cd153a1fb3
Fix kubernetes cert permission sync
...
Add `state: directory` to `file` task so that `recurse: yes` will actually take effect and ensure
certs/keys have the right file mode and owner
2018-03-09 00:11:10 -06:00
b0ab92c921
Prefix system:node CRB
...
Change the name of `system:node` CRB to `kubespray:system:node` to avoid
conflicts with the auto-reconciled CRB also named `system:node`
Fixes #2121
2018-03-08 23:56:46 -06:00
5007a69eee
Merge pull request #2437 from huzhengchuan/fix/callo-routereflector
...
Fix always download calico_rr image
2018-03-08 23:22:48 -06:00
8a46e050e3
Merge pull request #2433 from octarinesec/eyeofthefrog/systemd_command_fix
...
Fix systemd version detection
2018-03-08 22:28:12 -06:00
8e36ad09b4
clean http-proxy.conf
2018-03-08 23:16:02 +08:00
96a92503cb
Fix always download calico_rr image
2018-03-08 17:04:16 +08:00
5253153dbb
Merge pull request #2416 from riverzhang/delete-node
...
Remove nodes
2018-03-08 01:55:20 -06:00
12c78e622b
Remove nodes
...
Drain node except daemonsets resource
Use reset cluser for delete deploy data
Then delete node
2018-03-08 15:03:42 +08:00
216bf2e867
Merge pull request #2422 from riverzhang/patch-5
...
Enable OOM killing for etcd-events
2018-03-07 23:15:19 -06:00
a086686e9f
Support multiple artifacts under individual inventory directory
2018-03-08 11:57:53 +08:00
6402004018
FIXUP #2424 : local_provisioner directory should be created only if enabled
2018-03-08 11:57:46 +08:00
955f833120
Merge pull request #2430 from huzhengchuan/fix/kube-reserve
...
fix the name of some variable
2018-03-07 21:25:32 -06:00
605738757d
Fix systemd version detection
...
Change "command" to "shell" in order for the pipe to work correctly
2018-03-07 11:32:47 -08:00
3f96b2da7a
Add Custom ConfigMap Support for ingress-nginx
2018-03-07 21:37:45 +08:00
dbf40bbbb8
docker-ce instead of docker-engine repo ( #2423 )
...
* Use docker-ce 17.03.2
* Docker-engine may be discarded
2018-03-07 15:11:20 +03:00
646d473e8e
fix the name of some variable
2018-03-07 18:30:34 +08:00
6975cd1622
Merge pull request #2419 from hswong3i/ingress_nginx_labels
...
Add labels for ingress_nginx_namespace
2018-03-06 08:01:13 +02:00
b7f9bf43c2
Merge pull request #2421 from ctlam/master
...
Adding ssh_private_key_file to ProxyCommand
2018-03-06 07:59:26 +02:00
388b627f72
Enable OOM killing for etcd-events
...
Enable OOM killing like docker run etcd
2018-03-05 20:46:39 -06:00
f9019ab116
Adding ssh_private_key_file to ProxyCommand
...
This is trying to match what the roles/bastion-ssh-config is trying to do. When the setup is going through bastion, we want to ssh private key to be used on the bastion instance.
2018-03-05 13:15:10 -08:00
07657aecf4
add support for azure vnetResourceGroup
2018-03-05 13:40:25 -06:00
e65904eee3
Add labels for ingress_nginx_namespace, also only setup serviceAccountName if rbac_enabled
2018-03-05 23:11:18 +08:00
89847d5684
Explicitly defines the --kubelet-preferred-address-types parameter
...
to the API server configuration.
This solves the problem where if you have non-resolvable node names,
and try to scale the server by adding new nodes, kubectl commands
start to fail for newly added nodes, giving a TCP timeout error when
trying to resolve the node hostname against a public DNS.
2018-03-05 15:25:14 +01:00
585303ad66
Start with three dashes for consistency
2018-03-03 10:05:05 +04:00
a800ed094b
Added support for webhook authentication/authorization on the secure kubelet endpoint
2018-03-03 10:00:09 +04:00
fd46442188
Integrate kubernetes/ingress-nginx 0.11.0 to Kubespray
2018-03-02 23:33:19 +08:00
9837b7926f
Use proper lookup of etcd host for calico ( #2408 )
...
Fixes #2397
2018-03-02 15:36:52 +03:00
b75b6b513b
Merge pull request #2406 from riverzhang/fedora
...
