flannel, ovn and multus network plugins did not support all taint keys. This
update changes the tolerations to support them all.
According to the documentation:
```
There are two special cases: An empty key with operator Exists matches all keys,
values and effects which means this will tolerate everything. An empty effect matches
all effects with key key.
```
Usage of the empty `key` and `effect` ensures the network plugin daemonset will
be deployed on every nodes (ex: in case of custom taints, or NoExecute effect)
Since weave 2.5.1, `NoExecute` taint effect is no more supported,
this changes the daemonset tolerations to change this behavior.
Also remove the toleration key `CriticalAddonsOnly` not required anymore.
* added required permissions for querying endpointslice resources
* copy-pasted role permissions from cilium install manifests
* bumped cilium version to v1.7.2
* Support configuring the insert mode
Defaults to the upstream default https://docs.projectcalico.org/v3.9/reference/felix/configuration
so nothing should change for existing deployments.
This allows coexistence with other firewall management technologies.
* Add a note to the sample config
* Added in code to allow control over pull policy for local path provisioner
* change to imagePullPolicy to use globally used variable k8s_image_pull_policy
* removed unusued variable from defaults
* updated contiv-etcd and cinder-csi-controllerplugin to use k8s_image_pull_policy variable
Raises limit from 100 to 300 because the default is far too low
and the pod can handle 300 with the given resources.
Change-Id: Ib1eec10da3d09d198933fcfe87291587e58d7cdb
I've tested this update by deploying a containerd / etcd cluster on top CentOS7,
MetalLB + NGINX Ingress. Upgrade using upgrade-cluster.yml
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Initially this was to fix a mis-indented approvers key. However, it turns
out that 'oilbeater' is not a member of kubernetes-sigs nor
kubernetes-incubator (the org this repo was migrated from). Thus this
OWNERS file is failing prow's validation check.
As a workaround I've opted to move them to emeritus_approver, which
isn't valiated and can be used as a hint for other approvers in this
repo
Cleaned up deprecated APIs:
apps/v1beta1
apps/v1beta2
extensions/v1beta1 for ds,deploy,rs
Add workaround for deploying helm using incompatible
deployment manifest.
Change-Id: I78b36741348f47a999df3841ee63cf4e6f377830
* Refactor calico-rr to run in k8s cluster with taint
Change-Id: I75a3169ff5b36ce8302fc7ef1c32d3eb697b5afa
* add preinstall checks
* rework calico/rr role
Change-Id: I2f0a7e6cb77cf91ad4a615923680760d2e5d9ca8
* add empty calico-rr group
Change-Id: I006c0a60db9b72d02245bf8fdfabcf982144a5ad
* Enable nodes to run calicoctl
per-node tasks require waiting for calico-node to be applied
Change-Id: Ibe1076b7334a2da0332f2dd766fde0c3f172d1f2
* cleanup tasks that should run on master
Change-Id: I43a837879ef41596f14657ecd7f813899b6865ae
* Switch run_once calico logic to just run on first master
Change-Id: I6893711e354f63c5e1eaf6ac2e23d9a6347a555d
* Add calico 3.7.3 support
* add calico_datastore variable to policy controller role
* add missing clusterrole rules for calico policy controller
* disable calico kube controller when kdd mode is used for versions < 3.6
* Add limited containerd support
Containerd support for Ubuntu + Calico
* Added CRI-O support for ubuntu
* containerd support.
* Reset containerd support.
* fix lint.
* implemented feedback
* Change task name cri xx instead of cri-o in reset task and timeout condition.
* set crictl to fixed version
* Use docker-ce's container.io package for containerd.
* Add check containerd is installable or not.
* Avoid stop docker when use containerd and optimize retry for reset.
* Add config.toml.
* Fixed containerd for kubelet.env.
* Merge PR #4629
* Remove unused ubuntu variable for containerd
* Polish code for containerd and cri-o
* Refactoring cri socket configuration.
* Configurable conmon.
* Remove unused crictl/runc download
* Now crictl and runc is downloaded by common crictl.yml.
* fixed yamllint error
* Fixed brokenfiles by conflict.
* Remove commented line in config.toml
* Remove readded v1.12.x version
* Fixed broken set_docker_image_facts
* Fix yamllint errors.
