This commit adds the support for index.Tensor op when the index values
are negative. This commit wraps around the index values by checking
their values at run time.
Signed-Off By: Vivek Khandelwal <vivek@nod-labs.com>
Set PyTorch and TorchVision version to nightly release 2023-05-16.
This commit removes the test `BaddbmmDifferentDtypesModule_basic`
since PyTorch expects all operands to have the same dtype.
Ref: 2abad0c184
Signed-Off By: Vivek Khandelwal <vivek@nod-labs.com>
check the return type of the division to figure out whether to use
the floating point implementation of a division or to use the integer.
the issue rose from the fact that the inputs are all integer but the
result was casted to floating point. The conversion then chose to
use the integer implementation of division which is not legal in tosa
when all the inputs get casted to floating point.
fix(TorchToLinalg): AtenDivScalarOp
upcast self operand as well if applicable, the self operand must also
be casted to float as it can be an integer.
* add support for mhlo
* Add Test for torch.ne
* fix torch.ne shape/add static test case
* add support for static torch.ne
---------
Co-authored-by: root <root@n31-177-039.byted.org>
The `copy_` op being replaced by `RecomposeSliceCopy_` operates on a
subset of the tensor being mutated, while the `index_put` op being
used to replace the `copy_` op operates on the entire tensor being
mutated. This means that the result type of the `index_put` should be
the type of the input to `index_put` and we need to make sure that
`copy_` does not have users before replacing to avoid type conflicts.
This commit also fixes the result type used for the
`AtenArangeStartStepOp`, and an off-by-1 error when creating the
indices vector.
Lastly, this commit also clamps the `end` value from the slice to the
size of the dimension.
Before inlining a global slot, the users of the global slot are
checked to see if they are `ReadOnly` or `MemoryEffectFree` to make
sure that the global slot is not being mutated. Because the op
`copy.to_vtensor` currently does not have the `ReadOnly` trait, if a
global slot is passed to `copy.to_vtensor`, the pass
`InlineGlobalSlots` will fail.
The op `copy.to_vtensor` is `ReadOnly`, since it does not modify the
contents of the input tensor; it simply makes a new copy. This commit
adds the trait as well as an e2e test that generates the case of a
global slot being passed to a `copy.to_vtensor`.
* feat: split pytorch requirements into stable and nightly
* fix: add true to tests to see full output
* refactor: add comments to explain true statement
* feat: move some tests to experimental mode
* refactor: refactor pipeline into more fine grained difference
* feat: add version differentiation for some tests
* feat: activate more configs
* refactor: change implementation to use less requirement files
* refactor: remove contraints used for testing
* fix: revert some requirement file names
* refactor: remove unnecessary ninja install
* fix: fix version parsing
* refactor: remove dependency on torchvision in main requirements file
* refactor: remove index url
* style: remove unnecesary line switch
* fix: readd index url
This commit adds dtype functions for all the torch ops that did not
previously have one and removes the pass `RefineTypes`, since the
abstract interpretation library now takes care of all the dtype
propagation.
All dtype functions added are tested except for
- `aten.embedding`
- `aten._embedding_bag`
- `aten.embedding_bag`
These functions need a change to the testing framework to allow
specifying the actual data inside the tensor used for testing. I will
fix this in a follow up patch.
Co-authored-by: Jiahao Li <liplus17@163.com>
Add support for lowering torch.aten.cat to tosa.concat
* add support for aten cat to tosa
---------
Co-authored-by: yifei <y.zhou@xilinx.com>
Co-authored-by: Lisa Liu <lingl@xilinx.com>
When the user does not specify the `stride` value in 2d pooling ops,
`stride` is given the value of an empty list. However, the current
lowerings for pooling ops assumed that the `stride` operand would
always be a list of two ints, leading to crashes when that was not the
case. This commit fixes the crashes by setting the value of `stride`
to `kernel_size` when `stride` is the empty list, since this is the
default `stride` value specified in PyTorch docs. See:
https://pytorch.org/docs/stable/generated/torch.nn.MaxPool2d.html#torch.nn.MaxPool2d
Bool tensors are represented in TorchScript as an array of
`int8_t`s. However, when importing them into Torch-MLIR, the importer
was assuming the array had `int32_t` elements, leading to the importer
reading into memory that was out of bounds. This commit fixes the
casting of the bool tensor.
