#jinja2: trim_blocks: True, lstrip_blocks: True
# yamllint disable-file
---
# Create layer3 configuration
{% if metallb_config.layer3.communities is defined %}
{% for community_name, community in metallb_config.layer3.communities.items() %}
---
apiVersion: metallb.io/v1beta1
kind: Community
metadata:
  name: "{{ community_name }}"
  namespace: "{{ metallb_namespace }}"
spec:
  communities:
  - name: "{{ community_name }}"
    value: "{{ community }}"
{% endfor %}
{% endif %}
---
apiVersion: metallb.io/v1beta1
kind: Community
metadata:
  name: well-known
  namespace: "{{ metallb_namespace }}"
spec:
  communities:
  - name: no-export
    value: 65535:65281
  - name: no-advertise
    value: 65535:65282
  - name: local-as
    value: 65535:65283
  - name: nopeer
    value: 65535:65284

# BGPAdvertisement is used to advertise address pools to the BGP peer. Specific pools can be listed to be advertised.
# Local BGP Advertisement specifies that the IP specified in the address pool will be used as remote source address for traffic entering your cluster from the remote peer.
# When using this option, be sure to use a subnet and routable IP for your address pool.
# This is good: 10.0.0.10/24. This is also good: 10.0.0.129/25. This is bad: 10.0.0.0/24. This is also bad: 10.0.0.128/25.
# In this example, 10.0.0.10 will be used as the remote source address.
# This is also bad: 10.0.0.10-10.0.0.25. Remember: you are working with aggregationLength, which specifies a subnet, not an IP range!
# The no-advertise community is set on the local advertisement to prevent this route from being published to the BGP peer.
# Your aggregationLength ideally is the same size as your address pool.

{% for peer_name, peer in metallb_config.layer3.metallb_peers.items() %}

{% if peer.aggregation_length is defined and peer.aggregation_length <= 30 %}

---
apiVersion: metallb.io/v1beta1
kind: BGPAdvertisement
metadata:
  name: "{{ peer_name }}-local"
  namespace: "{{ metallb_namespace }}"
spec:
  aggregationLength: 32
  aggregationLengthV6: 128
  communities:
  - no-advertise
  localpref: "{{ peer.localpref | default("100") }}"
  ipAddressPools:
  {% for address_pool in peer.address_pool %}
  - "{{ address_pool }}"
  {% endfor %}
{% endif %}

# External BGP Advertisement. The IP range specied in the address pool is advertised to the BGP peer.
---
apiVersion: metallb.io/v1beta1
kind: BGPAdvertisement
metadata:
  name: "{{ peer_name }}-external"
  namespace: "{{ metallb_namespace }}"
spec:
  {% if peer.aggregation_length is defined and peer.aggregation_length <= 30 %}
  aggregationLength: {{ peer.aggregation_length }}
  {% endif %}
  ipAddressPools:
  {% for address_pool in peer.address_pool %}
  - "{{ address_pool }}"
  {% endfor %}
  {% if peer.communities is defined %}
    {% for community in peer.communities %}
  communities:
  - "{{ community }}"
    {% endfor %}
  {% endif %}


# Configuration for the BGP peer.
---
apiVersion: metallb.io/v1beta2
kind: BGPPeer
metadata:
  name: "{{ peer_name }}"
  namespace: "{{ metallb_namespace }}"
spec:
  myASN: {{ peer.my_asn }}
  peerASN: {{ peer.peer_asn }}
  peerAddress: {{ peer.peer_address }}
  {% if peer.peer_port is defined %}
  peerPort: {{ peer.peer_port }}
  {% else %}
  peerPort: {{ metallb_config.layer3.defaults.peer_port }}
  {% endif -%}

  {% if peer.password is defined %}
  password: "{{ peer.password }}"
  {% endif -%}

  {% if peer.router_id is defined %}
  routerID: "{{ peer.router_id }}"
  {% endif -%}

  {% if peer.hold_time is defined %}
  holdTime: {{ peer.hold_time }}
  {% elif metallb_config.layer3.defaults.hold_time is defined %}
  holdTime: {{ metallb_config.layer3.defaults.hold_time }}
  {% endif -%}

  {% if peer.multihop is defined %}
  ebgpMultiHop: {{ peer.multihop }}
  {% endif -%}

{% endfor %}