From 6c530cd69a13ade454246b341df43a49d17964b7 Mon Sep 17 00:00:00 2001 From: mack-a <57424792+mack-a@users.noreply.github.com> Date: Thu, 14 Jan 2021 17:28:13 +0800 Subject: [PATCH] =?UTF-8?q?feat(=E9=87=8D=E6=9E=84):=20=E9=87=8D=E6=9E=84?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- install.sh | 4396 ++++++++++++++++++++++++---------------------------- 1 file changed, 2044 insertions(+), 2352 deletions(-) diff --git a/install.sh b/install.sh index 9a5daa8..bd99ccc 100644 --- a/install.sh +++ b/install.sh @@ -2,261 +2,233 @@ # 检测区 # ------------------------------------------------------------- # 检查系统 -checkSystem(){ - if [[ ! -z `find /etc -name "redhat-release"` ]] || [[ ! -z `cat /proc/version | grep -i "centos" | grep -v grep ` ]] - then - centosVersion=`rpm -q centos-release|awk -F "[-]" '{print $3}'|awk -F "[.]" '{print $1}'` - if [[ -z "${centosVersion}" ]] && [[ ! -z `cat /etc/centos-release|grep "release 8"` ]] - then - centosVersion=8 - fi +checkSystem() { + if [[ -n $(find /etc -name "redhat-release") ]] || grep /dev/null 2>&1 - rm -f /etc/systemd/system/v2ray.service - elif [[ "$1" = "xrayClean" ]] - then - rm -rf `ls /etc/v2ray-agent/xray|egrep -v '(config_full.json|conf)'` - handleXray stop > /dev/null 2>&1 - rm -f /etc/systemd/system/xray.service +cleanUp() { + if [[ "$1" == "v2rayClean" ]]; then + rm -rf "$(find /etc/v2ray-agent/v2ray/* | grep -E '(config_full.json|conf)')" + handleV2Ray stop >/dev/null 2>&1 + rm -f /etc/systemd/system/v2ray.service + elif [[ "$1" == "xrayClean" ]]; then + rm -rf "$(find /etc/v2ray-agent/xray/* | grep -E '(config_full.json|conf)')" + handleXray stop >/dev/null 2>&1 + rm -f /etc/systemd/system/xray.service - elif [[ "$1" = "v2rayDel" ]] - then - rm -rf /etc/v2ray-agent/v2ray/* + elif [[ "$1" == "v2rayDel" ]]; then + rm -rf /etc/v2ray-agent/v2ray/* - elif [[ "$1" = "xrayDel" ]] - then - rm -rf /etc/v2ray-agent/xray/* - fi + elif [[ "$1" == "xrayDel" ]]; then + rm -rf /etc/v2ray-agent/xray/* + fi } initVar $1 @@ -265,310 +237,272 @@ readInstallType readInstallProtocolType readConfigHostPathUUID - # ------------------------------------------------------------- -echoContent(){ - case $1 in - # 红色 - "red") - ${echoType} "\033[31m${printN}$2 \033[0m" - ;; - # 天蓝色 - "skyBlue") - ${echoType} "\033[1;36m${printN}$2 \033[0m" - ;; - # 绿色 - "green") - ${echoType} "\033[32m${printN}$2 \033[0m" - ;; - # 白色 - "white") - ${echoType} "\033[37m${printN}$2 \033[0m" - ;; - "magenta") - ${echoType} "\033[31m${printN}$2 \033[0m" - ;; - "skyBlue") - ${echoType} "\033[36m${printN}$2 \033[0m" - ;; - # 黄色 - "yellow") - ${echoType} "\033[33m${printN}$2 \033[0m" - ;; - esac +echoContent() { + case $1 in + # 红色 + "red") + # shellcheck disable=SC2154 + ${echoType} "\033[31m${printN}$2 \033[0m" + ;; + # 天蓝色 + "skyBlue") + ${echoType} "\033[1;36m${printN}$2 \033[0m" + ;; + # 绿色 + "green") + ${echoType} "\033[32m${printN}$2 \033[0m" + ;; + # 白色 + "white") + ${echoType} "\033[37m${printN}$2 \033[0m" + ;; + "magenta") + ${echoType} "\033[31m${printN}$2 \033[0m" + ;; + # 黄色 + "yellow") + ${echoType} "\033[33m${printN}$2 \033[0m" + ;; + esac } # 初始化安装目录 -mkdirTools(){ - mkdir -p /etc/v2ray-agent/tls - mkdir -p /etc/v2ray-agent/v2ray/conf - mkdir -p /etc/v2ray-agent/xray/conf - mkdir -p /etc/v2ray-agent/trojan - mkdir -p /etc/systemd/system/ - mkdir -p /tmp/v2ray-agent-tls/ +mkdirTools() { + mkdir -p /etc/v2ray-agent/tls + mkdir -p /etc/v2ray-agent/v2ray/conf + mkdir -p /etc/v2ray-agent/xray/conf + mkdir -p /etc/v2ray-agent/trojan + mkdir -p /etc/systemd/system/ + mkdir -p /tmp/v2ray-agent-tls/ } # 安装工具包 -installTools(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 安装工具" - if [[ "${release}" = "centos" ]] - then - echoContent green " ---> 检查安装jq、nginx epel源、yum-utils、semanage" - # jq epel源 - if [[ -z `command -v jq` ]] - then - rpm -ivh http://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm > /dev/null 2>&1 - fi +installTools() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 安装工具" + if [[ "${release}" == "centos" ]]; then + echoContent green " ---> 检查安装jq、nginx epel源、yum-utils、semanage" + # jq epel源 + if [[ -z $(command -v jq) ]]; then + rpm -ivh http://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm >/dev/null 2>&1 + fi - nginxEpel="" - if [[ ! -z `rpm -qa|grep -v grep|grep nginx` ]] - then - local nginxVersion=`rpm -qa|grep -v grep|grep nginx|head -1|awk -F '[-]' '{print $2}'`; - if [[ `echo ${nginxVersion}|awk -F '[.]' '{print $1}'` < 1 ]] && [[ `echo ${nginxVersion}|awk -F '[.]' '{print $2}'` < 17 ]] - then - rpm -qa|grep -v grep|grep nginx|xargs rpm -e > /dev/null 2>&1 - fi - fi + nginxEpel="" + if rpm -qa | grep -q nginx; then + local nginxVersion + nginxVersion=$(rpm -qa | grep -v grep | grep nginx | head -1 | awk -F '[-]' '{print $2}') + if [[ $(echo "${nginxVersion}" | awk -F '[.]' '{print $1}') -le 1 ]] && [[ $(echo "${nginxVersion}" | awk -F '[.]' '{print $2}') -le 17 ]]; then + rpm -qa | grep -v grep | grep nginx | xargs rpm -e >/dev/null 2>&1 + fi + fi - if [[ "${centosVersion}" = "6" ]] - then - nginxEpel="http://nginx.org/packages/centos/6/x86_64/RPMS/nginx-1.18.0-1.el6.ngx.x86_64.rpm" - rpm -ivh ${nginxEpel} > /etc/v2ray-agent/error.log 2>&1 - elif [[ "${centosVersion}" = "7" ]] - then - nginxEpel="http://nginx.org/packages/centos/7/noarch/RPMS/nginx-release-centos-7-0.el7.ngx.noarch.rpm" - policyCoreUtils="policycoreutils-python.x86_64" - rpm -ivh ${nginxEpel} > /etc/v2ray-agent/error.log 2>&1 - elif [[ "${centosVersion}" = "8" ]] - then - nginxEpel="http://nginx.org/packages/centos/8/x86_64/RPMS/nginx-1.18.0-1.el8.ngx.x86_64.rpm" - policyCoreUtils="policycoreutils-python-utils-2.9-9.el8.noarch" - # rpm -ivh ${nginxEpel} > /etc/v2ray-agent/error.log 2>&1 - fi + if [[ "${centosVersion}" == "6" ]]; then + nginxEpel="http://nginx.org/packages/centos/6/x86_64/RPMS/nginx-1.18.0-1.el6.ngx.x86_64.rpm" + rpm -ivh ${nginxEpel} >/etc/v2ray-agent/error.log 2>&1 + elif [[ "${centosVersion}" == "7" ]]; then + nginxEpel="http://nginx.org/packages/centos/7/noarch/RPMS/nginx-release-centos-7-0.el7.ngx.noarch.rpm" + policyCoreUtils="policycoreutils-python.x86_64" + rpm -ivh ${nginxEpel} >/etc/v2ray-agent/error.log 2>&1 + elif [[ "${centosVersion}" == "8" ]]; then + nginxEpel="http://nginx.org/packages/centos/8/x86_64/RPMS/nginx-1.18.0-1.el8.ngx.x86_64.rpm" + policyCoreUtils="policycoreutils-python-utils-2.9-9.el8.noarch" + # rpm -ivh ${nginxEpel} > /etc/v2ray-agent/error.log 2>&1 + fi - # yum-utils - if [[ "${centosVersion}" = "8" ]] - then - upgrade="yum update -y --skip-broken --nobest" - installType="yum -y install --nobest" - ${installType} yum-utils > /etc/v2ray-agent/error.log 2>&1 - else - ${installType} yum-utils > /etc/v2ray-agent/error.log 2>&1 - fi + # yum-utils + if [[ "${centosVersion}" == "8" ]]; then + upgrade="yum update -y --skip-broken --nobest" + installType="yum -y install --nobest" + ${installType} yum-utils >/etc/v2ray-agent/error.log 2>&1 + else + ${installType} yum-utils >/etc/v2ray-agent/error.log 2>&1 + fi - fi - # 修复ubuntu个别系统问题 - if [[ "${release}" = "ubuntu" ]] - then - dpkg --configure -a - fi + fi + # 修复ubuntu个别系统问题 + if [[ "${release}" == "ubuntu" ]]; then + dpkg --configure -a + fi - if [[ ! -z `ps -ef|grep -v grep|grep apt` ]] - then - ps -ef|grep -v grep|grep apt|awk '{print $2}'|xargs kill -9 - fi + if ps -ef | grep -q apt; then + ps -ef | grep -v grep | grep apt | awk '{print $2}' | xargs kill -9 + fi - echoContent green " ---> 检查、安装更新【新机器会很慢，耐心等待】" + echoContent green " ---> 检查、安装更新【新机器会很慢，耐心等待】" - ${upgrade} > /dev/null - if [[ "${release}" = "centos" ]] - then - rm -rf /var/run/yum.pid - fi + ${upgrade} >/dev/null + if [[ "${release}" == "centos" ]]; then + rm -rf /var/run/yum.pid + fi - if [[ -z `find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin |grep -v grep|grep -w wget` ]] - then - echoContent green " ---> 安装wget" - ${installType} wget > /dev/null 2>&1 - fi + if ! find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin | grep -q wget; then + echoContent green " ---> 安装wget" + ${installType} wget >/dev/null 2>&1 + fi - if [[ -z `find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin |grep -v grep|grep -w curl` ]] - then - echoContent green " ---> 安装curl" - ${installType} curl > /dev/null 2>&1 - fi + if ! find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin | grep -q curl; then + echoContent green " ---> 安装curl" + ${installType} curl >/dev/null 2>&1 + fi - if [[ -z `find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin |grep -v grep|grep -w unzip` ]] - then - echoContent green " ---> 安装unzip" - ${installType} unzip > /dev/null 2>&1 - fi + if ! find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin | grep -q unzip; then + echoContent green " ---> 安装unzip" + ${installType} unzip >/dev/null 2>&1 + fi - if [[ -z `find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin |grep -v grep|grep -w socat` ]] - then - echoContent green " ---> 安装socat" - ${installType} socat > /dev/null 2>&1 - fi + if ! find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin | grep -q socat; then + echoContent green " ---> 安装socat" + ${installType} socat >/dev/null 2>&1 + fi - if [[ -z `find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin |grep -v grep|grep -w tar` ]] - then - echoContent green " ---> 安装tar" - ${installType} tar > /dev/null 2>&1 - fi + if ! find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin | grep -q tar; then + echoContent green " ---> 安装tar" + ${installType} tar >/dev/null 2>&1 + fi - if [[ -z `find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin |grep -v grep|grep cron` ]] - then - echoContent green " ---> 安装crontabs" - if [[ "${release}" = "ubuntu" ]] || [[ "${release}" = "debian" ]] - then - ${installType} cron > /dev/null 2>&1 - else - ${installType} crontabs > /dev/null 2>&1 - fi - fi - if [[ -z `find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin |grep -v grep|grep -w jq` ]] - then - echoContent green " ---> 安装jq" - ${installType} jq > /dev/null 2>&1 - fi + if ! find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin | grep -q cron; then + echoContent green " ---> 安装crontabs" + if [[ "${release}" == "ubuntu" ]] || [[ "${release}" == "debian" ]]; then + ${installType} cron >/dev/null 2>&1 + else + ${installType} crontabs >/dev/null 2>&1 + fi + fi + if ! find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin | grep -q jq; then + echoContent green " ---> 安装jq" + ${installType} jq >/dev/null 2>&1 + fi - if [[ -z `find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin |grep -v grep|grep binutils` ]] - then - echoContent green " ---> 安装binutils" - ${installType} binutils > /dev/null 2>&1 - fi + if ! find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin | grep -q binutils; then + echoContent green " ---> 安装binutils" + ${installType} binutils >/dev/null 2>&1 + fi - if [[ -z `find /bin /usr/sbin /usr/local/bin /usr/local/sbin |grep -v grep|grep ping6` ]] - then - echoContent green " ---> 安装ping6" - ${installType} inetutils-ping > /dev/null 2>&1 - fi + if ! find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin | grep -q ping6; then + echoContent green " ---> 安装ping6" + ${installType} inetutils-ping >/dev/null 2>&1 + fi - if [[ -z `find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin |grep -v grep|grep -w nginx` ]] - then - echoContent green " ---> 安装nginx" - if [[ "${centosVersion}" = "8" ]] - then - rpm -ivh ${nginxEpel} > /etc/v2ray-agent/error.log 2>&1 - else - ${installType} nginx > /dev/null 2>&1 - fi + if ! find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin | grep -q nginx; then + echoContent green " ---> 安装nginx" + if [[ "${centosVersion}" == "8" ]]; then + rpm -ivh ${nginxEpel} >/etc/v2ray-agent/error.log 2>&1 + else + ${installType} nginx >/dev/null 2>&1 + fi - if [[ ! -z "${centosVersion}" ]] - then - systemctl daemon-reload - systemctl enable nginx - fi - fi + if [[ -n "${centosVersion}" ]]; then + systemctl daemon-reload + systemctl enable nginx + fi + fi - if [[ -z `find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin |grep -v grep|grep -w semanage` ]] - then - echoContent green " ---> 安装semanage" - ${installType} bash-completion > /dev/null 2>&1 - if [[ ! -z "${policyCoreUtils}" ]] - then - ${installType} ${policyCoreUtils} > /dev/null 2>&1 - fi - if [[ ! -z `which semanage` ]] - then - semanage port -a -t http_port_t -p tcp 31300 + if ! find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin | grep -q semanage; then + echoContent green " ---> 安装semanage" + ${installType} bash-completion >/dev/null 2>&1 + if [[ -n "${policyCoreUtils}" ]]; then + ${installType} ${policyCoreUtils} >/dev/null 2>&1 + fi + if [[ -n $(which semanage) ]]; then + semanage port -a -t http_port_t -p tcp 31300 - fi - fi + fi + fi - if [[ -z `find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin |grep -v grep|grep -w sudo` ]] - then - echoContent green " ---> 安装sudo" - ${installType} sudo > /dev/null 2>&1 - fi - # todo 关闭防火墙 + if ! find /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin | grep -q sudo; then + echoContent green " ---> 安装sudo" + ${installType} sudo >/dev/null 2>&1 + fi + # todo 关闭防火墙 - if [[ ! -d "/root/.acme.sh" ]] - then - echoContent green " ---> 安装acme.sh" - curl -s https://get.acme.sh | sh > /etc/v2ray-agent/tls/acme.log - if [[ -d "~/.acme.sh" ]] && [[ -z `ls -F ~/.acme.sh/|grep -w "acme.sh"` ]] - then - echoContent red " acme安装失败--->" - echoContent yellow "错误排查：" - echoContent red " 1.获取Github文件失败，请等待GitHub恢复后尝试，恢复进度可查看 [https://www.githubstatus.com/]" - echoContent red " 2.acme.sh脚本出现bug，可查看[https://github.com/acmesh-official/acme.sh] issues" - echoContent red " 3.反馈给开发者[私聊：https://t.me/mack_a] 或 [提issues]" - exit 0 - fi - fi - if [[ -d "/root/.acme.sh" ]] && [[ -z `find /root/.acme.sh/ -name "acme.sh"` ]] - then - echoContent green " ---> 安装acme.sh" - curl -s https://get.acme.sh | sh > /etc/v2ray-agent/tls/acme.log - if [[ -d "~/.acme.sh" ]] && [[ -z `find /root/.acme.sh/ -name "acme.sh"` ]] - then - echoContent red " acme安装失败--->" - echoContent yellow "错误排查：" - echoContent red " 1.获取Github文件失败，请等待GitHub恢复后尝试，恢复进度可查看 [https://www.githubstatus.com/]" - echoContent red " 2.acme.sh脚本出现bug，可查看[https://github.com/acmesh-official/acme.sh] issues" - echoContent red " 3.反馈给开发者[私聊：https://t.me/mack_a] 或 [提issues]" - exit 0 - fi - fi + if [[ ! -d "$HOME/.acme.sh" ]]; then + echoContent green " ---> 安装acme.sh" + curl -s https://get.acme.sh | sh >/etc/v2ray-agent/tls/acme.log + if [[ -d "$HOME/.acme.sh" ]] && [[ -z $(find "$HOME/.acme.sh/acme.sh") ]]; then + echoContent red " acme安装失败--->" + echoContent yellow "错误排查：" + echoContent red " 1.获取Github文件失败，请等待Gitub恢复后尝试，恢复进度可查看 [https://www.githubstatus.com/]" + echoContent red " 2.acme.sh脚本出现bug，可查看[https://github.com/acmesh-official/acme.sh] issues" + echoContent red " 3.反馈给开发者[私聊：https://t.me/mack_a] 或 [提issues]" + exit 0 + fi + fi + if [[ -d "$HOME/.acme.sh" ]] && [[ -z $(find $HOME/.acme.sh/ -name "acme.sh") ]]; then + echoContent green " ---> 安装acme.sh" + curl -s https://get.acme.sh | sh >/etc/v2ray-agent/tls/acme.log + if [[ -d "$HOME/.acme.sh" ]] && [[ -z $(find "$HOME/.acme.sh/acme.sh") ]]; then + echoContent red " acme安装失败--->" + echoContent yellow "错误排查：" + echoContent red " 1.获取Github文件失败，请等待GitHub恢复后尝试，恢复进度可查看 [https://www.githubstatus.com/]" + echoContent red " 2.acme.sh脚本出现bug，可查看[https://github.com/acmesh-official/acme.sh] issues" + echoContent red " 3.反馈给开发者[私聊：https://t.me/mack_a] 或 [提issues]" + exit 0 + fi + fi } # 初始化Nginx申请证书配置 -initTLSNginxConfig(){ - handleNginx stop - echoContent skyBlue "\n进度 $1/${totalProgress} : 初始化Nginx申请证书配置" - if [[ ! -z "${currentHost}" ]] - then - echo - read -p "读取到上次安装记录，是否使用上次安装时的域名 ？[y/n]:" historyDomainStatus - if [[ "${historyDomainStatus}" = "y" ]] - then - domain=${currentHost} - echoContent yellow "\n ---> 域名：${domain}" - else - echo - echoContent yellow "请输入要配置的域名 例：blog.v2ray-agent.com --->" - read -p "域名:" domain - fi - else - echo - echoContent yellow "请输入要配置的域名 例：blog.v2ray-agent.com --->" - read -p "域名:" domain - fi +initTLSNginxConfig() { + handleNginx stop + echoContent skyBlue "\n进度 $1/${totalProgress} : 初始化Nginx申请证书配置" + if [[ -n "${currentHost}" ]]; then + echo + read -r -p "读取到上次安装记录，是否使用上次安装时的域名 ？