It's actually fine to not check the rank of the indices, because the conversion anyways flattens the index tensor to be (1, numElements) before applying tosa::gather, and then anyways reshapes the output tensor to the output shape of the aten.embedding.
The implementation at this place was a remnent of the times the pipeline was
run only once.
Rely instead on the backend verification, after optimizations have had an
opportunity to resolve some uncertainties. (e.g. `!torch.optional`).
* RecomposeComplexOps: Remove dead slice op
* lib/Dialect/Torch/IR/TorchOps.cpp: Fold slice ops even when they are on non-value tensors
* lib/Conversion/TorchToTosa/TorchToTosa.cpp: Fix slice start/end out of range/none
* lib/Dialect/Torch/IR/TorchOps.cpp: AtenSliceTensorOp::fold: Fold slices that go from 0:int_max
* More tests for aten.split.Tensor
In PyTorch, the `NumberType` is equal to `Union[int, float,
complex]`. However, the abstract interpretation library was treating
the `NumberType` as `Union[int, float]`, resulting in type mismatches
when reifying certain dtype functions. This commit fixes the type
inconsistency by having the abstract interpretation functions take as
an input a `Union[int, float, complex]` for the ops that take
`!torch.number` inputs.
This commit adds the support for index.Tensor op when the index values
are negative. This commit wraps around the index values by checking
their values at run time.
Signed-Off By: Vivek Khandelwal <vivek@nod-labs.com>
check the return type of the division to figure out whether to use
the floating point implementation of a division or to use the integer.
the issue rose from the fact that the inputs are all integer but the
result was casted to floating point. The conversion then chose to
use the integer implementation of division which is not legal in tosa
when all the inputs get casted to floating point.
fix(TorchToLinalg): AtenDivScalarOp
upcast self operand as well if applicable, the self operand must also
be casted to float as it can be an integer.
* add support for mhlo
* Add Test for torch.ne
* fix torch.ne shape/add static test case
* add support for static torch.ne
---------
Co-authored-by: root <root@n31-177-039.byted.org>
The `copy_` op being replaced by `RecomposeSliceCopy_` operates on a
subset of the tensor being mutated, while the `index_put` op being
used to replace the `copy_` op operates on the entire tensor being
mutated. This means that the result type of the `index_put` should be
the type of the input to `index_put` and we need to make sure that
`copy_` does not have users before replacing to avoid type conflicts.
This commit also fixes the result type used for the
`AtenArangeStartStepOp`, and an off-by-1 error when creating the
indices vector.
Lastly, this commit also clamps the `end` value from the slice to the
size of the dimension.
When `use_tracing=True` is used to import a model into Torch-MLIR,
several casts get inserted in the IR to bridge the untyped inputs and
outputs with the typed body of the computation. These casts create
extra aliases of tensors that cause the current analysis in
`maximize-value-semantics` to fail.
In particular, the `maximize-value-semantics` analysis assumes that the
only valid alias right after an overwrite is the overwritten
alias. So, if there is a use of a casted version of the overwritten
alias after the overwrite, the analysis fails.
This commit improves the analysis by identifying all cast-like aliases
of the overwritten alias and allowing such aliases to be used after an
overwrite.
Because this issue only arises when using tracing, it cannot be
currently tested e2e, so only lit test is added.
* Add AtenIndexTensor StableHlo support
* clean up
* Empty commit, trigger test
* try to debug hanging test
* fix segfulat
* fix bad include
---------
Co-authored-by: zhekun.zhang <zhekun.zhang@bytedance.com>
Lowering torch operations that allow different compatible data types
in its operands to tosa end up generating invalid tosa IR with mixed
data types. In tosa spec, certain operations (generally element-wise
operations) require all operands to have the same data type.
Add wrapper functions for those element-wise tosa ops to perform op
creation with type conversion if necessary.
This commit adds dtype functions for all the torch ops that did not
previously have one and removes the pass `RefineTypes`, since the
abstract interpretation library now takes care of all the dtype
propagation.
All dtype functions added are tested except for
- `aten.embedding`
- `aten._embedding_bag`
- `aten.embedding_bag`
These functions need a change to the testing framework to allow
specifying the actual data inside the tensor used for testing. I will
fix this in a follow up patch.
