torch-mlir/lib/RefBackend/TensorToMemref/LowerConstantTensorsToMemre...

115 lines
4.0 KiB
C++
Raw Normal View History

Totally rework RefE2E tensor to memref flow. (#42) This now gets the overall "RefE2E" compilation stack to a point that I'm fairly happy with. We simplify it by mostly embracing the "descriptor" view of the world. The overall flow is best understood by reading through the createE2ELoweringPipeline function in lib/E2E/E2E.cpp That function creates a pass pipeline that lowers from "TCF" (which is ~numpy level of abstraction) down to LLVM IR. A brief high-level summary of what happens there: 1. TCF to TCP conversion. This involves reifying error handling in the form of shape constraints. See test/Conversion/TCFToTCP/basic.mlir 2. Lowering shape constraints. This converts shape constraints into eager error-handling code. See test/E2E/lower-shape-constraints.mlir This pass will soon go upstream. Because this lowers to std.assert, some later passes like LowerToNpcomprtABI and LowerToLLVM are updated to properly plumb this through e2e. See test/npcomp-run-mlir/invalid-broadcast.mlir for an execution test that properly aborts in case of an error. 3. Lowering tensors to memrefs. This is done via a series of passes rather than an single mega conversion. Unlike the previous code that mixed in the npcomprt ABI stuff here, it's now a very clean "pure memref" conversion. See test/E2E/lower-*-to-memref.mlir and lib/E2E/TensorToMemref/ Most of the changes are concentrated here. 4. As part of the above, we use the upstream ConvertShapeToStandard for lowering shapes. 5. We lower linalg to loops and lower loops to CFG using upstream passes. 6. Rewrite the "ABI" boundaries of the program to npcomprt data structures (LowerToNpcomprtABI). This mainly affects ABI boundaries and how global tensor constants are represented. One of the major improvements in this commit is that now it's a very clean rewrite that just replaces memrefs on ABI boundaries with !npcomprt.tensor (before there was a get_extent function that is not needed). See test/E2E/lower-to-npcomprt-abi.mlir 7. Lower to LLVM with upstream mlir patterns + some patterns for the npcomprt lowerings. One aspect here that is still a remnant of a non-descriptor-based tensor to memref flow is the BypassShapes + LowerShapedResultsToMemref. BypassShapes wraps the "tensor compute" ops in a tcp.shaped_results (basically a "tie_shape" kind of op), and then LowerShapedResultsToMemref uses those annotations to allocate output buffers while lowering the "tensor compute ops". Note that there are very few "tensor compute" ops currently supported (tcp.add + tcp.broadcast_to), so we just hardcode them in both passes. Realistically, I expect this to go away as we fully embrace the descriptor-based approach for simplicity, so don't look too deep into it.
2020-09-17 08:31:40 +08:00
//===----------------------------------------------------------------------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
#include "../PassDetail.h"
#include "npcomp/RefBackend/RefBackend.h"
Totally rework RefE2E tensor to memref flow. (#42) This now gets the overall "RefE2E" compilation stack to a point that I'm fairly happy with. We simplify it by mostly embracing the "descriptor" view of the world. The overall flow is best understood by reading through the createE2ELoweringPipeline function in lib/E2E/E2E.cpp That function creates a pass pipeline that lowers from "TCF" (which is ~numpy level of abstraction) down to LLVM IR. A brief high-level summary of what happens there: 1. TCF to TCP conversion. This involves reifying error handling in the form of shape constraints. See test/Conversion/TCFToTCP/basic.mlir 2. Lowering shape constraints. This converts shape constraints into eager error-handling code. See test/E2E/lower-shape-constraints.mlir This pass will soon go upstream. Because this lowers to std.assert, some later passes like LowerToNpcomprtABI and LowerToLLVM are updated to properly plumb this through e2e. See test/npcomp-run-mlir/invalid-broadcast.mlir for an execution test that properly aborts in case of an error. 3. Lowering tensors to memrefs. This is done via a series of passes rather than an single mega conversion. Unlike the previous code that mixed in the npcomprt ABI stuff here, it's now a very clean "pure memref" conversion. See test/E2E/lower-*-to-memref.mlir and lib/E2E/TensorToMemref/ Most of the changes are concentrated here. 4. As part of the above, we use the upstream ConvertShapeToStandard for lowering shapes. 