Delete unused fedora docker repo
2018-03-02 09:33:57 +02:00
2a3b48edaf
Delete unused fedora docker repo
2018-03-02 14:39:13 +08:00
5cc77eb6fd
Merge pull request #2294 from Nowaker/patch-1
...
Enable OOM killing
2018-03-01 14:56:26 +01:00
8b21034b31
Merge pull request #2344 from hswong3i/local_volume_provisioner_fixup
...
Upgrade Local Volume Provisioner Addon to v2.0.0
2018-03-01 13:12:44 +02:00
67ffd8e923
Add etcd-events cluster for kube-apiserver ( #2385 )
...
Add etcd-events cluster for kube-apiserver
2018-03-01 11:39:14 +03:00
af7edf4dff
Merge pull request #2369 from eviln1/fix-insecure-apiserver-port
...
fix apiserver manifest when disabling insecure_port
2018-02-28 17:48:08 -06:00
0fd3b9f7af
Merge pull request #2391 from Miouge1/latest-helm
...
Install latest version of Helm
2018-02-28 15:04:41 -05:00
7ef9f4dfdd
Revert "Add pre-upgrade task for moving credentials file" ( #2393 )
2018-02-28 22:41:52 +03:00
6ce507f39f
Merge pull request #2345 from mattymo/credentials_upgrade_fix
...
Add pre-upgrade task for moving credentials file
2018-02-28 12:39:02 -06:00
34cab91e86
Merge pull request #2366 from z1nkum/bump_dashboard_tag
...
Bump dashboard from 1.8.1 to 1.8.3 because of reload bug
2018-02-28 12:38:34 -06:00
63de9bdba3
Merge pull request #2363 from whereismyjetpack/default-kube-proxy
...
default kube_proxy_mode in kubernetes-defaults
2018-02-28 12:37:46 -06:00
afb6e7dfc3
Merge pull request #2362 from mattymo/calico_ignore_extra_pools_again
...
Use CNI to assign kube_pods_subnet for calico
2018-02-28 12:36:50 -06:00
ad89d1c876
Update pre_upgrade.yml
2018-02-28 19:07:44 +03:00
6b80ac6500
Fix indexing of supplementary DNS in openssl.conf
2018-02-28 16:04:52 +00:00
2257dc9baa
Install latest version of Helm
2018-02-28 16:29:38 +01:00
977e7ae105
remove obsolete init image, bump dashboard version 1.8.1 -> 1.8.3
2018-02-28 12:52:59 +03:00
bc0fc5df98
Use node cert for etcd tasks instead of delegating to first etcd ( #2386 )
...
For etcdctl commands, use admin cert instead of node because this file
doesn't exist on etcd only hosts.
2018-02-27 22:23:51 +03:00
bb469005b2
Add pre-upgrade task for moving credentials file
2018-02-27 17:35:15 +03:00
89ade65ad6
Fixing etcd certs for calico rr ( #2374 )
2018-02-27 17:34:07 +03:00
128d3ef94c
Fix run kubectl error ( #2199 )
...
* Fix run kubectl error
Fix run kubectl error when first master doesn't work
* if access_ip is define use first_kube_master
else different master use a different ip
* Delete set first_kube_master and use kube_apiserver_access_address
2018-02-27 16:32:20 +03:00
b7e06085c7
Upgrade to Kubernetes v1.9.3 ( #2323 )
...
Upgrade to Kubernetes v1.9.3
2018-02-27 14:31:59 +03:00
9e85a023c1
Merge pull request #2360 from mattymo/reset_fixes
...
retry unmount kubelet dirs
2018-02-26 18:30:38 -06:00
4b5f780ff0
Merge pull request #2357 from octarinesec/eyeofthefrog/set_TasksMax_infinity_for_ubuntu
...
Set TasksMax to infinity on any OS with systemd
2018-02-22 21:31:10 -06:00
31659efe13
Fixing cert name in calico/canal for etcd check ( #2358 )
2018-02-22 17:37:07 +03:00
2bd3776ddb
fix apiserver manifest when disabling insecure_port
2018-02-22 14:00:32 +01:00
c874f16c02
Fixing credential lookup for fe proxy and vault ( #2361 )
2018-02-22 15:09:26 +03:00
ba91304636
Fixed generate front proxy client certs with vault ( #2359 )
...