The current decomposition for `aten.randn.generator` does not specify
the `dtype` argument of the empty tensors created to store the random
values. This leads to invalid IR when the output type of the `randn`
op is not the default PyTorch dtype.
-- In Python we have the concept of negative dimension indexing.
-- We would want to normalize such dimensions to be +ve and within the
expected range instead.
-- This commit takes care of a few remaining set of Ops and their
lowerings by applying `toPositiveDim` and `isValidDim` to the
extracted integer `dim` value.
Signed-off-by: Abhishek Varma <abhishek@nod-labs.com>
-- This commit adds e2e support for atend.sort op.
-- 1. Adds aten.sort op in torch dialect.
-- 2. Adds tm_tensor.sort op in TMTensor dialect.
-- 3. Adds lowering of aten.sort -> tm_tensor.sort.
Signed-off-by: Abhishek Varma <abhishek@nod-labs.com>
-- This commit adds e2e support for aten.randint by decomposing it into
an aten.randint.low by setting low=0.
Signed-off-by: Abhishek Varma <abhishek@nod-labs.com>
This commits adds the support for cases for index_put_op:
1.) where index is a 2-d tensor.
2.) where indices is a list of tensors and none, with exactly
2 non none tensors along the consecutive dimensions.
This commit also adds a utility to compute the broadcast shape
given the two input tensors.
Signed-Off By: Vivek Khandelwal <vivek@nod-labs.com>
This commit also adds the support for non-unit output padding in the
case of transposed convolution.
Signed-Off By: Vivek Khandelwal<vivek@nod-labs.com>
This commit adds the ability to specify extra abstract interpretation
functions in `torch_mlir.compile` to use during type refinement. This
allows users to easily add custom ops without having to interact with
MLIR or C++ directly.
The ops `aten.convolution_overrideable` and
`aten.convolution_backward_overrideable` are currently not e2e tested
in Torch-MLIR. Moreover, there is no way to add e2e tests for them
because the ops cannot be called using the CPU backend (this also
prevents adding tested dtype functions for these ops). Since these two
ops are not expected to ever appear in PyTorch traces obtained through
standard means (https://github.com/pytorch/pytorch/issues/97481),
Torch-MLIR should not have to worry about them.
There are several ops that have their shape function upstream and had
not been updated in Torch-MLIR to use the upstream version. This
commit updates those shape function. In addition, TODOs have been
added for shape functions that should be upstream but are not.
The original design for the dtype functions outlined in
https://github.com/llvm/torch-mlir/issues/1462 was unable to properly
handle ops that take optional tensors as an input when the optional
tensor has a value of None. By the time the op gets imported into
torch-mlir, if an optional value is None, all information about the
original type is lost from the op type signature, preventing
torch-mlir from knowing if a value of None was from an optional tensor
or not, which was crucial in the original design since each tensor
argument must be turned into two separate arguments for the dtype
function.
This commit changes the interface to dtype functions such that each
tensor turns into a tuple of two ints, the first representing the rank
of the tensor and the second the dtype of the tensor. Since now there
is a one-to-one correspondence between the operands of an op and the
operands of its dtype function, there is no ambiguity about which
operand of the op corresponds with which operand of the dtype
function.
To test the implementation, this commit defines dtype function for
convolution op, which takes one optional tensor as an argument.
* implemented ceil_mode== true support for lowering aten.max_pool2d to tosa
* add e2e test for lowering aten.max_pool2d to tosa with ceil_mode=true
---------
Co-authored-by: Lisa Liu <lingl@xilinx.com>
The current implementation of `getScalarValue` does not check that the
input to a `ValueTensorLiteralOp` is an i64 before extracting the
value, and it does not check that the result type of the
`PrimNumToTensorScalarOp` is also an i64. This leads to crashes or
invalid IR generated when the `input` is something other than an i64
tensor or `!torch.int`.