5. We lower linalg to loops and lower loops to CFG using upstream passes. 6. Rewrite the "ABI" boundaries of the program to npcomprt data structures (LowerToNpcomprtABI). This mainly affects ABI boundaries and how global tensor constants are represented. One of the major improvements in this commit is that now it's a very clean rewrite that just replaces memrefs on ABI boundaries with !npcomprt.tensor (before there was a get_extent function that is not needed). See test/E2E/lower-to-npcomprt-abi.mlir 7. Lower to LLVM with upstream mlir patterns + some patterns for the npcomprt lowerings. One aspect here that is still a remnant of a non-descriptor-based tensor to memref flow is the BypassShapes + LowerShapedResultsToMemref. BypassShapes wraps the "tensor compute" ops in a tcp.shaped_results (basically a "tie_shape" kind of op), and then LowerShapedResultsToMemref uses those annotations to allocate output buffers while lowering the "tensor compute ops". Note that there are very few "tensor compute" ops currently supported (tcp.add + tcp.broadcast_to), so we just hardcode them in both passes. Realistically, I expect this to go away as we fully embrace the descriptor-based approach for simplicity, so don't look too deep into it.
2020-09-17 08:31:40 +08:00
#include "mlir/Dialect/Linalg/IR/LinalgOps.h"
#include "mlir/Dialect/Linalg/IR/LinalgTypes.h"
#include "mlir/Dialect/SCF/SCF.h"
#include "mlir/Dialect/Shape/IR/Shape.h"
#include "mlir/Dialect/StandardOps/IR/Ops.h"
#include "mlir/Pass/Pass.h"
#include "mlir/Pass/PassRegistry.h"
#include "mlir/Transforms/DialectConversion.h"
#include "npcomp/Dialect/RefBackend/IR/RefBackendDialect.h"
#include "npcomp/Dialect/RefBackend/IR/RefBackendOps.h"
Totally rework RefE2E tensor to memref flow. (#42) This now gets the overall "RefE2E" compilation stack to a point that I'm fairly happy with. We simplify it by mostly embracing the "descriptor" view of the world. The overall flow is best understood by reading through the createE2ELoweringPipeline function in lib/E2E/E2E.cpp That function creates a pass pipeline that lowers from "TCF" (which is ~numpy level of abstraction) down to LLVM IR. A brief high-level summary of what happens there: 1. TCF to TCP conversion. This involves reifying error handling in the form of shape constraints. See test/Conversion/TCFToTCP/basic.mlir 2. Lowering shape constraints. This converts shape constraints into eager error-handling code. See test/E2E/lower-shape-constraints.mlir This pass will soon go upstream. Because this lowers to std.assert, some later passes like LowerToNpcomprtABI and LowerToLLVM are updated to properly plumb this through e2e. See test/npcomp-run-mlir/invalid-broadcast.mlir for an execution test that properly aborts in case of an error. 3. Lowering tensors to memrefs. This is done via a series of passes rather than an single mega conversion. Unlike the previous code that mixed in the npcomprt ABI stuff here, it's now a very clean "pure memref" conversion. See test/E2E/lower-*-to-memref.mlir and lib/E2E/TensorToMemref/ Most of the changes are concentrated here. 4. As part of the above, we use the upstream ConvertShapeToStandard for lowering shapes. 5. We lower linalg to loops and lower loops to CFG using upstream passes. 6. Rewrite the "ABI" boundaries of the program to npcomprt data structures (LowerToNpcomprtABI). This mainly affects ABI boundaries and how global tensor constants are represented. One of the major improvements in this commit is that now it's a very clean rewrite that just replaces memrefs on ABI boundaries with !npcomprt.tensor (before there was a get_extent function that is not needed). See test/E2E/lower-to-npcomprt-abi.mlir 7. Lower to LLVM with upstream mlir patterns + some patterns for the npcomprt lowerings. One aspect here that is still a remnant of a non-descriptor-based tensor to memref flow is the BypassShapes + LowerShapedResultsToMemref. BypassShapes wraps the "tensor compute" ops in a tcp.shaped_results (basically a "tie_shape" kind of op), and then LowerShapedResultsToMemref uses those annotations to allocate output buffers while lowering the "tensor compute ops". Note that there are very few "tensor compute" ops currently supported (tcp.add + tcp.broadcast_to), so we just hardcode them in both passes. Realistically, I expect this to go away as we fully embrace the descriptor-based approach for simplicity, so don't look too deep into it.
