Compiling with clang 16.0 on macOS I have warnings about incorrect
printf format (see below).
Values to be printed are `int64_t`, but they are printed with `%zu` and
`%ld`, which are not portable way to print this type.
```
<...>/torch-mlir/test/CAPI/torch.c:52:3: warning: format specifies type 'size_t' (aka 'unsigned long') but the argument has type 'int64_t' (aka 'long long') [-Wformat]
52 | DEFINE_CHECK(NonValueTensor)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
<...>/torch-mlir/test/CAPI/torch.c:37:13: note: expanded from macro 'DEFINE_CHECK'
36 | fprintf(stderr, #TTT "Type %s rank: %zu\n", testName, \
| ~~~
37 | torchMlirTorch##TTT##TypeGetRank(TTT##Type)); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<scratch space>:78:1: note: expanded from here
78 | torchMlirTorchNonValueTensorTypeGetRank
| ^
<...>/torch-mlir/test/CAPI/torch.c:52:3: warning: format specifies type 'long' but the argument has type 'int64_t' (aka 'long long') [-Wformat]
52 | DEFINE_CHECK(NonValueTensor)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
<...>/torch-mlir/test/CAPI/torch.c:42:15: note: expanded from macro 'DEFINE_CHECK'
41 | fprintf(stderr, #TTT "Type %s pos %d size: %ld\n", testName, i, \
| ~~~
42 | TTT##Sizes[i]); \
| ^~~~~~~~~~~~~
<scratch space>:85:1: note: expanded from here
85 | NonValueTensorSizes
| ^
<...>/torch-mlir/test/CAPI/torch.c:53:3: warning: format specifies type 'size_t' (aka 'unsigned long') but the argument has type 'int64_t' (aka 'long long') [-Wformat]
53 | DEFINE_CHECK(ValueTensor)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
<...>/torch-mlir/test/CAPI/torch.c:37:13: note: expanded from macro 'DEFINE_CHECK'
36 | fprintf(stderr, #TTT "Type %s rank: %zu\n", testName, \
| ~~~
37 | torchMlirTorch##TTT##TypeGetRank(TTT##Type)); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<scratch space>:112:1: note: expanded from here
112 | torchMlirTorchValueTensorTypeGetRank
| ^
<...>/torch-mlir/test/CAPI/torch.c:53:3: warning: format specifies type 'long' but the argument has type 'int64_t' (aka 'long long') [-Wformat]
53 | DEFINE_CHECK(ValueTensor)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
<...>/torch-mlir/test/CAPI/torch.c:42:15: note: expanded from macro 'DEFINE_CHECK'
41 | fprintf(stderr, #TTT "Type %s pos %d size: %ld\n", testName, i, \
| ~~~
42 | TTT##Sizes[i]); \
| ^~~~~~~~~~~~~
<scratch space>:119:1: note: expanded from here
119 | ValueTensorSizes
| ^
4 warnings generated.
```
This is part 1 of ~3, formatting all miscellaneous text files and CPP files matched by a first run of pre-commit. These tend to be low change-traffic and are likely not disruptive.
Subsequent patches will format Python files and remaining CPP files.
This is a first step towards the structure we discussed here:
https://gist.github.com/stellaraccident/931b068aaf7fa56f34069426740ebf20
There are two primary goals:
1. Separate the core project (C++ dialects and conversions) from the
hard PyTorch dependencies. We move all such things into projects/pt1 as
a starting point since they are presently entangled with PT1-era APIs.
Additional work can be done to disentangle components from that
(specifically LTC is identified as likely ultimately living in a
`projects/ltc`).
2. Create space for native PyTorch2 Dynamo-based infra to be upstreamed
without needing to co-exist with the original TorchScript path.
Very little changes in this path with respect to build layering or
options. These can be updated in a followup without commingling
directory structure changes.
This also takes steps toward a couple of other layering enhancements:
* Removes the llvm-external-projects/torch-mlir-dialects sub-project,
collapsing it into the main tree.
* Audits and fixes up the core C++ build to account for issues found
while moving things. This is just an opportunistic pass through but
roughly ~halves the number of build actions for the project from the
high 4000's to the low 2000's.
It deviates from the discussed plan by having a `projects/` tree instead
of `compat/`. As I was thinking about it, this will better accommodate
the follow-on code movement.
Once things are roughly in place and the CI passing, followups will
focus on more in-situ fixes and cleanups.