This commit addresses those issues. In addition, the function
`getScalarValue` is renamed to `getScalarIntValue` to make it clear
that it *only* extracts scalar integers.
Set PyTorch and TorchVision version to nightly release 2023-02-27.
This commit also adds the lowering for aten.add and aten.Float.Scalar op.
Signed-Off By: Vivek Khandelwal <vivek@nod-labs.com>
Random tensors used in e2e tests should be created using the
`TestUtils` object passed to the registered test case to ensure that
the compiled module and the golden trace receive the same tensors as
input. This commit changes all the cases of `torch.rand` and
`torch.randn` to use the `TestUtils` instead.
This patch replaces all MHLO operations with their StableHLO
counterparts and adds a validation pass to ensure that no MHLO operations
remain before translating all Stablehlo operations to the MHLO dialect
for further lowering to the Linalg dialect.
This patch also updates all lit tests so that they refer to the
`convert-torch-to-stablehlo` pass and so that they check for StableHLO
operations.
Week of 01/30/2023:
Green LLVM commit: e31ee6417c33a6e2f0e8440b1a86d5365279ad68
Green MHLO commit: c2a6f4064d426567b9ef7b0d29d5ab86dc7b2b02 (branch greencommit/2023-01-30-e31ee641)
This commit replaces the `tanh` dtype function, which was being used
to test the implementation of dtype functions in
a710237437, with a dtype function for
`expm1`. The dtype function for `expm1` is identical to the `tanh`
one, so the same level of testing is maintained.
Currently, there are ops getting dtype information from the
`RefineTypes` pass and ops getting dtype information from the
`TorchDtypeRefinementPipeline`. Since each pass can only propagete
dtype information for the ops it knows how to handle, some models with
many ops handled in both passes require the two dtype propagation
passes to execute many times, reaching the iteration limit set in the
`LowerToBackendContractPass`. To temporarily avoid this issue while
the migration to `TorchDtypeRefinementPipeline` is finished, this
commit switches `tanh` to `expm1`, since the latter is used a lot less
in large models.
This reverts commit eaab9be207, since it
is causing the post-merge CI tests to fail, causing subsequent PRs to be
blocked. Specifically, the tests
`ElementwiseAtenLogicalAndOpPromoteBroadcastModule_basic` and
`ElementwiseAtenLogicalXorOpPromoteBroadcastModule_basic` fail because
the oracle does not match the computed result. This patch reverts the
commit to make the post-merge builds green again.
This commit adds support for passing to `torch_mlir.compile` the
result of running `torch.jit.trace` on a model by relaxing the
condition that checks if the model is already in JIT IR to allow any
`torch.jit.ScriptModule`.
Fixes https://github.com/llvm/torch-mlir/issues/1739
-- The dtype of the result of `aten.embedding` should match that of
the `weight` operand's (operand[0]) instead of hardcoding to f32.
-- This commit aims to provide a fix for the same.
Signed-off-by: Abhishek Varma <abhishek@nod-labs.com>
pytorch/pytorch@140a3139 reverted a change from yesterday, causing the
RollPyTorch action to break. This patch reverts the corresponding
change in the torch-mlir LTC code.
This patch also re-enables tests that were previously marked as XFAIL.
As [@ezyang suggested](https://github.com/pytorch/pytorch/issues/90276#issuecomment-1339791275),
use `torch._dynamo.optimizations.training.aot_autograd` instead of raw
`make_fx`. This is more future proof and gives us the backward pass and
functionalization. We don't currently get functionalization because of
https://github.com/pytorch/pytorch/issues/90759
This also incidentally fixes the source location handling, which makes
`lockstep_basic.py` give an accurate source location!