2020-09-17 08:31:40 +08:00
using namespace mlir;
using namespace mlir::NPCOMP;
//===----------------------------------------------------------------------===//
// LowerConstantTensorsToMemref
//===----------------------------------------------------------------------===//
namespace {
// This class creates global ops for all tensor-valued constants in the program.
// It creates them with pretty names and makes sure that duplicate globals
// aren't created.
class GlobalCreator {
public:
explicit GlobalCreator(ModuleOp module);
refback::GlobalOp getGlobalFor(Attribute attr) {
Totally rework RefE2E tensor to memref flow. (#42) This now gets the overall "RefE2E" compilation stack to a point that I'm fairly happy with. We simplify it by mostly embracing the "descriptor" view of the world. The overall flow is best understood by reading through the createE2ELoweringPipeline function in lib/E2E/E2E.cpp That function creates a pass pipeline that lowers from "TCF" (which is ~numpy level of abstraction) down to LLVM IR. A brief high-level summary of what happens there: 1. TCF to TCP conversion. This involves reifying error handling in the form of shape constraints. See test/Conversion/TCFToTCP/basic.mlir 2. Lowering shape constraints. This converts shape constraints into eager error-handling code. See test/E2E/lower-shape-constraints.mlir This pass will soon go upstream. Because this lowers to std.assert, some later passes like LowerToNpcomprtABI and LowerToLLVM are updated to properly plumb this through e2e. See test/npcomp-run-mlir/invalid-broadcast.mlir for an execution test that properly aborts in case of an error. 3. Lowering tensors to memrefs. This is done via a series of passes rather than an single mega conversion. Unlike the previous code that mixed in the npcomprt ABI stuff here, it's now a very clean "pure memref" conversion. See test/E2E/lower-*-to-memref.mlir and lib/E2E/TensorToMemref/ Most of the changes are concentrated here. 4. As part of the above, we use the upstream ConvertShapeToStandard for lowering shapes. 5. We lower linalg to loops and lower loops to CFG using upstream passes. 6. Rewrite the "ABI" boundaries of the program to npcomprt data structures (LowerToNpcomprtABI). This mainly affects ABI boundaries and how global tensor constants are represented. One of the major improvements in this commit is that now it's a very clean rewrite that just replaces memrefs on ABI boundaries with !npcomprt.tensor (before there was a get_extent function that is not needed). See test/E2E/lower-to-npcomprt-abi.mlir 7. Lower to LLVM with upstream mlir patterns + some patterns for the npcomprt lowerings. One aspect here that is still a remnant of a non-descriptor-based tensor to memref flow is the BypassShapes + LowerShapedResultsToMemref. BypassShapes wraps the "tensor compute" ops in a tcp.shaped_results (basically a "tie_shape" kind of op), and then LowerShapedResultsToMemref uses those annotations to allocate output buffers while lowering the "tensor compute ops". Note that there are very few "tensor compute" ops currently supported (tcp.add + tcp.broadcast_to), so we just hardcode them in both passes. Realistically, I expect this to go away as we fully embrace the descriptor-based approach for simplicity, so don't look too deep into it.