* Fixed generate front proxy client certs with vault
* fix vault cert management
* Distrebute etcd node certs to vault hosts
2018-02-22 15:08:50 +03:00
42a0f46268
Add health check to kube proxy ( #2356 )
...
Adding health checking to kube proxy. Fixes #2308
2018-02-21 23:14:45 +03:00
d84ff06f73
Set filemode to 0640 ( #2315 )
...
* Set filemode to 0640
weave-net.yml file is readable by all users on the host. It however contains the weave_password to encrypt all pod communication. It should only be readable by root.
* Set mode 0640 on users_file with basic auth
2018-02-21 23:13:46 +03:00
87f33a4644
Use CNI to assign kube_pods_subnet for calico
...
Now calico can be deployed if there are other existing pools
and not confuse IPAM and end up with pods in the wrong pools.
2018-02-21 20:32:28 +03:00
2d69b05c77
set local_release_dir in downloads to match others
2018-02-21 11:35:34 -05:00
2eb57ee5cd
default kube_proxy_mode in kubernetes-defaults
2018-02-21 11:33:25 -05:00
85c69c2a4a
Add check for atomic hosts in template
2018-02-21 08:26:18 -08:00
c20f38b89c
retry unmount kubelet dirs
2018-02-21 14:41:57 +03:00
d4c61d2628
Fixup for gce_centos7-flannel-addons
2018-02-21 13:41:25 +08:00
deef47c923
Upgrade Local Volume Provisioner Addon to v2.0.0
2018-02-21 13:41:25 +08:00
c19d8994b9
Set TasksMax to infinity on any OS with systemd
2018-02-20 11:55:13 -08:00
2de6da25a8
Merge pull request #2312 from woopstar/patch-7
...
Added iptables lock fix and ajusted oom-score
2018-02-19 22:47:07 -06:00
f13e76d022
Added cilium support ( #2236 )
...
* Added cilium support
* Fix typo in debian test config
* Remove empty lines
* Changed cilium version from <latest> to <v1.0.0-rc3>
* Add missing changes for cilium
* Add cilium to CI pipeline
* Fix wrong file name
* Check kernel version for cilium
* fixed ci error
* fixed cilium-ds.j2 template
* added waiting for cilium pods to run
* Fixed missing EOF
* Fixed trailing spaces
* Fixed trailing spaces
* Fixed trailing spaces
* Fixed too many blank lines
* Updated tolerations,annotations in cilium DS template
* Set cilium_version to iptables-1.9 to see if bug is fixed in CI
* Update cilium image tag to v1.0.0-rc4
* Update Cilium test case CI vars filenames
* Add optional prometheus flag, adjust initial readiness delay
* Update README.md with cilium info
2018-02-16 21:37:47 -06:00
95e2bde15b
set nodeName to "{{ inventory_hostname }}" in kubeadm-config
2018-02-16 16:20:08 -05:00
4c280e59d4
Use legacy policy config to apply the scheduler policy
2018-02-16 13:43:35 +01:00
76a89039ad
Merge pull request #2285 from jasdeep-hundal/do_not_install_python_apt
...
Remove redundant python-apt install
2018-02-15 17:04:08 +01:00
c0aad0a6d5
Fix install etcd by host service ( #2297 )
...
Fix bug issues #2289
2018-02-12 17:34:01 +01:00
41ca67bf54
Added iptables lock fix and ajusted oom-score
...
xtables lock was missing. Added new option for oom-score to make sure it's not killed in an OOM situation before regular pods.
2018-02-12 10:21:38 +01:00
d72232f15b
Increased timeout values for k8s API server restart
2018-02-12 07:35:29 +00:00
03c61685fb
Added apiserver extra args variable for kubeadm config ( #2291 )
2018-02-12 10:29:46 +03:00
46284198f8
Merge pull request #2298 from clkao/patch-2
...
Fix version comparison
2018-02-11 17:22:39 +01:00
bbb1da1a83
Fix default_resolver is undefined
...
fix issues #2265
2018-02-10 10:08:26 -06:00
07075add3d
Add optional StorageClass name with cephfs_provisioner_storage_class
2018-02-10 20:31:34 +08:00
338238d086
Fix version comparison
...
`FAILED! => {"changed": false, "msg": "AnsibleFilterError: Version comparison: unorderable types: str() < int()"}`
2018-02-10 03:49:49 +08:00
03bb729fea
Making status and detection mo betta
2018-02-09 12:30:46 -06:00
f8a59446e8
Enable OOM killing
...
