controlPlaneEndpoint set up through load balancer should be possible even in single master setups
* add fix to other api versions
* remove obsolete check completely
* remove check, pass 2
* removes checks in client configuration
* delete 'and'
* Upgrade kubernetes to v1.13.0
* Remove all precense of scheduler.alpha.kubernetes.io/critical-pod in templates
* Fix cert dir
* Use kubespray v2.8 as baseline for gitlab
* Remove non-kubeadm deployment
* More cleanup
* More cleanup
* More cleanup
* More cleanup
* Fix gitlab
* Try stop gce first before absent to make the delete process work
* More cleanup
* Fix bug with checking if kubeadm has already run
* Fix bug with checking if kubeadm has already run
* More fixes
* Fix test
* fix
* Fix gitlab checkout untill kubespray 2.8 is on quay
* Fixed
* Add upgrade path from non-kubeadm to kubeadm. Revert ssl path
* Readd secret checking
* Do gitlab checks from v2.7.0 test upgrade path to 2.8.0
* fix typo
* Fix CI jobs to kubeadm again. Fix broken hyperkube path
* Fix gitlab
* Fix rotate tokens
* More fixes
* More fixes
* Fix tokens
* failed
* version_compare
* succeeded
* skipped
* success
* version_compare becomes version since ansible 2.5
* ansible minimal version updated in doc and spec
* last version_compare
* [jjo] add kube-router support
Fixescloudnativelabs/kube-router#147.
* add kube-router as another network_plugin choice
* support most used kube-router flags via
`kube_router_foo` vars as other plugins
* implement replacing kube-proxy (--run-service-proxy=true) via
`kube_proxy_mode: none`, verified in a _non kubeadm_enabled_
install, should also work for recent kubeadm releases via
`skipKubeProxyInstall: true` config
* [jjo] address PR#3339 review from @woopstar
* add busybox image used by kube-router to downloads
* fix busybox download groups key
* rework kubeadm_enabled + kube_router_run_service_proxy
- verify it working ok w/the kubeadm_enabled and
kube_router_run_service_proxy true or false
- introduce `kube_proxy_remove` fact, to decouple logic
from kube_proxy_mode (which affects kubeadm configmap
settings, thus no-good to ab-use it to 'none')
* improve kube-router.md re: kubeadm_enabled and kube_router_run_service_proxy
* address @woopstar latest review
* add inventory/sample/group_vars/k8s-cluster/k8s-net-kube-router.yml
* fix kube_router_run_service_proxy conditional for kube-proxy removal
* fix kube_proxy_remove fact (w/ |bool), add some needed kube-proxy tags on my and existing changes
* update kube-router tolerations for 1.12 compatibility
* add PriorityClass to kube-router DaemonSet
* calico upgrade to v3
* update calico_rr version
* add missing file
* change contents of main.yml as it was left old version
* enable network policy by default
* remove unneeded task
* Fix kubelet calico settings
* fix when statement
* switch back to node-kubeconfig.yaml
Upgrade Kubernetes to V1.11.2
The kubeadm configuration file version has been upgraded from v1alpha1 to v1alpha2
Add bootstrap kubeadm-config.yaml with external etcd
Matthew Mosesohn
okamototk
Erwan Miran
Maxime Guyot
Vitaliy Dmitriev
Andreas Krüger
Alex Barcelo
MarkusTeufelberger
Vedran Bartonicek
Seungkyu Ahn
Rong Zhang
Sorin Sbarnea
Chad Swenson
wangxf
Zefool
JuanJo Ciarlante
mlushpenko
Aivars Sterns
Andreas Krüger
Luis Nuñez