2020-09-17 08:31:40 +08:00
assert(globals.find(attr) != globals.end() && "unknown constant attr");
return globals[attr];
}
private:
DenseMap<Attribute, refback::GlobalOp> globals;
Totally rework RefE2E tensor to memref flow. (#42) This now gets the overall "RefE2E" compilation stack to a point that I'm fairly happy with. We simplify it by mostly embracing the "descriptor" view of the world. The overall flow is best understood by reading through the createE2ELoweringPipeline function in lib/E2E/E2E.cpp That function creates a pass pipeline that lowers from "TCF" (which is ~numpy level of abstraction) down to LLVM IR. A brief high-level summary of what happens there: 1. TCF to TCP conversion. This involves reifying error handling in the form of shape constraints. See test/Conversion/TCFToTCP/basic.mlir 2. Lowering shape constraints. This converts shape constraints into eager error-handling code. See test/E2E/lower-shape-constraints.mlir This pass will soon go upstream. Because this lowers to std.assert, some later passes like LowerToNpcomprtABI and LowerToLLVM are updated to properly plumb this through e2e. See test/npcomp-run-mlir/invalid-broadcast.mlir for an execution test that properly aborts in case of an error. 3. Lowering tensors to memrefs. This is done via a series of passes rather than an single mega conversion. Unlike the previous code that mixed in the npcomprt ABI stuff here, it's now a very clean "pure memref" conversion. See test/E2E/lower-*-to-memref.mlir and lib/E2E/TensorToMemref/ Most of the changes are concentrated here. 4. As part of the above, we use the upstream ConvertShapeToStandard for lowering shapes. 5. We lower linalg to loops and lower loops to CFG using upstream passes. 6. Rewrite the "ABI" boundaries of the program to npcomprt data structures (LowerToNpcomprtABI). This mainly affects ABI boundaries and how global tensor constants are represented. One of the major improvements in this commit is that now it's a very clean rewrite that just replaces memrefs on ABI boundaries with !npcomprt.tensor (before there was a get_extent function that is not needed). See test/E2E/lower-to-npcomprt-abi.mlir 7. Lower to LLVM with upstream mlir patterns + some patterns for the npcomprt lowerings. One aspect here that is still a remnant of a non-descriptor-based tensor to memref flow is the BypassShapes + LowerShapedResultsToMemref. BypassShapes wraps the "tensor compute" ops in a tcp.shaped_results (basically a "tie_shape" kind of op), and then LowerShapedResultsToMemref uses those annotations to allocate output buffers while lowering the "tensor compute ops". Note that there are very few "tensor compute" ops currently supported (tcp.add + tcp.broadcast_to), so we just hardcode them in both passes. Realistically, I expect this to go away as we fully embrace the descriptor-based approach for simplicity, so don't look too deep into it.
2020-09-17 08:31:40 +08:00
};
GlobalCreator::GlobalCreator(ModuleOp module) {
// Create a builder without an insertion point. We will insert using the
// symbol table to guarantee unique names.
OpBuilder globalBuilder(module.getContext());
SymbolTable symbolTable(module);
module.walk([&](ConstantOp op) {
// We only want tensor constants for now.
auto type = op.getType().dyn_cast<RankedTensorType>();
if (!type)
return;
// If we already have a global for this constant value, no need to do
// anything else.
auto it = globals.find(op.getValue());
if (it != globals.end())
return;
// Create a pretty name.
