* Fix HA docs API access endpoints explained
Follow-up commit 81347298a3
and fix the endpoint value provided in HA docs.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
* Clarify internal LB with external LB use case
* Clarify how to use both internal and external, non-cluster aware and
not managed with Kubespray, LB solutions.
* Clarify the requirements, like TLS/SSL termination, for such an external LB.
Unlike to the 'cluster-aware' external LB config, endpoints' security must be
managed by that non-cluster aware external LB.
* Note that masters always contact their local apiservers via https://bip:sp.
It's highly unlikely to go down and it reduces latency that might be
introduced when going host->lb->host. Only computes go that path.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
* Add a note for supplementary_addresses_in_ssl_keys
Explain how to benefit from supplementary_addresses_in_ssl_keys
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
Auto configure API access endpoint with a custom bind IP, if provided.
Fix HA docs' http URLs are https in fact, clarify the insecure vs secure
API access modes as well.
Closes: #issues/2051
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
* Allow setting --bind-address for apiserver hyperkube
This is required if you wish to configure a loadbalancer (e.g haproxy)
running on the master nodes without choosing a different port for the
vip from that used by the API - in this case you need the API to bind to
a specific interface, then haproxy can bind the same port on the VIP:
root@overcloud-controller-0 ~]# netstat -taupen | grep 6443
tcp 0 0 192.168.24.6:6443 0.0.0.0:* LISTEN 0 680613 134504/haproxy
tcp 0 0 192.168.24.16:6443 0.0.0.0:* LISTEN 0 653329 131423/hyperkube
tcp 0 0 192.168.24.16:6443 192.168.24.16:58404 ESTABLISHED 0 652991 131423/hyperkube
tcp 0 0 192.168.24.16:58404 192.168.24.16:6443 ESTABLISHED 0 652986 131423/hyperkube
This can be achieved e.g via:
kube_apiserver_bind_address: 192.168.24.16
* Address code review feedback
* Update kube-apiserver.manifest.j2
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Defaults for apiserver_loadbalancer_domain_name
When loadbalancer_apiserver is defined, use the
apiserver_loadbalancer_domain_name with a given default value.
Fix unconsistencies for checking if apiserver_loadbalancer_domain_name
is defined AND using it with a default value provided at once.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
* Define defaults for LB modes in common defaults
Adjust the defaults for apiserver_loadbalancer_domain_name and
loadbalancer_apiserver_localhost to come from a single source, which is
kubespray-defaults. Removes some confusion and simplefies the code.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
* Change deprecated vagrant ansible flag 'sudo' to 'become'
* Emphasize, that the name of the pip_pyton_modules is only considered in coreos
* Remove useless unused variable
* Fix warning when jinja2 template-delimiters used in when statement
There is no need for jinja2 template-delimiters like {{ }} or {% %}
any more. They can just be omitted as described in https://github.com/ansible/ansible/issues/22397
* Fix broken link in getting-started guide
In 1.8, the Node authorization mode should be listed first to
allow kubelet to access secrets. This seems to only impact
environments with cloudprovider enabled.
* Rename dns_server to dnsmasq_dns_server so that it includes role prefix
as the var name is generic and conflicts when integrating with existing ansible automation.
* Enable selinux state to be configurable with new var preinstall_selinux_state
This follows pull request #1677, adding the cgroup-driver
autodetection also for kubeadm way of deploying.
Info about this and the possibility to override is added to the docs.
New files: /etc/kubernetes/admin.conf
/root/.kube/config
$GITDIR/artifacts/{kubectl,admin.conf}
Optional method to download kubectl and admin.conf if
kubeconfig_lcoalhost is set to true (default false)
* Added update CA trust step for etcd and kube/secrets roles
* Added load_balancer_domain_name to certificate alt names if defined. Reset CA's in RedHat os.
* Rename kube-cluster-ca.crt to vault-ca.crt, we need separated CA`s for vault, etcd and kube.
* Vault role refactoring, remove optional cert vault auth because not not used and worked. Create separate CA`s fro vault and etcd.
* Fixed different certificates set for vault cert_managment
* Update doc/vault.md
* Fixed condition create vault CA, wrong group
* Fixed missing etcd_cert_path mount for rkt deployment type. Distribute vault roles for all vault hosts
* Removed wrong when condition in create etcd role vault tasks.
* Updates Controller Manager/Kubelet with Flannel's required configuration for CNI
* Removes old Flannel installation
* Install CNI enabled Flannel DaemonSet/ConfigMap/CNI bins and config (with portmap plugin) on host
* Uses RBAC if enabled
* Fixed an issue that could occur if br_netfilter is not a module and net.bridge.bridge-nf-call-iptables sysctl was not set
$IPS only expands to the first ip address in the array:
justin@box:~$ declare -a IPS=(10.10.1.3 10.10.1.4 10.10.1.5)
justin@box:~$ echo $IPS
10.10.1.3
justin@box:~$ echo ${IPS[@]}
10.10.1.3 10.10.1.4 10.10.1.5
Clarify that the `kube_version` environment variable is needed for the CLI "graceful upgrade". Also add and example to check that the upgrade was successful.