Co-authored-by: Jiahao Li <liplus17@163.com>
Add support for lowering torch.aten.cat to tosa.concat
* add support for aten cat to tosa
---------
Co-authored-by: yifei <y.zhou@xilinx.com>
Co-authored-by: Lisa Liu <lingl@xilinx.com>
When the user does not specify the `stride` value in 2d pooling ops,
`stride` is given the value of an empty list. However, the current
lowerings for pooling ops assumed that the `stride` operand would
always be a list of two ints, leading to crashes when that was not the
case. This commit fixes the crashes by setting the value of `stride`
to `kernel_size` when `stride` is the empty list, since this is the
default `stride` value specified in PyTorch docs. See:
https://pytorch.org/docs/stable/generated/torch.nn.MaxPool2d.html#torch.nn.MaxPool2d
The current decomposition for `aten.randn.generator` does not specify
the `dtype` argument of the empty tensors created to store the random
values. This leads to invalid IR when the output type of the `randn`
op is not the default PyTorch dtype.
-- In Python we have the concept of negative dimension indexing.
-- We would want to normalize such dimensions to be +ve and within the
expected range instead.
-- This commit takes care of a few remaining set of Ops and their
lowerings by applying `toPositiveDim` and `isValidDim` to the
extracted integer `dim` value.
Signed-off-by: Abhishek Varma <abhishek@nod-labs.com>
-- This commit adds e2e support for atend.sort op.
-- 1. Adds aten.sort op in torch dialect.
-- 2. Adds tm_tensor.sort op in TMTensor dialect.
-- 3. Adds lowering of aten.sort -> tm_tensor.sort.
Signed-off-by: Abhishek Varma <abhishek@nod-labs.com>
`TorchToTMTensor` depends on `TorchMLIRTorchUtils` for
`mlir::torch::torch_upstream::get_reduction_enum`.
`TorchMLIRTorchConversionPasses` depends on multiple libs for both tblgen'd
headers and definitions. Test with `ninja TorchMLIRTorchConversionPasses` from
a clean build.
-- This commit adds e2e support for aten.randint by decomposing it into
an aten.randint.low by setting low=0.
Signed-off-by: Abhishek Varma <abhishek@nod-labs.com>
This commits adds the support for cases for index_put_op:
1.) where index is a 2-d tensor.
2.) where indices is a list of tensors and none, with exactly
2 non none tensors along the consecutive dimensions.
This commit also adds a utility to compute the broadcast shape
given the two input tensors.
Signed-Off By: Vivek Khandelwal <vivek@nod-labs.com>
This commit also adds the support for non-unit output padding in the
case of transposed convolution.
Signed-Off By: Vivek Khandelwal<vivek@nod-labs.com>
The ops `aten.convolution_overrideable` and
`aten.convolution_backward_overrideable` are currently not e2e tested
in Torch-MLIR. Moreover, there is no way to add e2e tests for them
because the ops cannot be called using the CPU backend (this also
prevents adding tested dtype functions for these ops). Since these two
ops are not expected to ever appear in PyTorch traces obtained through
standard means (https://github.com/pytorch/pytorch/issues/97481),
Torch-MLIR should not have to worry about them.
The `RecomposeComplexOps` pass currently does not have a TableGen
declaration and it is using the base class of `DecomposeComplexOps`,
which causes `--mlir-print-ir-after-all` to create wrong pass
labels. This commit fixes that as well as some minor typos in the name
of the pass.
To keep things simple in shape functions, `Scalar` inputs are
considered `float`s. This means that when inserting the shape
functions into the IR, we must cast any `!torch.number`s into `float`s
so that the operand type matches the expected type in the shape
function. This commit adds the cast from `Scalar` to `float`.
There are several ops that have their shape function upstream and had
not been updated in Torch-MLIR to use the upstream version. This
commit updates those shape function. In addition, TODOs have been
added for shape functions that should be upstream but are not.