[y/n]:" historyDomainStatus + if [[ "${historyDomainStatus}" == "y" ]]; then + domain=${currentHost} + echoContent yellow "\n ---> 域名：${domain}" + else + echo + echoContent yellow "请输入要配置的域名 例：blog.v2ray-agent.com --->" + read -r -p "域名:" domain + fi + else + echo + echoContent yellow "请输入要配置的域名 例：blog.v2ray-agent.com --->" + read -r -p "域名:" domain + fi - if [[ -z ${domain} ]] - then - echoContent red " 域名不可为空--->" - initTLSNginxConfig - else - # 修改配置 - echoContent green "\n ---> 配置Nginx" - touch /etc/nginx/conf.d/alone.conf - echo "server {listen 80;listen [::]:80;server_name ${domain};root /usr/share/nginx/html;location ~ /.well-known {allow all;}location /test {return 200 'fjkvymb6len';}}" > /etc/nginx/conf.d/alone.conf - # 启动nginx - handleNginx start - echoContent yellow "\n检查IP是否设置为当前VPS" - checkIP - # 测试nginx - echoContent yellow "\n检查Nginx是否正常访问" - domainResult=`curl -s ${domain}/test|grep fjkvymb6len` - if [[ ! -z ${domainResult} ]] - then - handleNginx stop - echoContent green "\n ---> Nginx配置成功" - else - echoContent red " ---> 无法正常访问服务器，请检测域名是否正确、域名的DNS解析以及防火墙设置是否正确--->" - exit 0; - fi - fi + if [[ -z ${domain} ]]; then + echoContent red " 域名不可为空--->" + initTLSNginxConfig + else + # 修改配置 + echoContent green "\n ---> 配置Nginx" + touch /etc/nginx/conf.d/alone.conf + echo "server {listen 80;listen [::]:80;server_name ${domain};root /usr/share/nginx/html;location ~ /.well-known {allow all;}location /test {return 200 'fjkvymb6len';}}" >/etc/nginx/conf.d/alone.conf + # 启动nginx + handleNginx start + echoContent yellow "\n检查IP是否设置为当前VPS" + checkIP + # 测试nginx + echoContent yellow "\n检查Nginx是否正常访问" + domainResult=$(curl -s "${domain}/test" | grep fjkvymb6len) + if [[ -n ${domainResult} ]]; then + handleNginx stop + echoContent green "\n ---> Nginx配置成功" + else + echoContent red " ---> 无法正常访问服务器，请检测域名是否正确、域名的DNS解析以及防火墙设置是否正确--->" + exit 0 + fi + fi } # 修改nginx重定向配置 -updateRedirectNginxConf(){ +updateRedirectNginxConf() { -cat << EOF > /etc/nginx/conf.d/alone.conf + cat </etc/nginx/conf.d/alone.conf server { listen 80; listen [::]:80; server_name ${domain}; + # shellcheck disable=SC2154 return 301 https://${domain}$request_uri; } EOF - if [[ "${debianVersion}" = "8" ]] - then -cat << EOF >> /etc/nginx/conf.d/alone.conf + if [[ "${debianVersion}" == "8" ]]; then + cat <>/etc/nginx/conf.d/alone.conf server { listen 31300; server_name ${domain}; @@ -580,8 +514,8 @@ cat << EOF >> /etc/nginx/conf.d/alone.conf # location /test {return 200 'fjkvymb6len';} } EOF - else -cat << EOF >> /etc/nginx/conf.d/alone.conf + else + cat <>/etc/nginx/conf.d/alone.conf server { listen 31300; server_name ${domain}; @@ -593,111 +527,98 @@ cat << EOF >> /etc/nginx/conf.d/alone.conf # location /test {return 200 'fjkvymb6len';} } EOF - fi + fi } # 检查ip -checkIP(){ - echoContent skyBlue " ---> 检查ipv4中" - pingIP=`ping -c 1 -W 1000 ${domain}|sed '1{s/[^(]*(//;s/).*//;q;}'` - if [[ -z "${pingIP}" ]] - then - echoContent skyBlue " ---> 检查ipv6中" - pingIP=`ping6 -c 1 ${domain}|sed '1{s/[^(]*(//;s/).*//;q;}'` - pingIPv6=${pingIP} - fi +checkIP() { + echoContent skyBlue " ---> 检查ipv4中" + pingIP=$(ping -c 1 -W 1000 ${domain} | sed '1{s/[^(]*(//;s/).*//;q;}') + if [[ -z "${pingIP}" ]]; then + echoContent skyBlue " ---> 检查ipv6中" + pingIP=$(ping6 -c 1 ${domain} | sed '1{s/[^(]*(//;s/).*//;q;}') + pingIPv6=${pingIP} + fi - if [[ ! -z "${pingIP}" ]] # && [[ `echo ${pingIP}|grep '^\([1-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5]\)\.\([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5]\)\.\([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5]\)\.\([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5]\)$'` ]] - then - echo - read -p "当前域名的IP为 [${pingIP}]，是否正确[y/n]？" domainStatus - if [[ "${domainStatus}" = "y" ]] - then - echoContent green "\n ---> IP确认完成" - else - echoContent red "\n ---> 1.检查Cloudflare DNS解析是否正常" - echoContent red " ---> 2.检查Cloudflare DNS云朵是否为灰色\n" - exit 0; - fi - else - read -p "IP查询失败，是否重试[y/n]？" retryStatus - if [[ "${retryStatus}" = "y" ]] - then - checkIP - else - exit 0; - fi - fi + if [[ -n "${pingIP}" ]]; then # && [[ `echo ${pingIP}|grep '^\([1-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5]\)\.\([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5]\)\.\([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5]\)\.\([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5]\)$'` ]] + echo + read -r -p "当前域名的IP为 [${pingIP}]，是否正确[y/n]？" domainStatus + if [[ "${domainStatus}" == "y" ]]; then + echoContent green "\n ---> IP确认完成" + else + echoContent red "\n ---> 1.检查Cloudflare DNS解析是否正常" + echoContent red " ---> 2.检查Cloudflare DNS云朵是否为灰色\n" + exit 0 + fi + else + read -r -p "IP查询失败，是否重试[y/n]？" retryStatus + if [[ "${retryStatus}" == "y" ]]; then + checkIP + else + exit 0 + fi + fi } # 安装TLS -installTLS(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 申请TLS证书\n" - local tlsDomain=${domain} - if [[ ! -z "${currentHost}" ]] - then - tlsDomain=${currentHost} - elif [[ ! -z "${domain}" ]] - then - tlsDomain=${domain} - fi +installTLS() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 申请TLS证书\n" + local tlsDomain=${domain} + if [[ -n "${currentHost}" ]]; then + tlsDomain=${currentHost} + elif [[ -n "${domain}" ]]; then + tlsDomain=${domain} + fi - # 安装tls - if [[ -f "/etc/v2ray-agent/tls/${tlsDomain}.crt" && -f "/etc/v2ray-agent/tls/${tlsDomain}.key" ]] || [[ -d "/root/.acme.sh/${tlsDomain}_ecc" && -f "/root/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.key" && -f "/root/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.cer" ]] - then - # 存在证书 - echoContent green " ---> 检测到证书" - checkTLStatus ${tlsDomain} - if [[ "${tlsStatus}" = "已过期" ]] - then - rm -rf /root/.acme.sh/${tlsDomain}_ecc/* - installTLS $1 - else - echoContent green " ---> 证书有效" - if [[ -z `ls /etc/v2ray-agent/tls|grep ${tlsDomain}.crt` || -z `ls /etc/v2ray-agent/tls|grep ${tlsDomain}.key` ]] - then - sudo ~/.acme.sh/acme.sh --installcert -d ${tlsDomain} --fullchainpath /etc/v2ray-agent/tls/${tlsDomain}.crt --keypath /etc/v2ray-agent/tls/${tlsDomain}.key --ecc >/dev/null - else - echoContent yellow " ---> 如未过期请选择[n]\n" - read -p "是否重新安装？[y/n]:" reInstallStatus - if [[ "${reInstallStatus}" = "y" ]] - then - rm -rf /etc/v2ray-agent/tls/* - installTLS $1 - fi - fi - fi - elif [[ -d "/root/.acme.sh" && ! -f "/root/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.key" && ! -f "/root/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.cer" ]] - then - echoContent green " ---> 安装TLS证书" - if [[ ! -z "${pingIPv6}" ]] - then - sudo ~/.acme.sh/acme.sh --issue -d ${tlsDomain} --standalone -k ec-256 --listen-v6 >/dev/null - else - sudo ~/.acme.sh/acme.sh --issue -d ${tlsDomain} --standalone -k ec-256 >/dev/null - fi + # 安装tls + if [[ -f "/etc/v2ray-agent/tls/${tlsDomain}.crt" && -f "/etc/v2ray-agent/tls/${tlsDomain}.key" ]] || [[ -d "$HOME/.acme.sh/${tlsDomain}_ecc" && -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.key" && -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.cer" ]]; then + # 存在证书 + echoContent green " ---> 检测到证书" + checkTLStatus "${tlsDomain}" + if [[ "${tlsStatus}" == "已过期" ]]; then + rm -rf "$HOME/.acme.sh/${tlsDomain}_ecc/*" + installTLS "$1" + else + echoContent green " ---> 证书有效" - sudo ~/.acme.sh/acme.sh --installcert -d ${tlsDomain} --fullchainpath /etc/v2ray-agent/tls/${tlsDomain}.crt --keypath /etc/v2ray-agent/tls/${tlsDomain}.key --ecc >/dev/null - if [[ -z `cat /etc/v2ray-agent/tls/${tlsDomain}.crt` ]] - then - echoContent red " ---> TLS安装失败，请检查acme日志" - exit 0 - elif [[ -z `cat /etc/v2ray-agent/tls/${tlsDomain}.key` ]] - then - echoContent red " ---> TLS安装失败，请检查acme日志" - exit 0 - fi - echoContent green " ---> TLS生成成功" - else - echoContent yellow " ---> 未安装acme.sh" - exit 0; - fi + if find /etc/v2ray-agent/tls/* | grep -q "${tlsDomain}.crt" || find /etc/v2ray-agent/tls/* | grep -q "${tlsDomain}.key"; then + sudo "$HOME/.acme.sh/acme.sh" --installcert -d "${tlsDomain}" --fullchainpath "/etc/v2ray-agent/tls/${tlsDomain}.crt" --keypath "/etc/v2ray-agent/tls/${tlsDomain}.key" --ecc >/dev/null + else + echoContent yellow " ---> 如未过期请选择[n]\n" + read -r -p "是否重新安装？[y/n]:" reInstallStatus + if [[ "${reInstallStatus}" == "y" ]]; then + rm -rf /etc/v2ray-agent/tls/* + installTLS "$1" + fi + fi + fi + elif [[ -d "$HOME/.acme.sh" && ! -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.key" && ! -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.cer" ]]; then + echoContent green " ---> 安装TLS证书" + if [[ -n "${pingIPv6}" ]]; then + sudo $HOME/.acme.sh/acme.sh --issue -d ${tlsDomain} --standalone -k ec-256 --listen-v6 >/dev/null + else + sudo $HOME/.acme.sh/acme.sh --issue -d ${tlsDomain} --standalone -k ec-256 >/dev/null + fi + + sudo $HOME/.acme.sh/acme.sh --installcert -d ${tlsDomain} --fullchainpath /etc/v2ray-agent/tls/${tlsDomain}.crt --keypath /etc/v2ray-agent/tls/${tlsDomain}.key --ecc >/dev/null + if [[ -z $(cat /etc/v2ray-agent/tls/${tlsDomain}.crt) ]]; then + echoContent red " ---> TLS安装失败，请检查acme日志" + exit 0 + elif [[ -z $(cat /etc/v2ray-agent/tls/${tlsDomain}.key) ]]; then + echoContent red " ---> TLS安装失败，请检查acme日志" + exit 0 + fi + echoContent green " ---> TLS生成成功" + else + echoContent yellow " ---> 未安装acme.sh" + exit 0 + fi } # 配置伪装博客 -initNginxConfig(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 配置Nginx" +initNginxConfig() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 配置Nginx" - cat << EOF > /etc/nginx/conf.d/alone.conf + cat </etc/nginx/conf.d/alone.conf server { listen 80; listen [::]:80; @@ -710,606 +631,529 @@ EOF } # 自定义/随机路径 -randomPathFunction(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 生成随机路径" +randomPathFunction() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 生成随机路径" - if [[ ! -z "${currentPath}" ]] - then - echo - read -p "读取到上次安装记录，是否使用上次安装时的path路径 ？[y/n]:" historyPathStatus - echo - fi + if [[ -n "${currentPath}" ]]; then + echo + read -r -p "读取到上次安装记录，是否使用上次安装时的path路径 ？[y/n]:" historyPathStatus + echo + fi - if [[ "${historyPathStatus}" = "y" ]] - then - customPath=${currentPath} - echoContent green " ---> 使用成功\n" - else - echoContent yellow "请输入自定义路径[例: alone]，不需要斜杠，[回车]随机路径" - read -p '路径:' customPath + if [[ "${historyPathStatus}" == "y" ]]; then + customPath=${currentPath} + echoContent green " ---> 使用成功\n" + else + echoContent yellow "请输入自定义路径[例: alone]，不需要斜杠，[回车]随机路径" + read -r -p '路径:' customPath - if [[ -z "${customPath}" ]] - then - customPath=`head -n 50 /dev/urandom|sed 's/[^a-z]//g'|strings -n 4|tr 'A-Z' 'a-z'|head -1` - currentPath=${customPath:0:4} - fi - fi - echoContent yellow "path：${customPath}" - echoContent skyBlue "\n----------------------------" + if [[ -z "${customPath}" ]]; then + customPath=$(head -n 50 /dev/urandom | sed 's/[^a-z]//g' | strings -n 4 | tr 'A-Z' 'a-z' | head -1) + currentPath=${customPath:0:4} + fi + fi + echoContent yellow "path：${customPath}" + echoContent skyBlue "\n----------------------------" } # Nginx伪装博客 -nginxBlog(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 添加伪装站点" - if [[ -d "/usr/share/nginx/html" && -f "/usr/share/nginx/html/check" ]] - then - echo - read -p "检测到安装伪装站点，是否需要重新安装[y/n]：" nginxBlogInstallStatus - if [[ "${nginxBlogInstallStatus}" = "y" ]] - then - rm -rf /usr/share/nginx/html - wget -q -P /usr/share/nginx https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html1.zip > /dev/null - unzip -o /usr/share/nginx/html1.zip -d /usr/share/nginx/html > /dev/null - rm -f /usr/share/nginx/html.zip* - echoContent green " ---> 添加伪装站点成功" - fi - else - rm -rf /usr/share/nginx/html - wget -q -P /usr/share/nginx https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html1.zip > /dev/null - unzip -o /usr/share/nginx/html1.zip -d /usr/share/nginx/html > /dev/null - rm -f /usr/share/nginx/html1.zip* - echoContent green " ---> 添加伪装站点成功" - fi +nginxBlog() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 添加伪装站点" + if [[ -d "/usr/share/nginx/html" && -f "/usr/share/nginx/html/check" ]]; then + echo + read -r -p "检测到安装伪装站点，是否需要重新安装[y/n]：" nginxBlogInstallStatus + if [[ "${nginxBlogInstallStatus}" == "y" ]]; then + rm -rf /usr/share/nginx/html + wget -q -P /usr/share/nginx https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html1.zip >/dev/null + unzip -o /usr/share/nginx/html1.zip -d /usr/share/nginx/html >/dev/null + rm -f /usr/share/nginx/html.zip* + echoContent green " ---> 添加伪装站点成功" + fi + else + rm -rf /usr/share/nginx/html + wget -q -P /usr/share/nginx https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html1.zip >/dev/null + unzip -o /usr/share/nginx/html1.zip -d /usr/share/nginx/html >/dev/null + rm -f /usr/share/nginx/html1.zip* + echoContent green " ---> 添加伪装站点成功" + fi } # 操作Nginx -handleNginx(){ - if [[ -z `ps -ef|grep -v grep|grep nginx` ]] && [[ "$1" = "start" ]] - then - nginx - sleep 0.5 - if [[ -z `ps -ef|grep -v grep|grep nginx` ]] - then - echoContent red " ---> Nginx启动失败，请检查日志" - exit 0 - fi - elif [[ "$1" = "stop" ]] && [[ ! -z `ps -ef|grep -v grep|grep nginx` ]] - then - nginx -s stop > /dev/null 2>&1 - sleep 0.5 - if [[ ! -z `ps -ef|grep -v grep|grep nginx` ]] - then - ps -ef|grep -v grep|grep nginx|awk '{print $2}'|xargs kill -9 - fi - fi +handleNginx() { + + if ! ps -ef | grep -q nginx && [[ "$1" == "start" ]]; then + nginx + sleep 0.5 + if ! ps -ef | grep -v grep | grep -q nginx; then + echoContent red " ---> Nginx启动失败，请检查日志" + exit 0 + fi + elif [[ "$1" == "stop" ]] && ps -ef | grep -q nginx; then + nginx -s stop >/dev/null 2>&1 + sleep 0.5 + if ps -ef | grep -v grep | grep nginx; then + ps -ef | grep -v grep | grep nginx | awk '{print $2}' | xargs kill -9 + fi + fi } # 定时任务更新tls证书 -installCronTLS(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 添加定时维护证书" - if [[ -z `crontab -l|grep -v grep|grep '/etc/v2ray-agent/install.sh'` ]] - then - crontab -l > /etc/v2ray-agent/backup_crontab.cron - if [[ ! -z `cat /etc/v2ray-agent/backup_crontab.cron|grep /etc/v2ray-agent/reloadInstallTLS.sh` ]] - then - sed -i "s/30 1 \\* \\* \\* \\/bin\\/bash \\/etc\\/v2ray-agent\\/reloadInstallTLS.sh//g" `grep "30 1 \\* \\* \\* /bin/bash /etc/v2ray-agent/reloadInstallTLS.sh" -rl /etc/v2ray-agent/backup_crontab.cron` - fi +installCronTLS() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 添加定时维护证书" + if crontab -l | grep -v grep | grep -q '/etc/v2ray-agent/install.sh'; then + crontab -l >/etc/v2ray-agent/backup_crontab.cron + if grep > /etc/v2ray-agent/backup_crontab.cron - crontab /etc/v2ray-agent/backup_crontab.cron - fi + # 定时任务 + echo "30 1 * * * /bin/bash /etc/v2ray-agent/install.sh RenewTLS" >>/etc/v2ray-agent/backup_crontab.cron + crontab /etc/v2ray-agent/backup_crontab.cron + fi - if [[ ! -z `crontab -l|grep -v grep|grep '/etc/v2ray-agent/install.sh'` ]] - then - echoContent green " ---> 添加定时维护证书成功" - else - echo "30 1 * * * /bin/bash /etc/v2ray-agent/install.sh RenewTLS" >> /etc/v2ray-agent/backup_crontab.cron - crontab /etc/v2ray-agent/backup_crontab.cron - echoContent green " ---> 添加定时维护证书成功" - fi + if [[ -n $(crontab -l | grep -v grep | grep '/etc/v2ray-agent/install.sh') ]]; then + echoContent green " ---> 添加定时维护证书成功" + else + echo "30 1 * * * /bin/bash /etc/v2ray-agent/install.sh RenewTLS" >>/etc/v2ray-agent/backup_crontab.cron + crontab /etc/v2ray-agent/backup_crontab.cron + echoContent green " ---> 添加定时维护证书成功" + fi } # 更新证书 -renewalTLS(){ - echoContent skyBlue "\n进度 1/1 : 更新证书" +renewalTLS() { + echoContent skyBlue "\n进度 1/1 : 更新证书" - if [[ -d "/root/.acme.sh/${currentHost}_ecc" ]] && [[ -f "/root/.acme.sh/${currentHost}_ecc/${currentHost}.key" ]] && [[ -f "/root/.acme.sh/${currentHost}_ecc/${currentHost}.cer" ]] - then - modifyTime=`stat /root/.acme.sh/${currentHost}_ecc/${currentHost}.key|sed -n '7,6p'|awk '{print $2" "$3" "$4" "$5}'` + if [[ -d "$HOME/.acme.sh/${currentHost}_ecc" ]] && [[ -f "$HOME/.acme.sh/${currentHost}_ecc/${currentHost}.key" ]] && [[ -f "$HOME/.acme.sh/${currentHost}_ecc/${currentHost}.cer" ]]; then + modifyTime=$(stat $HOME/.acme.sh/${currentHost}_ecc/${currentHost}.key | sed -n '7,6p' | awk '{print $2" "$3" "$4" "$5}') - modifyTime=`date +%s -d "${modifyTime}"` - currentTime=`date +%s` - stampDiff=`expr ${currentTime} - ${modifyTime}` - days=`expr ${stampDiff} / 86400` - remainingDays=`expr 90 - ${days}` - tlsStatus=${remainingDays} - if [[ ${remainingDays} -le 0 ]] - then - tlsStatus="已过期" - fi - echoContent skyBlue " ---> 证书生成日期:"`date -d @${modifyTime} +"%F %H:%M:%S"` - echoContent skyBlue " ---> 证书生成天数:"${days} - echoContent skyBlue " ---> 证书剩余天数:"${tlsStatus} + modifyTime=$(date +%s -d "${modifyTime}") + currentTime=$(date +%s) + stampDiff=$(expr ${currentTime} - ${modifyTime}) + days=$(expr ${stampDiff} / 86400) + remainingDays=$(expr 90 - ${days}) + tlsStatus=${remainingDays} + if [[ ${remainingDays} -le 0 ]]; then + tlsStatus="已过期" + fi + echoContent skyBlue " ---> 证书生成日期:$(date -d @"${modifyTime}" +"%F %H:%M:%S")" + echoContent skyBlue " ---> 证书生成天数:${days}" + echoContent skyBlue " ---> 证书剩余天数:"${tlsStatus} - if [[ ${remainingDays} -le 1 ]] - then - echoContent yellow " ---> 重新生成证书" - handleNginx stop - sudo ~/.acme.sh/acme.sh --cron --home /root/.acme.sh - sudo ~/.acme.sh/acme.sh --installcert -d ${currentHost} --fullchainpath /etc/v2ray-agent/tls/${currentHost}.crt --keypath /etc/v2ray-agent/tls/${currentHost}.key --ecc >> /etc/v2ray-agent/tls/acme.log - handleNginx start + if [[ ${remainingDays} -le 1 ]]; then + echoContent yellow " ---> 重新生成证书" + handleNginx stop + sudo "$HOME/.acme.sh/acme.sh" --cron --home "$HOME/.acme.sh" + sudo "$HOME/.acme.sh/acme.sh" --installcert -d "${currentHost}" --fullchainpath /etc/v2ray-agent/tls/"${currentHost}.crt" --keypath /etc/v2ray-agent/tls/"${currentHost}.key" --ecc | sudo tee -a /etc/v2ray-agent/tls/acme.log + handleNginx start - if [[ "${coreInstallType}" = "1" ]] - then - handleXray stop - handleXray start - elif [[ "${coreInstallType}" = "2" || "${coreInstallType}" = "3" ]] - then - handleV2Ray stop - handleV2Ray start - fi + if [[ "${coreInstallType}" == "1" ]]; then + handleXray stop + handleXray start + elif [[ "${coreInstallType}" == "2" || "${coreInstallType}" == "3" ]]; then + handleV2Ray stop + handleV2Ray start + fi - else - echoContent green " ---> 证书有效" - fi - else - echoContent red " ---> 未安装" - fi + else + echoContent green " ---> 证书有效" + fi + else + echoContent red " ---> 未安装" + fi } # 查看TLS证书的状态 -checkTLStatus(){ +checkTLStatus() { - if [[ ! -z "$1" ]] - then - if [[ -d "/root/.acme.sh/$1_ecc" ]] && [[ -f "/root/.acme.sh/$1_ecc/$1.key" ]] && [[ -f "/root/.acme.sh/$1_ecc/$1.cer" ]] - then - modifyTime=`stat /root/.acme.sh/$1_ecc/$1.key|sed -n '7,6p'|awk '{print $2" "$3" "$4" "$5}'` + if [[ -n "$1" ]]; then + if [[ -d "$HOME/.acme.sh/$1_ecc" ]] && [[ -f "$HOME/.acme.sh/$1_ecc/$1.key" ]] && [[ -f "$HOME/.acme.sh/$1_ecc/$1.cer" ]]; then + modifyTime=$(stat $HOME/.acme.sh/$1_ecc/$1.key | sed -n '7,6p' | awk '{print $2" "$3" "$4" "$5}') - modifyTime=`date +%s -d "${modifyTime}"` - currentTime=`date +%s` - stampDiff=`expr ${currentTime} - ${modifyTime}` - days=`expr ${stampDiff} / 86400` - remainingDays=`expr 90 - ${days}` - tlsStatus=${remainingDays} - if [[ ${remainingDays} -le 0 ]] - then - tlsStatus="已过期" - fi - echoContent skyBlue " ---> 证书生成日期:"`date -d @${modifyTime} +"%F %H:%M:%S"` - echoContent skyBlue " ---> 证书生成天数:"${days} - echoContent skyBlue " ---> 证书剩余天数:"${tlsStatus} - fi - fi + modifyTime=$(date +%s -d "${modifyTime}") + currentTime=$(date +%s) + stampDiff=$(expr ${currentTime} - ${modifyTime}) + days=$(expr ${stampDiff} / 86400) + remainingDays=$(expr 90 - ${days}) + tlsStatus=${remainingDays} + if [[ ${remainingDays} -le 0 ]]; then + tlsStatus="已过期" + fi + echoContent skyBlue " ---> 证书生成日期:$(date -d "@${modifyTime}" +"%F %H:%M:%S")" + echoContent skyBlue " ---> 证书生成天数:${days}" + echoContent skyBlue " ---> 证书剩余天数:${tlsStatus}" + fi + fi } # 安装V2Ray、指定版本 -installV2Ray(){ - readInstallType - echoContent skyBlue "\n进度 $1/${totalProgress} : 安装V2Ray" - # 首先要卸载掉其余途径安装的V2Ray - if [[ ! -z `ps -ef|grep -v grep|grep v2ray` ]] && [[ -z `ps -ef|grep -v grep|grep v2ray|grep v2ray-agent` ]] - then - ps -ef|grep -v grep|grep v2ray|awk '{print $8}'|xargs rm -f - ps -ef|grep -v grep|grep v2ray|awk '{print $2}'|xargs kill -9 > /dev/null 2>&1 - fi +installV2Ray() { + readInstallType + echoContent skyBlue "\n进度 $1/${totalProgress} : 安装V2Ray" + # 首先要卸载掉其余途径安装的V2Ray + if [[ -n $(ps -ef | grep -v grep | grep v2ray) ]] && [[ -z $(ps -ef | grep -v grep | grep v2ray | grep v2ray-agent) ]]; then + ps -ef | grep -v grep | grep v2ray | awk '{print $8}' | xargs rm -f + ps -ef | grep -v grep | grep v2ray | awk '{print $2}' | xargs kill -9 >/dev/null 2>&1 + fi - if [[ "${coreInstallType}" != "2" && "${coreInstallType}" != "3" ]] - then - if [[ "${selectCoreType}" = "2" ]] - then - version=`curl -s https://github.com/v2fly/v2ray-core/releases|grep /v2ray-core/releases/tag/|head -1|awk -F "[/]" '{print $6}'|awk -F "[>]" '{print $2}'|awk -F "[<]" '{print $1}'` - else - version=${v2rayCoreVersion} - fi + if [[ "${coreInstallType}" != "2" && "${coreInstallType}" != "3" ]]; then + if [[ "${selectCoreType}" == "2" ]]; then + version=$(curl -s https://github.com/v2fly/v2ray-core/releases | grep /v2ray-core/releases/tag/ | head -1 | awk -F "[/]" '{print $6}' | awk -F "[>]" '{print $2}' | awk -F "[<]" '{print $1}') + else + version=${v2rayCoreVersion} + fi - echoContent green " ---> v2ray-core版本:${version}" - if [[ ! -z `wget --help|grep show-progress` ]] - then - wget -c -q --show-progress -P /etc/v2ray-agent/v2ray/ https://github.com/v2fly/v2ray-core/releases/download/${version}/v2ray-linux-64.zip - else - wget -c -P /etc/v2ray-agent/v2ray/ https://github.com/v2fly/v2ray-core/releases/download/${version}/v2ray-linux-64.zip > /dev/null 2>&1 - fi + echoContent green " ---> v2ray-core版本:${version}" + if wget --help | grep -q show-progress; then + wget -c -q --show-progress -P /etc/v2ray-agent/v2ray/ https://github.com/v2fly/v2ray-core/releases/download/${version}/v2ray-linux-64.zip + else + wget -c -P /etc/v2ray-agent/v2ray/ https://github.com/v2fly/v2ray-core/releases/download/${version}/v2ray-linux-64.zip >/dev/null 2>&1 + fi - unzip -o /etc/v2ray-agent/v2ray/v2ray-linux-64.zip -d /etc/v2ray-agent/v2ray > /dev/null - rm -rf /etc/v2ray-agent/v2ray/v2ray-linux-64.zip - else - if [[ "${selectCoreType}" = "3" ]] - then - echoContent green " ---> 锁定v2ray-core版本为v4.32.1" - rm -f /etc/v2ray-agent/v2ray/v2ray - rm -f /etc/v2ray-agent/v2ray/v2ctl - installV2Ray $1 - else - echoContent green " ---> v2ray-core版本:`/etc/v2ray-agent/v2ray/v2ray --version|awk '{print $2}'|head -1`" - read -p "是否更新、升级？[y/n]:" reInstallV2RayStatus - if [[ "${reInstallV2RayStatus}" = "y" ]] - then - rm -f /etc/v2ray-agent/v2ray/v2ray - rm -f /etc/v2ray-agent/v2ray/v2ctl - installV2Ray $1 - fi - fi - fi + unzip -o /etc/v2ray-agent/v2ray/v2ray-linux-64.zip -d /etc/v2ray-agent/v2ray >/dev/null + rm -rf /etc/v2ray-agent/v2ray/v2ray-linux-64.zip + else + if [[ "${selectCoreType}" == "3" ]]; then + echoContent green " ---> 锁定v2ray-core版本为v4.32.1" + rm -f /etc/v2ray-agent/v2ray/v2ray + rm -f /etc/v2ray-agent/v2ray/v2ctl + installV2Ray "$1" + else + echoContent green " ---> v2ray-core版本:$(/etc/v2ray-agent/v2ray/v2ray --version | awk '{print $2}' | head -1)" + read -r -p "是否更新、升级？[y/n]:" reInstallV2RayStatus + if [[ "${reInstallV2RayStatus}" == "y" ]]; then + rm -f /etc/v2ray-agent/v2ray/v2ray + rm -f /etc/v2ray-agent/v2ray/v2ctl + installV2Ray "$1" + fi + fi + fi } # 安装xray -installXray(){ - readInstallType - echoContent skyBlue "\n进度 $1/${totalProgress} : 安装Xray" - # 首先要卸载掉其余途径安装的Xray - if [[ ! -z `ps -ef|grep -v grep|grep xray` ]] && [[ -z `ps -ef|grep -v grep|grep v2ray|grep v2ray-agent` ]] - then - ps -ef|grep -v grep|grep xray|awk '{print $8}'|xargs rm -f - ps -ef|grep -v grep|grep xray|awk '{print $2}'|xargs kill -9 > /dev/null 2>&1 - fi +installXray() { + readInstallType + echoContent skyBlue "\n进度 $1/${totalProgress} : 安装Xray" - if [[ "${coreInstallType}" != "1" ]] - then - version=`curl -s https://github.com/XTLS/Xray-core/releases|grep /XTLS/Xray-core/releases/tag/|head -1|awk '{print $3}'|awk -F "[<]" '{print $1}'` + if [[ "${coreInstallType}" != "1" ]]; then + version=$(curl -s https://github.com/XTLS/Xray-core/releases | grep /XTLS/Xray-core/releases/tag/ | head -1 | awk '{print $3}' | awk -F "[<]" '{print $1}') - echoContent green " ---> Xray-core版本:${version}" - if [[ ! -z `wget --help|grep show-progress` ]] - then - wget -c -q --show-progress -P /etc/v2ray-agent/xray/ https://github.com/XTLS/Xray-core/releases/download/${version}/Xray-linux-64.zip - else - wget -c -P /etc/v2ray-agent/xray/ https://github.com/XTLS/Xray-core/releases/download/${version}/Xray-linux-64.zip > /dev/null 2>&1 - fi + echoContent green " ---> Xray-core版本:${version}" + if wget --help | grep -q show-progress; then + wget -c -q --show-progress -P /etc/v2ray-agent/xray/ https://github.com/XTLS/Xray-core/releases/download/${version}/Xray-linux-64.zip + else + wget -c -P /etc/v2ray-agent/xray/ https://github.com/XTLS/Xray-core/releases/download/${version}/Xray-linux-64.zip >/dev/null 2>&1 + fi - unzip -o /etc/v2ray-agent/xray/Xray-linux-64.zip -d /etc/v2ray-agent/xray > /dev/null - rm -rf /etc/v2ray-agent/xray/Xray-linux-64.zip - chmod 655 /etc/v2ray-agent/xray/xray - else - echoContent green " ---> Xray-core版本:`/etc/v2ray-agent/xray/xray --version|awk '{print $2}'|head -1`" - read -p "是否更新、升级？[y/n]:" reInstallXrayStatus - if [[ "${reInstallXrayStatus}" = "y" ]] - then - rm -f /etc/v2ray-agent/xray/xray - installXray $1 - fi - fi + unzip -o /etc/v2ray-agent/xray/Xray-linux-64.zip -d /etc/v2ray-agent/xray >/dev/null + rm -rf /etc/v2ray-agent/xray/Xray-linux-64.zip + chmod 655 /etc/v2ray-agent/xray/xray + else + echoContent green " ---> Xray-core版本:$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)" + read -r -p "是否更新、升级？[y/n]:" reInstallXrayStatus + if [[ "${reInstallXrayStatus}" == "y" ]]; then + rm -f /etc/v2ray-agent/xray/xray + installXray "$1" + fi + fi } # 安装Trojan-go -installTrojanGo(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 安装Trojan-Go" - if [[ -z `ls -F /etc/v2ray-agent/trojan/|grep -w "trojan-go"` ]] - then - version=`curl -s https://github.com/p4gefau1t/trojan-go/releases|grep /trojan-go/releases/tag/|head -1|awk -F "[/]" '{print $6}'|awk -F "[>]" '{print $2}'|awk -F "[<]" '{print $1}'` - echoContent green " ---> Trojan-Go版本:${version}" - if [[ ! -z `wget --help|grep show-progress` ]] - then - wget -c -q --show-progress -P /etc/v2ray-agent/trojan/ https://github.com/p4gefau1t/trojan-go/releases/download/${version}/trojan-go-linux-amd64.zip - else - wget -c -P /etc/v2ray-agent/trojan/ https://github.com/p4gefau1t/trojan-go/releases/download/${version}/trojan-go-linux-amd64.zip > /dev/null 2>&1 - fi - unzip -o /etc/v2ray-agent/trojan/trojan-go-linux-amd64.zip -d /etc/v2ray-agent/trojan > /dev/null - rm -rf /etc/v2ray-agent/trojan/trojan-go-linux-amd64.zip - else - echoContent green " ---> Trojan-Go版本:`/etc/v2ray-agent/trojan/trojan-go --version|awk '{print $2}'|head -1`" +installTrojanGo() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 安装Trojan-Go" + if find /etc/v2ray-agent/trojan/ | grep -q trojan-go; then + version=$(curl -s https://github.com/p4gefau1t/trojan-go/releases | grep /trojan-go/releases/tag/ | head -1 | awk -F "[/]" '{print $6}' | awk -F "[>]" '{print $2}' | awk -F "[<]" '{print $1}') + echoContent green " ---> Trojan-Go版本:${version}" + if wget --help | grep -q show-progress; then + wget -c -q --show-progress -P /etc/v2ray-agent/trojan/ https://github.com/p4gefau1t/trojan-go/releases/download/${version}/trojan-go-linux-amd64.zip + else + wget -c -P /etc/v2ray-agent/trojan/ https://github.com/p4gefau1t/trojan-go/releases/download/${version}/trojan-go-linux-amd64.zip >/dev/null 2>&1 + fi + unzip -o /etc/v2ray-agent/trojan/trojan-go-linux-amd64.zip -d /etc/v2ray-agent/trojan >/dev/null + rm -rf /etc/v2ray-agent/trojan/trojan-go-linux-amd64.zip + else + echoContent green " ---> Trojan-Go版本:$(/etc/v2ray-agent/trojan/trojan-go --version | awk '{print $2}' | head -1)" - read -p "是否重新安装？[y/n]:" reInstallTrojanStatus - if [[ "${reInstallTrojanStatus}" = "y" ]] - then - rm -rf /etc/v2ray-agent/trojan/trojan-go* - installTrojanGo $1 - fi - fi + read -r -p "是否重新安装？[y/n]:" reInstallTrojanStatus + if [[ "${reInstallTrojanStatus}" == "y" ]]; then + rm -rf /etc/v2ray-agent/trojan/trojan-go* + installTrojanGo $1 + fi + fi } # v2ray版本管理 -v2rayVersionManageMenu(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : V2Ray版本管理" - if [[ ! -d "/etc/v2ray-agent/v2ray/" ]] - then - echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容" - menu - exit 0; - fi - echoContent red "\n==============================================================" - echoContent yellow "1.升级" - echoContent yellow "2.回退" - echoContent red "==============================================================" - read -p "请选择：" selectV2RayType - if [[ "${selectV2RayType}" = "1" ]] - then - updateV2Ray - elif [[ "${selectV2RayType}" = "2" ]] - then - echoContent yellow "\n1.只可以回退最近的两个版本" - echoContent yellow "2.不保证回退后一定可以正常使用" - echoContent yellow "3.如果回退的版本不支持当前的config，则会无法连接，谨慎操作" - echoContent skyBlue "------------------------Version-------------------------------" - curl -s https://github.com/v2fly/v2ray-core/releases|grep /v2ray-core/releases/tag/|head -3|awk -F "[/]" '{print $6}'|awk -F "[>]" '{print $2}'|awk -F "[<]" '{print $1}'|tail -n 2|awk '{print ""NR""":"$0}' - echoContent skyBlue "--------------------------------------------------------------" - read -p "请输入要回退的版本：" selectV2rayVersionType - version=`curl -s https://github.com/v2fly/v2ray-core/releases|grep /v2ray-core/releases/tag/|head -3|awk -F "[/]" '{print $6}'|awk -F "[>]" '{print $2}'|awk -F "[<]" '{print $1}'|tail -n 2|awk '{print ""NR""":"$0}'|grep "${selectV2rayVersionType}:"|awk -F "[:]" '{print $2}'` - if [[ ! -z "${version}" ]] - then - updateV2Ray ${version} - else - echoContent red "\n ---> 输入有误，请重新输入" - v2rayVersionManageMenu 1 - fi - fi - +v2rayVersionManageMenu() { + echoContent skyBlue "\n进度 $1/${totalProgress} : V2Ray版本管理" + if [[ ! -d "/etc/v2ray-agent/v2ray/" ]]; then + echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容" + menu + exit 0 + fi + echoContent red "\n==============================================================" + echoContent yellow "1.升级" + echoContent yellow "2.回退" + echoContent red "==============================================================" + read -r -p "请选择：" selectV2RayType + if [[ "${selectV2RayType}" == "1" ]]; then + updateV2Ray + elif [[ "${selectV2RayType}" == "2" ]]; then + echoContent yellow "\n1.只可以回退最近的两个版本" + echoContent yellow "2.不保证回退后一定可以正常使用" + echoContent yellow "3.如果回退的版本不支持当前的config，则会无法连接，谨慎操作" + echoContent skyBlue "------------------------Version-------------------------------" + curl -s https://github.com/v2fly/v2ray-core/releases | grep /v2ray-core/releases/tag/ | head -3 | awk -F "[/]" '{print $6}' | awk -F "[>]" '{print $2}' | awk -F "[<]" '{print $1}' | tail -n 2 | awk '{print ""NR""":"$0}' + echoContent skyBlue "--------------------------------------------------------------" + read -r -p "请输入要回退的版本：" selectV2rayVersionType + version=$(curl -s https://github.com/v2fly/v2ray-core/releases | grep /v2ray-core/releases/tag/ | head -3 | awk -F "[/]" '{print $6}' | awk -F "[>]" '{print $2}' | awk -F "[<]" '{print $1}' | tail -n 2 | awk '{print ""NR""":"$0}' | grep "${selectV2rayVersionType}:" | awk -F "[:]" '{print $2}') + if [[ -n "${version}" ]]; then + updateV2Ray ${version} + else + echoContent red "\n ---> 输入有误，请重新输入" + v2rayVersionManageMenu 1 + fi + fi } # xray版本管理 -xrayVersionManageMenu(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : Xray版本管理" - if [[ ! -d "/etc/v2ray-agent/xray/" ]] - then - echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容" - menu - exit 0; - fi - echoContent red "\n==============================================================" - echoContent yellow "1.升级" - echoContent yellow "2.回退" - echoContent red "==============================================================" - read -p "请选择：" selectXrayType - if [[ "${selectXrayType}" = "1" ]] - then - updateXray - elif [[ "${selectXrayType}" = "2" ]] - then - echoContent yellow "\n1.由于Xray-core频繁更新，只可以回退最近的一个版本" - echoContent yellow "2.不保证回退后一定可以正常使用" - echoContent yellow "3.如果回退的版本不支持当前的config，则会无法连接，谨慎操作" - echoContent skyBlue "------------------------Version-------------------------------" - curl -s https://github.com/XTLS/Xray-core/releases|grep /XTLS/Xray-core/releases/tag/|head -3|awk '{print $3}'|awk -F "[<]" '{print $1}'|tail -n 1|awk '{print ""NR""":"$0}' - echoContent skyBlue "--------------------------------------------------------------" - read -p "请输入要回退的版本：" selectXrayVersionType - version=`curl -s https://github.com/XTLS/Xray-core/releases|grep /XTLS/Xray-core/releases/tag/|head -3|awk '{print $3}'|awk -F "[<]" '{print $1}'|tail -n 1|awk '{print ""NR""":"$0}'|grep "${selectXrayVersionType}:"|awk -F "[:]" '{print $2}'` - if [[ ! -z "${version}" ]] - then - updateXray ${version} - else - echoContent red "\n ---> 输入有误，请重新输入" - xrayVersionManageMenu 1 - fi - fi +xrayVersionManageMenu() { + echoContent skyBlue "\n进度 $1/${totalProgress} : Xray版本管理" + if [[ ! -d "/etc/v2ray-agent/xray/" ]]; then + echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容" + menu + exit 0 + fi + echoContent red "\n==============================================================" + echoContent yellow "1.升级" + echoContent yellow "2.回退" + echoContent red "==============================================================" + read -r -p "请选择：" selectXrayType + if [[ "${selectXrayType}" == "1" ]]; then + updateXray + elif [[ "${selectXrayType}" == "2" ]]; then + echoContent yellow "\n1.由于Xray-core频繁更新，只可以回退最近的一个版本" + echoContent yellow "2.不保证回退后一定可以正常使用" + echoContent yellow "3.