* [custom op] Generalize shape library logic to work with dtypes
This commit generalizes the shape library logic, so that dtype rules
for ops can also be expressed using the same mechanism. In other
words, each op can now have a shape function and a dtype function
specified in Python that is imported during lowering to calculate the
shapes and dtypes throught a program. For more information about how
to specify a dtype function, see the updated
`docs/adding_a_shape_and_dtype_function.md`.
For those not familiar with how the shape library works, the file
`docs/calculations_lib.md` provides an overview.
This was an experimental attempt at rolling out own op-by-op executor
with `__torch_dispatch__`, but it proved difficult to make it robust.
Op-by-op execution is very easy to implement robustly now with the
PyTorch 2.0 stack, so we don't need eager_mode.
Downstream users were using eager_mode to implement lockstep numerical
accuracy debuggers. We implemented the same functionality with
TorchDynamo in https://github.com/llvm/torch-mlir/pull/1681 so now there
is not much reason to continue maintaining it.
This gives some decent improvements to memory consumption and latency of
testing. I would have expected buffer-deallocation to actually make a
big difference to the final process RSS but it doesn't appear to. Also
running buffer-deallocation later in the pipeline results in
miscompiles. I didn't have the time or interest to dig in deeper, but
something is off.
(numbers below are taken from a single run, but I did do a few runs to make
sure that the variance wasn't that great)
- Linalg-on-Tensors shows memory consumption improvements and some slight speedups.
```
./tools/e2e_test.sh -s -v -c refbackend
fuse=0 dealloc=0
RSS: 3071.33 MB
real 3m58.204s
user 6m22.299s
sys 0m51.235s
fuse=1 dealloc=0
RSS: 2515.89 MB
real 3m34.797s
user 5m56.902s
sys 0m44.933s
fuse=1 dealloc=post-bufferize:
RSS: 2290.25 MB
real 3m42.242s
user 6m0.560s
sys 0m46.335s
```
- TOSA ResNet18 gets significantly faster and uses significantly less memory.
```
time ./tools/e2e_test.sh -s -v -c tosa -f ResNet18
fuse=0 dealloc=0
rss 1328.56 MB
real 0m50.303s
user 0m55.355s
sys 0m12.260s
fuse=1 dealloc=0
rss 859MB
real 0m30.454s
user 0m35.551s
sys 0m11.879s
fuse=1 dealloc=post-bufferize:
rss 851MB
real 0m30.313s
user 0m39.889s
sys 0m11.941s
```
Big thanks to Ramiro for the methodology here for measuring the RSS with
`psutil`:
https://gist.github.com/ramiro050/5b5c2501f7389c008d9029210772c3a8
- Support for non-prefixed accessors has been removed. See:
https://reviews.llvm.org/D136727
- Rename `operands` to `methodOperands` in `prim.CallMethod` since the
name `operands` overlaps with a builtin method name. See:
https://reviews.llvm.org/D136727
- Add passes in refbackend to lower memref.subview. See:
https://reviews.llvm.org/D136377
- Replace `CopyToValueTensorOps` first in `RewriteViewLikeSubgraph` in
maximize-value-semantics.
The current implementation of the `RewriteViewLikeSubgraph` pass in
maximize-value-semantics creates temporarily invalid IR. In
particular, given a forward slice starting from a
`CopyToNonValueTensorOp` and ending in `CopyToValueTensorOp`s, the
pass first replaces all uses of the `CopyToNonValueTensorOp` with
its operand, which results in all the `CopyToValueTensorOp` users
having their operand have type `!torch.vtensor`, which is invalid.
The correct way to do things is to first replace all the
`CopyToValueTensorOp`s with their operand, and then replace all uses
of the `CopyToNonValueTensorOp` with its operand.
This only started failing now because the generated accessor
`getOperand` for the `CopyToValueTensorOp` now returns a
`TypedValue<NonValueTensorType>`, which has an assert checking that
the value returned is of the expected type.
This is a minor variation on our other resnet18 examples swapping in
TorchDynamo.