The original design for the dtype functions outlined in
https://github.com/llvm/torch-mlir/issues/1462 was unable to properly
handle ops that take optional tensors as an input when the optional
tensor has a value of None. By the time the op gets imported into
torch-mlir, if an optional value is None, all information about the
original type is lost from the op type signature, preventing
torch-mlir from knowing if a value of None was from an optional tensor
or not, which was crucial in the original design since each tensor
argument must be turned into two separate arguments for the dtype
function.
This commit changes the interface to dtype functions such that each
tensor turns into a tuple of two ints, the first representing the rank
of the tensor and the second the dtype of the tensor. Since now there
is a one-to-one correspondence between the operands of an op and the
operands of its dtype function, there is no ambiguity about which
operand of the op corresponds with which operand of the dtype
function.
To test the implementation, this commit defines dtype function for
convolution op, which takes one optional tensor as an argument.
* implemented ceil_mode== true support for lowering aten.max_pool2d to tosa
* add e2e test for lowering aten.max_pool2d to tosa with ceil_mode=true
---------
Co-authored-by: Lisa Liu <lingl@xilinx.com>
* LowerToBackendContract: Explicitly error out on unimplemented operator
But only reject torch.operator when results are invalid.
Otherwise it might be a custom op that the backend supports.
This commit adds a check that `defaultDtype` exists in the RefineTypes
handling of `AtenSumOp` before accessing the method `isInteger`, which
crashes the program is `defaultDtype` is null.
The handling of `defaultDtype` is the same as the one used for the
`AtenSumDimIntListOp`.
* implemented lowering torch.aten.constant_pad_nd to tosa
* add constant_pad_nd e2e tests to TOSA_PASS_SET
* add PadModule_basic & PadWithNoneValModule_basic to TOSA_PASS_SET
---------
Co-authored-by: Lisa Liu <lingl@xilinx.com>
Currently, the op `torch.tensor_static_info_cast` will not get
canonicalized away if the result type has any shape or dtype
information. This is because `isValidSubtype` only returns true when
the tensor types being compared are exactly the same or the supertype
has no shape and dtype information. Being unable to canonicalize away
the `torch.tensor_static_info_cast` gets in the way of further
optimizations, such as shape propagation.
This commit improves `isValidSubtype` by adding logic that compares
the shapes and dtypes of the two tensor types to determine of one type
is indeed a valid subtype of the other.
Fixes https://github.com/llvm/torch-mlir/issues/1926
The current implementation of `getScalarValue` does not check that the
input to a `ValueTensorLiteralOp` is an i64 before extracting the
value, and it does not check that the result type of the
`PrimNumToTensorScalarOp` is also an i64. This leads to crashes or
invalid IR generated when the `input` is something other than an i64
tensor or `!torch.int`.
This commit addresses those issues. In addition, the function
`getScalarValue` is renamed to `getScalarIntValue` to make it clear
that it *only* extracts scalar integers.
The data-flow analysis does not always propagate information to the
entire graph. This results in some lattice elements being
uninitialized. Currently the lattice elements are not checked to see
if they are uninitialized before rewriting the graph, potentially
resulting in invalid IR (see
https://github.com/llvm/torch-mlir/issues/1896).
This commit adds handling for uninitialized lattice elements.
Set PyTorch and TorchVision version to nightly release 2023-02-27.
This commit also adds the lowering for aten.add and aten.Float.Scalar op.
Signed-Off By: Vivek Khandelwal <vivek@nod-labs.com>
Yuanqiang Liu
Jiawei Wu
Matthias Gehre
Alexandre Rames
AyaanShah2204
Ramiro Leal-Cavazos
Chi_Liu
Tiago Trevisan Jost
Zhekun Zhang
Abhishek Varma
Sean Silva
Jiawei Wu
Maksim Levental
Vivek Khandelwal
Christopher McGirr
JianzheXiao
Gaurav Shukla
TatWai Chong
gpetters94
Prashant Kumar
yifei410
Ze Zhang
Eric Kunze
Roll PyTorch Action
Abhishek Varma
Alexandre Rames
Alexandre Rames
Ziheng Jiang
Michael Feliz
lisaliu1
Jiahao Li
Priya Savithiri
Zachary Cetinic