119 lines
3.6 KiB
YAML
119 lines
3.6 KiB
YAML
---
|
|
kube_ovn_db_cpu_request: 500m
|
|
kube_ovn_db_memory_request: 200Mi
|
|
kube_ovn_db_cpu_limit: 3000m
|
|
kube_ovn_db_memory_limit: 3000Mi
|
|
kube_ovn_node_cpu_request: 200m
|
|
kube_ovn_node_memory_request: 200Mi
|
|
kube_ovn_node_cpu_limit: 1000m
|
|
kube_ovn_node_memory_limit: 800Mi
|
|
kube_ovn_cni_server_cpu_request: 200m
|
|
kube_ovn_cni_server_memory_request: 200Mi
|
|
kube_ovn_cni_server_cpu_limit: 1000m
|
|
kube_ovn_cni_server_memory_limit: 1Gi
|
|
kube_ovn_controller_cpu_request: 200m
|
|
kube_ovn_controller_memory_request: 200Mi
|
|
kube_ovn_controller_cpu_limit: 1000m
|
|
kube_ovn_controller_memory_limit: 1Gi
|
|
kube_ovn_pinger_cpu_request: 100m
|
|
kube_ovn_pinger_memory_request: 200Mi
|
|
kube_ovn_pinger_cpu_limit: 200m
|
|
kube_ovn_pinger_memory_limit: 400Mi
|
|
kube_ovn_monitor_memory_request: 200Mi
|
|
kube_ovn_monitor_cpu_request: 200m
|
|
kube_ovn_monitor_memory_limit: 200Mi
|
|
kube_ovn_monitor_cpu_limit: 200m
|
|
kube_ovn_dpdk_node_cpu_request: 1000m
|
|
kube_ovn_dpdk_node_memory_request: 2Gi
|
|
kube_ovn_dpdk_node_cpu_limit: 1000m
|
|
kube_ovn_dpdk_node_memory_limit: 2Gi
|
|
|
|
kube_ovn_central_hosts: "{{ groups['kube_control_plane'] }}"
|
|
kube_ovn_central_replics: "{{ kube_ovn_central_hosts | length }}"
|
|
kube_ovn_controller_replics: "{{ kube_ovn_central_hosts | length }}"
|
|
kube_ovn_central_ips: |-
|
|
{% for item in kube_ovn_central_hosts -%}
|
|
{{ hostvars[item]['ip'] | default(fallback_ips[item]) }}{% if not loop.last %},{% endif %}
|
|
{%- endfor %}
|
|
|
|
kube_ovn_ic_enable: false
|
|
kube_ovn_ic_autoroute: true
|
|
kube_ovn_ic_dbhost: "127.0.0.1"
|
|
kube_ovn_ic_zone: "kubernetes"
|
|
|
|
# geneve or vlan
|
|
kube_ovn_network_type: geneve
|
|
|
|
# geneve, vxlan or stt. ATTENTION: some networkpolicy cannot take effect when using vxlan and stt need custom compile ovs kernel module
|
|
kube_ovn_tunnel_type: geneve
|
|
|
|
## The nic to support container network can be a nic name or a group of regex separated by comma e.g: 'enp6s0f0,eth.*', if empty will use the nic that the default route use.
|
|
# kube_ovn_iface: eth1
|
|
## The MTU used by pod iface in overlay networks (default iface MTU - 100)
|
|
# kube_ovn_mtu: 1333
|
|
|
|
## Enable hw-offload, disable traffic mirror and set the iface to the physical port. Make sure that there is an IP address bind to the physical port.
|
|
kube_ovn_hw_offload: false
|
|
# traffic mirror
|
|
kube_ovn_traffic_mirror: false
|
|
|
|
# kube_ovn_pool_cidr_ipv6: fd85:ee78:d8a6:8607::1:0000/112
|
|
# kube_ovn_default_interface_name: eth0
|
|
|
|
kube_ovn_external_address: 8.8.8.8
|
|
kube_ovn_external_address_ipv6: 2400:3200::1
|
|
kube_ovn_external_dns: alauda.cn
|
|
|
|
# kube_ovn_default_gateway: 10.233.64.1,fd85:ee78:d8a6:8607::1:0
|
|
kube_ovn_default_gateway_check: true
|
|
kube_ovn_default_logical_gateway: false
|
|
|
|
# u2o_interconnection
|
|
kube_ovn_u2o_interconnection: false
|
|
|
|
# kube_ovn_default_exclude_ips: 10.16.0.1
|
|
kube_ovn_node_switch_cidr: 100.64.0.0/16
|
|
kube_ovn_node_switch_cidr_ipv6: fd00:100:64::/64
|
|
|
|
## vlan config, set default interface name and vlan id
|
|
# kube_ovn_default_interface_name: eth0
|
|
kube_ovn_default_vlan_id: 100
|
|
kube_ovn_vlan_name: product
|
|
|
|
## pod nic type, support: veth-pair or internal-port
|
|
kube_ovn_pod_nic_type: veth_pair
|
|
|
|
## Enable load balancer
|
|
kube_ovn_enable_lb: true
|
|
|
|
## Enable network policy support
|
|
kube_ovn_enable_np: true
|
|
|
|
## Enable external vpc support
|
|
kube_ovn_enable_external_vpc: true
|
|
|
|
## Enable checksum
|
|
kube_ovn_encap_checksum: true
|
|
|
|
## enable ssl
|
|
kube_ovn_enable_ssl: false
|
|
|
|
## dpdk
|
|
kube_ovn_dpdk_enabled: false
|
|
kube_ovn_dpdk_tunnel_iface: br-phy
|
|
|
|
## bind local ip
|
|
kube_ovn_bind_local_ip_enabled: true
|
|
|
|
## eip snat
|
|
kube_ovn_eip_snat_enabled: true
|
|
|
|
# ls dnat mod dl dst
|
|
kube_ovn_ls_dnat_mod_dl_dst: true
|
|
|
|
## keep vm ip
|
|
kube_ovn_keep_vm_ip: true
|
|
|
|
## cni config priority, default: 01
|
|
kube_ovn_cni_config_priority: '01'
|