SmallString<64> buf;
llvm::raw_svector_ostream os(buf);
interleave(type.getShape(), os, "x");
os << "x" << type.getElementType();
auto global = globalBuilder.create<refback::GlobalOp>(
Totally rework RefE2E tensor to memref flow. (#42) This now gets the overall "RefE2E" compilation stack to a point that I'm fairly happy with. We simplify it by mostly embracing the "descriptor" view of the world. The overall flow is best understood by reading through the createE2ELoweringPipeline function in lib/E2E/E2E.cpp That function creates a pass pipeline that lowers from "TCF" (which is ~numpy level of abstraction) down to LLVM IR. A brief high-level summary of what happens there: 1. TCF to TCP conversion. This involves reifying error handling in the form of shape constraints. See test/Conversion/TCFToTCP/basic.mlir 2. Lowering shape constraints. This converts shape constraints into eager error-handling code. See test/E2E/lower-shape-constraints.mlir This pass will soon go upstream. Because this lowers to std.assert, some later passes like LowerToNpcomprtABI and LowerToLLVM are updated to properly plumb this through e2e. See test/npcomp-run-mlir/invalid-broadcast.mlir for an execution test that properly aborts in case of an error. 3. Lowering tensors to memrefs. This is done via a series of passes rather than an single mega conversion. Unlike the previous code that mixed in the npcomprt ABI stuff here, it's now a very clean "pure memref" conversion. See test/E2E/lower-*-to-memref.mlir and lib/E2E/TensorToMemref/ Most of the changes are concentrated here. 4. As part of the above, we use the upstream ConvertShapeToStandard for lowering shapes. 5. We lower linalg to loops and lower loops to CFG using upstream passes. 6. Rewrite the "ABI" boundaries of the program to npcomprt data structures (LowerToNpcomprtABI). This mainly affects ABI boundaries and how global tensor constants are represented. One of the major improvements in this commit is that now it's a very clean rewrite that just replaces memrefs on ABI boundaries with !npcomprt.tensor (before there was a get_extent function that is not needed). See test/E2E/lower-to-npcomprt-abi.mlir 7. Lower to LLVM with upstream mlir patterns + some patterns for the npcomprt lowerings. One aspect here that is still a remnant of a non-descriptor-based tensor to memref flow is the BypassShapes + LowerShapedResultsToMemref. BypassShapes wraps the "tensor compute" ops in a tcp.shaped_results (basically a "tie_shape" kind of op), and then LowerShapedResultsToMemref uses those annotations to allocate output buffers while lowering the "tensor compute ops". Note that there are very few "tensor compute" ops currently supported (tcp.add + tcp.broadcast_to), so we just hardcode them in both passes. Realistically, I expect this to go away as we fully embrace the descriptor-based approach for simplicity, so don't look too deep into it.
2020-09-17 08:31:40 +08:00
op.getLoc(), (Twine("__constant_") + os.str()).str(),
op.getValue().cast<ElementsAttr>());
symbolTable.insert(global);
// The symbol table inserts at the end of the module, but globals are a bit
// nicer if they are at the beginning.
global.getOperation()->moveBefore(&module.front());
globals[op.getValue()] = global;
});
}
} // namespace
namespace {
class LowerConstantTensorsToMemref
: public LowerConstantTensorsToMemrefBase<LowerConstantTensorsToMemref> {
2020-09-22 05:48:44 +08:00
void getDependentDialects(DialectRegistry &registry) const override {
registry.insert<refback::RefBackendDialect>();
2020-09-22 05:48:44 +08:00
}
2020-09-29 03:03:54 +08:00
void runOnOperation() override {
Totally rework RefE2E tensor to memref flow. (#42) This now gets the overall "RefE2E" compilation stack to a point that I'm fairly happy with. We simplify it by mostly embracing the "descriptor" view of the world. The overall flow is best understood by reading through the createE2ELoweringPipeline function in lib/E2E/E2E.cpp That function creates a pass pipeline that lowers from "TCF" (which is ~numpy level of abstraction) down to LLVM IR. A brief high-level summary of what happens there: 1. TCF to TCP conversion. This involves reifying error handling in the form of shape constraints. See test/Conversion/TCFToTCP/basic.mlir 2. Lowering shape constraints. This converts shape constraints into eager error-handling code. See test/E2E/lower-shape-constraints.mlir This pass will soon go upstream. Because this lowers to std.assert, some later passes like LowerToNpcomprtABI and LowerToLLVM are updated to properly plumb this through e2e. See test/npcomp-run-mlir/invalid-broadcast.mlir for an execution test that properly aborts in case of an error. 