Non-brekable space is 0xc2 0xa0 byte sequence in UTF-8.
To find one:
$ git grep -I -P '\xc2\xa0'
To replace with regular space:
$ git grep -l -I -P '\xc2\xa0' | xargs sed -i 's/\xc2\xa0/ /g'
This commit doesn't include changes that will overlap with commit f1c59a91a1.
The AWS IAM profiles and policies required to run Kargo on AWS
are no longer hosted in the kubernetes main repo since kube-up got
deprecated. Hence we have to move the files into the kargo repository.
Updates based on feedback
Simplify checks for file exists
remove invalid char
Review feedback. Use regular systemd file.
Add template for docker systemd atomic
By default Calico blocks traffic from endpoints
to the host itself by using an iptables DROP
action. It could lead to a situation when service
has one alive endpoint, but pods which run on
the same node can not access it. Changed the action
to RETURN.
Operator can specify any port for kube-api (6443 default) This helps in
case where some pods such as Ingress require 443 exclusively.
Closes: 820
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
* Leave all.yml to keep only optional vars
* Store groups' specific vars by existing group names
* Fix optional vars casted as mandatory (add default())
* Fix missing defaults for an optional IP var
* Relink group_vars for terraform to reflect changes
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
New deploy modes: scale, ha-scale, separate-scale
Creates 200 fake hosts for deployment with fake hostvars.
Useful for testing certificate generation and propagation to other
master nodes.
Updated test cases descriptions.
Based on #718 introduced by rsmitty.
Includes all roles and all options to support deployment of
new hosts in case they were added to inventory.
Main difference here is that master role is evaluated first
so that master components get upgraded first.
Fixes#694
- Exclude kubelet CPU/RAM (kube-reserved) from cgroup. It decreases a
chance of overcommitment
- Add a possibility to modify Kubelet node-status-update-frequency
- Add a posibility to configure node-monitor-grace-period,
node-monitor-period, pod-eviction-timeout for Kubernetes controller
manager
- Add Kubernetes Relaibility Documentation with recomendations for
various scenarios.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
kubelet lost the ability to load kernel modules. This
puts that back by adding the lib/modules mount to kubelet.
The new variable kubelet_load_modules can be set to true
to enable this item. It is OFF by default.
Netchecker is rewritten in Go lang with some new args instead of
env variables. Also netchecker-server no longer requires kubectl
container. Updating playbooks accordingly.
* Drop linux capabilities for unprivileged containerized
worlkoads Kargo configures for deployments.
* Configure required securityContext/user/group/groups for kube
components' static manifests, etcd, calico-rr and k8s apps,
like dnsmasq daemonset.
* Rework cloud-init (etcd) users creation for CoreOS.
* Fix nologin paths, adjust defaults for addusers role and ensure
supplementary groups membership added for users.
* Add netplug user for network plugins (yet unused by privileged
networking containers though).
* Grant the kube and netplug users read access for etcd certs via
the etcd certs group.
* Grant group read access to kube certs via the kube cert group.
* Remove priveleged mode for calico-rr and run it under its uid/gid
and supplementary etcd_cert group.
* Adjust docs.
* Align cpu/memory limits and dropped caps with added rkt support
for control plane.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
Also adds calico-rr group if there are standalone etcd nodes.
Now if there are 50 or more nodes, 3 etcd nodes will be standalone.
If there are 200 or more nodes, 2 kube-masters will be standalone.
If thresholds are exceeded, kube-node group cannot add nodes that
belong to etcd or kube-master groups (according to above statements).
Aivars Sterns
RongZhang
zhengchuan hu
Chad Swenson
Wong Hoi Sing Edison
David Miller
Merouane Atig
Spencer Smith
Julian Hübenthal
Miouge1
Matthew Mosesohn
Bogdan Dobrelya
Aaron Crickenberger
Brad Beam
Steven Hardy
unclejack
abelgana
Amit Kumar Jaiswal
Günther Grill
Fernando Ripoll
neith00
Marc Zahn
Vijay Katam
Maxim Krasilnikov
shiftky
Junaid Ali
Jiri Stransky
Matthew Mosesohn
Hassan Zamani
Joseph Heck
timtoum
jwfang
John Ko
nico
Raj Perera
Spencer Smith
Anton Nerozya
vgkowski
TAKAHASHI Yuto
Abdelsalam Abbas
Kevin Jing Qiu
Charles Farquhar
Justin
Justin Downing
Antoine Legrand
Vladimir Rutsky
William Martin Stewart
Vincent Schwarzer
Bogdan Dobrelya
Artem Panchenko
Sergii Golovatiuk
Kopylov German
Hung Nguyen Viet
Greg Althaus
Josh Conant
Aleksandr Didenko
Alexander Block