如果回退的版本不支持当前的config，则会无法连接，谨慎操作" + echoContent skyBlue "------------------------Version-------------------------------" + curl -s https://github.com/XTLS/Xray-core/releases | grep /XTLS/Xray-core/releases/tag/ | head -3 | awk '{print $3}' | awk -F "[<]" '{print $1}' | tail -n 1 | awk '{print ""NR""":"$0}' + echoContent skyBlue "--------------------------------------------------------------" + read -r -p "请输入要回退的版本：" selectXrayVersionType + version=$(curl -s https://github.com/XTLS/Xray-core/releases | grep /XTLS/Xray-core/releases/tag/ | head -3 | awk '{print $3}' | awk -F "[<]" '{print $1}' | tail -n 1 | awk '{print ""NR""":"$0}' | grep "${selectXrayVersionType}:" | awk -F "[:]" '{print $2}') + if [[ -n "${version}" ]]; then + updateXray "${version}" + else + echoContent red "\n ---> 输入有误，请重新输入" + xrayVersionManageMenu 1 + fi + fi } # 更新V2Ray -updateV2Ray(){ - readInstallType - if [[ -z "${coreInstallType}" ]] - then +updateV2Ray() { + readInstallType + if [[ -z "${coreInstallType}" ]]; then - if [[ ! -z "$1" ]] - then - version=$1 - else - version=`curl -s https://github.com/v2fly/v2ray-core/releases|grep /v2ray-core/releases/tag/|head -1|awk -F "[/]" '{print $6}'|awk -F "[>]" '{print $2}'|awk -F "[<]" '{print $1}'` - fi - # 使用锁定的版本 - if [[ ! -z "${v2rayCoreVersion}" ]] - then - version=${v2rayCoreVersion} - fi - echoContent green " ---> v2ray-core版本:${version}" + if [[ -n "$1" ]]; then + version=$1 + else + version=$(curl -s https://github.com/v2fly/v2ray-core/releases | grep /v2ray-core/releases/tag/ | head -1 | awk -F "[/]" '{print $6}' | awk -F "[>]" '{print $2}' | awk -F "[<]" '{print $1}') + fi + # 使用锁定的版本 + if [[ -n "${v2rayCoreVersion}" ]]; then + version=${v2rayCoreVersion} + fi + echoContent green " ---> v2ray-core版本:${version}" - if [[ ! -z `wget --help|grep show-progress` ]] - then - wget -c -q --show-progress -P /etc/v2ray-agent/v2ray/ https://github.com/v2fly/v2ray-core/releases/download/${version}/v2ray-linux-64.zip - else - wget -c -P /etc/v2ray-agent/v2ray/ https://github.com/v2fly/v2ray-core/releases/download/${version}/v2ray-linux-64.zip > /dev/null 2>&1 - fi + if wget --help | grep -q show-progress; then + wget -c -q --show-progress -P "/etc/v2ray-agent/v2ray/ https://github.com/v2fly/v2ray-core/releases/download/${version}/v2ray-linux-64.zip" + else + wget -c -P "/etc/v2ray-agent/v2ray/ https://github.com/v2fly/v2ray-core/releases/download/${version}/v2ray-linux-64.zip" >/dev/null 2>&1 + fi - unzip -o /etc/v2ray-agent/v2ray/v2ray-linux-64.zip -d /etc/v2ray-agent/v2ray > /dev/null - rm -rf /etc/v2ray-agent/v2ray/v2ray-linux-64.zip - handleV2Ray stop - handleV2Ray start - else - echoContent green " ---> 当前v2ray-core版本:`/etc/v2ray-agent/v2ray/v2ray --version|awk '{print $2}'|head -1`" + unzip -o /etc/v2ray-agent/v2ray/v2ray-linux-64.zip -d /etc/v2ray-agent/v2ray >/dev/null + rm -rf /etc/v2ray-agent/v2ray/v2ray-linux-64.zip + handleV2Ray stop + handleV2Ray start + else + echoContent green " ---> 当前v2ray-core版本:$(/etc/v2ray-agent/v2ray/v2ray --version | awk '{print $2}' | head -1)" - if [[ ! -z "$1" ]] - then - version=$1 - else - version=`curl -s https://github.com/v2fly/v2ray-core/releases|grep /v2ray-core/releases/tag/|head -1|awk -F "[/]" '{print $6}'|awk -F "[>]" '{print $2}'|awk -F "[<]" '{print $1}'` - fi + if [[ -n "$1" ]]; then + version=$1 + else + version=$(curl -s https://github.com/v2fly/v2ray-core/releases | grep /v2ray-core/releases/tag/ | head -1 | awk -F "[/]" '{print $6}' | awk -F "[>]" '{print $2}' | awk -F "[<]" '{print $1}') + fi - if [[ ! -z "${v2rayCoreVersion}" ]] - then - version=${v2rayCoreVersion} - fi - if [[ ! -z "$1" ]] - then - read -p "回退版本为${version}，是否继续？[y/n]:" rollbackV2RayStatus - if [[ "${rollbackV2RayStatus}" = "y" ]] - then - if [[ "${coreInstallType}" = "2" || "${coreInstallType}" = "3" ]] - then - echoContent green " ---> 当前v2ray-core版本:`/etc/v2ray-agent/v2ray/v2ray --version|awk '{print $2}'|head -1`" - elif [[ "${coreInstallType}" = "1" ]] - then - echoContent green " ---> 当前Xray-core版本:`/etc/v2ray-agent/xray/xray --version|awk '{print $2}'|head -1`" - fi + if [[ -n "${v2rayCoreVersion}" ]]; then + version=${v2rayCoreVersion} + fi + if [[ -n "$1" ]]; then + read -r -p "回退版本为${version}，是否继续？[y/n]:" rollbackV2RayStatus + if [[ "${rollbackV2RayStatus}" == "y" ]]; then + if [[ "${coreInstallType}" == "2" || "${coreInstallType}" == "3" ]]; then + echoContent green " ---> 当前v2ray-core版本:$(/etc/v2ray-agent/v2ray/v2ray --version | awk '{print $2}' | head -1)" + elif [[ "${coreInstallType}" == "1" ]]; then + echoContent green " ---> 当前Xray-core版本:$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)" + fi - handleV2Ray stop - rm -f /etc/v2ray-agent/v2ray/v2ray - rm -f /etc/v2ray-agent/v2ray/v2ctl - updateV2Ray ${version} - else - echoContent green " ---> 放弃回退版本" - fi - elif [[ "${version}" = "v`/etc/v2ray-agent/v2ray/v2ray --version|awk '{print $2}'|head -1`" ]] - then - read -p "当前版本与最新版相同，是否重新安装？[y/n]:" reInstallV2RayStatus - if [[ "${reInstallV2RayStatus}" = "y" ]] - then - handleV2Ray stop - rm -f /etc/v2ray-agent/v2ray/v2ray - rm -f /etc/v2ray-agent/v2ray/v2ctl - updateV2Ray - else - echoContent green " ---> 放弃重新安装" - fi - else - read -p "最新版本为：${version}，是否更新？[y/n]：" installV2RayStatus - if [[ "${installV2RayStatus}" = "y" ]] - then - rm -f /etc/v2ray-agent/v2ray/v2ray - rm -f /etc/v2ray-agent/v2ray/v2ctl - updateV2Ray - else - echoContent green " ---> 放弃更新" - fi + handleV2Ray stop + rm -f /etc/v2ray-agent/v2ray/v2ray + rm -f /etc/v2ray-agent/v2ray/v2ctl + updateV2Ray "${version}" + else + echoContent green " ---> 放弃回退版本" + fi + elif [[ "${version}" == "v$(/etc/v2ray-agent/v2ray/v2ray --version | awk '{print $2}' | head -1)" ]]; then + read -r -p "当前版本与最新版相同，是否重新安装？[y/n]:" reInstallV2RayStatus + if [[ "${reInstallV2RayStatus}" == "y" ]]; then + handleV2Ray stop + rm -f /etc/v2ray-agent/v2ray/v2ray + rm -f /etc/v2ray-agent/v2ray/v2ctl + updateV2Ray + else + echoContent green " ---> 放弃重新安装" + fi + else + read -r -p "最新版本为：${version}，是否更新？[y/n]：" installV2RayStatus + if [[ "${installV2RayStatus}" == "y" ]]; then + rm -f /etc/v2ray-agent/v2ray/v2ray + rm -f /etc/v2ray-agent/v2ray/v2ctl + updateV2Ray + else + echoContent green " ---> 放弃更新" + fi - fi - fi + fi + fi } # 更新Xray -updateXray(){ - readInstallType - if [[ -z "${coreInstallType}" ]] - then - if [[ ! -z "$1" ]] - then - version=$1 - else - version=`curl -s https://github.com/XTLS/Xray-core/releases|grep /XTLS/Xray-core/releases/tag/|head -1|awk '{print $3}'|awk -F "[<]" '{print $1}'` - fi +updateXray() { + readInstallType + if [[ -z "${coreInstallType}" ]]; then + if [[ -n "$1" ]]; then + version=$1 + else + version=$(curl -s https://github.com/XTLS/Xray-core/releases | grep /XTLS/Xray-core/releases/tag/ | head -1 | awk '{print $3}' | awk -F "[<]" '{print $1}') + fi - echoContent green " ---> Xray-core版本:${version}" + echoContent green " ---> Xray-core版本:${version}" - if [[ ! -z `wget --help|grep show-progress` ]] - then - wget -c -q --show-progress -P /etc/v2ray-agent/xray/ https://github.com/XTLS/Xray-core/releases/download/${version}/Xray-linux-64.zip - else - wget -c -P /etc/v2ray-agent/xray/ https://github.com/XTLS/Xray-core/releases/download/${version}/Xray-linux-64.zip > /dev/null 2>&1 - fi + if [[ -n $(wget --help | grep show-progress) ]]; then + wget -c -q --show-progress -P /etc/v2ray-agent/xray/ https://github.com/XTLS/Xray-core/releases/download/${version}/Xray-linux-64.zip + else + wget -c -P /etc/v2ray-agent/xray/ https://github.com/XTLS/Xray-core/releases/download/${version}/Xray-linux-64.zip >/dev/null 2>&1 + fi - unzip -o /etc/v2ray-agent/xray/Xray-linux-64.zip -d /etc/v2ray-agent/xray > /dev/null - rm -rf /etc/v2ray-agent/xray/Xray-linux-64.zip - chmod 655 /etc/v2ray-agent/xray/xray - handleXray stop - handleXray start - else - echoContent green " ---> 当前Xray-core版本:`/etc/v2ray-agent/xray/xray --version|awk '{print $2}'|head -1`" + unzip -o /etc/v2ray-agent/xray/Xray-linux-64.zip -d /etc/v2ray-agent/xray >/dev/null + rm -rf /etc/v2ray-agent/xray/Xray-linux-64.zip + chmod 655 /etc/v2ray-agent/xray/xray + handleXray stop + handleXray start + else + echoContent green " ---> 当前Xray-core版本:$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)" - if [[ ! -z "$1" ]] - then - version=$1 - else - version=`curl -s https://github.com/XTLS/Xray-core/releases|grep /XTLS/Xray-core/releases/tag/|head -1|awk '{print $3}'|awk -F "[<]" '{print $1}'` - fi + if [[ -n "$1" ]]; then + version=$1 + else + version=$(curl -s https://github.com/XTLS/Xray-core/releases | grep /XTLS/Xray-core/releases/tag/ | head -1 | awk '{print $3}' | awk -F "[<]" '{print $1}') + fi - if [[ ! -z "$1" ]] - then - read -p "回退版本为${version}，是否继续？[y/n]:" rollbackXrayStatus - if [[ "${rollbackXrayStatus}" = "y" ]] - then - echoContent green " ---> 当前Xray-core版本:`/etc/v2ray-agent/xray/xray --version|awk '{print $2}'|head -1`" + if [[ -n "$1" ]]; then + read -r -p "回退版本为${version}，是否继续？[y/n]:" rollbackXrayStatus + if [[ "${rollbackXrayStatus}" == "y" ]]; then + echoContent green " ---> 当前Xray-core版本:$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)" - handleXray stop - rm -f /etc/v2ray-agent/xray/xray - updateXray ${version} - else - echoContent green " ---> 放弃回退版本" - fi - elif [[ "${version}" = "v`/etc/v2ray-agent/xray/xray --version|awk '{print $2}'|head -1`" ]] - then - read -p "当前版本与最新版相同，是否重新安装？[y/n]:" reInstallXrayStatus - if [[ "${reInstallXrayStatus}" = "y" ]] - then - handleXray stop - rm -f /etc/v2ray-agent/xray/xray - rm -f /etc/v2ray-agent/xray/xray - updateXray - else - echoContent green " ---> 放弃重新安装" - fi - else - read -p "最新版本为：${version}，是否更新？[y/n]：" installXrayStatus - if [[ "${installXrayStatus}" = "y" ]] - then - rm -f /etc/v2ray-agent/xray/xray - updateXray - else - echoContent green " ---> 放弃更新" - fi + handleXray stop + rm -f /etc/v2ray-agent/xray/xray + updateXray "${version}" + else + echoContent green " ---> 放弃回退版本" + fi + elif [[ "${version}" == "v$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)" ]]; then + read -r -p "当前版本与最新版相同，是否重新安装？[y/n]:" reInstallXrayStatus + if [[ "${reInstallXrayStatus}" == "y" ]]; then + handleXray stop + rm -f /etc/v2ray-agent/xray/xray + rm -f /etc/v2ray-agent/xray/xray + updateXray + else + echoContent green " ---> 放弃重新安装" + fi + else + read -r -p "最新版本为：${version}，是否更新？[y/n]：" installXrayStatus + if [[ "${installXrayStatus}" == "y" ]]; then + rm -f /etc/v2ray-agent/xray/xray + updateXray + else + echoContent green " ---> 放弃更新" + fi - fi - fi + fi + fi } # 更新Trojan-Go -updateTrojanGo(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 更新Trojan-Go" - if [[ ! -d "/etc/v2ray-agent/trojan/" ]] - then - echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容" - menu - exit 0; - fi - if [[ -z `ls -F /etc/v2ray-agent/trojan/|grep "trojan-go"` ]] - then - version=`curl -s https://github.com/p4gefau1t/trojan-go/releases|grep /trojan-go/releases/tag/|head -1|awk -F "[/]" '{print $6}'|awk -F "[>]" '{print $2}'|awk -F "[<]" '{print $1}'` - echoContent green " ---> Trojan-Go版本:${version}" - if [[ ! -z `wget --help|grep show-progress` ]] - then - wget -c -q --show-progress -P /etc/v2ray-agent/trojan/ https://github.com/p4gefau1t/trojan-go/releases/download/${version}/trojan-go-linux-amd64.zip - else - wget -c -P /etc/v2ray-agent/trojan/ https://github.com/p4gefau1t/trojan-go/releases/download/${version}/trojan-go-linux-amd64.zip > /dev/null 2>&1 - fi - unzip -o /etc/v2ray-agent/trojan/trojan-go-linux-amd64.zip -d /etc/v2ray-agent/trojan > /dev/null - rm -rf /etc/v2ray-agent/trojan/trojan-go-linux-amd64.zip - handleTrojanGo stop - handleTrojanGo start - else - echoContent green " ---> 当前Trojan-Go版本:`/etc/v2ray-agent/trojan/trojan-go --version|awk '{print $2}'|head -1`" - if [[ ! -z `/etc/v2ray-agent/trojan/trojan-go --version` ]] - then - version=`curl -s https://github.com/p4gefau1t/trojan-go/releases|grep /trojan-go/releases/tag/|head -1|awk -F "[/]" '{print $6}'|awk -F "[>]" '{print $2}'|awk -F "[<]" '{print $1}'` - if [[ "${version}" = "`/etc/v2ray-agent/trojan/trojan-go --version|awk '{print $2}'|head -1`" ]] - then - read -p "当前版本与最新版相同，是否重新安装？[y/n]:" reInstalTrojanGoStatus - if [[ "${reInstalTrojanGoStatus}" = "y" ]] - then - handleTrojanGo stop - rm -rf /etc/v2ray-agent/trojan/trojan-go - updateTrojanGo 1 - else - echoContent green " ---> 放弃重新安装" - fi - else - read -p "最新版本为：${version}，是否更新？[y/n]：" installTrojanGoStatus - if [[ "${installTrojanGoStatus}" = "y" ]] - then - rm -rf /etc/v2ray-agent/trojan/trojan-go - updateTrojanGo 1 - else - echoContent green " ---> 放弃更新" - fi - fi - fi - fi +updateTrojanGo() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 更新Trojan-Go" + if [[ ! -d "/etc/v2ray-agent/trojan/" ]]; then + echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容" + menu + exit 0 + fi + if find /etc/v2ray-agent/trojan/ | grep -q "trojan-go"; then + version=$(curl -s https://github.com/p4gefau1t/trojan-go/releases | grep /trojan-go/releases/tag/ | head -1 | awk -F "[/]" '{print $6}' | awk -F "[>]" '{print $2}' | awk -F "[<]" '{print $1}') + echoContent green " ---> Trojan-Go版本:${version}" + if [[ -n $(wget --help | grep show-progress) ]]; then + wget -c -q --show-progress -P /etc/v2ray-agent/trojan/ https://github.com/p4gefau1t/trojan-go/releases/download/${version}/trojan-go-linux-amd64.zip + else + wget -c -P /etc/v2ray-agent/trojan/ https://github.com/p4gefau1t/trojan-go/releases/download/${version}/trojan-go-linux-amd64.zip >/dev/null 2>&1 + fi + unzip -o /etc/v2ray-agent/trojan/trojan-go-linux-amd64.zip -d /etc/v2ray-agent/trojan >/dev/null + rm -rf /etc/v2ray-agent/trojan/trojan-go-linux-amd64.zip + handleTrojanGo stop + handleTrojanGo start + else + echoContent green " ---> 当前Trojan-Go版本:$(/etc/v2ray-agent/trojan/trojan-go --version | awk '{print $2}' | head -1)" + if [[ -n $(/etc/v2ray-agent/trojan/trojan-go --version) ]]; then + version=$(curl -s https://github.com/p4gefau1t/trojan-go/releases | grep /trojan-go/releases/tag/ | head -1 | awk -F "[/]" '{print $6}' | awk -F "[>]" '{print $2}' | awk -F "[<]" '{print $1}') + if [[ "${version}" == "$(/etc/v2ray-agent/trojan/trojan-go --version | awk '{print $2}' | head -1)" ]]; then + read -r -p "当前版本与最新版相同，是否重新安装？[y/n]:" reInstalTrojanGoStatus + if [[ "${reInstalTrojanGoStatus}" == "y" ]]; then + handleTrojanGo stop + rm -rf /etc/v2ray-agent/trojan/trojan-go + updateTrojanGo 1 + else + echoContent green " ---> 放弃重新安装" + fi + else + read -r -p "最新版本为：${version}，是否更新？[y/n]：" installTrojanGoStatus + if [[ "${installTrojanGoStatus}" == "y" ]]; then + rm -rf /etc/v2ray-agent/trojan/trojan-go + updateTrojanGo 1 + else + echoContent green " ---> 放弃更新" + fi + fi + fi + fi } # 验证整个服务是否可用 -checkGFWStatue(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 验证服务启动状态" - if [[ ! -z `ps -ef|grep -v grep|grep v2ray` ]] - then - echoContent green " ---> 服务启动成功" - else - echoContent red " ---> 服务启动失败，请检查终端是否有日志打印" - exit 0 - fi +checkGFWStatue() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 验证服务启动状态" + if ps -ef | grep -q v2ray; then + echoContent green " ---> 服务启动成功" + else + echoContent red " ---> 服务启动失败，请检查终端是否有日志打印" + exit 0 + fi } # V2Ray开机自启 -installV2RayService(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 配置V2Ray开机自启" - if [[ ! -z `find /bin /usr/bin -name "systemctl"` ]] - then - rm -rf /etc/systemd/system/v2ray.service - touch /etc/systemd/system/v2ray.service - execStart='/etc/v2ray-agent/v2ray/v2ray -confdir /etc/v2ray-agent/v2ray/conf' - cat << EOF > /etc/systemd/system/v2ray.service +installV2RayService() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 配置V2Ray开机自启" + if [[ -n $(find /bin /usr/bin -name "systemctl") ]]; then + rm -rf /etc/systemd/system/v2ray.service + touch /etc/systemd/system/v2ray.service + execStart='/etc/v2ray-agent/v2ray/v2ray -confdir /etc/v2ray-agent/v2ray/conf' + cat </etc/systemd/system/v2ray.service [Unit] Description=V2Ray - A unified platform for anti-censorship Documentation=https://v2ray.com https://guide.v2fly.org @@ -1329,21 +1173,20 @@ RestartPreventExitStatus=23 [Install] WantedBy=multi-user.target EOF - systemctl daemon-reload - systemctl enable v2ray.service - echoContent green " ---> 配置V2Ray开机自启成功" - fi + systemctl daemon-reload + systemctl enable v2ray.service + echoContent green " ---> 配置V2Ray开机自启成功" + fi } # Xray开机自启 -installXrayService(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 配置Xray开机自启" - if [[ ! -z `find /bin /usr/bin -name "systemctl"` ]] - then - rm -rf /etc/systemd/system/xray.service - touch /etc/systemd/system/xray.service - execStart='/etc/v2ray-agent/xray/xray run -confdir /etc/v2ray-agent/xray/conf' - cat << EOF > /etc/systemd/system/xray.service +installXrayService() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 配置Xray开机自启" + if [[ -n $(find /bin /usr/bin -name "systemctl") ]]; then + rm -rf /etc/systemd/system/xray.service + touch /etc/systemd/system/xray.service + execStart='/etc/v2ray-agent/xray/xray run -confdir /etc/v2ray-agent/xray/conf' + cat </etc/systemd/system/xray.service [Unit] Description=Xray - A unified platform for anti-censorship # Documentation=https://v2ray.com https://guide.v2fly.org @@ -1363,20 +1206,19 @@ RestartPreventExitStatus=23 [Install] WantedBy=multi-user.target EOF - systemctl daemon-reload - systemctl enable xray.service - echoContent green " ---> 配置Xray开机自启成功" - fi + systemctl daemon-reload + systemctl enable xray.service + echoContent green " ---> 配置Xray开机自启成功" + fi } # Trojan开机自启 -installTrojanService(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 配置Trojan开机自启" - if [[ ! -z `find /bin /usr/bin -name "systemctl"` ]] - then - rm -rf /etc/systemd/system/trojan-go.service - touch /etc/systemd/system/trojan-go.service +installTrojanService() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 配置Trojan开机自启" + if [[ -n $(find /bin /usr/bin -name "systemctl") ]]; then + rm -rf /etc/systemd/system/trojan-go.service + touch /etc/systemd/system/trojan-go.service - cat << EOF > /etc/systemd/system/trojan-go.service + cat </etc/systemd/system/trojan-go.service [Unit] Description=Trojan-Go - A unified platform for anti-censorship Documentation=Trojan-Go @@ -1396,167 +1238,122 @@ RestartPreventExitStatus=23 [Install] WantedBy=multi-user.target EOF - systemctl daemon-reload - systemctl enable trojan-go.service - echoContent green " ---> 配置Trojan开机自启成功" - fi + systemctl daemon-reload + systemctl enable trojan-go.service + echoContent green " ---> 配置Trojan开机自启成功" + fi } # 操作V2Ray -handleV2Ray(){ - if [[ ! -z `find /bin /usr/bin -name "systemctl"` ]] && [[ ! -z `ls /etc/systemd/system/|grep -v grep|grep v2ray.service` ]] - then - if [[ -z `ps -ef|grep -v grep|grep "v2ray/v2ray"` ]] && [[ "$1" = "start" ]] - then - systemctl start v2ray.service - elif [[ ! -z `ps -ef|grep -v grep|grep "v2ray/v2ray"` ]] && [[ "$1" = "stop" ]] - then - systemctl stop v2ray.service - fi - elif [[ -z `find /bin /usr/bin -name "systemctl"` ]] - then - if [[ -z `ps -ef|grep -v grep|grep v2ray` ]] && [[ "$1" = "start" ]] - then - /usr/bin/v2ray/v2ray -config /etc/v2ray-agent/v2ray/config_full.json & > /dev/null 2>&1 - elif [[ ! -z `ps -ef|grep -v grep|grep v2ray` ]] && [[ "$1" = "stop" ]] - then - ps -ef|grep -v grep|grep v2ray|awk '{print $2}'|xargs kill -9 - fi - fi - sleep 0.5 - if [[ "$1" = "start" ]] - then - if [[ ! -z `ps -ef|grep -v grep|grep "v2ray/v2ray"` ]] - then - echoContent green " ---> V2Ray启动成功" - else - echoContent red "V2Ray启动失败" - echoContent red "执行 [ps -ef|grep v2ray] 查看日志" - exit 0; - fi - elif [[ "$1" = "stop" ]] - then - if [[ -z `ps -ef|grep -v grep|grep "v2ray/v2ray"` ]] - then - echoContent green " ---> V2Ray关闭成功" - else - echoContent red "V2Ray关闭失败" - echoContent red "请手动执行【ps -ef|grep -v grep|grep v2ray|awk '{print \$2}'|xargs kill -9】" - exit 0; - fi - fi +handleV2Ray() { + # shellcheck disable=SC2010 + if find /bin /usr/bin | grep -q systemctl && ls /etc/systemd/system/*v2ray* | grep -q v2ray.service; then + if [[ -z "$(pgrep -f v2ray/v2ray)" ]] && [[ "$1" == "start" ]]; then + systemctl start v2ray.service + elif [[ -z "$(pgrep -f v2ray/v2ray)" ]] && [[ "$1" == "stop" ]]; then + systemctl stop v2ray.service + fi + fi + sleep 0.5 + + if [[ "$1" == "start" ]]; then + if pgrep -f "v2ray/v2ray"; then + echoContent green " ---> V2Ray启动成功" + else + echoContent red "V2Ray启动失败" + echoContent red "执行 [ps -ef|grep v2ray] 查看日志" + exit 0 + fi + elif [[ "$1" == "stop" ]]; then + if ! ps -ef | grep -q "v2ray/v2ray"; then + echoContent green " ---> V2Ray关闭成功" + else + echoContent red "V2Ray关闭失败" + echoContent red "请手动执行【ps -ef|grep -v grep|grep v2ray|awk '{print \$2}'|xargs kill -9】" + exit 0 + fi + fi } # 操作xray -handleXray(){ - if [[ ! -z `find /bin /usr/bin -name "systemctl"` ]] && [[ ! -z `ls /etc/systemd/system/|grep -v grep|grep xray.service` ]] - then - if [[ -z `ps -ef|grep -v grep|grep "xray/xray"` ]] && [[ "$1" = "start" ]] - then - systemctl start xray.service - elif [[ ! -z `ps -ef|grep -v grep|grep "xray/xray"` ]] && [[ "$1" = "stop" ]] - then - systemctl stop xray.service - fi - elif [[ -z `find /bin /usr/bin -name "systemctl"` ]] - then - if [[ -z `ps -ef|grep -v grep|grep xray` ]] && [[ "$1" = "start" ]] - then - /etc/v2ray-agent/xray/xray -config /etc/v2ray-agent/xray/02_VLESS_TCP_inbounds.json & > /dev/null 2>&1 - elif [[ ! -z `ps -ef|grep -v grep|grep xray` ]] && [[ "$1" = "stop" ]] - then - ps -ef|grep -v grep|grep xray|awk '{print $2}'|xargs kill -9 - fi - fi - sleep 0.5 - if [[ "$1" = "start" ]] - then - if [[ ! -z `ps -ef|grep -v grep|grep "xray/xray"` ]] - then - echoContent green " ---> Xray启动成功" - else - echoContent red "xray启动失败" - echoContent red "执行 [ps -ef|grep xray] 查看日志" - exit 0; - fi - elif [[ "$1" = "stop" ]] - then - if [[ -z `ps -ef|grep -v grep|grep "xray/xray"` ]] - then - echoContent green " ---> Xray关闭成功" - else - echoContent red "xray关闭失败" - echoContent red "请手动执行【ps -ef|grep -v grep|grep xray|awk '{print \$2}'|xargs kill -9】" - exit 0; - fi - fi +handleXray() { + if [[ -n $(find /bin /usr/bin -name "systemctl") ]] && ls /etc/systemd/system/ | grep -q xray.service; then + if ps -ef | !grep -q "xray/xray" && [[ "$1" == "start" ]]; then + systemctl start xray.service + elif ps -ef | grep -q "xray/xray" && [[ "$1" == "stop" ]]; then + systemctl stop xray.service + fi + fi + + sleep 0.5 + + if [[ "$1" == "start" ]]; then + if ps -ef | grep -q "xray/xray"; then + echoContent green " ---> Xray启动成功" + else + echoContent red "xray启动失败" + echoContent red "执行 [ps -ef|grep xray] 查看日志" + exit 0 + fi + elif [[ "$1" == "stop" ]]; then + if ps -ef | !grep -q "xray/xray"; then + echoContent green " ---> Xray关闭成功" + else + echoContent red "xray关闭失败" + echoContent red "请手动执行【ps -ef|grep -v grep|grep xray|awk '{print \$2}'|xargs kill -9】" + exit 0 + fi + fi } + # 操作Trojan-Go -handleTrojanGo(){ - if [[ ! -z `find /bin /usr/bin -name "systemctl"` ]] && [[ ! -z `ls /etc/systemd/system/|grep -v grep|grep trojan-go.service` ]] - then - if [[ -z `ps -ef|grep -v grep|grep trojan-go` ]] && [[ "$1" = "start" ]] - then - systemctl start trojan-go.service - elif [[ ! -z `ps -ef|grep -v grep|grep trojan-go` ]] && [[ "$1" = "stop" ]] - then - systemctl stop trojan-go.service - fi - elif [[ -z `find /bin /usr/bin -name "systemctl"` ]] - then - if [[ -z `ps -ef|grep -v grep|grep trojan-go` ]] && [[ "$1" = "start" ]] - then - /etc/v2ray-agent/trojan/trojan-go -config /etc/v2ray-agent/trojan/config_full.json & > /dev/null 2>&1 - elif [[ ! -z `ps -ef|grep -v grep|grep trojan-go` ]] && [[ "$1" = "stop" ]] - then - ps -ef|grep -v grep|grep trojan-go|awk '{print $2}'|xargs kill -9 - fi - fi - sleep 0.5 - if [[ "$1" = "start" ]] - then - if [[ ! -z `ps -ef|grep -v grep|grep trojan-go` ]] - then - echoContent green " ---> Trojan-Go启动成功" - else - echoContent red "Trojan-Go启动失败" - echoContent red "请手动执行【/etc/v2ray-agent/trojan/trojan-go -config /etc/v2ray-agent/trojan/config_full.json】,查看错误日志" - exit 0; - fi - elif [[ "$1" = "stop" ]] - then - if [[ -z `ps -ef|grep -v grep|grep trojan-go` ]] - then - echoContent green " ---> Trojan-Go关闭成功" - else - echoContent red "Trojan-Go关闭失败" - echoContent red "请手动执行【ps -ef|grep -v grep|grep trojan-go|awk '{print \$2}'|xargs kill -9】" - exit 0; - fi - fi +handleTrojanGo() { + if [[ -n $(find /bin /usr/bin -name "systemctl") ]] && ls /etc/systemd/system/ | grep -q trojan-go.service; then + if ps -ef | !grep -q trojan-go && [[ "$1" == "start" ]]; then + systemctl start trojan-go.service + elif ps -ef | grep -q trojan-go && [[ "$1" == "stop" ]]; then + systemctl stop trojan-go.service + fi + fi + + sleep 0.5 + if [[ "$1" == "start" ]]; then + if ps -ef | grep -q trojan-go; then + echoContent green " ---> Trojan-Go启动成功" + else + echoContent red "Trojan-Go启动失败" + echoContent red "请手动执行【/etc/v2ray-agent/trojan/trojan-go -config /etc/v2ray-agent/trojan/config_full.json】,查看错误日志" + exit 0 + fi + elif [[ "$1" == "stop" ]]; then + if ps -ef | !grep -q trojan-go; then + echoContent green " ---> Trojan-Go关闭成功" + else + echoContent red "Trojan-Go关闭失败" + echoContent red "请手动执行【ps -ef|grep -v grep|grep trojan-go|awk '{print \$2}'|xargs kill -9】" + exit 0 + fi + fi } # 初始化V2Ray 配置文件 -initV2RayConfig(){ - echoContent skyBlue "\n进度 $2/${totalProgress} : 初始化V2Ray配置" - if [[ ! -z "${currentUUID}" ]] - then - echo - read -p "读取到上次安装记录，是否使用上次安装时的UUID ？[y/n]:" historyUUIDStatus - if [[ "${historyUUIDStatus}" = "y" ]] - then - uuid=${currentUUID} - fi - else - uuid=`/etc/v2ray-agent/v2ray/v2ctl uuid` - fi - if [[ -z "${uuid}" ]] - then - echoContent red "\n ---> uuid读取错误，重新生成" - uuid=`/etc/v2ray-agent/v2ray/v2ctl uuid` - fi +initV2RayConfig() { + echoContent skyBlue "\n进度 $2/${totalProgress} : 初始化V2Ray配置" + if [[ -n "${currentUUID}" ]]; then + echo + read -r -p "读取到上次安装记录，是否使用上次安装时的UUID ？[y/n]:" historyUUIDStatus + if [[ "${historyUUIDStatus}" == "y" ]]; then + uuid=${currentUUID} + fi + else + uuid=$(/etc/v2ray-agent/v2ray/v2ctl uuid) + fi + if [[ -z "${uuid}" ]]; then + echoContent red "\n ---> uuid读取错误，重新生成" + uuid=$(/etc/v2ray-agent/v2ray/v2ctl uuid) + fi - rm -rf /etc/v2ray-agent/v2ray/conf/* - rm -rf /etc/v2ray-agent/v2ray/config_full.json + rm -rf /etc/v2ray-agent/v2ray/conf/* + rm -rf /etc/v2ray-agent/v2ray/config_full.json - cat << EOF > /etc/v2ray-agent/v2ray/conf/00_log.json + cat </etc/v2ray-agent/v2ray/conf/00_log.json { "log": { "error": "/etc/v2ray-agent/v2ray/v2ray_error.log", @@ -1564,8 +1361,8 @@ initV2RayConfig(){ } } EOF - # routing - cat << EOF > /etc/v2ray-agent/v2ray/conf/09_routing.json + # routing + cat </etc/v2ray-agent/v2ray/conf/09_routing.json { "routing":{ "domainStrategy": "AsIs", @@ -1581,10 +1378,9 @@ EOF } } EOF - # outbounds - if [[ ! -z "${pingIPv6}" ]] - then - cat << EOF > /etc/v2ray-agent/v2ray/conf/10_ipv6_outbounds.json + # outbounds + if [[ -n "${pingIPv6}" ]]; then + cat </etc/v2ray-agent/v2ray/conf/10_ipv6_outbounds.json { "outbounds": [ { @@ -1595,9 +1391,9 @@ EOF ] } EOF -else + else - cat << EOF > /etc/v2ray-agent/v2ray/conf/10_ipv4_outbounds.json + cat </etc/v2ray-agent/v2ray/conf/10_ipv4_outbounds.json { "outbounds": [ { @@ -1610,10 +1406,9 @@ else ] } EOF -fi + fi - - cat << EOF > /etc/v2ray-agent/v2ray/conf/10_bt_outbounds.json + cat </etc/v2ray-agent/v2ray/conf/10_bt_outbounds.json { "outbounds": [ { @@ -1625,9 +1420,8 @@ fi } EOF - - # dns - cat << EOF > /etc/v2ray-agent/v2ray/conf/11_dns.json + # dns + cat </etc/v2ray-agent/v2ray/conf/11_dns.json { "dns": { "servers": [ @@ -1640,21 +1434,19 @@ EOF } } EOF - # VLESS_TCP_TLS/XTLS - # 回落nginx - local fallbacksList='{"dest":31300,"xver":0}' + # VLESS_TCP_TLS/XTLS + # 回落nginx + local fallbacksList='{"dest":31300,"xver":0}' - if [[ ! -z `echo ${selectCustomInstallType}|grep 4` || "$1" = "all" ]] - then - # 回落trojan-go - fallbacksList='{"dest":31296,"xver":0}' - fi + if echo "${selectCustomInstallType}" | grep -q 4 || [[ "$1" == "all" ]]; then + # 回落trojan-go + fallbacksList='{"dest":31296,"xver":0}' + fi - # VLESS_WS_TLS - if [[ ! -z `echo ${selectCustomInstallType}|grep 1` || "$1" = "all" ]] - then - fallbacksList=${fallbacksList}',{"path":"/'${customPath}'ws","dest":31297,"xver":1}' - cat << EOF > /etc/v2ray-agent/v2ray/conf/03_VLESS_WS_inbounds.json + # VLESS_WS_TLS + if echo "${selectCustomInstallType}" | grep -q 1 || [[ "$1" == "all" ]]; then + fallbacksList=${fallbacksList}',{"path":"/'${customPath}'ws","dest":31297,"xver":1}' + cat </etc/v2ray-agent/v2ray/conf/03_VLESS_WS_inbounds.json { "inbounds":[ { @@ -1682,13 +1474,12 @@ EOF ] } EOF - fi + fi - # VMess_TCP - if [[ ! -z `echo ${selectCustomInstallType}|grep 2` || "$1" = "all" ]] - then - fallbacksList=${fallbacksList}',{"path":"/'${customPath}'tcp","dest":31298,"xver":1}' - cat << EOF > /etc/v2ray-agent/v2ray/conf/04_VMess_TCP_inbounds.json + # VMess_TCP + if echo "${selectCustomInstallType}" | grep -q 2 || [[ "$1" == "all" ]]; then + fallbacksList=${fallbacksList}',{"path":"/'${customPath}'tcp","dest":31298,"xver":1}' + cat </etc/v2ray-agent/v2ray/conf/04_VMess_TCP_inbounds.json { "inbounds":[ { @@ -1724,13 +1515,12 @@ EOF ] } EOF - fi + fi - # VMess_WS - if [[ ! -z `echo ${selectCustomInstallType}|grep 3` || "$1" = "all" ]] - then - fallbacksList=${fallbacksList}',{"path":"/'${customPath}'vws","dest":31299,"xver":1}' - cat << EOF > /etc/v2ray-agent/v2ray/conf/05_VMess_WS_inbounds.json + # VMess_WS + if echo "${selectCustomInstallType}" | grep -q 3 || [[ "$1" == "all" ]]; then + fallbacksList=${fallbacksList}',{"path":"/'${customPath}'vws","dest":31299,"xver":1}' + cat </etc/v2ray-agent/v2ray/conf/05_VMess_WS_inbounds.json { "inbounds":[ { @@ -1759,12 +1549,11 @@ EOF ] } EOF - fi + fi - # VLESS_TCP - if [[ "${selectCoreType}" = "2" ]] - then - cat << EOF > /etc/v2ray-agent/v2ray/conf/02_VLESS_TCP_inbounds.json + # VLESS_TCP + if [[ "${selectCoreType}" == "2" ]]; then + cat </etc/v2ray-agent/v2ray/conf/02_VLESS_TCP_inbounds.json { "inbounds":[ { @@ -1803,9 +1592,8 @@ EOF ] } EOF - elif [[ "${selectCoreType}" = "3" ]] - then - cat << EOF > /etc/v2ray-agent/v2ray/conf/02_VLESS_TCP_inbounds.json + elif [[ "${selectCoreType}" == "3" ]]; then + cat </etc/v2ray-agent/v2ray/conf/02_VLESS_TCP_inbounds.json { "inbounds":[ { @@ -1845,35 +1633,32 @@ EOF ] } EOF - fi + fi } # 初始化Xray 配置文件 -initXrayConfig(){ - echoContent skyBlue "\n进度 $2/${totalProgress} : 初始化Xray配置" - if [[ ! -z "${currentUUID}" ]] - then - echo - read -p "读取到上次安装记录，是否使用上次安装时的UUID ？[y/n]:" historyUUIDStatus - if [[ "${historyUUIDStatus}" = "y" ]] - then - uuid=${currentUUID} - fi - else - uuid=`/etc/v2ray-agent/xray/xray uuid` - fi - if [[ -z "${uuid}" ]] - then - echoContent red "\n ---> uuid读取错误，重新生成" - uuid=`/etc/v2ray-agent/xray/xray uuid` - fi +initXrayConfig() { + echoContent skyBlue "\n进度 $2/${totalProgress} : 初始化Xray配置" + if [[ -n "${currentUUID}" ]]; then + echo + read -r -p "读取到上次安装记录，是否使用上次安装时的UUID ？[y/n]:" historyUUIDStatus + if [[ "${historyUUIDStatus}" == "y" ]]; then + uuid=${currentUUID} + fi + else + uuid=$(/etc/v2ray-agent/xray/xray uuid) + fi + if [[ -z "${uuid}" ]]; then + echoContent red "\n ---> uuid读取错误，重新生成" + uuid=$(/etc/v2ray-agent/xray/xray uuid) + fi - echoContent green "\n ---> 使用成功" + echoContent green "\n ---> 使用成功" - rm -rf /etc/v2ray-agent/xray/conf/* + rm -rf /etc/v2ray-agent/xray/conf/* - # log - cat << EOF > /etc/v2ray-agent/xray/conf/00_log.json + # log + cat </etc/v2ray-agent/xray/conf/00_log.json { "log": { "error": "/etc/v2ray-agent/xray/xray_error.log", @@ -1881,8 +1666,8 @@ initXrayConfig(){ } } EOF - # routing - cat << EOF > /etc/v2ray-agent/xray/conf/09_routing.json + # routing + cat </etc/v2ray-agent/xray/conf/09_routing.json { "routing":{ "domainStrategy": "AsIs", @@ -1899,10 +1684,9 @@ EOF } EOF - # outbounds - if [[ ! -z "${pingIPv6}" ]] - then - cat << EOF > /etc/v2ray-agent/xray/conf/10_ipv6_outbounds.json + # outbounds + if [[ -n "${pingIPv6}" ]]; then + cat </etc/v2ray-agent/xray/conf/10_ipv6_outbounds.json { "outbounds": [ { @@ -1914,8 +1698,8 @@ EOF } EOF -else - cat << EOF > /etc/v2ray-agent/xray/conf/10_ipv4_outbounds.json + else + cat </etc/v2ray-agent/xray/conf/10_ipv4_outbounds.json { "outbounds": [ { @@ -1928,9 +1712,9 @@ else ] } EOF -fi + fi - cat << EOF > /etc/v2ray-agent/xray/conf/10_bt_outbounds.json + cat </etc/v2ray-agent/xray/conf/10_bt_outbounds.json { "outbounds": [ { @@ -1942,8 +1726,8 @@ fi } EOF - # dns - cat << EOF > /etc/v2ray-agent/xray/conf/11_dns.json + # dns + cat </etc/v2ray-agent/xray/conf/11_dns.json { "dns": { "servers": [ @@ -1956,21 +1740,19 @@ EOF } } EOF - # VLESS_TCP_TLS/XTLS - # 回落nginx - local fallbacksList='{"dest":31300,"xver":0}' + # VLESS_TCP_TLS/XTLS + # 回落nginx + local fallbacksList='{"dest":31300,"xver":0}' - if [[ ! -z `echo ${selectCustomInstallType}|grep 4` || "$1" = "all" ]] - then - # 回落trojan-go - fallbacksList='{"dest":31296,"xver":0}' - fi + if echo "${selectCustomInstallType}" | grep -q 4 || [[ "$1" == "all" ]]; then + # 回落trojan-go + fallbacksList='{"dest":31296,"xver":0}' + fi - # VLESS_WS_TLS - if [[ ! -z `echo ${selectCustomInstallType}|grep 1` || "$1" = "all" ]] - then - fallbacksList=${fallbacksList}',{"path":"/'${customPath}'ws","dest":31297,"xver":1}' - cat << EOF > /etc/v2ray-agent/xray/conf/03_VLESS_WS_inbounds.json + # VLESS_WS_TLS + if echo "${selectCustomInstallType}" | grep -q 1 || [[ "$1" == "all" ]]; then + fallbacksList=${fallbacksList}',{"path":"/'${customPath}'ws","dest":31297,"xver":1}' + cat </etc/v2ray-agent/xray/conf/03_VLESS_WS_inbounds.json { "inbounds":[ { @@ -1998,13 +1780,12 @@ EOF ] } EOF - fi + fi - # VMess_TCP - if [[ ! -z `echo ${selectCustomInstallType}|grep 2` || "$1" = "all" ]] - then - fallbacksList=${fallbacksList}',{"path":"/'${customPath}'tcp","dest":31298,"xver":1}' - cat << EOF > /etc/v2ray-agent/xray/conf/04_VMess_TCP_inbounds.json + # VMess_TCP + if [[ -n $(echo ${selectCustomInstallType} | grep 2) || "$1" == "all" ]]; then + fallbacksList=${fallbacksList}',{"path":"/'${customPath}'tcp","dest":31298,"xver":1}' + cat </etc/v2ray-agent/xray/conf/04_VMess_TCP_inbounds.json { "inbounds":[ { @@ -2040,13 +1821,12 @@ EOF ] } EOF - fi + fi - # VMess_WS - if [[ ! -z `echo ${selectCustomInstallType}|grep 3` || "$1" = "all" ]] - then - fallbacksList=${fallbacksList}',{"path":"/'${customPath}'vws","dest":31299,"xver":1}' - cat << EOF > /etc/v2ray-agent/xray/conf/05_VMess_WS_inbounds.json + # VMess_WS + if [[ -n $(echo ${selectCustomInstallType} | grep 3) || "$1" == "all" ]]; then + fallbacksList=${fallbacksList}',{"path":"/'${customPath}'vws","dest":31299,"xver":1}' + cat </etc/v2ray-agent/xray/conf/05_VMess_WS_inbounds.json { "inbounds":[ { @@ -2075,10 +1855,10 @@ EOF ] } EOF - fi + fi - # VLESS_TCP - cat << EOF > /etc/v2ray-agent/xray/conf/02_VLESS_TCP_inbounds.json + # VLESS_TCP + cat </etc/v2ray-agent/xray/conf/02_VLESS_TCP_inbounds.json { "inbounds":[ { @@ -2124,10 +1904,10 @@ EOF } # 初始化Trojan-Go配置 -initTrojanGoConfig(){ +initTrojanGoConfig() { - echoContent skyBlue "\n进度 $1/${totalProgress} : 初始化Trojan配置" - cat << EOF > /etc/v2ray-agent/trojan/config_full.json + echoContent skyBlue "\n进度 $1/${totalProgress} : 初始化Trojan配置" + cat </etc/v2ray-agent/trojan/config_full.json { "run_type": "server", "local_addr": "127.0.0.1", @@ -2165,735 +1945,668 @@ EOF } # 自定义CDN IP -customCDNIP(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 添加DNS智能解析" - echoContent yellow "\n 移动:104.19.45.117" - echoContent yellow " 联通:amp.cloudflare.com" - echoContent yellow " 电信:www.digitalocean.com" - echoContent skyBlue "----------------------------" - read -p '是否使用？[y/n]:' dnsProxy - if [[ "${dnsProxy}" = "y" ]] - then - add="domain08.qiu4.ml" - echoContent green "\n ---> 使用成功" - else - add="${domain}" - fi +customCDNIP() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 添加DNS智能解析" + echoContent yellow "\n 移动:104.19.45.117" + echoContent yellow " 联通:amp.cloudflare.com" + echoContent yellow " 电信:www.digitalocean.com" + echoContent skyBlue "----------------------------" + read -r -p '是否使用？