3. Lowering tensors to memrefs. This is done via a series of passes rather than an single mega conversion. Unlike the previous code that mixed in the npcomprt ABI stuff here, it's now a very clean "pure memref" conversion. See test/E2E/lower-*-to-memref.mlir and lib/E2E/TensorToMemref/ Most of the changes are concentrated here. 4. As part of the above, we use the upstream ConvertShapeToStandard for lowering shapes. 5. We lower linalg to loops and lower loops to CFG using upstream passes. 6. Rewrite the "ABI" boundaries of the program to npcomprt data structures (LowerToNpcomprtABI). This mainly affects ABI boundaries and how global tensor constants are represented. One of the major improvements in this commit is that now it's a very clean rewrite that just replaces memrefs on ABI boundaries with !npcomprt.tensor (before there was a get_extent function that is not needed). See test/E2E/lower-to-npcomprt-abi.mlir 7. Lower to LLVM with upstream mlir patterns + some patterns for the npcomprt lowerings. One aspect here that is still a remnant of a non-descriptor-based tensor to memref flow is the BypassShapes + LowerShapedResultsToMemref. BypassShapes wraps the "tensor compute" ops in a tcp.shaped_results (basically a "tie_shape" kind of op), and then LowerShapedResultsToMemref uses those annotations to allocate output buffers while lowering the "tensor compute ops". Note that there are very few "tensor compute" ops currently supported (tcp.add + tcp.broadcast_to), so we just hardcode them in both passes. Realistically, I expect this to go away as we fully embrace the descriptor-based approach for simplicity, so don't look too deep into it.
2020-09-17 08:31:40 +08:00
auto module = getOperation();
GlobalCreator globals(module);
// With the global traversal factored into GlobalCreator, this could in
// principle be done with a pattern.
module.walk([&](ConstantOp op) {
auto type = op.getType().dyn_cast<RankedTensorType>();
if (!type)
return;
auto global = globals.getGlobalFor(op.getValue());
OpBuilder builder(op);
auto memrefType = MemRefType::get(type.getShape(), type.getElementType());
auto memref = builder.create<refback::GetGlobalMemrefOp>(
Totally rework RefE2E tensor to memref flow. (#42) This now gets the overall "RefE2E" compilation stack to a point that I'm fairly happy with. We simplify it by mostly embracing the "descriptor" view of the world. The overall flow is best understood by reading through the createE2ELoweringPipeline function in lib/E2E/E2E.cpp That function creates a pass pipeline that lowers from "TCF" (which is ~numpy level of abstraction) down to LLVM IR. A brief high-level summary of what happens there: 1. TCF to TCP conversion. This involves reifying error handling in the form of shape constraints. See test/Conversion/TCFToTCP/basic.mlir 2. Lowering shape constraints. This converts shape constraints into eager error-handling code. See test/E2E/lower-shape-constraints.mlir This pass will soon go upstream. Because this lowers to std.assert, some later passes like LowerToNpcomprtABI and LowerToLLVM are updated to properly plumb this through e2e. See test/npcomp-run-mlir/invalid-broadcast.mlir for an execution test that properly aborts in case of an error. 3. Lowering tensors to memrefs. This is done via a series of passes rather than an single mega conversion. Unlike the previous code that mixed in the npcomprt ABI stuff here, it's now a very clean "pure memref" conversion. See test/E2E/lower-*-to-memref.mlir and lib/E2E/TensorToMemref/ Most of the changes are concentrated here. 4. As part of the above, we use the upstream ConvertShapeToStandard for lowering shapes. 5. We lower linalg to loops and lower loops to CFG using upstream passes. 6. Rewrite the "ABI" boundaries of the program to npcomprt data structures (LowerToNpcomprtABI). This mainly affects ABI boundaries and how global tensor constants are represented. One of the major improvements in this commit is that now it's a very clean rewrite that just replaces memrefs on ABI boundaries with !npcomprt.tensor (before there was a get_extent function that is not needed). See test/E2E/lower-to-npcomprt-abi.mlir 7. Lower to LLVM with upstream mlir patterns + some patterns for the npcomprt lowerings. One aspect here that is still a remnant of a non-descriptor-based tensor to memref flow is the BypassShapes + LowerShapedResultsToMemref. BypassShapes wraps the "tensor compute" ops in a tcp.shaped_results (basically a "tie_shape" kind of op), and then LowerShapedResultsToMemref uses those annotations to allocate output buffers while lowering the "tensor compute ops". Note that there are very few "tensor compute" ops currently supported (tcp.add + tcp.broadcast_to), so we just hardcode them in both passes. Realistically, I expect this to go away as we fully embrace the descriptor-based approach for simplicity, so don't look too deep into it.
