We just have to do this: I ran into an issue today where I needed to make a one line patch to stablehlo to work around a compiler issue, and it is completely unapparent how to do so given that the mlir-hlo repo is a read-only export and is at the tail end of a multi-week integration chain from the open-source stablehlo repo.
We've discussed this often enough and gotten +1 from everyone that they are ok with taking the e2e testing hit if it becomes necessary: It is necessary as the current situation is unmanageable.
Looking at it, I expect it wouldn't actually be very difficult to build a little runner binary out of the stablehlo interpreter and subprocess call that in order to get the testing coverage back. I leave that as an exercise to the users of this part of the stack and recommend following the breadcrumbs from the deleted python/torch_mlir_e2e_test/stablehlo_backends/linalg_on_tensors.py file and the main.py changes.
Note that I am pointing us at a stablehlo fork for the moment until it is apparent that we don't need to carry any local patches to it. We can update this in a few days if everything is clear.
* feat: split pytorch requirements into stable and nightly
* fix: add true to tests to see full output
* refactor: add comments to explain true statement
* feat: move some tests to experimental mode
* refactor: refactor pipeline into more fine grained difference
* feat: add version differentiation for some tests
* feat: activate more configs
* refactor: change implementation to use less requirement files
* refactor: remove contraints used for testing
* fix: revert some requirement file names
* refactor: remove unnecessary ninja install
* fix: fix version parsing
* refactor: remove dependency on torchvision in main requirements file
* refactor: remove index url
* style: remove unnecesary line switch
* fix: readd index url
Creates a build_linux_arm64 job that builds the release on an arm64 self-hosted runner.
Drop Python 3.10 support
Pass TM_TORCH_VERSION to choose the Stable PyTorch version (since arm64 doesn't have nightly builds)
Borrows nightly / stable Pytorch switch from the WIP
https://github.com/llvm/torch-mlir/pull/2038
This patch replaces all MHLO operations with their StableHLO
counterparts and adds a validation pass to ensure that no MHLO operations
remain before translating all Stablehlo operations to the MHLO dialect
for further lowering to the Linalg dialect.
This patch also updates all lit tests so that they refer to the
`convert-torch-to-stablehlo` pass and so that they check for StableHLO
operations.
Previously, torchvision had not released WHL files for Python v3.8,
causing failures in torch-mlir python package builds, so we had disabled
building for Python v3.8.
Now that the WHL files are back, this patch re-enables v3.8 builds.
* [custom op] Generalize shape library logic to work with dtypes
This commit generalizes the shape library logic, so that dtype rules
for ops can also be expressed using the same mechanism. In other
words, each op can now have a shape function and a dtype function
specified in Python that is imported during lowering to calculate the
shapes and dtypes throught a program. For more information about how
to specify a dtype function, see the updated
`docs/adding_a_shape_and_dtype_function.md`.
For those not familiar with how the shape library works, the file
`docs/calculations_lib.md` provides an overview.
This was an experimental attempt at rolling out own op-by-op executor
with `__torch_dispatch__`, but it proved difficult to make it robust.
Op-by-op execution is very easy to implement robustly now with the
PyTorch 2.0 stack, so we don't need eager_mode.
Downstream users were using eager_mode to implement lockstep numerical
accuracy debuggers. We implemented the same functionality with
TorchDynamo in https://github.com/llvm/torch-mlir/pull/1681 so now there
is not much reason to continue maintaining it.
This more accurately reflects what it is. The previous name was
conflating the use of RefBackend (which `linalg`, `tosa`, and `mhlo`
configs all use) with the use of the linalg backend (e.g. TorchToLinalg).
This conflation was artifically giving the linalg backend a "privileged"
position, which we want to avoid. We still keep it as the default
backend, and it remains the most complete, but at least there's not
artificial boosting.
This adds a basic e2e Config for TorchDynamo using
Linalg-on-Tensors/RefBackend.
But TorchDynamo is pretty orthogonal to
various other pieces, so it should compose nicely with variations like:
- Switching out all the backends (Linalg-on-Tensors, TOSA, MHLO)
- PyTorch functionalization and decompositions
- Taking the example inputs and compiling with all dynamic or all static
shapes without duplicating tests.
This adds it to the CI, but there are still a lot of XFAIL's.
This also adds a helper `from torch_mlir.dynamo import
make_simple_dynamo_backend` which simplifies some of the steps for
making a Torch-MLIR-based TorchDynamo backend. We include "simple" in
the name because we are going to be exploring various things next from
the long-term roadmap.
The next steps are:
- Burn down all the XFAIL's.
- Start working on the pieces from the [long-term roadmap](https://github.com/llvm/torch-mlir/blob/main/docs/long_term_roadmap.md).
- Add functionalization/decompositions into the TorchDynamo flow and
remove reliance on the current Torch-MLIR "frontend".
- Write a pure-Python direct FX->MLIR importer.
