If running Kubespray on static IP environments, a task was failed like:
TASK [kubernetes/preinstall : Configure dhclient hooks for resolv.conf (RH-only)]
fatal: [ak8s2]: FAILED! => {
"changed": false, "checksum": "..",
"msg": "Destination directory /etc/dhcp/dhclient.d does not exist"}
This adds a check for dhclientconffile for running 0100-dhclient-hooks to
run the task only if dhcpclient is enabled.
* [calico] make vxlan encapsulation the default
* don't enable ipip encapsulation by default
* set calico_network_backend by default to vxlan
* update sample inventory and documentation
* [CI] pin default calico parameters for upgrade tests to ensure proper upgrade
* [CI] improve netchecker connectivity testing
* [CI] show logs for tests
* [calico] tweak task name
* [CI] Don't run the provisioner from vagrant since we run it in testcases_run.sh
* [CI] move kube-router tests to vagrant to avoid network connectivity issues during netchecker check
* service proxy mode still fails connectivity tests so keeping it manual mode
* [kube-router] account for containerd use-case
* Update ansible-lint to 5.4.0 (#8607)
It seems that the Rich version 11.0.0 has a breaking change.
So need to update ansible-lint to 5.3.2 or later.
* Fix for ansible-lint no-changed-when rule (#8607)
If kubelet is run with systemd (as it always is when using kubespray),
it starts in systemd's /system.slice/kubelet.service cgroup.
This commit prevents a creation and usage of a second unrelated cgroup.
* Use sysctl_file_path variable for all sysctl_file locations
* Add sysctl_file_path variable to kubespay-defaults
* Remove previously used sysctl file locations if present
* Use explicit filename in roles/kubernetes/node/defaults/main.yml
* Defaults: use explicit value
* Ensure entries for 1.23 are added for supported_versions vars
* cri-o: add support for kubernetes 1.23 but still use cri-o 1.22
* kubescheduler-config: diferentiate config versions based on kube_version
* containerd: change default resolvconf_mode to host_resolvconf
* Wait for kube-apiserver to come back after pod refresh
* Handle resolv.conf gracefully
* Retain currently configured DNS entries to ensure we don't break the resolvers
* Suse uses wickedd for network management so no dhcp hooks
* Molecule: increase ansible timeout
* CI: Increase ansible timeout to 120s for Packet jobs
* Improve control plane scale flow (#13)
* Added version 1.20.10 of K8s
* Setting first_kube_control_plane to a existing one
* Setting first_kube_control_plane to a existing one
* change first_kube_master for first_kube_control_plane
* Ansible-lint changes
* Containerd: download containerd from upstream instead of using distro specific packages
split runc download to separate role
make bootstrap-os role deploy container-selinux and seccomp libraries
clean up package manager provided containerd
move variables to docker role that are no longer common with containerd
* Containerd: make molecule testing more relevant
* replace ubuntu18 with ubuntu20
* add centos8 and debian11 to molecule tests
* run kubernetes/preinstall role to ensure relevancy
of test including dependency packages
* CI: adjust test scenarios for downloaded containerd
* Add Rocky as a known OS
* Make sure Rocky includes bootstrap-centos.yml
* Update docs with Rocky Linux
* Rocky Linux wireguard and EPEL
* Rocky Linux in the list of supported distributions
to remove deprecation warning:
> Flag --feature-gates has been deprecated, This parameter should be set via the config file specified by the Kubelet's --config flag.
Kubespray deployment failed when using containerd backend on nodes that apparmor was not installed or previously removed. This PR ensure apparmor is installed by adding it into required_pkgs var.
Kubespray deployment failed when using containerd backend on nodes that apparmor was not installed or previously removed. This PR ensure apparmor is installed by adding it into required_pkgs var.
The path of kubeconfig should be configurable, and its default value
is /etc/kubernetes/admin.conf. Most paths of the file are configurable
but some were not. This make those configurable.