When etcd exceeds its memory limit, it becomes useless but keeps running.
We should let OOM killer kill etcd process in the container, so systemd can spot
the problem and restart etcd according to "Restart" setting in etcd.service unit file.
If OOME problem keep repeating, i.e. it happens every single restart,
systemd will eventually back off and stop restarting it anyway.
--restart=on-failure:5 in this file has no effect because memory allocation error
doesn't by itself cause the process to die
Related: https://github.com/kubernetes-incubator/kubespray/blob/master/roles/etcd/templates/etcd-docker.service.j2
This kind of reverts a change introduced in #1860 .
2018-02-09 11:00:13 -06:00
4e61fb9cd3
Refactored kubeadm join process and fixed uncrodonng for master nodes
2018-02-09 15:51:47 +01:00
b472c2df98
Fix safe upgrade
...
Even though there it kubeadm_token_ttl=0 which means that kubeadm token never expires, it is not present in `kubeadm token list` after cluster is provisioned (at least after it is running for some time) and there is issue regarding this https://github.com/kubernetes/kubeadm/issues/335 , so we need to create a new temporary token during the cluster upgrade.
2018-02-09 15:51:47 +01:00
bc67deee78
Added missing cephfs_provisioner_enabled to kubespray-defaults vars
2018-02-09 17:03:38 +03:00
f57abae01e
Remove redundant python-apt install
...
Ansible automatically installs the python-apt package when using
the 'apt' Ansible module, if python-apt is not present. This patch
removes the (unneeded) explicit installation in the Kubespray
'preinstall' role.
2018-02-08 18:59:37 -08:00
275b1d6897
Merge pull request #2274 from mirwan/local_volume_provisioner_configmap_in_daemonset
...
Local volume provisioner fixes
2018-02-09 00:59:47 +01:00
e9a676951b
storageClass name template as suggested by @eyeofthefrog
2018-02-09 00:11:07 +01:00
b31d905704
Merge pull request #2230 from hswong3i/cephfs_provisioner
...
Add cephfs_provisioner Support for Kubespray
2018-02-08 16:52:15 +01:00
c70c44b07b
Merge pull request #2257 from rzenker/tb/baremetal-tweaks
...
baremetal tweaks
2018-02-08 15:48:55 +00:00
20583e3d15
Merge pull request #2067 from manics/sysctl-net-brfilter
...
Always set net.bridge.bridge-nf-call-* sysctl
2018-02-08 15:43:46 +00:00
9f4588cd0c
Merge pull request #2266 from riverzhang/epel-release
...
Disalbe install epel-release rpm on Centos/Redhat
2018-02-08 15:42:28 +00:00
b25e0f82b1
Add cephfs_provisioner Support for Kubespray
2018-02-08 22:27:54 +08:00
cae1c683aa
Merge pull request #2271 from leseb/retry-get-token
...
kubernetes-apps: retry get default token name
2018-02-08 16:46:32 +03:00
57e7a5a34a
Merge pull request #2233 from hswong3i/multiple_inventory_dir
...
Support multiple inventory files under individual inventory directory
2018-02-08 11:57:04 +01:00
7bce70339f
Merge pull request #2251 from woopstar/metrics-server-patch-2
...
Adding metrics-server support for K8s version 1.9
2018-02-08 11:16:44 +01:00
e1aaef7d4d
Removal of surnumerary slash
2018-02-08 09:06:17 +01:00
1a1d154e14
Support multiple inventory files under individual inventory directory
2018-02-08 08:08:15 +08:00
384e5dd4c4
Merge pull request #2160 from kongslund/disable-read-only-port
...
Make the Kubelet read-only port configurable and disable it by default
2018-02-07 13:06:32 -06:00
abfb147292
MountDir in configmap and daemonset must be the same
2018-02-07 18:42:42 +01:00
44eb03f78a
typo
2018-02-07 17:57:54 +01:00
857784747b
local-provisioner:v1.0.1 still expects json configmap
2018-02-07 17:47:05 +01:00
7a2cb5e41c
local-provisioner:v1.0.1 still uses VOLUME_CONFIG_NAME env to read ConfigMap
2018-02-07 17:01:19 +01:00
712bdfc82f
Merge pull request #2260 from mirwan/local_volume_provisioner_fixes
...
local_volume_provisioner_enabled replacement
2018-02-07 13:42:00 +01:00
34bd47de79
kubernetes-apps: retry get default token name
...