* Remove unused apt source
* Fix crictl could not be installed
* Add containerd config from skolekonov's PR #4601
* add macvlan cni to kubespray
* macvlan: lint yaml files and fix sample config file
* macvlan: add OWNERS file
* add macvlan to README
* macvlan : CI first shoot
* macvlan : CI add full masquerade
* delegate retrive pod cidr to master only
* macvlan: add config for CI
* macvlan: add netchecker deployment
Task "kube-roter | Set cni directory permissions"
sets ownership of /opt/cni/bin to "kube"
Task "kube-router | Copy cni plugins"
copies the binaries from the archive setting the ownership
back to "root"
Fix "kube-roter" typo
Signed-off-by: Alberto Murillo <albertomurillosilva@gmail.com>
* Fix nodeselectors for contiv and nginx-ingress
Change-Id: Ib3eb6bd87193c69a90ee944c9164a0b6792c79ba
* Set kube proxy mode to iptables for addons task
Change-Id: Iff71a71f672405c74b4708c71db15ddc4391a53a
We don't need to support upgrades from 2 year old installs,
just from the last major version.
Also changed most retried tasks to 1s delay instead of longer.
* Use K8s 1.14 and add kubeadm experimental control plane mode
This reverts commit d39c273d96.
* Cleanup kubeadm setup run on first master
* pin kubeadm_certificate_key in test
* Remove kubelet autolabel of kube-node, add symlink for pki dir
Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
This fixes an issue where the `nodename` in calico's cni config json can fall out of sync with the k8s node name used by the calico pod if `kube_override_hostname` is set
* Calico: Ability to define the default IPPool CIDR (instead of kube_pods_subnet)
* Documentation for calico_pool_cidr (and calico_advertise_cluster_ips which has been forgotten...)
* Upgrade kubernetes to v1.13.0
* Remove all precense of scheduler.alpha.kubernetes.io/critical-pod in templates
* Fix cert dir
* Use kubespray v2.8 as baseline for gitlab
add prometheus annotations to calico-node if
calico_felix_prometheusmetricsenabled is enabled.
This will allow a kubernetes_sd to automaticly find the pods and start
scraping.
* Adds support for Multus (multiple interfaces) CNI plugin
Multus is a latin word for "Multi". As the name suggests, it acts as a
Multi plugin in Kubernetes and provides multiple network interface
support in a pod. Multus uses the concept of invoking delegates by
grouping multiple plugins into delegates and invoking them in the
sequential order of the CNI configuration file provided in json format.
* Change CNI version (0.1.0->0.3.1) of Contiv to be compatible with Multus
* warning on meta flush_handlers
* avoid rm
* avoid "Module remote_tmp /root/.ansible/tmp did not exist and was created with a mode of 0700, this may cause issues when running as another user. To avoid this, create the remote_tmp dir with the correct permissions manually" warning on subsequent tasks using blockinfile
* is match
* failed
* version_compare
* succeeded
* skipped
* success
* version_compare becomes version since ansible 2.5
* ansible minimal version updated in doc and spec
* last version_compare
* [jjo] add kube-router support
Fixescloudnativelabs/kube-router#147.
* add kube-router as another network_plugin choice
* support most used kube-router flags via
`kube_router_foo` vars as other plugins
* implement replacing kube-proxy (--run-service-proxy=true) via
`kube_proxy_mode: none`, verified in a _non kubeadm_enabled_
install, should also work for recent kubeadm releases via
`skipKubeProxyInstall: true` config
* [jjo] address PR#3339 review from @woopstar
* add busybox image used by kube-router to downloads
* fix busybox download groups key
* rework kubeadm_enabled + kube_router_run_service_proxy
- verify it working ok w/the kubeadm_enabled and
kube_router_run_service_proxy true or false
- introduce `kube_proxy_remove` fact, to decouple logic
from kube_proxy_mode (which affects kubeadm configmap
settings, thus no-good to ab-use it to 'none')
* improve kube-router.md re: kubeadm_enabled and kube_router_run_service_proxy
* address @woopstar latest review
* add inventory/sample/group_vars/k8s-cluster/k8s-net-kube-router.yml
* fix kube_router_run_service_proxy conditional for kube-proxy removal
* fix kube_proxy_remove fact (w/ |bool), add some needed kube-proxy tags on my and existing changes
* update kube-router tolerations for 1.12 compatibility
* add PriorityClass to kube-router DaemonSet
Before, Nodes tainted with NoExecute policy did not have calico/weave Pod.
Network pod should run on all nodes whatever happens on a specific node.
Also always set the Pods to be critical.
Also remove deprecated scheduler.alpha.kubernetes.io/tolerations annotations.
* Changes to assign pod priority to kube components.
