58 lines
1.7 KiB
YAML
58 lines
1.7 KiB
YAML
---
|
|
|
|
# geneve or vlan
|
|
kube_ovn_network_type: geneve
|
|
|
|
# geneve, vxlan or stt. ATTENTION: some networkpolicy cannot take effect when using vxlan and stt need custom compile ovs kernel module
|
|
kube_ovn_tunnel_type: geneve
|
|
|
|
## The nic to support container network can be a nic name or a group of regex separated by comma e.g: 'enp6s0f0,eth.*', if empty will use the nic that the default route use.
|
|
# kube_ovn_iface: eth1
|
|
## The MTU used by pod iface in overlay networks (default iface MTU - 100)
|
|
# kube_ovn_mtu: 1333
|
|
|
|
## Enable hw-offload, disable traffic mirror and set the iface to the physical port. Make sure that there is an IP address bind to the physical port.
|
|
kube_ovn_hw_offload: false
|
|
# traffic mirror
|
|
kube_ovn_traffic_mirror: false
|
|
|
|
# kube_ovn_pool_cidr_ipv6: fd85:ee78:d8a6:8607::1:0000/112
|
|
# kube_ovn_default_interface_name: eth0
|
|
|
|
kube_ovn_external_address: 8.8.8.8
|
|
kube_ovn_external_address_ipv6: 2400:3200::1
|
|
kube_ovn_external_dns: alauda.cn
|
|
|
|
# kube_ovn_default_gateway: 10.233.64.1,fd85:ee78:d8a6:8607::1:0
|
|
kube_ovn_default_gateway_check: true
|
|
kube_ovn_default_logical_gateway: false
|
|
# kube_ovn_default_exclude_ips: 10.16.0.1
|
|
kube_ovn_node_switch_cidr: 100.64.0.0/16
|
|
kube_ovn_node_switch_cidr_ipv6: fd00:100:64::/64
|
|
|
|
## vlan config, set default interface name and vlan id
|
|
# kube_ovn_default_interface_name: eth0
|
|
kube_ovn_default_vlan_id: 100
|
|
kube_ovn_vlan_name: product
|
|
|
|
## pod nic type, support: veth-pair or internal-port
|
|
kube_ovn_pod_nic_type: veth_pair
|
|
|
|
## Enable load balancer
|
|
kube_ovn_enable_lb: true
|
|
|
|
## Enable network policy support
|
|
kube_ovn_enable_np: true
|
|
|
|
## Enable external vpc support
|
|
kube_ovn_enable_external_vpc: true
|
|
|
|
## Enable checksum
|
|
kube_ovn_encap_checksum: true
|
|
|
|
## enable ssl
|
|
kube_ovn_enable_ssl: false
|
|
|
|
## dpdk
|
|
kube_ovn_dpdk_enabled: false
|