In some installation, it can take up to 3sec to get the value. Retrying
for 5 sec will ensure the command won't return 1.
Signed-off-by: Sébastien Han <seb@redhat.com>
2018-02-07 12:09:51 +01:00
fe57c13b51
Merge pull request #2172 from leseb/etcd-auth
...
etcd: ability to enable/disable ETCD_PEER_CLIENT_CERT_AUTH
2018-02-07 11:25:56 +01:00
f9df692056
Issue front proxy certs for vault
2018-02-07 11:03:10 +01:00
f193b12059
Kubeadm auto creates this
2018-02-07 10:50:34 +01:00
2cd254954c
Remove defaults of allowed names. Updated kubeadm
2018-02-07 10:07:55 +01:00
4dab92ce69
Rename from aggregator-proxy-client to front-proxy-client to match kubeadm design. Added kubeadm support too. Changed to use variables set and not hardcode paths. Still missing cert generation for Vault
2018-02-07 09:50:19 +01:00
ca08614641
yamllint fix
2018-02-07 09:12:28 +01:00
47adf4bce6
Disalbe install epel-release rpm on Centos/Redhat
...
1.Disalbe install epel-release rpm on Centos/Redhat
2.Use yum install epel-release
2018-02-07 14:58:50 +08:00
7928cd20fb
Merge pull request #2037 from tiewei/contiv-etcd-split
...
Split contiv etcd and etcd-proxy into two daemonsets
2018-02-06 15:37:16 -06:00
ad9049a49e
baremetal tweaks
...
* allow installs to not have hostname overriden with fqdn from inventory
* calico-config no longer requires local as and will default to global
* when cloudprovider is not defined, use the inventory_hostname for cni-calico
* allow reset to not restart network (buggy nodes die with this cmd)
* default kube_override_hostname to inventory_hostname instead of ansible_hostname
2018-02-06 13:52:22 -05:00
b4e264251f
JSON/YAML syntax fix
2018-02-06 17:17:10 +01:00
8006a6cd82
local_volumes_enabled replaced by local_volume_provisioner_enabled
2018-02-06 17:12:09 +01:00
5cd6b0c753
Adding missing defaults for weave
...
The PR #2203 add's missing defaults for weave, but no signed CLA. So this PR fixes it.
2018-02-06 14:25:07 +01:00
bb339265fc
Set default registry_enabled to false
...
In PR #2244 the `registry_enabled` is missing in defaults, causing a deployment to fail, if it is not set in k8s-cluster.yml
2018-02-06 14:17:06 +01:00
bb4446e94c
Merge pull request #2226 from manics/supplemental-addresses
...
Enable additional addresses to be added to certificates
2018-02-06 13:51:54 +01:00
d2102671cd
Merge pull request #2214 from woopstar/patch-3
...
Loadbalancer Apiserver Address is missing
2018-02-06 13:47:55 +01:00
138e0c2301
Merge pull request #2250 from woopstar/weave-mtu-patch
...
Added option to set MTU on Weave
2018-02-06 12:13:54 +01:00
37cfd289d8
Merge pull request #2248 from hswong3i/dashboard.yml.j2
...
Dashboard template should not suffix with .yml.j2
2018-02-06 11:25:02 +01:00
9f3081580a
Merge pull request #2249 from hswong3i/kubedns-deploy.yml.j2
...
KubeDNS template should not suffix with .yml.j2
2018-02-06 11:24:19 +01:00
a3248379db
Merge branch 'master' into local_volume_provisioner
2018-02-06 09:28:27 +01:00
0774c8385c
Merge pull request #2244 from hswong3i/registry
...
Migrate Kubernetes v1.9.1 cluster/addons/registry to Kubespray
2018-02-06 09:20:48 +01:00
b2d30d68e7
Rename CN for aggreator back. Add flags to apiserver when version is >= 1.9
2018-02-05 20:37:14 +01:00
82d10b882c
Added fixes from whereismyjetpack
2018-02-05 20:07:12 +01:00
95b8ac5f62
Added optional controller and scheduler extra args to kubeadm config ( #2205 )
2018-02-05 16:49:13 +03:00
0b4168cad4
WIP. Adding metrics-server support for K8s version 1.9
2018-02-05 10:37:41 +01:00
3289472e31
Added option to set MTU on Weave
2018-02-05 10:23:48 +01:00
4ad53339f6
KubeDNS template should not suffix with .yml.j2
2018-02-05 16:26:54 +08:00
a4d3da6a8e
Dashboard template should not suffix with .yml.j2
2018-02-05 16:18:21 +08:00
7954ea2525
Migrate Kubernetes v1.9.1 cluster/addons/registry to Kubespray
2018-02-05 12:21:09 +08:00
bd1f0bcfd7
Merge pull request #2201 from riverzhang/ipvs
...