* Removed the boolean flag pod_priority_assignment
* Created new priorityclass k8s-cluster-critical
* Created new priorityclass k8s-cluster-critical
* Fixed the trailing spaces
* Fixed the trailing spaces
* Added kube version check while creating Priority Class k8s-cluster-critical
* Moved k8s-cluster-critical.yml
* Moved k8s-cluster-critical.yml to kube_config_dir
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
remove empty when line
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
force kubeadm upgrade due to failure without --force flag
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
added nodeSelector to have compatibility with hybrid cluster with win nodes, also fix for download with missing container type
fixes in syntax and LF for newline in files
fix on yamllint check
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
some cleanup for innecesary lines
remove conditions for nodeselector
* calico upgrade to v3
* update calico_rr version
* add missing file
* change contents of main.yml as it was left old version
* enable network policy by default
* remove unneeded task
* Fix kubelet calico settings
* fix when statement
* switch back to node-kubeconfig.yaml
Flannel use interface for inter-host communication setted on --iface options
Defaults to the interface for the default route on the machine.
flannel config set via daemonset, and flannel config on all nodes is the same.
But different nodes can have different interface names for the inter-host communication network
The option --iface-regex allows the flannel to find the interface on which the address is set from the inter-host communication network
* Set filemode to 0640
weave-net.yml file is readable by all users on the host. It however contains the weave_password to encrypt all pod communication. It should only be readable by root.
* Set mode 0640 on users_file with basic auth
* Added cilium support
* Fix typo in debian test config
* Remove empty lines
* Changed cilium version from <latest> to <v1.0.0-rc3>
* Add missing changes for cilium
* Add cilium to CI pipeline
* Fix wrong file name
* Check kernel version for cilium
* fixed ci error
* fixed cilium-ds.j2 template
* added waiting for cilium pods to run
* Fixed missing EOF
* Fixed trailing spaces
* Fixed trailing spaces
* Fixed trailing spaces
* Fixed too many blank lines
* Updated tolerations,annotations in cilium DS template
* Set cilium_version to iptables-1.9 to see if bug is fixed in CI
* Update cilium image tag to v1.0.0-rc4
* Update Cilium test case CI vars filenames
* Add optional prometheus flag, adjust initial readiness delay
* Update README.md with cilium info
* allow installs to not have hostname overriden with fqdn from inventory
* calico-config no longer requires local as and will default to global
* when cloudprovider is not defined, use the inventory_hostname for cni-calico
* allow reset to not restart network (buggy nodes die with this cmd)
* default kube_override_hostname to inventory_hostname instead of ansible_hostname
Use a etcd-initer init container to generate etcd args, it determines
etcd name by comparing its ip and etcd cluster ips. This way will
make etcd configuration independent to the ansible templating so
that could be easier on adding master nodes.
Putting contiv etcd and etcd-proxy into the same daemonset and manage
the difference by a env file is not good for scaling (adding nodes).
This commit split them into two daemonsets so that when adding nodes,
k8s could automatically starting a etcd-proxy on new nodes without need
to run related play that putting env file.
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Refactor downloads to use download role directly
Also disable fact delegation so download delegate works acros OSes.
* clean up bools and ansible_os_family conditionals
The value cannot be determined properly via local facts, so
checking k8s api is the most reliable way to look up what hostname
is used when using a cloudprovider.
* kubeadm support
* move k8s master to a subtask
* disable k8s secrets when using kubeadm
* fix etcd cert serial var
* move simple auth users to master role
* make a kubeadm-specific env file for kubelet
* add non-ha CI job
* change ci boolean vars to json format
* fixup
* Update create-gce.yml
* Update create-gce.yml
* Update create-gce.yml
This sets br_netfilter and net.bridge.bridge-nf-call-iptables sysctl from a single play before kube-proxy is first ran instead of from the flannel and weave network_plugin roles after kube-proxy is started
* Updates Controller Manager/Kubelet with Flannel's required configuration for CNI
* Removes old Flannel installation
* Install CNI enabled Flannel DaemonSet/ConfigMap/CNI bins and config (with portmap plugin) on host
* Uses RBAC if enabled
* Fixed an issue that could occur if br_netfilter is not a module and net.bridge.bridge-nf-call-iptables sysctl was not set
* Adding yaml linter to ci check
* Minor linting fixes from yamllint
* Changing CI to install python pkgs from requirements.txt
- adding in a secondary requirements.txt for tests
- moving yamllint to tests requirements
Before restarting docker, instruct it to kill running
containers when it restarts.
Needs a second docker restart after we restore the original
behavior, otherwise the next time docker is restarted by
an operator, it will unexpectedly bring down all running
containers.
In atomic, containers are left running when docker is restarted.
