#-------------------------------------------------------------------------------
# Project setup and globals
#-------------------------------------------------------------------------------

cmake_minimum_required(VERSION 3.12)

if(POLICY CMP0068)
  cmake_policy(SET CMP0068 NEW)
  set(CMAKE_BUILD_WITH_INSTALL_NAME_DIR ON)
endif()

if(POLICY CMP0075)
  cmake_policy(SET CMP0075 NEW)
endif()

if(POLICY CMP0077)
  cmake_policy(SET CMP0077 NEW)
endif()

if(POLICY CMP0116)
  cmake_policy(SET CMP0116 OLD)
endif()

project(torch-mlir LANGUAGES CXX C)
set(CMAKE_C_STANDARD 11)
set(CMAKE_CXX_STANDARD 17)

include(CMakeDependentOption)

#-------------------------------------------------------------------------------
# Project options
#-------------------------------------------------------------------------------

option(TORCH_MLIR_USE_INSTALLED_PYTORCH "If depending on PyTorch use it as installed in the current Python environment" ON)

option(TORCH_MLIR_ENABLE_REFBACKEND "Enable reference backend" ON)
if(TORCH_MLIR_ENABLE_REFBACKEND)
  add_definitions(-DTORCH_MLIR_ENABLE_REFBACKEND)
endif()

option(TORCH_MLIR_ENABLE_STABLEHLO "Add stablehlo dialect" ON)
if(TORCH_MLIR_ENABLE_STABLEHLO)
  add_definitions(-DTORCH_MLIR_ENABLE_STABLEHLO)
endif()

option(TORCH_MLIR_OUT_OF_TREE_BUILD "Specifies an out of tree build" OFF)

# PyTorch native extension gate. If OFF, then no features which depend on
# native extensions will be built.
option(TORCH_MLIR_ENABLE_PYTORCH_EXTENSIONS "Enables PyTorch native extension features" ON)
cmake_dependent_option(TORCH_MLIR_ENABLE_JIT_IR_IMPORTER "Enables JIT IR Importer" ON TORCH_MLIR_ENABLE_PYTORCH_EXTENSIONS OFF)
cmake_dependent_option(TORCH_MLIR_ENABLE_LTC "Enables LTC backend" OFF TORCH_MLIR_ENABLE_PYTORCH_EXTENSIONS OFF)

#-------------------------------------------------------------------------------
# Configure out-of-tree vs in-tree build
#-------------------------------------------------------------------------------

if(CMAKE_SOURCE_DIR STREQUAL CMAKE_CURRENT_SOURCE_DIR OR TORCH_MLIR_OUT_OF_TREE_BUILD)
  message(STATUS "Torch-MLIR out-of-tree build.")
  # Out-of-tree build

  #-------------------------------------------------------------------------------
  # MLIR/LLVM Configuration
  #-------------------------------------------------------------------------------

  find_package(MLIR REQUIRED CONFIG)
  message(STATUS "Using MLIRConfig.cmake in: ${MLIR_DIR}")
  message(STATUS "Using LLVMConfig.cmake in: ${LLVM_DIR}")

  set(LLVM_RUNTIME_OUTPUT_INTDIR ${CMAKE_BINARY_DIR}/bin)
  set(LLVM_LIBRARY_OUTPUT_INTDIR ${CMAKE_BINARY_DIR}/lib)

  set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib)
  set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin)

  # Define the default arguments to use with 'lit', and an option for the user to
  # override.
  set(LIT_ARGS_DEFAULT "-sv")
  if (MSVC_IDE OR XCODE)
    set(LIT_ARGS_DEFAULT "${LIT_ARGS_DEFAULT} --no-progress-bar")
  endif()
  set(LLVM_LIT_ARGS "${LIT_ARGS_DEFAULT}" CACHE STRING "Default options for lit")

  list(APPEND CMAKE_MODULE_PATH "${MLIR_CMAKE_DIR}")
  list(APPEND CMAKE_MODULE_PATH "${LLVM_CMAKE_DIR}")
  include(TableGen)
  include(AddLLVM)
  include(AddMLIR)
  include(HandleLLVMOptions)

  # Don't try to compile the python extensions at the moment. We need
  # to import lots of dependencies from AddMLIRPython to make this work.
  set(MLIR_ENABLE_BINDINGS_PYTHON ON)

  set(TORCH-MLIR_BUILT_STANDALONE ON)
  set(BACKEND_PACKAGE_STRING "LLVM ${LLVM_PACKAGE_VERSION}")
else()
  message(STATUS "Torch-MLIR in-tree build.")
  # In-tree build with LLVM_EXTERNAL_PROJECTS=torch-mlir

  option(MLIR_ENABLE_BINDINGS_PYTHON "Enables MLIR Python Bindings" OFF)