Support ipvs mode for kube-proxy
2018-02-01 22:29:52 -06:00
bc2e26d7ef
update apiVersion
2018-02-01 14:16:32 +08:00
fd80013917
lint and cleanup local_volume_provisioner
2018-02-01 14:14:18 +08:00
f7d52564aa
Merge pull request #2084 from riverzhang/devicemapper
...
Fix can not use devicemapper driver
2018-01-31 20:52:22 -06:00
f7e8d1149a
Merge pull request #2229 from whereismyjetpack/etcd-quorum-read
...
--etcd-quorum-read is depricated in kube >= 1.9
2018-01-31 17:10:10 -05:00
bd091caaf9
Merge pull request #2200 from riverzhang/hyperkube
...
Upgrade to Kubernetes v1.9.2
2018-01-31 16:08:22 -05:00
b455a1bf76
Merge pull request #2212 from mattymo/missing_defaults
...
Add missing group var default values to kubespray-defaults
2018-01-31 16:07:53 -05:00
c0a3bcf9b3
Merge pull request #2221 from Xuxe/patch-vcp-v1.9.2
...
Updated vSphere cloud provider config for Kubernetes >= v1.9.2 and added resource pool deployment variable
2018-01-31 16:06:07 -05:00
dc6c703741
--etcd-quorum-read is depricated in kube >= 1.9
2018-01-31 15:49:52 -05:00
16629d0b8e
Vault should use cert auth for etcd
2018-01-31 20:37:14 +03:00
7f79210ed1
reworked vsphere-cloud-config template
2018-01-31 16:51:23 +01:00
27a1a697e7
supplementary_addresses_in_ssl_keys can be a hostname
2018-01-31 15:16:08 +00:00
c1267004ef
Merge pull request #2130 from ArchiFleKs/simplify_os_provider
...
Simplify and update OpenStack cloud provider
2018-01-31 12:02:02 +02:00
9cdd2214f9
render vsphere_resource_pool only if defined
2018-01-31 09:56:43 +01:00
989e9174c2
Added vSphere cloud provider config update for Kubernetes >= 1.9.2
2018-01-31 09:15:46 +01:00
3993e12335
Fix can not be used devicemapper driver
...
Fix can not be used devicemapper driver
2018-01-31 15:51:11 +08:00
ac4d782937
Merge pull request #2074 from fangzhen/fix-domains-split
...
Make spliting system_search_domains more robust
2018-01-30 21:01:19 -06:00
32d18ca992
remove trailing space
2018-01-31 09:50:41 +08:00
2df4b6c5d2
Rename default_resolver to cloud_resolver ( #2209 )
...
Cloud resolvers are mandatory for hosts on GCE and OpenStack
clouds. The 8.8.8.8 alternative resolver was dropped because
there is already a default nameserver. The new var name
reflects the purpose better.
Also restart apiserver when modifying dns settings.
2018-01-31 00:26:07 +03:00
088d36da09
Increase the idx counter
...
Fix the idx counter to increase too, or you will end up with two same indexes.
2018-01-30 21:48:13 +01:00
6f36faa4f9
Loadbalancer Apiserver Address is missing
...
If you configure your external loadbalancer to do a simple tcp pass-through to the api servers, and you do not use a DNS FQDN but just the ip, then you need to add the ip adress to the certificates too.
Example config:
```
## External LB example config
apiserver_loadbalancer_domain_name: "10.50.63.10"
loadbalancer_apiserver:
address: 10.50.63.10
port: 8383
```
2018-01-30 17:33:00 +01:00
3846384d56
Bump kube-dns to 1.14.8 ( #2204 )
...
Bump kube-dns to 1.14.8
2018-01-30 19:23:37 +03:00
331f141f63
Fix DNS entries in etcd's openssl.conf by adding a newline. ( #2208 )
...