When docker is restarted after the flannel config is put in place,
the docker0 interface isn't re-IPed because docker sees the running
containers and won't update the previous config.
This patch kills all the running containers after docker is stopped.
We can't simply `docker stop` the running containers, as they respawn
before we've got a chance to stop the docker daemon, so we need to
use runc to do this after dockerd is stopped.
By default Calico CNI does not create any network access policies
or profiles if 'policy' is enabled in CNI config. And without any
policies/profiles network access to/from PODs is blocked.
K8s related policies are created by calico-policy-controller in
such case. So we need to start it as soon as possible, before any
real workloads.
This patch also fixes kube-api port in calico-policy-controller
yaml template.
Closes#1132
By default Calico blocks traffic from endpoints
to the host itself by using an iptables DROP
action. It could lead to a situation when service
has one alive endpoint, but pods which run on
the same node can not access it. Changed the action
to RETURN.
* Leave all.yml to keep only optional vars
* Store groups' specific vars by existing group names
* Fix optional vars casted as mandatory (add default())
* Fix missing defaults for an optional IP var
* Relink group_vars for terraform to reflect changes
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
Migrate older inline= syntax to pure yml syntax for module args as to be consistant with most of the rest of the tasks
Cleanup some spacing in various files
Rename some files named yaml to yml for consistancy
Ansible playbook fails when tags are limited to "facts,etcd" or to
"facts". This patch allows to run ansible-playbook to gather facts only
that don't require calico/flannel/weave components to be verified. This
allows to run ansible with 'facts,bootstrap-os' or just 'facts' to
gether facts that don't require specific components.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
"shell" step doesn't support check mode, which currently leads to failures,
when Ansible is being run in check mode (because Ansible doesn't run command,
assuming that command might have effect, and no "rc" or "output" is registered).
Setting "check_mode: no" allows to run those "shell" commands in check mode
(which is safe, because those shell commands doesn't have side effects).
Daemonsets cannot be simply upgraded through a single API call,
regardless of any kubectl documentation. The resource must be
purged and then recreated in order to make any changes.
- Set recommended CPU settings
- Cleans up upgrade to weave 1.82. The original WeaveWorks
daemonset definition uses weave-net name.
- Limit DS creation to master
- Combined 2 tasks into one with better condition
For consistancy with kubernetes services we should use the same
hostname for nodes, which is 'ansible_hostname'.
Also fixing missed 'kube-node' in templates, Calico is installed
on 'k8s-cluster' roles, not only 'kube-node'.
Calico-rr is broken for deployments with separate k8s-master and
k8s-node roles. In order to fix it we should peer k8s-cluster
nodes with calico-rr, not just k8s-node. The same for peering
with routers.
Closes#925
* Drop linux capabilities for unprivileged containerized
worlkoads Kargo configures for deployments.
* Configure required securityContext/user/group/groups for kube
components' static manifests, etcd, calico-rr and k8s apps,
like dnsmasq daemonset.
* Rework cloud-init (etcd) users creation for CoreOS.
* Fix nologin paths, adjust defaults for addusers role and ensure
supplementary groups membership added for users.
* Add netplug user for network plugins (yet unused by privileged
networking containers though).
* Grant the kube and netplug users read access for etcd certs via
the etcd certs group.
* Grant group read access to kube certs via the kube cert group.
* Remove priveleged mode for calico-rr and run it under its uid/gid
and supplementary etcd_cert group.
* Adjust docs.
* Align cpu/memory limits and dropped caps with added rkt support
for control plane.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
"etcd_node_cert_data" variable is undefinded for "calico-rr" role.
This patch adds "calico-rr" nodes to task where "etcd_node_cert_data"
variable is registered.
* Add restart for weave service unit
* Reuse docker_bin_dir everythere
* Limit systemd managed docker containers by CPU/RAM. Do not configure native
systemd limits due to the lack of consensus in the kernel community
requires out-of-tree kernel patches.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Add BGP route reflectors support in order to optimize BGP topology
for deployments with Calico network plugin.
Also bump version of calico/ctl for some bug fixes.
Also place in global vars and do not repeat the kube_*_config_dir
and kube_namespace vars for better code maintainability and UX.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
In order to enable offline/intranet installation cases:
* Move DNS/resolvconf configuration to preinstall role. Remove
skip_dnsmasq_k8s var as not needed anymore.
* Preconfigure DNS stack early, which may be the case when downloading
artifacts from intranet repositories. Do not configure
K8s DNS resolvers for hosts /etc/resolv.conf yet early (as they may be
not existing).