  # TODO: Fix this upstream so that global include directories are not needed.
  set(MLIR_MAIN_SRC_DIR ${LLVM_MAIN_SRC_DIR}/../mlir)
  set(MLIR_INCLUDE_DIR ${LLVM_MAIN_SRC_DIR}/../mlir/include)
  set(MLIR_GENERATED_INCLUDE_DIR ${LLVM_BINARY_DIR}/tools/mlir/include)
  set(MLIR_INCLUDE_DIRS "${MLIR_INCLUDE_DIR};${MLIR_GENERATED_INCLUDE_DIR}")
endif()

if (TORCH_MLIR_ENABLE_STABLEHLO)
  include_directories(${CMAKE_CURRENT_SOURCE_DIR}/externals/stablehlo)
endif()

set(TORCH_MLIR_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}")
set(TORCH_MLIR_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}")
message(STATUS "Building torch-mlir project at ${TORCH_MLIR_SOURCE_DIR} (into ${TORCH_MLIR_BINARY_DIR})")

include_directories(${LLVM_INCLUDE_DIRS})
include_directories(${MLIR_INCLUDE_DIRS})
include_directories(${CMAKE_CURRENT_SOURCE_DIR}/include)
include_directories(${CMAKE_CURRENT_BINARY_DIR}/include)

function(torch_mlir_target_includes target)
  set(_dirs
    $<BUILD_INTERFACE:${MLIR_INCLUDE_DIRS}>
    $<BUILD_INTERFACE:${TORCH_MLIR_SOURCE_DIR}/include>
    $<BUILD_INTERFACE:${TORCH_MLIR_BINARY_DIR}/include>
  )
  # In LLVM parlance, the actual target may just be an interface and may not
  # be responsible for actually compiling anything. The corresponding obj.
  # target, when present, is just used for compilation and does not
  # contribute to the interface properties.
  # TODO: Normalize this upstream.
  target_include_directories(${target} PUBLIC ${_dirs})
  if(TARGET obj.${target})
    target_include_directories(obj.${target} PRIVATE ${_dirs})
  endif()
endfunction()

# Configure CMake.
list(APPEND CMAKE_MODULE_PATH ${MLIR_MAIN_SRC_DIR}/cmake/modules)
list(APPEND CMAKE_MODULE_PATH ${LLVM_MAIN_SRC_DIR}/cmake)
list(APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/build_tools/cmake)

include(TableGen)
include(AddLLVM)
include(AddMLIR)
include(AddMLIRPython)

################################################################################
# Setup python.
################################################################################

if(MLIR_ENABLE_BINDINGS_PYTHON)
  include(MLIRDetectPythonEnv)
  mlir_configure_python_dev_packages()
endif()

add_subdirectory(include)
add_subdirectory(lib)
add_subdirectory(tools)

add_custom_target(check-torch-mlir-all)
add_dependencies(check-torch-mlir-all check-torch-mlir)

if(MLIR_ENABLE_BINDINGS_PYTHON)
  # If parent projects want to configure where to place the python packages,
  # respect that.
  if(NOT TORCH_MLIR_PYTHON_PACKAGES_DIR)
    set(TORCH_MLIR_PYTHON_PACKAGES_DIR "${CMAKE_CURRENT_BINARY_DIR}/python_packages")
  endif()
endif()

add_subdirectory(test)

if (NOT LLVM_INSTALL_TOOLCHAIN_ONLY)
  install(DIRECTORY include/torch-mlir include/torch-mlir-c
          DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}"
          COMPONENT torch-mlir-headers
          FILES_MATCHING
          PATTERN "*.def"
          PATTERN "*.h"
          PATTERN "*.inc"
          PATTERN "*.td"
          PATTERN "LICENSE.TXT"
          )

  install(DIRECTORY ${TORCH_MLIR_BINARY_DIR}/include/torch-mlir
          DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}"
          COMPONENT torch-mlir-headers
          FILES_MATCHING
          PATTERN "*.def"
          PATTERN "*.h"
          PATTERN "*.gen"
          PATTERN "*.inc"
          PATTERN "*.td"
          PATTERN "CMakeFiles" EXCLUDE
          PATTERN "config.h" EXCLUDE
          )

  if (NOT LLVM_ENABLE_IDE)
    add_llvm_install_targets(install-torch-mlir-headers
            DEPENDS torch-mlir-headers
            COMPONENT torch-mlir-headers)
  endif()
endif()

# Important: If loading StableHLO in this fashion, it must come last,
# after all of our libraries and test targets have been defined.
# It seems that they both abuse upstream CMake macros that accumulate
# properties.
# Getting this wrong results in building large parts of the stablehlo
# project that we don't actually depend on. Further some of those parts
# do not even compile on all platforms.
if (TORCH_MLIR_ENABLE_STABLEHLO)
  set(STABLEHLO_BUILD_EMBEDDED ON)
  add_subdirectory(${CMAKE_CURRENT_SOURCE_DIR}/externals/stablehlo
    ${CMAKE_CURRENT_BINARY_DIR}/stablehlo
    EXCLUDE_FROM_ALL)
  include_directories(${CMAKE_CURRENT_SOURCE_DIR}/externals/stablehlo)
endif()

#-------------------------------------------------------------------------------
# Sub-projects
#-------------------------------------------------------------------------------

# Sub-projects can bundle additional PyTorch extensions by adding them to this
# source target. It is typically empty unless if features are enabled.
if(MLIR_ENABLE_BINDINGS_PYTHON)
  declare_mlir_python_sources(TorchMLIRPythonTorchExtensionsSources)
endif()

# Build projects first as it may populate additional Python deps.
add_subdirectory(projects)

# Finish with top-level Python bindings so it can handle additional deps.
if(MLIR_ENABLE_BINDINGS_PYTHON)
  add_subdirectory(python)
endif()