DNS entries generated from 'etcd_cert_alt_names' variable in etcd's
openssl.conf are not terminated by a newline.
This fixes issue #2207 .
2018-01-30 16:26:58 +03:00
62dd3d2a9d
Add missing group var default values to kubespray-defaults
2018-01-30 16:04:00 +03:00
fa8a128e49
etcd: ability to enable/disable ETCD_PEER_CLIENT_CERT_AUTH
...
Some installation are failing to authenticate with peers due to
etcd picking up/resoling the wrong node.
By setting 'etcd_peer_client_auth' to "False" you can disable peer client cert
authentication.
Signed-off-by: Sébastien Han <seb@redhat.com>
2018-01-30 11:19:12 +01:00
b10c308a5a
Support ipvs mode for kube-proxy
...
Support ipvs mode for kube-proxy
2018-01-30 13:09:01 +08:00
e22c70e431
Upgrade to Kubernetes v1.9.2
2018-01-30 13:04:38 +08:00
f4fe9e3421
Merge pull request #2171 from ArchiFleKs/kubeproxy-lvs
...
Add lib/modules to kube-proxy to enable LVS
2018-01-29 22:58:02 -06:00
da173615e4
Merge pull request #2048 from xizhibei/master
...
Fix: always only one container got synced after download
2018-01-29 16:01:11 -06:00
dc6a17e092
Use include/import tasks ( #2192 )
...
import_tasks will consume far less memory, so it should be
used whenever it is compatible.
2018-01-29 14:37:48 +03:00
240d4193ae
Update information about network sizes
2018-01-26 15:23:21 +01:00
ac66e98ae9
Upgrade to Kubernetes v1.9.1 ( #2152 )
...
Raise drain timeout to 5m
2018-01-25 18:44:44 +03:00
d2935ffed0
Optionally ignore the presence of extra calico pools ( #2190 )
2018-01-25 18:44:20 +03:00
c6e0fcea31
Merge pull request #1948 from sgmitchell/secured-etcd
...
Enable etcd secure client to prevent etcdctl access without cert and key
2018-01-25 09:35:51 -06:00
5d014d986b
Merge pull request #1992 from manics/flannel-hairpin
...
Enable flannel hairpin mode
2018-01-24 21:20:03 -06:00
714994cad8
iptables: flush nat table as well as filter table upon reset ( #2174 )
...
* iptables: flush nat table as well as filter table upon reset
* Indentation fix
2018-01-24 20:22:49 -06:00
08fe61e058
Merge pull request #2071 from riverzhang/dashboard
...
Update dashboard version to v1.8.1
2018-01-24 20:10:05 -06:00
0c8bed21ee
Merge pull request #2019 from chadswen/disable-api-insecure-port
...
Support for disabling apiserver insecure port (the sequel)
2018-01-24 19:58:53 -06:00
98eb845f8c
Merge pull request #2173 from mirwan/hardcoded_dnsmasq-autoscaler_image
...
Dnsmasq autoscaler image should be a variable
2018-01-24 16:15:59 -06:00
98300e3165
Merge pull request #2155 from brutus333/fix/pvc
...
Fix for Issue #2141
2018-01-24 16:15:33 -06:00
e22759d8f0
fix nodePort for weave
2018-01-24 10:31:51 +01:00
bf1411060e
Add optional manual dns_mode ( #2178 )
2018-01-23 14:28:42 +01:00
a4d142368b
Renamed variable from disable_volume_zone_conflict to volume_cross_zone_attachment and removed cloud provider condition; fix identation
2018-01-23 13:14:00 +00:00
eb80f9b606
Merge pull request #2154 from tdihp/proxy-conf-restart-docker
...
Restart docker when http-proxy.conf changed.
2018-01-22 08:39:05 -06:00
ae47b617e3
Fix 'no such host' problem ( #2148 )
...
Fix 'no such host' problem reported by commands *kubectl logs* and *kubectl exec*
when cloud_provider is OpenStack
Closes : #2147
2018-01-22 16:08:24 +03:00
e5b4011aa4
move hardcoded dnsmasq autoscaler image to its own variable
2018-01-18 16:04:29 +01:00
3125f93b3f
Added disable_volume_zone_conflict variable
2018-01-18 10:55:23 +00:00
f19c8e8c1d
Merge pull request #2132 from PhilippeChepy/flex-volumes
...