[y/n]:' dnsProxy + if [[ "${dnsProxy}" == "y" ]]; then + add="domain08.qiu4.ml" + echoContent green "\n ---> 使用成功" + else + add="${domain}" + fi } # 通用 -defaultBase64Code(){ - local type=$1 - local ps=$2 - local id=$3 - local hostPort=$4 - local host= - local port= - if [[ ! -z `echo ${hostPort}|grep ":"` ]] - then - host=`echo ${hostPort}|awk -F "[:]" '{print $1}'` - port=`echo ${hostPort}|awk -F "[:]" '{print $2}'` - else - host=${hostPort} - port=443 - fi +defaultBase64Code() { + local type=$1 + local ps=$2 + local id=$3 + local hostPort=$4 + local host= + local port= + if echo "${hostPort}" | grep -q ":"; then + host=$(echo "${hostPort}" | awk -F "[:]" '{print $1}') + port=$(echo "${hostPort}" | awk -F "[:]" '{print $2}') + else + host=${hostPort} + port=443 + fi - local path=$5 - local add=$6 - if [[ "${type}" = "vlesstcp" ]] - then - local VLESSID=`echo ${id}|awk -F "[\"]" '{print $2}'` - local VLESSEmail=`echo ${ps}|awk -F "[\"]" '{print $2}'` - if [[ "${coreInstallType}" = "1" ]] - then - echoContent yellow " ---> 通用格式(VLESS+TCP+TLS/xtls-rprx-direct)" - echoContent green " vless://${VLESSID}@${host}:${port}?encryption=none&security=xtls&type=tcp&host=${host}&headerType=none&flow=xtls-rprx-direct#${VLESSEmail}\n" - echoContent yellow " ---> 二维码 VLESS(VLESS+TCP+TLS/xtls-rprx-direct)" - echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3A%2F%2F${VLESSID}%40${host}%3A${port}%3F${encryption}%3Dnone%26security%3Dxtls%26type%3Dtcp%26${host}%3D${host}%26headerType%3Dnone%26flow%3Dxtls-rprx-direct%23${VLESSEmail}\n" + local path=$5 + local add=$6 + if [[ "${type}" == "vlesstcp" ]]; then + local VLESSID + VLESSID=$(echo "${id}" | awk -F "[\"]" '{print $2}') + local VLESSEmail + VLESSEmail=$(echo "${ps}" | awk -F "[\"]" '{print $2}') - echoContent yellow " ---> 通用格式(VLESS+TCP+TLS/xtls-rprx-splice)" - echoContent green " vless://${VLESSID}@${host}:${port}?encryption=none&security=xtls&type=tcp&host=${host}&headerType=none&flow=xtls-rprx-splice#${VLESSEmail}\n" - echoContent yellow " ---> 二维码 VLESS(VLESS+TCP+TLS/xtls-rprx-splice)" - echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3A%2F%2F${VLESSID}%40${host}%3A${port}%3F${encryption}%3Dnone%26security%3Dxtls%26type%3Dtcp%26${host}%3D${host}%26headerType%3Dnone%26flow%3Dxtls-rprx-splice%23${VLESSEmail}\n" + if [[ "${coreInstallType}" == "1" ]]; then + echoContent yellow " ---> 通用格式(VLESS+TCP+TLS/xtls-rprx-direct)" + echoContent green " vless://${VLESSID}@${host}:${port}?encryption=none&security=xtls&type=tcp&host=${host}&headerType=none&flow=xtls-rprx-direct#${VLESSEmail}\n" + echoContent yellow " ---> 二维码 VLESS(VLESS+TCP+TLS/xtls-rprx-direct)" + echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3A%2F%2F${VLESSID}%40${host}%3A${port}%3F${encryption}%3Dnone%26security%3Dxtls%26type%3Dtcp%26${host}%3D${host}%26headerType%3Dnone%26flow%3Dxtls-rprx-direct%23${VLESSEmail}\n" - elif [[ "${coreInstallType}" = "2" || "${coreInstallType}" = "3" ]] - then - echoContent yellow " ---> 通用格式(VLESS+TCP+TLS)" - echoContent green " vless://${VLESSID}@${host}:${port}?security=tls&encryption=none&host=${host}&headerType=none&type=tcp#${VLESSEmail}\n" - echoContent yellow " ---> 二维码 VLESS(VLESS+TCP+TLS)" - echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3a%2f%2f${VLESSID}%40${host}%3a${port}%3fsecurity%3dtls%26encryption%3dnone%26host%3d${host}%26headerType%3dnone%26type%3dtcp%23${VLESSEmail}\n" - fi + echoContent yellow " ---> 通用格式(VLESS+TCP+TLS/xtls-rprx-splice)" + echoContent green " vless://${VLESSID}@${host}:${port}?encryption=none&security=xtls&type=tcp&host=${host}&headerType=none&flow=xtls-rprx-splice#${VLESSEmail}\n" + echoContent yellow " ---> 二维码 VLESS(VLESS+TCP+TLS/xtls-rprx-splice)" + echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3A%2F%2F${VLESSID}%40${host}%3A${port}%3F${encryption}%3Dnone%26security%3Dxtls%26type%3Dtcp%26${host}%3D${host}%26headerType%3Dnone%26flow%3Dxtls-rprx-splice%23${VLESSEmail}\n" - elif [[ "${type}" = "vmessws" ]] - then - qrCodeBase64Default=`echo -n '{"port":"'${port}'","ps":'${ps}',"tls":"tls","id":'"${id}"',"aid":"1","v":"2","host":"'${host}'","type":"none","path":"/'${path}'","net":"ws","add":"'${add}'","allowInsecure":0,"method":"none","peer":"'${host}'"}'|sed 's#/#\\\/#g'|base64` - qrCodeBase64Default=`echo ${qrCodeBase64Default}|sed 's/ //g'` - echoContent yellow " ---> 通用json(VMess+WS+TLS)" - echoContent green ' {"port":"'${port}'","ps":'${ps}',"tls":"tls","id":'"${id}"',"aid":"1","v":"2","host":"'${host}'","type":"none","path":"/'${path}'","net":"ws","add":"'${add}'","allowInsecure":0,"method":"none","peer":"'${host}'"}\n' - echoContent yellow " ---> 通用vmess(VMess+WS+TLS)链接" - echoContent green " vmess://${qrCodeBase64Default}\n" - echoContent yellow " ---> 二维码 vmess(VMess+WS+TLS)" - echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vmess://${qrCodeBase64Default}\n" + elif [[ "${coreInstallType}" == "2" || "${coreInstallType}" == "3" ]]; then + echoContent yellow " ---> 通用格式(VLESS+TCP+TLS)" + echoContent green " vless://${VLESSID}@${host}:${port}?security=tls&encryption=none&host=${host}&headerType=none&type=tcp#${VLESSEmail}\n" + echoContent yellow " ---> 二维码 VLESS(VLESS+TCP+TLS)" + echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3a%2f%2f${VLESSID}%40${host}%3a${port}%3fsecurity%3dtls%26encryption%3dnone%26host%3d${host}%26headerType%3dnone%26type%3dtcp%23${VLESSEmail}\n" + fi - elif [[ "${type}" = "vmesstcp" ]] - then - qrCodeBase64Default=`echo -n '{"port":"'${port}'","ps":'${ps}',"tls":"tls","id":'"${id}"',"aid":"1","v":"2","host":"'${host}'","type":"http","path":"/'${path}'","net":"tcp","add":"'${add}'","allowInsecure":0,"method":"none","peer":"'${host}'","obfs":"http","obfsParam":"'${host}'"}'|sed 's#/#\\\/#g'|base64` - qrCodeBase64Default=`echo ${qrCodeBase64Default}|sed 's/ //g'` - echoContent yellow " ---> 通用json(VMess+TCP+TLS)" - echoContent green ' {"port":"'${port}'","ps":'${ps}',"tls":"tls","id":'"${id}"',"aid":"1","v":"2","host":"'${host}'","type":"http","path":"/'${path}'","net":"tcp","add":"'${add}'","allowInsecure":0,"method":"none","peer":"'${host}'","obfs":"http","obfsParam":"'${host}'"}\n' - echoContent yellow " ---> 通用vmess(VMess+TCP+TLS)链接" - echoContent green " vmess://${qrCodeBase64Default}\n" - echoContent yellow " ---> 二维码 vmess(VMess+TCP+TLS)" - echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vmess://${qrCodeBase64Default}\n" + elif [[ "${type}" == "vmessws" ]]; then + qrCodeBase64Default=$(echo -n '{"port":"'${port}'","ps":'${ps}',"tls":"tls","id":'"${id}"',"aid":"1","v":"2","host":"'${host}'","type":"none","path":"/'${path}'","net":"ws","add":"'${add}'","allowInsecure":0,"method":"none","peer":"'${host}'"}' | sed 's#/#\\\/#g' | base64) + qrCodeBase64Default=$(echo ${qrCodeBase64Default} | sed 's/ //g') + echoContent yellow " ---> 通用json(VMess+WS+TLS)" + echoContent green ' {"port":"'${port}'","ps":'${ps}',"tls":"tls","id":'"${id}"',"aid":"1","v":"2","host":"'${host}'","type":"none","path":"/'${path}'","net":"ws","add":"'${add}'","allowInsecure":0,"method":"none","peer":"'${host}'"}\n' + echoContent yellow " ---> 通用vmess(VMess+WS+TLS)链接" + echoContent green " vmess://${qrCodeBase64Default}\n" + echoContent yellow " ---> 二维码 vmess(VMess+WS+TLS)" + echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vmess://${qrCodeBase64Default}\n" - elif [[ "${type}" = "vlessws" ]] - then - local VLESSID=`echo ${id}|awk -F "[\"]" '{print $2}'` - local VLESSEmail=`echo ${ps}|awk -F "[\"]" '{print $2}'` - echoContent yellow " ---> 通用格式(VLESS+WS+TLS)" - echoContent green " vless://${VLESSID}@${add}:${port}?encryption=none&security=tls&type=ws&host=${host}&path=%2f${path}#${VLESSEmail}\n" + elif [[ "${type}" == "vmesstcp" ]]; then + qrCodeBase64Default=$(echo -n '{"port":"'${port}'","ps":'${ps}',"tls":"tls","id":'"${id}"',"aid":"1","v":"2","host":"'${host}'","type":"http","path":"/'${path}'","net":"tcp","add":"'${add}'","allowInsecure":0,"method":"none","peer":"'${host}'","obfs":"http","obfsParam":"'${host}'"}' | sed 's#/#\\\/#g' | base64) + qrCodeBase64Default=$(echo "${qrCodeBase64Default}" | sed 's/ //g') + echoContent yellow " ---> 通用json(VMess+TCP+TLS)" + echoContent green ' {"port":"'${port}'","ps":'${ps}',"tls":"tls","id":'"${id}"',"aid":"1","v":"2","host":"'${host}'","type":"http","path":"/'${path}'","net":"tcp","add":"'${add}'","allowInsecure":0,"method":"none","peer":"'${host}'","obfs":"http","obfsParam":"'${host}'"}\n' + echoContent yellow " ---> 通用vmess(VMess+TCP+TLS)链接" + echoContent green " vmess://${qrCodeBase64Default}\n" + echoContent yellow " ---> 二维码 vmess(VMess+TCP+TLS)" + echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vmess://${qrCodeBase64Default}\n" - echoContent yellow " ---> 二维码 VLESS(VLESS+TCP+TLS/XTLS)" - echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3A%2F%2F${VLESSID}%40${add}%3A${port}%3Fencryption%3Dnone%26security%3Dtls%26type%3Dws%26host%3D${host}%26path%3D%252f${path}%23${VLESSEmail}" + elif [[ "${type}" == "vlessws" ]]; then + local VLESSID + VLESSID=$(echo "${id}" | awk -F "[\"]" '{print $2}') + local VLESSEmail + VLESSEmail=$(echo "${ps}" | awk -F "[\"]" '{print $2}') - elif [[ "${type}" = "trojan" ]] - then - # URLEncode - echoContent yellow " ---> Trojan(TLS)" - echoContent green " trojan://${id}@${host}:${port}?peer=${host}&sni=${host}\n" - echoContent yellow " ---> 二维码 Trojan(TLS)" - echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=trojan%3a%2f%2f${id}%40${host}%3a${port}%3fpeer%3d${host}%26sni%3d${host}%23${host}_trojan\n" + echoContent yellow " ---> 通用格式(VLESS+WS+TLS)" + echoContent green " vless://${VLESSID}@${add}:${port}?encryption=none&security=tls&type=ws&host=${host}&path=%2f${path}#${VLESSEmail}\n" - elif [[ "${type}" = "trojangows" ]] - then - # URLEncode - echoContent yellow " ---> Trojan-Go(WS+TLS) Shadowrocket" - echoContent green " trojan://${id}@${add}:${port}?allowInsecure=0&&peer=${host}&sni=${host}&plugin=obfs-local;obfs=websocket;obfs-host=${host};obfs-uri=${path}#${host}_trojan_ws\n" - echoContent yellow " ---> 二维码 Trojan-Go(WS+TLS) Shadowrocket" - echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=trojan%3a%2f%2f${id}%40${add}%3a${port}%3fallowInsecure%3d0%26peer%3d${host}%26plugin%3dobfs-local%3bobfs%3dwebsocket%3bobfs-host%3d${host}%3bobfs-uri%3d${path}%23${host}_trojan_ws\n" + echoContent yellow " ---> 二维码 VLESS(VLESS+TCP+TLS/XTLS)" + echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3A%2F%2F${VLESSID}%40${add}%3A${port}%3Fencryption%3Dnone%26security%3Dtls%26type%3Dws%26host%3D${host}%26path%3D%252f${path}%23${VLESSEmail}" - path=`echo ${path}|awk -F "[/]" '{print $2}'` - echoContent yellow " ---> Trojan-Go(WS+TLS) QV2ray" - echoContent green " trojan-go://${id}@${add}:${port}?sni=${host}&type=ws&host=${host}&path=%2F${path}#${host}_trojan_ws\n" - fi + elif [[ "${type}" == "trojan" ]]; then + # URLEncode + echoContent yellow " ---> Trojan(TLS)" + echoContent green " trojan://${id}@${host}:${port}?peer=${host}&sni=${host}\n" + echoContent yellow " ---> 二维码 Trojan(TLS)" + echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=trojan%3a%2f%2f${id}%40${host}%3a${port}%3fpeer%3d${host}%26sni%3d${host}%23${host}_trojan\n" + + elif [[ "${type}" == "trojangows" ]]; then + # URLEncode + echoContent yellow " ---> Trojan-Go(WS+TLS) Shadowrocket" + echoContent green " trojan://${id}@${add}:${port}?allowInsecure=0&&peer=${host}&sni=${host}&plugin=obfs-local;obfs=websocket;obfs-host=${host};obfs-uri=${path}#${host}_trojan_ws\n" + echoContent yellow " ---> 二维码 Trojan-Go(WS+TLS) Shadowrocket" + echoContent green "https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=trojan%3a%2f%2f${id}%40${add}%3a${port}%3fallowInsecure%3d0%26peer%3d${host}%26plugin%3dobfs-local%3bobfs%3dwebsocket%3bobfs-host%3d${host}%3bobfs-uri%3d${path}%23${host}_trojan_ws\n" + + path=$(echo "${path}" | awk -F "[/]" '{print $2}') + echoContent yellow " ---> Trojan-Go(WS+TLS) QV2ray" + echoContent green " trojan-go://${id}@${add}:${port}?sni=${host}&type=ws&host=${host}&path=%2F${path}#${host}_trojan_ws\n" + fi } # 账号 -showAccounts(){ - readInstallType - readConfigHostPathUUID - readInstallProtocolType - echoContent skyBlue "\n进度 $1/${totalProgress} : 账号" +showAccounts() { + readInstallType + readConfigHostPathUUID + readInstallProtocolType + echoContent skyBlue "\n进度 $1/${totalProgress} : 账号" - # VLESS TCP - if [[ ! -z "${configPath}" ]] && [[ ! -z `echo ${currentInstallProtocolType} | grep 0` || -z "${currentInstallProtocolType}" ]] - then - echoContent skyBlue "\n===================== VLESS TCP TLS/XTLS-direct/XTLS-splice ======================\n" + # VLESS TCP + if [[ -n "${configPath}" ]] && echo "${currentInstallProtocolType}" | grep -q 0 || [[ -z "${currentInstallProtocolType}" ]]; then + echoContent skyBlue "\n===================== VLESS TCP TLS/XTLS-direct/XTLS-splice ======================\n" - cat ${configPath}02_VLESS_TCP_inbounds.json|jq .inbounds[0].settings.clients|jq -c '.[]'|while read user - do - defaultBase64Code vlesstcp `echo ${user}|jq .email` `echo ${user}|jq .id` "${currentHost}:${currentPort}" ${currentHost} - done - fi + # cat ${configPath}02_VLESS_TCP_inbounds.json | jq .inbounds[0].settings.clients | jq -c '.[]' + jq .inbounds[0].settings.clients[] ${configPath}02_VLESS_TCP_inbounds.json | while read -r user; do + defaultBase64Code vlesstcp $(echo "${user}" | jq .email) $(echo "${user}" | jq .id) "${currentHost}:${currentPort}" ${currentHost} + done + fi - # VLESS WS - if [[ ! -z "${configPath}" ]] && [[ ! -z `echo ${currentInstallProtocolType} | grep 1` || -z "${currentInstallProtocolType}" ]] - then - echoContent skyBlue "\n================================ VLESS WS TLS CDN ================================\n" + # VLESS WS + if [[ -n "${configPath}" ]] && echo ${currentInstallProtocolType} | grep -q 1 || [[ -z "${currentInstallProtocolType}" ]]; then + echoContent skyBlue "\n================================ VLESS WS TLS CDN ================================\n" - cat ${configPath}03_VLESS_WS_inbounds.json|jq .inbounds[0].settings.clients|jq -c '.[]'|while read user - do - defaultBase64Code vlessws `echo ${user}|jq .email` `echo ${user}|jq .id` "${currentHost}:${currentPort}" "${currentPath}ws" ${currentAdd} - done - fi + # cat ${configPath}03_VLESS_WS_inbounds.json | jq .inbounds[0].settings.clients | jq -c '.[]' + jq .inbounds[0].settings.clients[] ${configPath}03_VLESS_WS_inbounds.json | while read -r user; do + defaultBase64Code vlessws $(echo "${user}" | jq .email) $(echo "${user}" | jq .id) "${currentHost}:${currentPort}" "${currentPath}ws" ${currentAdd} + done + fi - # VMess TCP - if [[ ! -z "${configPath}" ]] && [[ ! -z `echo ${currentInstallProtocolType}|grep 2` || -z "${currentInstallProtocolType}" ]] - then - echoContent skyBlue "\n================================= VMess TCP TLS =================================\n" + # VMess TCP + if [[ -n "${configPath}" ]] && echo ${currentInstallProtocolType} | grep -q 2 || [[ -z "${currentInstallProtocolType}" ]]; then + echoContent skyBlue "\n================================= VMess TCP TLS =================================\n" - cat ${configPath}04_VMess_TCP_inbounds.json|jq .inbounds[0].settings.clients|jq -c '.[]'|while read user - do - defaultBase64Code vmesstcp `echo ${user}|jq .email` `echo ${user}|jq .id` "${currentHost}:${currentPort}" "${currentPath}tcp" "${currentHost}" - done - fi - # VMess WS - if [[ ! -z "${configPath}" ]] && [[ ! -z `echo ${currentInstallProtocolType} | grep 3` || -z "${currentInstallProtocolType}" ]] - then - echoContent skyBlue "\n================================ VMess WS TLS CDN ================================\n" + # cat ${configPath}04_VMess_TCP_inbounds.json | jq .inbounds[0].settings.clients | jq -c '.[]' + jq .inbounds[0].settings.clients[] | while read -r user; do + defaultBase64Code vmesstcp $(echo "${user}" | jq .email) $(echo "${user}" | jq .id) "${currentHost}:${currentPort}" "${currentPath}tcp" "${currentHost}" + done + fi - cat ${configPath}05_VMess_WS_inbounds.json|jq .inbounds[0].settings.clients|jq -c '.[]'|while read user - do - defaultBase64Code vmessws `echo ${user}|jq .email` `echo ${user}|jq .id` "${currentHost}:${currentPort}" "${currentPath}vws" ${currentAdd} - done - fi + # VMess WS + if [[ -n "${configPath}" ]] && echo ${currentInstallProtocolType} | grep -q 3 || [[ -z "${currentInstallProtocolType}" ]]; then + echoContent skyBlue "\n================================ VMess WS TLS CDN ================================\n" - # trojan-go - if [[ -d "/etc/v2ray-agent/" ]] && [[ -d "/etc/v2ray-agent/trojan/" ]] && [[ -f "/etc/v2ray-agent/trojan/config_full.json" ]] - then - showStatus=true -# local trojanUUID=`cat /etc/v2ray-agent/trojan/config_full.json |jq .password[0]|awk -F '["]' '{print $2}'` - local trojanGoPath=`cat /etc/v2ray-agent/trojan/config_full.json|jq .websocket.path|awk -F '["]' '{print $2}'` - local trojanGoAdd=`cat /etc/v2ray-agent/trojan/config_full.json|jq .websocket.add|awk -F '["]' '{print $2}'` - echoContent skyBlue "\n================================== Trojan TLS ==================================\n" - cat /etc/v2ray-agent/trojan/config_full.json |jq .password|while read user - do - trojanUUID=`echo ${user}|awk -F '["]' '{print $2}'` - if [[ ! -z "${trojanUUID}" ]] - then - defaultBase64Code trojan trojan ${trojanUUID} ${currentHost} - fi - done + # cat ${configPath}05_VMess_WS_inbounds.json | jq .inbounds[0].settings.clients | jq -c '.