We take advantage of group_by to create the list of nodes needing new
certs, instead of manually looping inside a Jinja template.
This should make the role more readable and less susceptible to
white space problems.
* Validate systemd unit files
This ensure that we fail early if we have a bad systemd unit file
(syntax error, using a version not available in the local version, etc)
* Hack to check systemd version for service files validation
factory-reset.target was introduced in system 250, same version as the
aliasing feature we need for verifying systemd services with ansible.
So we only actually executes the validation if that target is present.
This is an horrible hack which should be reverted as soon as we drop
support for distributions with systemd<250.
This allows this task to work with a forks count > 10 and the default
configuration of sshd, which is to limit sessions to 10. (see
MaxSessions in sshd_config).
Since this is a delegate_to task, it connects to the same host (first
etcd) for each node in the cluster, thus easily going above 10.
Raising the ssh connection attempts allow for more robustness, without
decreasing the forks count or serialising the tasks, which could slow
the task (or the playbook as a whole, if decreasing forks).
* project: fix ansible-lint name
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: ignore jinja template error in names
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: capitalize ansible name
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: update notify after name capitalization
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix var-spacing ansible rule
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix spacing on the beginning/end of jinja template
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix spacing of default filter
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix spacing between filter arguments
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix double space at beginning/end of jinja
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: fix remaining jinja[spacing] ansible-lint warning
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: update all dependencies including ansible
Upgrade to ansible 7.x and ansible-core 2.14.x. There seems to be issue
with ansible 8/ansible-core 2.15 so we remain on those versions for now.
It's quite a big bump already anyway.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* tests: install aws galaxy collection
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* ansible-lint: disable various rules after ansible upgrade
Temporarily disable a bunch of linting action following ansible upgrade.
Those should be taken care of separately.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve deprecated-module ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve no-free-form ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve schema[meta] ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve schema[playbook] ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve schema[tasks] ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve risky-file-permissions ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve risky-shell-pipe ansible-lint error
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: remove deprecated warn args
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: use fqcn for non builtin tasks
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: resolve syntax-check[missing-file] for contrib playbook
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
* project: use arithmetic inside jinja to fix ansible 6 upgrade
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
---------
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
According to the canal github[1] the repo is not maintained over 5 years.
In addition, the README says
```
Originally, we thought we might more deeply integrate the two projects
(possibly even going as far as a rebranding!). However, over time it
became clear that that wasn't really necessary to fulfil our goal of
making them work well together. Ultimately, we decided to focus on
adding features to both projects rather than doing work just to
combine them.
```
So it is difficult to support canal by Kubespray at this situation.
[1]: https://github.com/projectcalico/canal
* feat: make kubernetes owner parametrized
* docs: update hardening guide with configuration for CIS 1.1.19
* fix: set etcd data directory permissions to be compliant to CIS 1.1.12
* Ansible: move to Ansible 3.4.0 which uses ansible-base 2.10.10
* Docs: add a note about ansible upgrade post 2.9.x
* CI: ensure ansible is removed before ansible 3.x is installed to avoid pip failures
* Ansible: use newer ansible-lint
* Fix ansible-lint 5.0.11 found issues
* syntax issues
* risky-file-permissions
* var-naming
* role-name
* molecule tests
* Mitogen: use 0.3.0rc1 which adds support for ansible 2.10+
* Pin ansible-base to 2.10.11 to get package fix on RHEL8
* rename ansible groups to use _ instead of -
k8s-cluster -> k8s_cluster
k8s-node -> k8s_node
calico-rr -> calico_rr
no-floating -> no_floating
Note: kube-node,k8s-cluster groups in upgrade CI
need clean-up after v2.16 is tagged
* ensure old groups are mapped to the new ones
By default Ansible stat module compute checksum, list extended attributes and find mime type
To find all stat invocations that really use one of those:
git grep -F stat. | grep -vE 'stat.(islnk|exists|lnk_source|writeable)'
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Added force_etcd_cert_refresh var to maintain existing functionality. Broke out etcd node cert syncing from member and admin cert sync logic. Now first etcd will sync node certs to other etcd members on every run to keep all etcds up to date after adding additional worker nodes to the cluster
* Updated etcd cert check tasks to better detect when new certificates need to be generated
* Move usage of force_etcd_cert_refresh var to gen_certs fact set
* Force etcd cert generation per server if force_etcd_cert_refresh is set to true
* Include gathering of node certs even if k8s-cluster member and in etcd group.
* Removed run_once due to when statement
* etcd: etcd-events doesn't depend on etcd_cluster_setup
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: remove condition already present on include_tasks
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: fix scaling up
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: use *access_addresses, do not delegate to etcd[0]
We want to wait for the full cluster to be healthy,
so use all the cluster addresses
Also we should be able to run the playbook when etcd[0] is down
(not tested), so do not delegate to etcd[0]
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: use failed_when for health check
unhealthy cluster is expected on first run, so use failed_when
instead of ignore_errors to remove scary red messages
Also use run_once
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes/preinstall: ensure ansible_fqdn is up to date after changing /etc/hosts
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes/master: regenerate apiserver cert if needed
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
The variable is defined in `kubernetes/preinstall` role and used in several roles. Since `kubernetes/preinstall` is not always included when `ansible-playbook` is run with tag selectors (see #5734 for reason), they will fail, or individual roles must copy the same fact definitions (as in #3846). Moving the definition to the always-included `kubespray-defaults` role will resolve the dependency problem.
- This solves issue #5721 & #5713 (dupes)
- Provide a cleaner default usage pattern for the download role
around etcd that supports 'host' and 'docker' properly
- Extract the 'etcdctl' as a separate task install piece and reuse it where
appropriate
- Update the kubeadm-etcd task to reflect the above change
* Fix recover-control-plane to work with etcd 3.3.x and add CI
* Set default values for testcase
* Add actual test jobs
* Attempt to satisty gitlab ci linter
* Fix ansible targets
* Set etcd_member_name as stated in the docs...
* Recovering from 0 masters is not supported yet
* Add other master to broken_kube-master group as well
* Increase number of retries to see if etcd needs more time to heal
* Make number of retries for ETCD loops configurable, increase it for recovery CI and document it
Max Gautier
Samuel Liu
Arthur Outhenin-Chalandre
yangsenzk
Kenichi Omichi
Karl Fischer
ERIK
Alessio Greggi
Mac Chaffee
Tom Janson
Ilya Margolin
Florian Ruynat
Iago Santos
Cristian Calin
Hari Hud
Etienne Champetier
David Louks
Robin Elfrink
Hannes Körber
Emerson Ford
Sergey
Florent Monbillard
Maxime Guyot
Barry Melbourne
Joel Seguillon
Etienne Champetier
Xiaodu
Stephen Schmidt
Sylvain Chateau
Erwan Miran
qvicksilver
Matthew Mosesohn
MarkusTeufelberger