This moves the bulk of the Python code (including the Torch interop)
from `frontends/pytorch` into `torch-mlir/TorchPlugin`. This also
required reconciling a bunch of other Python-related stuff, like the
`torch` dialects.
As I did this, it was simpler to just remove all the old numpy/basicpy
stuff because we were going to delete it anyway and it was faster than
debugging an intermediate state that would only last O(days) anyway.
torch-mlir has two top-level python packages (built into the
`python_packages` directory):
- `torch_mlir_dialects`: `torch` dialect Python bindings (does not
depend on PyTorch). This also involves building the aggregate CAPI for
`torch-mlir`.
- `torch_mlir`: bindings to the part of the code that links against
PyTorch (or C++ code that transitively does).
Additionally, there remain two more Python packages in npcomp (but
outside `torch-mlir`):
- `npcomp_torch`: Contains the e2e test framework and testing configs
that plug into RefBackend and IREE.
- `npcomp_core`: Contains the low-level interfaces to RefBackend and
IREE that `npcomp_torch` uses, along with its own
`MLIR_PYTHON_PACKAGE_PREFIX=npcomp.` aggregation of the core MLIR
python bindings. (all other functionality has been stripped out)
After all the basicpy/numpy deletions, the `npcomp` C++ code is now very
tiny. It basically just contains RefBackend and the `TorchConversion`
dialect/passes (e.g. `TorchToLinalg.cpp`).
Correspondingly, there are now 4 main testing targets paralleling the
Python layering (which is reflective of the deeper underlying dependency
structure)
- `check-torch-mlir`: checks the `torch-mlir` pure MLIR C++ code.
- `check-torch-mlir-plugin`: checks the code in `TorchPlugin` (e.g.
TorchScript import)
- `check-frontends-pytorch`: Checks the little code we have in
`frontends/pytorch` -- mainly things related to the e2e framework
itself.
- `check-npcomp`: Checks the pure MLIR C++ code inside npcomp.
There is a target `check-npcomp-all` that runs all of them.
The `torch-mlir/build_standalone.sh` script does a standalone build of
`torch-mlir`.
The e2e tests (`tools/torchscript_e2e_test.sh`) are working too.
The update_torch_ods script now lives in
`torch-mlir/build_tools/update_torch_ods.sh` and expects a standalone
build.
This change also required a fix upstream related to cross-shlib Python
dependencies, so we also update llvm-project to
8dca953dd39c0cd8c80decbeb38753f58a4de580 to get
https://reviews.llvm.org/D109776 (no other fixes were needed for the
integrate, thankfully).
This completes most of the large source code changes. Next will be
bringing the CI/packaging/examples back to life.
- Make consistent with MLIR Core
- Use `//` or `///` comments.
- Use `bool` type for booleans
- No duplicated comments in .cpp files
- Split types into separate files `{Basicpy,Numpy,Torch}Types.h`
- Add dialect prefix consistently to C API symbols. We have lots of
similarly named types (e.g. "list" type in basicpy and torch).
* Need to have a dag of shared library deps in order to interop across python extensions (as presented in ODM).
* Introduced add_npcomp_library and friends to mirror the MLIR setup.
* Adds a libNPCOMP.so shared library.
* Redirects tools and extensions to link against libNPCOMP.so (instead of static libs).
* Moves all libraries to lib/, all binaries to bin/ and all python extensions to python/. The invariant is that the rpaths are setup to have a one level directory structure.
* Reworks the _torch_mlir extension to build like the others (still need to come up with a consolidated rule to do this instead of open coded).
* Includes an upstream version bump to pick up needed changes.
Sizes with dynamic linking (stripped, release, asserts enabled):
libNPCOMP.so: 43M (includes much of the underlying LLVM codegen deps)
libMLIR.so: 31M
_npcomp.so: 1.6M (python extension)
_torch_mlir.so: 670K (python extension)
npcomp-capi-ir-test: 6.3K
npcomp-opt: 351K
npcomp-run-mlir: 461K
mnist-playground: 530K
Still more can be done to normalize and optimize but this gets us structurally to the starting point.
* Adds at::Tensor -> MlirValue tracking.
* Adds conversions for tensor and scalar types to MLIR types.
* Adds npcomp C APIs for constructing custom types.
* Reworks pybind include so as to get Torch pybind helpers (needed to pass at::Tensor type from Python->C++).
Dmitry Babokin
Stella Laurenzo
Matthias Gehre
Maksim Levental
Sean Silva