2020-09-17 08:31:40 +08:00
op.getLoc(), memrefType, global.getName());
Value tensor =
builder.create<refback::MemrefToTensorOp>(op.getLoc(), type, memref);
Totally rework RefE2E tensor to memref flow. (#42) This now gets the overall "RefE2E" compilation stack to a point that I'm fairly happy with. We simplify it by mostly embracing the "descriptor" view of the world. The overall flow is best understood by reading through the createE2ELoweringPipeline function in lib/E2E/E2E.cpp That function creates a pass pipeline that lowers from "TCF" (which is ~numpy level of abstraction) down to LLVM IR. A brief high-level summary of what happens there: 1. TCF to TCP conversion. This involves reifying error handling in the form of shape constraints. See test/Conversion/TCFToTCP/basic.mlir 2. Lowering shape constraints. This converts shape constraints into eager error-handling code. See test/E2E/lower-shape-constraints.mlir This pass will soon go upstream. Because this lowers to std.assert, some later passes like LowerToNpcomprtABI and LowerToLLVM are updated to properly plumb this through e2e. See test/npcomp-run-mlir/invalid-broadcast.mlir for an execution test that properly aborts in case of an error. 3. Lowering tensors to memrefs. This is done via a series of passes rather than an single mega conversion. Unlike the previous code that mixed in the npcomprt ABI stuff here, it's now a very clean "pure memref" conversion. See test/E2E/lower-*-to-memref.mlir and lib/E2E/TensorToMemref/ Most of the changes are concentrated here. 4. As part of the above, we use the upstream ConvertShapeToStandard for lowering shapes. 5. We lower linalg to loops and lower loops to CFG using upstream passes. 6. Rewrite the "ABI" boundaries of the program to npcomprt data structures (LowerToNpcomprtABI). This mainly affects ABI boundaries and how global tensor constants are represented. One of the major improvements in this commit is that now it's a very clean rewrite that just replaces memrefs on ABI boundaries with !npcomprt.tensor (before there was a get_extent function that is not needed). See test/E2E/lower-to-npcomprt-abi.mlir 7. Lower to LLVM with upstream mlir patterns + some patterns for the npcomprt lowerings. One aspect here that is still a remnant of a non-descriptor-based tensor to memref flow is the BypassShapes + LowerShapedResultsToMemref. BypassShapes wraps the "tensor compute" ops in a tcp.shaped_results (basically a "tie_shape" kind of op), and then LowerShapedResultsToMemref uses those annotations to allocate output buffers while lowering the "tensor compute ops". Note that there are very few "tensor compute" ops currently supported (tcp.add + tcp.broadcast_to), so we just hardcode them in both passes. Realistically, I expect this to go away as we fully embrace the descriptor-based approach for simplicity, so don't look too deep into it.
2020-09-17 08:31:40 +08:00
op.replaceAllUsesWith(tensor);
op.erase();
});
}
};
} // namespace
std::unique_ptr<OperationPass<ModuleOp>>
mlir::NPCOMP::createLowerConstantTensorsToMemrefPass() {
return std::make_unique<LowerConstantTensorsToMemref>();
}