We replicate the refbackend_torchdynamo_backend out of the e2e test
config to avoid making that appear like a public API.
Also, some minor cleanups to TorchDynamoTestConfig.
This test has been disabled a long time, and since RefBackend is so slow
we don't want to add this unnecessarily. I believe it is covered by
downstream testing such as the Shark Tank.
Thanks to TorchDynamo's great layering and design, this is only about
100 lines of code for a basic lockstep debugger.
This should allow us to deprecate eager_mode, since AFAIK the only
interesting use case that it was really supporting is for downstream users to
write lockstep debuggers.
NOTE: The exact reporting and interface here is subject to change. Please
try it out and provide feedback (or patches :) ).
- make_fx should not drop source locations: https://github.com/pytorch/pytorch/issues/90276
- Report tensors better (huge tensors should be summarized)
- Maybe don't abort, but just warn?
- Allow customizing atol/rtol.
- How best to print the failing node? And include surrounding graph
context?
This commit changes the `InsertRngGlobalsPass` to `TorchConversionToMLProgram`
pass. This commit also adds the `MLProgramBufferize` pass for the
bufferization of ml_program dialect ops to run on refbackend.
Signed-Off By: Vivek Khandelwal<vivek@nod-labs.com>
This commit replaces the LCG algorithm that was being used by the
`TorchToLinalg` lowering of `AtenUniformOp` to generate random numbers
with the `squares64` algorithm, for the LCG algorithm was producing
tensors that were highly correlated with one another.
Squares64 algorithm: https://arxiv.org/abs/2004.06278
Closes https://github.com/llvm/torch-mlir/issues/1608
The current implementation sets the `nextSeed` value to `temp & 127`,
which is wrong. The last step of the LCG algorithm for the multiplier
and increment chosen should be `temp % 2^{64} = temp & (1 <<
63)`. However, because we are dealing with i64 values, the modulus
operation happens automatically, so it is not needed.
See Donald Knuth's values for LCG here:
https://en.wikipedia.org/wiki/Linear_congruential_generator
There are a few e2e tests that take several very large tensors as
input, which leads to the e2e test suite leaking too much
memory. Running things locally resulted in a total memory usage of
12.5 GB when running the suite sequentially on the refbackend.
Many of the tests that take large tensors don't actually need
such large tensors to pass, and some that take several large tensors
as input are just doing the same thing multiple times. This commit
reduces the size of some of the tensors and removes repetitive parts
of tests to reduce the memory usage to a total of 3 GB.
`np.bool is bool` and will never be returned as a dtype of an
`np.ndarray`, so we don't need to handle it here.
```
>>> a = np.ndarray([1], dtype=bool)
>>> a.dtype.type is np.bool_
True
```
More info here:
https://numpy.org/devdocs/release/1.20.0-notes.html#deprecations
For reasons that I haven't yet fully tracked down, the TorchDynamo
TestConfig seems to result in tensors that cannot be pickled. They seem
to be holding some sort of weak handles to a `torch.fx.graph.Graph`.
Here is the object structure that leads to the unpickleable object:
```
(<function _rebuild_tensor_v2 at 0x7f56346d56c0>, <class 'torch.Tensor'>, ( 1.0...
{<object object at 0x7f557529e6b0>: <WeakKeyDictionary at 0x7f556a3efbb0>}
{'data': {<weakref at 0x7f5615372ed0; to 'PythonKeyTracer' at 0x7f556a3ee5c0>: _...
<class 'torch.fx.graph.Graph'>
<class 'torch._ops.OpOverloadPacket'>
TypeError("cannot pickle 'torch._C.FunctionSchema' object")
```
Upstream bug filed: https://github.com/pytorch/pytorch/issues/89626
This adds a basic e2e Config for TorchDynamo using
Linalg-on-Tensors/RefBackend.
But TorchDynamo is pretty orthogonal to
various other pieces, so it should compose nicely with variations like:
- Switching out all the backends (Linalg-on-Tensors, TOSA, MHLO)
- PyTorch functionalization and decompositions
- Taking the example inputs and compiling with all dynamic or all static
shapes without duplicating tests.