- Hook up the new PyTorch symbolic shape stuff.
- Explore PrimTorch decompositions for simplifying backends.
We want each build to be reproducible regardless of prior builds and
prior package installations, but pip, by default, uses cached packages
from previous invocations of `pip install`. As a result, the incorrect
dependencies downloaded in the RollPyTorch workflow in the main
repository cannot be reproduced in private forks of the repository. To
resolve this problem, this patch adds a `--no-cache-dir` flag to pip, so
that it fetches and inspects each requested package independent or prior
installations.
This patch updates the build_linux_packages.sh script so that when
PyTorch needs to be built from source, it is built _before_ building
LLVM and before building Torch-MLIR. The rationale behind this change
is that previously, when the PyTorch build was triggered through the
Torch-MLIR build, the PyTorch compilation added more entries to the
ccache artifacts. However, since we cache the PyTorch _binary_ (i.e.
the WHL file), there is no need to add the PyTorch compilation to the
ccache artifacts. By removing the PyTorch compilation files, we keep
the ccache artifact size small, thus reducing the number of evictions
when we exceed GitHub's allowed limit.
Without this patch, CI logs contained the line:
-- Linker detection: GNU ld
GNU ld is notoriously slow at linking large binaries, so this patch
swaps GNU ld with the LLVM linker.
Since the linker invocation is driven through the compiler, perhaps the
best way to use the LLVM linker is to tell the compiler which linker
binary to use. This patch adds the `-fuse-ld=lld` flag to all Linux
builds of Torch-MLIR in CI to make it use lld.
* ci: cache PyTorch source builds
This patch reduces the time spent in regular CI builds by caching
PyTorch source builds. Specifically, this patch:
1. Makes CI lookup the cache entry for the PyTorch commit hash in
pytorch-version.txt
2. If lookup was successful, CI fetches the previously-generated WHL
file into the build_tools/python/wheelhouse directory
3. CI sets the `TM_PYTORCH_INSTALL_WITHOUT_REBUILD` variable to `true`
4. The build_libtorch.sh script then uses the downloaded WHL file
instead of rebuilding PyTorch
* ci: warm up PyTorch source cache during daily RollPyTorch action
This patch makes the RollPyTorch action write the updated WHL file to
the cache, so that it can be later retrieved by CI that runs for each
PR. We deliberately add the caching step to the end of the action since
the RollPyTorch action never needs to read from the cache, although
executing this step earlier in the process should not cause problems
either.
* build: disable LTC again so that we can bump PyTorch version
When built using PyTorch's master branch, the LTC code has been failing
to build for a few days. As a result, the PyTorch version referenced by
Torch-MLIR is stalled to the one from October 4th.
In an effort to advance to PyTorch version, this patch disables LTC, and
a subsequent patch will advance the PyTorch version.
* update PyTorch version to 1.14.0.dev20221010
Also disables the `UpSampleNearest2dDynamicFactor_basic` e2e test, since
the (PyTorch) oracle differs from the computed value for both the
refbackend and the eager_mode backends.
Instead of letting the auto-update script either fail because of script
errors or letting it commit bad versions, this patch makes the update
process manual, for now. Once the script stabilizes, I will its
re-enable periodic execution.
Updating the PyTorch version may break the Torch-MLIR build, as it did
recently, since the PyTorch update caused the shape library to change,
but the shape library was not updated in the commit for updating
PyTorch.
This patch introduces a new default-off environment variable to the
build_linux_packages.sh script called `TM_UPDATE_ODS_AND_SHAPE_LIB`
which instructs the script to run the update_torch_ods.sh and
update_shape_lib.sh scripts.
However, running these scripts requires an in-tree build and the tests
that run for an in-tree build of Torch-MLIR are more comprehensive than
those that run for an out-of-tree build, so this patch also swaps out
the out-of-tree build for an in-tree build.
Prior to this patch, the release process (`pip wheel`) retrieved
dependencies from the pyproject.toml file, which specified a version of
PyTorch that defaulted to the most recent nightly release. Instead, we
want the release process to use the same pinned PyTorch version as the
development build of PyTorch.
Since TOML files can't reference the pytorch-requirements.txt file, this
patch puts the dependencies from pyproject.toml into
whl-requirements.txt, which references pytorch-requirements.txt.
`git diff` does not work by default on untracked files. Since the
function `_check_file_not_changed_by` stores the new generated file in
an untracked file, `git diff` was not catching any modifications in
the new generated file. This commit adds the flag `--no-index` to make
`git diff` work with untracked files.
This patch fetches the most recent nightly (binary) build of PyTorch,
before pinning it in pytorch-requirements.txt, which is referenced in
the top-level requirements.txt file. This way, end users will continue
to be able to run `pip -r requirements.txt` without worrying whether
doing so will break their Torch-MLIR build.
This patch also fetches the git commit hash that corresponds to the
nightly release, and this hash is passed to the out-of-tree build so
that it can build PyTorch from source.