* Calico: make calico_min_version check relevant
* Calico: only check currently installed version against the oldest supported version by the previous release
On Debian 11, `ipset` just recommend `iptables` so on the system that apt is configured with `APT::Install-Recommends "0";` iptables will not install automatically.
* Fedora and RHEL use etc_t and the convention is <type_name>_t
* Docs: specify all values for preinstall_selinux_state
* CI: Add Fedora 34 with SELinux in enforcing mode
* Ansible: move to Ansible 3.4.0 which uses ansible-base 2.10.10
* Docs: add a note about ansible upgrade post 2.9.x
* CI: ensure ansible is removed before ansible 3.x is installed to avoid pip failures
* Ansible: use newer ansible-lint
* Fix ansible-lint 5.0.11 found issues
* syntax issues
* risky-file-permissions
* var-naming
* role-name
* molecule tests
* Mitogen: use 0.3.0rc1 which adds support for ansible 2.10+
* Pin ansible-base to 2.10.11 to get package fix on RHEL8
* Calico: align manifests with upstream
* allow enabling typha prometheus metrics
* Calico: enable eBPF support
* manage the kubernetes-services-endpoint configmap
* Calico: document the use of eBPF dataplane
* Calico: improve checks before deployment
* enforce disabling kube-proxy when using eBPF dataplane
* ensure calico_version is supported
follow new naming conventions for gcr's coredns image.
starting from 1.21 kubeadm assumes it to be `coredns/coredns`:
this causes the kubeadm deployment being unable to pull image, beacuse `v`
was also added in image tag, until the role `kubernetes-apps` ovverides
it with the old name, which is only compatible with <=1.7.
Backward comptability with kubeadm <=1.20 is mantained checking
kubernetes version and falling back to old names (`coredns:1.xx`) when
the version is less than 1.21
* rename ansible groups to use _ instead of -
k8s-cluster -> k8s_cluster
k8s-node -> k8s_node
calico-rr -> calico_rr
no-floating -> no_floating
Note: kube-node,k8s-cluster groups in upgrade CI
need clean-up after v2.16 is tagged
* ensure old groups are mapped to the new ones
* AlmaLinux: ansible>2.9.19 is needed to know about AlmaLinux
* AlmaLinux: identify as a centos derrivative
* AlmaLinux: add AlmaLinux to checks for CentOS
* Use ansible_os_family to compare family and not distribution
* Add KubeSchedulerConfiguration for k8s 1.19 and up
With release of version 1.19.0 of kubernetes KubeSchedulerConfiguration
was graduated to beta. It allows to extend different stages of
scheduling with profiles. Such effect is achieved by using plugins and
extensions.
This patch adds KubeSchedulerConfiguration for versions 1.19 and later.
Configuration is set to k8s defaults or to kubespray vars. Moving those
defaults to new vars will be done in following patch.
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
* KubeSchedulerConfiguration: add defaults
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
Cristian Calin
Julien Le Fur
Robin Wallace
Mathieu Parent
Unai Arríen
Alessio Greggi
Kenichi Omichi
onock
kakkotetsu
Takuya Murakami
Tom Janson
Mac Chaffee
Nicolas Goudry
Alex
Necatican Yıldırım
Ilya Margolin
Michael Schmitz
华忠啊
cyril-corbon
Florian Ruynat
Samuel Liu
Max Gautier
Romain ALBON
singeleaf
Alvaro Campesino
Hanna Bledai
Lubos Mercl
EDGsheryl
Pasquale Toscano
Gheorghe Isak
Omar Aloraini
Iago Santos
rtsp
Marcos Lorenzo
Victor Morales
Wang Zhen
Hari Hud
Daniil Muidinov
Smita Srivastava
cola-zero
spaced
Shinerrs
flix444
Kasakaze
Pavel Martynov
MRoci
Sergey
Etienne Champetier
emiran-orange
Maciej Wereski