Add support for flex volumes plugins.
2018-01-17 15:00:45 -05:00
637604d08f
Add lib/modules to kube-proxy to enable LVS
...
kube-proxy is complaining of missing modules at startup. There is a plan
to also support an LVS implementation of kube-proxy in additon to
userspace and iptables
2018-01-17 16:35:53 +01:00
11844c987c
Make the Kubelet read-only port configurable and disable it by default. Fixes #2159 .
2018-01-16 11:11:41 +04:00
8c45c88d15
Fix for Issue #2141 - added policy file
2018-01-12 07:15:35 +00:00
c87bb2f239
Fix for Issue #2141
2018-01-12 07:07:02 +00:00
32eeb9a0e0
Restart docker when http-proxy.conf changed.
2018-01-12 10:56:25 +08:00
df21fc8643
Remove initContainer
2018-01-10 12:17:17 +08:00
ccd9cc3dce
Merge pull request #2146 from abelgana/master
...
Manage deprecated kubelet option
2018-01-09 17:19:42 -05:00
81867402f6
Merge pull request #2145 from pslijkhuis/master
...
Add kubelet_custom_flags to kubelet.kubeadm.env.j2
2018-01-09 17:19:09 -05:00
4f5d61212b
Merge pull request #2144 from neith00/weave-2.1.3
...
updated weave to 2.1.3
2018-01-09 17:18:26 -05:00
ef96123482
Merge pull request #2068 from chadswen/remove-container-retries
...
Retry kube container removal during upgrade
2018-01-09 15:03:50 -05:00
ee27ab0052
Merge pull request #2124 from riverzhang/patch-3
...
Remove blank lines
2018-01-09 14:58:49 -05:00
57f87ba083
Merge pull request #2142 from trilogy-group/hotfix/fluentd-template
...
fix fluentd template
2018-01-09 14:44:50 -05:00
a9bb72c6fd
require-kubeconfig is depricated since k8s v1.8
2018-01-09 14:35:42 -05:00
9506c2e597
require-kubeconfig is deprecated since K8s v1.8
2018-01-09 14:33:05 -05:00
32884357ff
Add kubelet_custom_flags to kubelet.kubeadm.env.j2
2018-01-09 14:04:36 +01:00
88204642b7
updated weave to 2.1.3
2018-01-09 13:50:42 +01:00
1401286910
Add support for cert alt names for etcd ( #2139 )
...
* Add support for cert alt names for etcd
* Update gen_certs_vault.yml
2018-01-09 14:37:34 +03:00
12eb242224
fix fluentd template
2018-01-08 13:40:47 +00:00
df9faa1743
Add support for flex volumes plugins.
2018-01-05 17:56:36 +01:00
ce85bcaee7
Simplify and update OpenStack cloud provider
...
Simplify the number of variables necessary to "just" enable OpenStack
cloud provider. Also add the new options available in K8s 1.9.
2018-01-05 12:05:24 +01:00
6ed2a60978
fix run dashboard error
2018-01-04 13:13:36 +08:00
bac3bf1a5f
Fix auto-evaluated API access endpoint for bind IP ( #2086 )
...
Auto configure API access endpoint with a custom bind IP, if provided.
Fix HA docs' http URLs are https in fact, clarify the insecure vs secure
API access modes as well.
Closes: #issues/2051
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2018-01-03 17:40:21 +01:00
chadswen
RongZhang
zhengchuan hu
Wong Hoi Sing Edison
Chris Mildebrandt
Aivars Sterns
Dominic Lam
Michael Beatty
Ayaz Ahmed Khan
Jonas Kongslund
Matthew Mosesohn
Antoine Legrand
Spencer Smith
Brad Beam
Simon Li
Miouge1
Dmitry Vlasov
Nedim Haveric
Maxim Krasilnikov
Andreas Krüger
Matthew Mosesohn
Dann Bohn
melkosoft
Virgil Chereches
Chia-liang Kao
Brad Beam
Damian Nowak
mlushpenko
mkrasilnikov
jasdeep-hundal
Erwan Miran
Sébastien Han
Ryan Zenker
Julian Hübenthal
Simon Li
Dmitri Rubinstein
mirwan
Cornelius Keller
Stanislav Makar
ArchiFleKs
heping
abelgana
Peter Slijkhuis
neith00
Lukasz Piatkowski
Philippe Chepy
Bogdan Dobrelya