* Reconfigure K8s DNS resolvers for hosts only after kubedns/dnsmasq
was set up and before K8s apps to be created.
* Move docker install task to early stage as well and unbind it from the
etcd role's specific install path. Fix external flannel dependency on
docker role handlers. Also fix the docker restart handlers' steps
ordering to match the expected sequence (the socket then the service).
* Add default resolver fact, which is
the cloud provider specific and remove hardcoded GCE resolver.
* Reduce default ndots for hosts /etc/resolv.conf to 2. Multiple search
domains combined with high ndots values lead to poor performance of
DNS stack and make ansible workers to fail very often with the
"Timeout (12s) waiting for privilege escalation prompt:" error.
* Update docs.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
When running legacy calicoctl we do not specify calico hostname in
calico-node container thus we should not specify it in CNI config.
Also move 'legacy_calicoctl' set_fact task to the top.
In new `calicoctl` version nodes peering with routers is broken.
We need to use predictable node names for calico-node and the
same names in calico `bgpPeer` resources and CNI.
According to http://kubernetes.io/docs/user-guide/images/ :
By default, the kubelet will try to pull each image from the
specified registry. However, if the imagePullPolicy property
of the container is set to IfNotPresent or Never, then a local\
image is used (preferentially or exclusively, respectively).
Use IfNotPresent value to allow images prepared by the download
role dependencies to be effectively used by kubelet without pull
errors resulting apps to stay blocked in PullBackOff/Error state
even when there are images on the localhost exist.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Pre download all required container images as roles' deps.
Drop unused flannel-server-helper images pre download.
Improve pods creation post-install test pre downloaded busybox.
Improve logs collection script with kubectl describe, fix sudo/etcd/weave
commands.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Florian Ruynat
Flavien
Sergey
Wang Zhen
Qasim Sarfraz
Pasquale Toscano
Maxime Guyot
Ryler Hockenbury
Chris
Alexander Kross
Anshul Sharma
Petr Enkov
Petr Enkov
Mateus Caruccio
bozzo
hfinucane
Christopher Randles
Fredrik Lönnegren
Arthur Outhenin-Chalandre
Chad Swenson
Sylvain Chateau
lcooper40
Matthew Mosesohn
Etienne Champetier
Aaron Crickenberger
Jacopo Secchiero
Quentin Gliech
Junho Suh
Hugo Blom
陈谭军
Erwan Miran
Xiaodu
Holger Frydrych
Oilbeater
Aleksey Kasatkin
nico-netminded
Andreas Krüger
Sergey Kolekonov
刘旭
jlacoline
Julian Tabel
okamototk
Simon Lelievre
Tony Fouchard
Simon Lelievre
Alberto Murillo
Ivan Kukharchuk
MarkusTeufelberger
grialeyur
MarkusTeufelberger
andreyshestakov
Neven Miculinic
Robert Neumann
ml
chadswilson
Anupam Basak
hikoz
Wong Hoi Sing Edison
Danny Kulchinsky
Sorin Sbarnea
wangxf
Douglas Hellinger
ihard
Zohar Mamedov
Rong Zhang
Joost Cassee
Oleg Dolya
Johnny Halfmoon
Mark Eisenblätter
Egor
Louis Woods
Robert Liotta
JuanJo Ciarlante
Luke Seelenbinder
Cédric de Saint Martin
arzarif
Kuldip Madnani
Rui Cao
Kevin Schuck
k8s-ci-robot
Alex Yakovenko
Erwan Miran
Matthew Mosesohn
rabi
mlushpenko
Luis Nunez
Pablo Estigarribia
Antoine Legrand
Fernando Crespo Grávalos
Aivars Sterns
Zinin D.A
elementyang
Daniel Mohr
Brad Beam
Andreas Krüger
Anton Fayzrahmanov
Erik Stidham
melkosoft
rong.zhang
melkosoft
Ryan Zenker
Cornelius Keller
Steve Mitchell
Wei Tie
unclejack
Simon Li
Spencer Smith
Hyunsun Moon
Kevin Lefevre
Brad Beam
Matthew Mosesohn
Yuki KIRII
Vijay Katam
timtoum
AtzeDeVries
Kevin Jing Qiu
Justin Hunthrop
Josh Lothian
Sergii Golovatiuk
Aleksandr Didenko
Artem Panchenko
Bogdan Dobrelya
Ivan Shvedunov
Andrew Greenwood
Vladimir Rutsky
Bogdan Dobrelya
Genti Topija
Spencer Smith
Smaine Kahlouch
Alexander Block
Sergey Vasilenko