This adds it to the CI, but there are still a lot of XFAIL's.
This also adds a helper `from torch_mlir.dynamo import
make_simple_dynamo_backend` which simplifies some of the steps for
making a Torch-MLIR-based TorchDynamo backend. We include "simple" in
the name because we are going to be exploring various things next from
the long-term roadmap.
The next steps are:
- Burn down all the XFAIL's.
- Start working on the pieces from the [long-term roadmap](https://github.com/llvm/torch-mlir/blob/main/docs/long_term_roadmap.md).
- Add functionalization/decompositions into the TorchDynamo flow and
remove reliance on the current Torch-MLIR "frontend".
- Write a pure-Python direct FX->MLIR importer.
- Hook up the new PyTorch symbolic shape stuff.
- Explore PrimTorch decompositions for simplifying backends.
This commit fixes the aten.mean and aten.mean.dim op decomposition
for supporting large-sized inputs.
This commit also fixes the formatting for the file stats.py
Signed-Off By: Vivek Khandelwal<vivek@nod-labs.com>
The purpose of the test suite is to accelerate the development of the
compiler. However, we had various tests there that were not expected to
work, had no in-progress work being tested by the test, and nobody was
actively working on them. Having such tests in our test suite just adds
clutter and slows down development on the compiler.
-- aten.upsample_nearest2d.vec op is not present
owing to https://github.com/pytorch/pytorch/pull/85638
-- So this commit adds a lowering on aten.upsample_nearest2d.
Signed-off-by: Abhishek Varma <abhishek@nod-labs.com>
For AoT deployments models often have multiple exported methods.
This patch enables something like this:
```
class TwoMethodsModule(torch.nn.Module):
def sin(self, x):
return torch.ops.aten.sin(x)
def cos(self, x):
return torch.ops.aten.cos(x)
example_args = torch_mlir.ExampleArgs()
example_args.add_method("sin", torch.ones(2, 3))
example_args.add_method("cos", torch.ones(2, 4))
print(torch_mlir.compile(TwoMethodsModule(), example_args))
```
In the
[long-term](https://github.com/llvm/torch-mlir/blob/main/docs/long_term_roadmap.md#tools-for-advanced-aot-deployments)
we will need to reconcile this with our story for stateful models and the
backend contract being purely functional. For now, this provides some basic
infra that seems harmless. Arguably, we could tighten up the backend contract
even more to only allow a single compiled function which would prohibit this or
require building out a layer above.
Fixes#1557
Unless requested otherwise, PyTorch no longer installs most of the
header files under the caffe2 directory (see
https://github.com/pytorch/pytorch/pull/87986). This breaks our
importer code since we need to use the `MakeGuard()` function to execute
statements in the event of exceptions.
To fix this issue, this patch implements a rudimentary version of
PyTorch's ScopeGuard, where once the class variable goes out of scope,
it executes a predefined method.
Yuanqiang Liu
Abhishek Varma
Vivek Khandelwal
Maksim Levental
Christopher McGirr
Tiago Trevisan Jost
Matthias Gehre
JianzheXiao
Ramiro Leal-Cavazos
Zhekun Zhang
maxbartel
Gaurav Shukla
Prateek Gupta
gpetters94
David Gens
Prashant Kumar
rahul shrivastava
yifei410
Ze Zhang
Abhishek Varma
rahuls-cerebras
Chi_Liu
lisaliu1
Sean Silva
Jiahao Li
Ziheng Jiang
Eric Kunze
Priya Savithiri
Prateek Gupta
Zachary Cetinic
Zachary Cetinic
Ashay Rane
Gleb Kazantaev
Srirammaswamy
Shivam Gupta
Chi_Liu
Jae Hoon (Antonio) Kim
ataheridezfouli-groq
Ahmed S. Taei
Tanyo Kwok
Daniel Ellis
Xiafei Qiu