If we were to sort the torch versions as numbers (in the usual
descending order), then 1.9 appears before 1.13. To fix this problem,
we use the `--version-sort` flag (along with `--reverse` for specifying
a descending order). We also filter out lines that don't contain
version numbers by only considering lines that start with a digit.
As a matter of slight clarity, this patch renames the variable
`torch_from_src` to `torch_from_bin`, since that variable is initialized
to `TM_USE_PYTORCH_BINARY`.
Co-authored-by: powderluv <powderluv@users.noreply.github.com>
This adds a very long and obnoxious option to disable crashing tests.
The right fix here is to use the right multiprocessing techniques to
ensure that segfaulting tests can be XFAILed like normal tests, but we
currently don't know how to implement "catch a segfault" in Python
(patches or even just ideas welcome).
Motivated by #1361, where we ended up removing two tests from *all*
backends due to a failure in one backend, which is undesirable.
We added both ipc=host and explicit ulimits. This _may_ be causing slow downs on GHA. Remove the ulimit setting still passes all the CI tests locally. `--ipc=host` is still required.
The new logic has the following benefits:
1. It does not clobber the working tree state. We expect testing to not
change the work tree.
2. It correctly handles the case where a user has changes to the
generated files, but hasn't checked them in yet (this happens
frequently when adding new ops).
Gets both CI and Release builds integrated in one workflow.
Mount ccache and pip cache as required for fast iterative builds
Current Release docker builds still run with root perms, fix it
in the future to run as the same user.
There may be some corner cases left especially when switching
build types etc.
Docker build TEST plan:
tl;dr:
Build everythin: Releases (Python 3.8, 3.9, 3.10) and CIs.
TM_PACKAGES="torch-mlir out-of-tree in-tree"
2.57s user 2.49s system 0% cpu 30:33.11 total
Out of Tree + PyTorch binaries:
Fresh build (purged cache):
TM_PACKAGES="out-of-tree"
0.47s user 0.51s system 0% cpu 5:24.99 total
Incremental with ccache:
TM_PACKAGES="out-of-tree"
0.09s user 0.08s system 0% cpu 34.817 total
Out of Tree + PyTorch from source
Incremental
TM_PACKAGES="out-of-tree" TM_USE_PYTORCH_BINARY=OFF
1.58s user 1.81s system 2% cpu 1:59.61 total
In-Tree + PyTorch binaries:
Fresh build and tests: (purge ccache)
TM_PACKAGES="in-tree"
0.53s user 0.49s system 0% cpu 6:23.35 total
Fresh build/ but with prior ccache
TM_PACKAGES="in-tree"
0.45s user 0.66s system 0% cpu 3:57.47 total
Incremental in-tree with all tests and regression tests
TM_PACKAGES="in-tree"
0.16s user 0.09s system 0% cpu 2:18.52 total
In-Tree + PyTorch from source
Fresh build and tests: (purge ccache)
TM_PACKAGES="in-tree" TM_USE_PYTORCH_BINARY=OFF
2.03s user 2.28s system 0% cpu 11:11.86 total
Fresh build/ but with prior ccache
TM_PACKAGES="in-tree" TM_USE_PYTORCH_BINARY=OFF
1.58s user 1.88s system 1% cpu 4:53.15 total
Incremental in-tree with all tests and regression tests
TM_PACKAGES="in-tree" TM_USE_PYTORCH_BINARY=OFF
1.09s user 1.10s system 1% cpu 3:29.84 total
Incremental without tests
TM_PACKAGES="in-tree" TM_USE_PYTORCH_BINARY=OFF TM_SKIP_TESTS=ON
1.52s user 1.42s system 3% cpu 1:15.82 total
In-tree+out-of-tree + Pytorch Binaries
TM_PACKAGES="out-of-tree in-tree"
0.25s user 0.18s system 0% cpu 3:01.91 total
To clear all artifacts:
rm -rf build build_oot llvm-build libtorch docker_venv
externals/pytorch/build
On my local machine, `unzip` didn't exist (producing a "command not
found" error), but CMake ignored the error. Although the build did
succeed (because it found a previously-built version of libtorch), it
seems better to abort builds on such failures, so this patch checks the
return code of all external process invocations.
Along similar lines, this patch also updates the shell scripts in
`build_tools` to extensively use double-quoting to prevent unintentional
word splitting or globbing. Since some of the scripts execute `rm`
while using shell variables, this patch also adds the preamble `set -u`
to abort execution if an undefined variable is referenced, so that we
reduce the chances of executing `rm -rf /` if the path expression
happens to refer to an undefined variable.
Stella Laurenzo
Matthias Gehre
Ashay Rane
maxbartel
powderluv
Maksim Levental
Daniel Ellis
Ramiro Leal-Cavazos
Sean Silva
Tanyo Kwok
Jae Hoon (Antonio) Kim