[]' + jq .inbounds[0].settings.clients[] ${configPath}05_VMess_WS_inbounds.json | while read -r user; do + defaultBase64Code vmessws $(echo "${user}" | jq .email) $(echo "${user}" | jq .id) "${currentHost}:${currentPort}" "${currentPath}vws" ${currentAdd} + done + fi + # trojan-go + if [[ -d "/etc/v2ray-agent/" ]] && [[ -d "/etc/v2ray-agent/trojan/" ]] && [[ -f "/etc/v2ray-agent/trojan/config_full.json" ]]; then + showStatus=true + # local trojanUUID=`cat /etc/v2ray-agent/trojan/config_full.json |jq .password[0]|awk -F '["]' '{print $2}'` + local trojanGoPath=$(jq .websocket.path /etc/v2ray-agent/trojan/config_full.json | awk -F '["]' '{print $2}') + local trojanGoAdd=$(jq .websocket.add /etc/v2ray-agent/trojan/config_full.json | awk -F '["]' '{print $2}') + echoContent skyBlue "\n================================== Trojan TLS ==================================\n" + # cat /etc/v2ray-agent/trojan/config_full.json | jq .password + jq .password /etc/v2ray-agent/trojan/config_full.json | while read -r user; do + trojanUUID=$(echo "${user}" | awk -F '["]' '{print $2}') + if [[ -n "${trojanUUID}" ]]; then + defaultBase64Code trojan trojan ${trojanUUID} ${currentHost} + fi + done - echoContent skyBlue "\n================================ Trojan WS TLS ================================\n" - if [[ -z ${trojanGoAdd} ]] - then - trojanGoAdd=${currentHost} - fi + echoContent skyBlue "\n================================ Trojan WS TLS ================================\n" + if [[ -z ${trojanGoAdd} ]]; then + trojanGoAdd=${currentHost} + fi - cat /etc/v2ray-agent/trojan/config_full.json |jq .password|while read user - do - trojanUUID=`echo ${user}|awk -F '["]' '{print $2}'` - if [[ ! -z "${trojanUUID}" ]] - then - defaultBase64Code trojangows trojan ${trojanUUID} ${currentHost} ${trojanGoPath} ${trojanGoAdd} - fi + jq .password /etc/v2ray-agent/trojan/config_full.json | while read -r user; do + trojanUUID=$(echo ${user} | awk -F '["]' '{print $2}') + if [[ -n "${trojanUUID}" ]]; then + defaultBase64Code trojangows trojan ${trojanUUID} ${currentHost} ${trojanGoPath} ${trojanGoAdd} + fi - done - fi + done + fi } # 更新伪装站 -updateNginxBlog(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 更换伪装站点" - echoContent red "==============================================================" - echoContent yellow "# 如需自定义，请手动复制模版文件到 /usr/share/nginx/html \n" - echoContent yellow "1.数据统计模版" - echoContent yellow "2.下雪动画用户注册登录模版" - echoContent yellow "3.物流大数据服务平台模版" - echoContent yellow "4.植物花卉模版" - echoContent red "==============================================================" - read -p "请选择：" selectInstallNginxBlogType +updateNginxBlog() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 更换伪装站点" + echoContent red "==============================================================" + echoContent yellow "# 如需自定义，请手动复制模版文件到 /usr/share/nginx/html \n" + echoContent yellow "1.数据统计模版" + echoContent yellow "2.下雪动画用户注册登录模版" + echoContent yellow "3.物流大数据服务平台模版" + echoContent yellow "4.植物花卉模版" + echoContent red "==============================================================" + read -r -p "请选择：" selectInstallNginxBlogType - if [[ "${selectInstallNginxBlogType}" =~ ^[1-4]$ ]] - then - rm -rf /usr/share/nginx/html - if [[ ! -z `wget --help|grep show-progress` ]] - then - wget -c -q --show-progress -P /usr/share/nginx https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html${selectInstallNginxBlogType}.zip > /dev/null - else - wget -c -P --show-progress -P /usr/share/nginx https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html${selectInstallNginxBlogType}.zip > /dev/null - fi + if [[ "${selectInstallNginxBlogType}" =~ ^[1-4]$ ]]; then + rm -rf /usr/share/nginx/html - unzip -o /usr/share/nginx/html${selectInstallNginxBlogType}.zip -d /usr/share/nginx/html > /dev/null - rm -f /usr/share/nginx/html${selectInstallNginxBlogType}.zip* - echoContent green " ---> 更换伪装博客成功" - else - echoContent red " ---> 选择错误，请重新选择" - updateNginxBlog - fi + if wget --help | grep -q show-progress; then + wget -c -q --show-progress -P /usr/share/nginx https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html${selectInstallNginxBlogType}.zip >/dev/null + else + wget -c -P --show-progress -P /usr/share/nginx https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html${selectInstallNginxBlogType}.zip >/dev/null + fi + + unzip -o "/usr/share/nginx/html${selectInstallNginxBlogType}.zip" -d /usr/share/nginx/html >/dev/null + rm -f "/usr/share/nginx/html${selectInstallNginxBlogType}.zip*" + echoContent green " ---> 更换伪装博客成功" + else + echoContent red " ---> 选择错误，请重新选择" + updateNginxBlog + fi } # 卸载脚本 -unInstall(){ - read -p "是否确认卸载安装内容？[y/n]:" unInstallStatus - if [[ "${unInstallStatus}" != "y" ]] - then - echoContent green " ---> 放弃卸载" - menu - exit; - fi +unInstall() { + read -r -p "是否确认卸载安装内容？[y/n]:" unInstallStatus + if [[ "${unInstallStatus}" != "y" ]]; then + echoContent green " ---> 放弃卸载" + menu + exit + fi - handleNginx stop - if [[ -z `ps -ef|grep -v grep|grep nginx` ]] - then - echoContent green " ---> 停止Nginx成功" - fi + handleNginx stop + if ps -ef | !grep -q nginx; then + echoContent green " ---> 停止Nginx成功" + fi - handleV2Ray stop - handleTrojanGo stop - rm -rf /etc/systemd/system/v2ray.service - echoContent green " ---> 删除V2Ray开机自启完成" - rm -rf /etc/systemd/system/trojan-go.service - echoContent green " ---> 删除Trojan-Go开机自启完成" - rm -rf /tmp/v2ray-agent-tls/* - if [[ -d "/etc/v2ray-agent/tls" ]] && [[ ! -z `find /etc/v2ray-agent/tls/ -name "*.key"` ]] && [[ ! -z `find /etc/v2ray-agent/tls/ -name "*.crt"` ]] - then - mv /etc/v2ray-agent/tls /tmp/v2ray-agent-tls - if [[ ! -z `find /tmp/v2ray-agent-tls -name '*.key'` ]] - then - echoContent yellow " ---> 备份证书成功，请注意留存。[/tmp/v2ray-agent-tls]" - fi - fi + handleV2Ray stop + handleTrojanGo stop + rm -rf /etc/systemd/system/v2ray.service + echoContent green " ---> 删除V2Ray开机自启完成" + rm -rf /etc/systemd/system/trojan-go.service + echoContent green " ---> 删除Trojan-Go开机自启完成" + rm -rf /tmp/v2ray-agent-tls/* + if [[ -d "/etc/v2ray-agent/tls" ]] && [[ -n $(find /etc/v2ray-agent/tls/ -name "*.key") ]] && [[ -n $(find /etc/v2ray-agent/tls/ -name "*.crt") ]]; then + mv /etc/v2ray-agent/tls /tmp/v2ray-agent-tls + if [[ -n $(find /tmp/v2ray-agent-tls -name '*.key') ]]; then + echoContent yellow " ---> 备份证书成功，请注意留存。[/tmp/v2ray-agent-tls]" + fi + fi - rm -rf /etc/v2ray-agent - rm -rf /etc/nginx/conf.d/alone.conf - rm -rf /usr/bin/vasma - rm -rf /usr/sbin/vasma - echoContent green " ---> 卸载快捷方式完成" - echoContent green " ---> 卸载v2ray-agent完成" + rm -rf /etc/v2ray-agent + rm -rf /etc/nginx/conf.d/alone.conf + rm -rf /usr/bin/vasma + rm -rf /usr/sbin/vasma + echoContent green " ---> 卸载快捷方式完成" + echoContent green " ---> 卸载v2ray-agent完成" } # 修改V2Ray CDN节点 -updateV2RayCDN(){ +updateV2RayCDN() { - # todo 重构此方法 - echoContent skyBlue "\n进度 $1/${totalProgress} : 修改CDN节点" + # todo 重构此方法 + echoContent skyBlue "\n进度 $1/${totalProgress} : 修改CDN节点" - if [[ ! -z ${currentAdd} ]] - then - echoContent red "==============================================================" - echoContent yellow "1.CNAME www.digitalocean.com" - echoContent yellow "2.CNAME amp.cloudflare.com" - echoContent yellow "3.CNAME domain08.qiu4.ml" - echoContent yellow "4.手动输入" - echoContent red "==============================================================" - read -p "请选择:" selectCDNType - case ${selectCDNType} in - 1) - setDomain="www.digitalocean.com" - ;; - 2) - setDomain="amp.cloudflare.com" - ;; - 3) - setDomain="domain08.qiu4.ml" - ;; - 4) - read -p "请输入想要自定义CDN IP或者域名:" setDomain - ;; - esac + if [[ -n ${currentAdd} ]]; then + echoContent red "==============================================================" + echoContent yellow "1.CNAME www.digitalocean.com" + echoContent yellow "2.CNAME amp.cloudflare.com" + echoContent yellow "3.CNAME domain08.qiu4.ml" + echoContent yellow "4.手动输入" + echoContent red "==============================================================" + read -r -p "请选择:" selectCDNType + case ${selectCDNType} in + 1) + setDomain="www.digitalocean.com" + ;; + 2) + setDomain="amp.cloudflare.com" + ;; + 3) + setDomain="domain08.qiu4.ml" + ;; + 4) + read -r -p "请输入想要自定义CDN IP或者域名:" setDomain + ;; + esac - if [[ ! -z ${setDomain} ]] - then - if [[ ! -z ${currentAdd} ]] - then - sed -i "s/\"${currentAdd}\"/\"${setDomain}\"/g" `grep "${currentAdd}" -rl ${configPath}02_VLESS_TCP_inbounds.json` - fi + if [[ -n ${setDomain} ]]; then + if [[ -n ${currentAdd} ]]; then + sed -i "s/\"${currentAdd}\"/\"${setDomain}\"/g" $(grep "${currentAdd}" -rl ${configPath}02_VLESS_TCP_inbounds.json) + fi + # if [[ $(grep <./02_VLESS_TCP_inbounds.json add | awk -F '["]' '{print $4}') == "${setDomain}" ]] + if [[ $(grep <${configPath}02_VLESS_TCP_inbounds.json add | awk -F '["]' '{print $4}') == "${setDomain}" ]]; then + echoContent green " ---> CDN修改成功" + if [[ "${coreInstallType}" == "1" ]]; then + handleXray stop + handleXray start + elif [[ "${coreInstallType}" == "2" || "${coreInstallType}" == "3" ]]; then + handleV2Ray stop + handleV2Ray start + fi - if [[ `cat ${configPath}02_VLESS_TCP_inbounds.json|grep -v grep|grep add|awk -F '["]' '{print $4}'` = ${setDomain} ]] - then - echoContent green " ---> CDN修改成功" - if [[ "${coreInstallType}" = "1" ]] - then - handleXray stop - handleXray start - elif [[ "${coreInstallType}" = "2" || "${coreInstallType}" = "3" ]] - then - handleV2Ray stop - handleV2Ray start - fi + else + echoContent red " ---> 修改CDN失败" + fi - else - echoContent red " ---> 修改CDN失败" - fi + # trojan + if [[ -d "/etc/v2ray-agent/trojan" ]] && [[ -f "/etc/v2ray-agent/trojan/config_full.json" ]]; then + add=$(jq .websocket.add /etc/v2ray-agent/trojan/config_full.json | awk -F '["]' '{print $2}') + if [[ -n ${add} ]]; then + sed -i "s/${add}/${setDomain}/g" $(grep "${add}" -rl /etc/v2ray-agent/trojan/config_full.json) + fi + fi - # trojan - if [[ -d "/etc/v2ray-agent/trojan" ]] && [[ -f "/etc/v2ray-agent/trojan/config_full.json" ]] - then - add=`cat /etc/v2ray-agent/trojan/config_full.json|jq .websocket.add|awk -F '["]' '{print $2}'` - if [[ ! -z ${add} ]] - then - sed -i "s/${add}/${setDomain}/g" `grep "${add}" -rl /etc/v2ray-agent/trojan/config_full.json` - fi - fi - - if [[ -d "/etc/v2ray-agent/trojan" ]] && [[ -f "/etc/v2ray-agent/trojan/config_full.json" ]] && [[ `cat /etc/v2ray-agent/trojan/config_full.json|jq .websocket.add|awk -F '["]' '{print $2}'` = ${setDomain} ]] - then - echoContent green "\n ---> Trojan CDN修改成功" - handleTrojanGo stop - handleTrojanGo start - elif [[ -d "/etc/v2ray-agent/trojan" ]] && [[ -f "/etc/v2ray-agent/trojan/config_full.json" ]] - then - echoContent red " ---> 修改Trojan CDN失败" - fi - fi - else - echoContent red " ---> 未安装可用类型" - fi - menu + if [[ -d "/etc/v2ray-agent/trojan" ]] && [[ -f "/etc/v2ray-agent/trojan/config_full.json" ]] && [[ $(jq .websocket.add /etc/v2ray-agent/trojan/config_full.json | awk -F '["]' '{print $2}') == ${setDomain} ]]; then + echoContent green "\n ---> Trojan CDN修改成功" + handleTrojanGo stop + handleTrojanGo start + elif [[ -d "/etc/v2ray-agent/trojan" ]] && [[ -f "/etc/v2ray-agent/trojan/config_full.json" ]]; then + echoContent red " ---> 修改Trojan CDN失败" + fi + fi + else + echoContent red " ---> 未安装可用类型" + fi + menu } # manageUser 用户管理 -manageUser(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 多用户管理" - echoContent skyBlue "-----------------------------------------------------" - echoContent yellow "1.添加用户" - echoContent yellow "2.删除用户" - echoContent skyBlue "-----------------------------------------------------" - read -p "请选择：" manageUserType - if [[ "${manageUserType}" = "1" ]] - then - addUser - elif [[ "${manageUserType}" = "2" ]] - then - removeUser - else - echoContent red " ---> 选择错误" - fi +manageUser() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 多用户管理" + echoContent skyBlue "-----------------------------------------------------" + echoContent yellow "1.添加用户" + echoContent yellow "2.删除用户" + echoContent skyBlue "-----------------------------------------------------" + read -r -p "请选择：" manageUserType + if [[ "${manageUserType}" == "1" ]]; then + addUser + elif [[ "${manageUserType}" == "2" ]]; then + removeUser + else + echoContent red " ---> 选择错误" + fi } # 自定义uuid -customUUID(){ - read -p "是否自定义UUID ？[y/n]:" customUUIDStatus - echo - if [[ "${customUUIDStatus}" = "y" ]] - then - read -p "请输入合法的UUID:" currentCustomUUID - echo - if [[ -z "${currentCustomUUID}" ]] - then - echoContent red " ---> UUID不可为空" - else - local repeat= - cat ${configPath}02_VLESS_TCP_inbounds.json|jq '.inbounds[0].settings.clients[].id'|awk -F "[\"]" '{print $2}'|while read line - do - if [[ "${line}" = "${currentCustomUUID}" ]] - then - echo repeat >/tmp/v2ray-agent - fi - done - if [[ -f "/tmp/v2ray-agent" && ! -z `cat /tmp/v2ray-agent` ]] - then - echoContent red " ---> UUID不可重复" - rm /tmp/v2ray-agent - exit; - fi - fi - fi +customUUID() { + read -r -p "是否自定义UUID ？[y/n]:" customUUIDStatus + echo + if [[ "${customUUIDStatus}" == "y" ]]; then + read -r -p "请输入合法的UUID:" currentCustomUUID + echo + if [[ -z "${currentCustomUUID}" ]]; then + echoContent red " ---> UUID不可为空" + else + local repeat= + jq '.inbounds[0].settings.clients[].id' ${configPath}02_VLESS_TCP_inbounds.json | awk -F "[\"]" '{print $2}' | while read -r line; do + if [[ "${line}" == "${currentCustomUUID}" ]]; then + echo repeat >/tmp/v2ray-agent + fi + done + if [[ -f "/tmp/v2ray-agent" && -n $(cat /tmp/v2ray-agent) ]]; then + echoContent red " ---> UUID不可重复" + rm /tmp/v2ray-agent + exit + fi + fi + fi } # 自定义email -customUserEmail(){ - read -p "是否自定义email ？[y/n]:" customEmailStatus - echo - if [[ "${customEmailStatus}" = "y" ]] - then - read -p "请输入合法的email:" currentCustomEmail - echo - if [[ -z "${currentCustomEmail}" ]] - then - echoContent red " ---> email不可为空" - else - local repeat= - cat ${configPath}02_VLESS_TCP_inbounds.json|jq '.inbounds[0].settings.clients[].email'|awk -F "[\"]" '{print $2}'|while read line - do - if [[ "${line}" = "${currentCustomEmail}" ]] - then - echo repeat >/tmp/v2ray-agent - fi - done - if [[ -f "/tmp/v2ray-agent" && ! -z `cat /tmp/v2ray-agent` ]] - then - echoContent red " ---> email不可重复" - rm /tmp/v2ray-agent - exit; - fi - fi - fi +customUserEmail() { + read -r -p "是否自定义email ？[y/n]:" customEmailStatus + echo + if [[ "${customEmailStatus}" == "y" ]]; then + read -r -p "请输入合法的email:" currentCustomEmail + echo + if [[ -z "${currentCustomEmail}" ]]; then + echoContent red " ---> email不可为空" + else + local repeat= + jq '.inbounds[0].settings.clients[].email' ${configPath}02_VLESS_TCP_inbounds.json | awk -F "[\"]" '{print $2}' | while read -r line; do + if [[ "${line}" == "${currentCustomEmail}" ]]; then + echo repeat >/tmp/v2ray-agent + fi + done + if [[ -f "/tmp/v2ray-agent" && -n $(cat /tmp/v2ray-agent) ]]; then + echoContent red " ---> email不可重复" + rm /tmp/v2ray-agent + exit + fi + fi + fi } # 添加用户 -addUser(){ - read -p "请输入要添加的用户数量：" userNum - echo - if [[ -z ${userNum} || ${userNum} -le 0 ]] - then - echoContent red " ---> 输入有误，请重新输入" - exit - fi +addUser() { + read -r -p "请输入要添加的用户数量：" userNum + echo + if [[ -z ${userNum} || ${userNum} -le 0 ]]; then + echoContent red " ---> 输入有误，请重新输入" + exit + fi - # 生成用户 - local users= - local trojanGoUsers= - if [[ "${userNum}" = "1" ]] - then - customUUID - customUserEmail - fi + # 生成用户 + local users= + local trojanGoUsers= + if [[ "${userNum}" == "1" ]]; then + customUUID + customUserEmail + fi - while [[ ${userNum} -gt 0 ]] - do - let userNum-- - if [[ ! -z "${currentCustomUUID}" ]] - then - uuid=${currentCustomUUID} - else - uuid=`${ctlPath} uuid` - fi + while [[ ${userNum} -gt 0 ]]; do + ((userNum--)) || true + if [[ -n "${currentCustomUUID}" ]]; then + uuid=${currentCustomUUID} + else + uuid=$(${ctlPath} uuid) + fi - if [[ ! -z "${currentCustomEmail}" ]] - then - email=${currentCustomEmail} - else - email=${currentHost}_${uuid} - fi + if [[ -n "${currentCustomEmail}" ]]; then + email=${currentCustomEmail} + else + email=${currentHost}_${uuid} + fi - if [[ ${userNum} = 0 ]] - then - users=${users}{\"id\":\"${uuid}\",\"flow\":\"xtls-rprx-direct\",\"email\":\"${email}\"} + if [[ ${userNum} == 0 ]]; then + users=${users}{\"id\":\"${uuid}\",\"flow\":\"xtls-rprx-direct\",\"email\":\"${email}\"} - if [[ ! -z `echo ${currentInstallProtocolType}|grep 4` ]] - then - trojanGoUsers=${trojanGoUsers}\"${uuid}\" - fi - else - users=${users}{\"id\":\"${uuid}\",\"flow\":\"xtls-rprx-direct\",\"email\":\"${email}\"}, + if echo ${currentInstallProtocolType} | grep -q 4; then + trojanGoUsers=${trojanGoUsers}\"${uuid}\" + fi + else + users=${users}{\"id\":\"${uuid}\",\"flow\":\"xtls-rprx-direct\",\"email\":\"${email}\"}, - if [[ ! -z `echo ${currentInstallProtocolType}|grep 4` ]] - then - trojanGoUsers=${trojanGoUsers}\"${uuid}\", - fi - fi + if echo ${currentInstallProtocolType} | grep -q 4; then + trojanGoUsers=${trojanGoUsers}\"${uuid}\", + fi + fi - done - # 兼容v2ray-core - if [[ "${coreInstallType}" = "2" ]] - then - users=`echo ${users}|sed 's/"flow":"xtls-rprx-direct",/"alterId":1,/g'` - fi + done + # 兼容v2ray-core + if [[ "${coreInstallType}" == "2" ]]; then + # | sed 's/"flow":"xtls-rprx-direct",/"alterId":1,/g') + users="${users//"flow":"xtls-rprx-direct",/"alterId":1,}" + fi - if [[ ! -z `echo ${currentInstallProtocolType} | grep 0` ]] - then - local vlessUsers=`echo ${users}|sed 's/"alterId":1,//g'` - local vlessTcpResult=`cat ${configPath}02_VLESS_TCP_inbounds.json|jq -r '.inbounds[0].settings.clients += ['${vlessUsers}']'` - echo ${vlessTcpResult} | jq . > ${configPath}02_VLESS_TCP_inbounds.json - fi + if [[ -n $(echo ${currentInstallProtocolType} | grep 0) ]]; then + # | sed 's/"alterId":1,//g') + local vlessUsers="${users/"alterId":1,//}" + local vlessTcpResult=$(jq -r '.inbounds[0].settings.clients += ['${vlessUsers}']' ${configPath}02_VLESS_TCP_inbounds.json) + echo "${vlessTcpResult}" | jq . >${configPath}02_VLESS_TCP_inbounds.json + fi - users=`echo ${users}|sed 's/"flow":"xtls-rprx-direct",/"alterId":1,/g'` + users="${users//"flow":"xtls-rprx-direct",/"alterId":1,}" - if [[ ! -z `echo ${currentInstallProtocolType} | grep 1` ]] - then - local vlessUsers=`echo ${users}|sed 's/"alterId":1,//g'` - local vlessWsResult=`cat ${configPath}03_VLESS_WS_inbounds.json|jq -r '.inbounds[0].settings.clients += ['${vlessUsers}']'` - echo ${vlessWsResult}|jq . > ${configPath}03_VLESS_WS_inbounds.json - fi + if echo ${currentInstallProtocolType} | grep -q 1; then + local vlessUsers="${users//"alterId":1,/}" + local vlessWsResult=$(jq -r '.inbounds[0].settings.clients += ['${vlessUsers}']' ${configPath}03_VLESS_WS_inbounds.json) + echo "${vlessWsResult}" | jq . >${configPath}03_VLESS_WS_inbounds.json + fi - if [[ ! -z `echo ${currentInstallProtocolType}|grep 2` ]] - then - local vmessTcpResult=`cat ${configPath}04_VMess_TCP_inbounds.json|jq -r '.inbounds[0].settings.clients += ['${users}']'` - echo ${vmessTcpResult}|jq . > ${configPath}04_VMess_TCP_inbounds.json - fi + if echo ${currentInstallProtocolType} | grep -q 2; then + local vmessTcpResult=$(jq -r '.inbounds[0].settings.clients += ['${users}']' ${configPath}04_VMess_TCP_inbounds.json) + echo "${vmessTcpResult}" | jq . >${configPath}04_VMess_TCP_inbounds.json + fi - if [[ ! -z `echo ${currentInstallProtocolType} | grep 3` ]] - then - local vmessWsResult=`cat ${configPath}05_VMess_WS_inbounds.json|jq -r '.inbounds[0].settings.clients += ['${users}']'` - echo ${vmessWsResult}|jq . > ${configPath}05_VMess_WS_inbounds.json - fi + if echo ${currentInstallProtocolType} | grep -q 3; then + local vmessWsResult=$(jq -r '.inbounds[0].settings.clients += ['${users}']' ${configPath}05_VMess_WS_inbounds.json) + echo "${vmessWsResult}" | jq . >${configPath}05_VMess_WS_inbounds.json + fi - if [[ ! -z `echo ${currentInstallProtocolType} | grep 4` ]] - then - local trojanResult=`cat ${configPath}../../trojan/config_full.json|jq -r '.password += ['${trojanGoUsers}']'` - echo ${trojanResult}|jq . > ${configPath}../../trojan/config_full.json - handleTrojanGo stop - handleTrojanGo start - fi + if echo ${currentInstallProtocolType} | grep -q 4; then + local trojanResult + trojanResult=$(jq -r '.password += ['${trojanGoUsers}']' ${configPath}../../trojan/config_full.json) + echo "${trojanResult}" | jq . >${configPath}../../trojan/config_full.json + handleTrojanGo stop + handleTrojanGo start + fi - - if [[ "${coreInstallType}" = "1" ]] - then - handleXray stop - handleXray start - elif [[ "${coreInstallType}" = "2" || "${coreInstallType}" = "3" ]] - then - handleV2Ray stop - handleV2Ray start - fi - echoContent green " ---> 添加完成" - showAccounts 1 + if [[ "${coreInstallType}" == "1" ]]; then + handleXray stop + handleXray start + elif [[ "${coreInstallType}" == "2" || "${coreInstallType}" == "3" ]]; then + handleV2Ray stop + handleV2Ray start + fi + echoContent green " ---> 添加完成" + showAccounts 1 } # 移除用户 -removeUser(){ - if [[ ! -z `echo ${currentInstallProtocolType} | grep 0` ]] - then - cat ${configPath}02_VLESS_TCP_inbounds.json|jq .inbounds[0].settings.clients|jq .[].email|awk -F "[\"]" '{print $2}'|awk '{print NR""":"$0}' - read -p "请选择要删除的用户编号[仅支持单个删除]:" delUserIndex - if [[ `cat ${configPath}02_VLESS_TCP_inbounds.json|jq -r '.inbounds[0].settings.clients|length'` -lt ${delUserIndex} ]] - then - echoContent red " ---> 选择错误" - else - delUserIndex=`expr ${delUserIndex} - 1` - local vlessTcpResult=`cat ${configPath}02_VLESS_TCP_inbounds.json|jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])'` - echo ${vlessTcpResult}|jq . > ${configPath}02_VLESS_TCP_inbounds.json - fi - fi - if [[ ! -z "${delUserIndex}" ]] - then - if [[ ! -z `echo ${currentInstallProtocolType} | grep 1` ]] - then - local vlessTcpResult=`cat ${configPath}03_VLESS_WS_inbounds.json|jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])'` - echo ${vlessTcpResult}|jq . > ${configPath}03_VLESS_WS_inbounds.json - fi +removeUser() { - if [[ ! -z `echo ${currentInstallProtocolType}|grep 2` ]] - then - local vlessTcpResult=`cat ${configPath}04_VMess_TCP_inbounds.json|jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])'` - echo ${vlessTcpResult}|jq . > ${configPath}04_VMess_TCP_inbounds.json - fi + if echo ${currentInstallProtocolType} | grep -q 0; then + jq .inbounds[0].settings.clients[].email ${configPath}02_VLESS_TCP_inbounds.json | awk -F "[\"]" '{print $2}' | awk '{print NR""":"$0}' + read -r -p "请选择要删除的用户编号[仅支持单个删除]:" delUserIndex + if [[ $(jq -r '.inbounds[0].settings.clients|length' ${configPath}02_VLESS_TCP_inbounds.json) -lt ${delUserIndex} ]]; then + echoContent red " ---> 选择错误" + else + delUserIndex=$(("${delUserIndex}" - 1)) + local vlessTcpResult + vlessTcpResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}02_VLESS_TCP_inbounds.json) + echo "${vlessTcpResult}" | jq . >${configPath}02_VLESS_TCP_inbounds.json + fi + fi + if [[ -n "${delUserIndex}" ]]; then + if echo ${currentInstallProtocolType} | grep -q 1; then + local vlessWSResult + vlessWSResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}03_VLESS_WS_inbounds.json) + echo "${vlessWSResult}" | jq . >${configPath}03_VLESS_WS_inbounds.json + fi - if [[ ! -z `echo ${currentInstallProtocolType} | grep 3` ]] - then - local vlessTcpResult=`cat ${configPath}05_VMess_WS_inbounds.json|jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])'` - echo ${vlessTcpResult}|jq . > ${configPath}05_VMess_WS_inbounds.json - fi + if echo ${currentInstallProtocolType} | grep -q 2; then + local vmessTCPResult + vmessTCPResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}04_VMess_TCP_inbounds.json) + echo "${vmessTCPResult}" | jq . >${configPath}04_VMess_TCP_inbounds.json + fi - if [[ ! -z `echo ${currentInstallProtocolType} | grep 4` ]] - then - local trojanResult=`cat ${configPath}../../trojan/config_full.json|jq -r 'del(.password['${delUserIndex}'])'` - echo ${trojanResult}|jq . > ${configPath}../../trojan/config_full.json - handleTrojanGo stop - handleTrojanGo start - fi - if [[ "${coreInstallType}" = "1" ]] - then - handleXray stop - handleXray start - elif [[ "${coreInstallType}" = "2" || "${coreInstallType}" = "3" ]] - then - handleV2Ray stop - handleV2Ray start - fi - fi + if echo ${currentInstallProtocolType} | grep -q 3; then + local vmessWSResult + vmessWSResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}05_VMess_WS_inbounds.json) + echo "${vmessWSResult}" | jq . >${configPath}05_VMess_WS_inbounds.json + fi + + if echo ${currentInstallProtocolType} | grep -q 4; then + local trojanResult + trojanResult=$(jq -r 'del(.password['${delUserIndex}'])' ${configPath}../../trojan/config_full.json) + echo "${trojanResult}" | jq . >${configPath}../../trojan/config_full.json + handleTrojanGo stop + handleTrojanGo start + fi + if [[ "${coreInstallType}" == "1" ]]; then + handleXray stop + handleXray start + elif [[ "${coreInstallType}" == "2" || "${coreInstallType}" == "3" ]]; then + handleV2Ray stop + handleV2Ray start + fi + fi } # 更新脚本 -updateV2RayAgent(){ - echoContent skyBlue "\n进度 $1/${totalProgress} : 更新v2ray-agent脚本" - wget -P /etc/v2ray-agent/ -N --no-check-certificate "https://raw.githubusercontent.com/mack-a/v2ray-agent/master/install.sh" && chmod 700 /etc/v2ray-agent/install.sh && /bin/bash /etc/v2ray-agent/install.sh +updateV2RayAgent() { + echoContent skyBlue "\n进度 $1/${totalProgress} : 更新v2ray-agent脚本" + wget -P /etc/v2ray-agent/ -N --no-check-certificate "https://raw.githubusercontent.com/mack-a/v2ray-agent/master/install.sh" && chmod 700 /etc/v2ray-agent/install.sh && /bin/bash /etc/v2ray-agent/install.sh } # 安装BBR -bbrInstall(){ - echoContent red "\n==============================================================" - echoContent green "BBR脚本用的[ylx2016]的成熟作品，地址[https://github.com/ylx2016/Linux-NetSpeed]，请熟知" - echoContent red " 1.安装【推荐原版BBR+FQ】" - echoContent red " 2.回退主目录" - echoContent red "==============================================================" - read -p "请选择：" installBBRStatus - if [[ "${installBBRStatus}" = "1" ]] - then - wget -N --no-check-certificate "https://raw.githubusercontent.com/ylx2016/Linux-NetSpeed/master/tcp.sh" && chmod +x tcp.sh && ./tcp.sh - else - menu - fi +bbrInstall() { + echoContent red "\n==============================================================" + echoContent green "BBR脚本用的[ylx2016]的成熟作品，地址[https://github.com/ylx2016/Linux-NetSpeed]，请熟知" + echoContent red " 1.安装【推荐原版BBR+FQ】" + echoContent red " 2.回退主目录" + echoContent red "==============================================================" + read -r -p "请选择：" installBBRStatus + if [[ "${installBBRStatus}" == "1" ]]; then + wget -N --no-check-certificate "https://raw.githubusercontent.com/ylx2016/Linux-NetSpeed/master/tcp.sh" && chmod +x tcp.sh && ./tcp.sh + else + menu + fi } # 查看、检查日志 -checkLog(){ - echoContent skyBlue "\n功能 $1/${totalProgress} : 查看日志" - echoContent red "\n==============================================================" - local coreType= - if [[ "${coreInstallType}" = "1" ]] - then - coreType=xray/xray +checkLog() { + echoContent skyBlue "\n功能 $1/${totalProgress} : 查看日志" + echoContent red "\n==============================================================" + local coreType= + if [[ "${coreInstallType}" == "1" ]]; then + coreType=xray/xray - elif [[ "${coreInstallType}" = "2" || "${coreInstallType}" = "3" ]] - then - coreType=v2ray/v2ray - else - echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容" - menu - exit 0; - fi + elif [[ "${coreInstallType}" == "2" || "${coreInstallType}" == "3" ]]; then + coreType=v2ray/v2ray + else + echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容" + menu + exit 0 + fi + echoContent skyBlue "-------------------------V2Ray/Xray--------------------------------" + echoContent yellow "1.查看error日志" + echoContent yellow "2.监听error日志" + echoContent yellow "3.清空日志" + echoContent skyBlue "-----------------------Trojan-Go------------------------------" + echoContent yellow "4.查看Trojan-Go日志" + echoContent yellow "5.监听Trojan-GO日志" + echoContent yellow "6.清空Trojan-GO日志" + echoContent skyBlue "-------------------------Nginx--------------------------------" + echoContent yellow "7.查看Nginx日志" + echoContent yellow "8.清空Nginx日志" + echoContent red "==============================================================" - echoContent skyBlue "-------------------------V2Ray/Xray--------------------------------" - echoContent yellow "1.查看error日志" - echoContent yellow "2.监听error日志" - echoContent yellow "3.清空日志" - echoContent skyBlue "-----------------------Trojan-Go------------------------------" - echoContent yellow "4.查看Trojan-Go日志" - echoContent yellow "5.监听Trojan-GO日志" - echoContent yellow "6.清空Trojan-GO日志" - echoContent skyBlue "-------------------------Nginx--------------------------------" - echoContent yellow "7.查看Nginx日志" - echoContent yellow "8.清空Nginx日志" - echoContent red "==============================================================" - - - read -p "请选择：" selectLogType - case ${selectLogType} in - 1) - cat /etc/v2ray-agent/xray/xray_error.log - ;; - 2) - tail -f /etc/v2ray-agent/xray/xray_error.log - ;; - 3) - echo '' > /etc/v2ray-agent/xray/xray_error.log - echoContent green " ---> 清空完毕" - ;; - 4) - cat /etc/v2ray-agent/trojan/trojan.log - ;; - 5) - tail -f /etc/v2ray-agent/trojan/trojan.log - ;; - 6) - echo '' > /etc/v2ray-agent/trojan/trojan.log - echoContent green " ---> 清空完毕" - ;; - 7) - cat /var/log/nginx/access.log - ;; - 8) - echo '' > /var/log/nginx/access.log - ;; - esac - sleep 1 - menu + read -r -p "请选择：" selectLogType + case ${selectLogType} in + 1) + cat /etc/v2ray-agent/xray/xray_error.log + ;; + 2) + tail -f /etc/v2ray-agent/xray/xray_error.log + ;; + 3) + echo '' >/etc/v2ray-agent/xray/xray_error.log + echoContent green " ---> 清空完毕" + ;; + 4) + cat /etc/v2ray-agent/trojan/trojan.log + ;; + 5) + tail -f /etc/v2ray-agent/trojan/trojan.log + ;; + 6) + echo '' >/etc/v2ray-agent/trojan/trojan.log + echoContent green " ---> 清空完毕" + ;; + 7) + cat /var/log/nginx/access.log + ;; + 8) + echo '' >/var/log/nginx/access.log + ;; + esac + sleep 1 + menu } # 脚本快捷方式 -aliasInstall(){ - if [[ -f "/root/install.sh" ]] && [[ -d "/etc/v2ray-agent" ]] && [[ ! -z `cat /root/install.sh|grep "作者：mack-a"` ]] - then - mv /root/install.sh /etc/v2ray-agent/install.sh - if [[ -d "/usr/bin/" ]] && [[ ! -f "/usr/bin/vasma" ]] - then - ln -s /etc/v2ray-agent/install.sh /usr/bin/vasma - chmod 700 /usr/bin/vasma - rm -rf /root/install.sh - elif [[ -d "/usr/sbin" ]] && [[ ! -f "/usr/sbin/vasma" ]] - then - ln -s /etc/v2ray-agent/install.sh /usr/sbin/vasma - chmod 700 /usr/sbin/vasma - rm -rf /root/install.sh - fi - echoContent green "快捷方式创建成功，可执行[vasma]重新打开脚本" - fi +aliasInstall() { + + if [[ -f "$HOME/install.sh" ]] && [[ -d "/etc/v2ray-agent" ]] && "$HOME/install.sh" | grep -q "作者：mack-a"; then + mv "$HOME/install.sh" /etc/v2ray-agent/install.sh + if [[ -d "/usr/bin/" ]] && [[ ! -f "/usr/bin/vasma" ]]; then + ln -s /etc/v2ray-agent/install.sh /usr/bin/vasma + chmod 700 /usr/bin/vasma + rm -rf "$HOME/install.sh" + elif [[ -d "/usr/sbin" ]] && [[ ! -f "/usr/sbin/vasma" ]]; then + ln -s /etc/v2ray-agent/install.sh /usr/sbin/vasma + chmod 700 /usr/sbin/vasma + rm -rf "$HOME/install.sh" + fi + echoContent green "快捷方式创建成功，可执行[vasma]重新打开脚本" + fi } # 检查ipv6、ipv4 -checkIPv6(){ - pingIPv6=`ping6 -c 1 www.google.com|sed '2{s/[^(]*(//;s/).*//;q;}'|tail -n +2` - if [[ -z "${pingIPv6}" ]] - then - echoContent red " ---> 不支持ipv6" - exit; - fi +checkIPv6() { + pingIPv6=$(ping6 -c 1 www.google.com | sed '2{s/[^(]*(//;s/).*//;q;}' | tail -n +2) + if [[ -z "${pingIPv6}" ]]; then + echoContent red " ---> 不支持ipv6" + exit + fi } # ipv6 人机验证 -ipv6HumanVerification(){ - if [[ -z "${configPath}" ]] - then - echoContent red " ---> 未安装，请使用脚本安装" - menu - exit; - fi +ipv6HumanVerification() { + if [[ -z "${configPath}" ]]; then + echoContent red " ---> 未安装，请使用脚本安装" + menu + exit + fi - checkIPv6 - echoContent skyBlue "\n功能 1/${totalProgress} : ipv6人机验证" - echoContent red "\n==============================================================" - echoContent yellow "1.添加" - echoContent yellow "2.卸载" - read -p "请选择:" ipv6Status - if [[ "${ipv6Status}" = "1" ]] - then - cat << EOF > ${configPath}09_routing.json + checkIPv6 + echoContent skyBlue "\n功能 1/${totalProgress} : ipv6人机验证" + echoContent red "\n==============================================================" + echoContent yellow "1.添加" + echoContent yellow "2.卸载" + read -r -p "请选择:" ipv6Status + if [[ "${ipv6Status}" == "1" ]]; then + cat <${configPath}09_routing.json { "routing":{ "domainStrategy": "IPOnDemand", @@ -2918,7 +2631,7 @@ ipv6HumanVerification(){ } EOF - cat << EOF > ${configPath}10_ipv4_outbounds.json + cat <${configPath}10_ipv4_outbounds.json { "outbounds": [ { @@ -2938,11 +2651,10 @@ EOF ] } EOF - echoContent green " ---> 人机验证修改成功" + echoContent green " ---> 人机验证修改成功" - elif [[ "${ipv6Status}" = "2" ]] - then - cat << EOF > ${configPath}09_routing.json + elif [[ "${ipv6Status}" == "2" ]]; then + cat <${configPath}09_routing.json { "routing":{ "domainStrategy": "AsIs", @@ -2959,7 +2671,7 @@ EOF } EOF - cat << EOF > ${configPath}10_ipv4_outbounds.json + cat <${configPath}10_ipv4_outbounds.json { "outbounds": [ { @@ -2972,386 +2684,366 @@ EOF ] } EOF - echoContent green " ---> 人机验证卸载成功" - else - echoContent red " ---> 选择错误" - ipv6HumanVerification - exit - fi + echoContent green " ---> 人机验证卸载成功" + else + echoContent red " ---> 选择错误" + ipv6HumanVerification + exit + fi - if [[ "${coreInstallType}" = "1" ]] - then - handleXray stop - handleXray start + if [[ "${coreInstallType}" == "1" ]]; then + handleXray stop + handleXray start - elif [[ "${coreInstallType}" = "2" || "${coreInstallType}" = "3" ]] - then - handleV2Ray stop - handleV2Ray start - fi + elif [[ "${coreInstallType}" == "2" || "${coreInstallType}" == "3" ]]; then + handleV2Ray stop + handleV2Ray start + fi } # v2ray-core个性化安装 -customV2RayInstall(){ - echoContent skyBlue "\n========================个性化安装============================" - echoContent yellow "VLESS前置，必须安装0，如果只需要安装0，回车即可" - if [[ "${selectCoreType}" = "2" ]] - then - echoContent yellow "0.VLESS+TLS+TCP" - else - echoContent yellow "0.VLESS+TLS/XTLS+TCP" - fi +customV2RayInstall() { + echoContent skyBlue "\n========================个性化安装============================" + echoContent yellow "VLESS前置，必须安装0，如果只需要安装0，回车即可" + if [[ "${selectCoreType}" == "2" ]]; then + echoContent yellow "0.VLESS+TLS+TCP" + else + echoContent yellow "0.VLESS+TLS/XTLS+TCP" + fi - echoContent yellow "1.VLESS+TLS+WS[CDN]" - echoContent yellow "2.VMess+TLS+TCP" - echoContent yellow "3.VMess+TLS+WS[CDN]" - echoContent yellow "4.Trojan、Trojan+WS[CDN]" - read -p "请选择[多选]，[例如:123]:" selectCustomInstallType - echoContent skyBlue "--------------------------------------------------------------" - if [[ -z ${selectCustomInstallType} ]] - then - selectCustomInstallType=0 - fi + echoContent yellow "1.VLESS+TLS+WS[CDN]" + echoContent yellow "2.VMess+TLS+TCP" + echoContent yellow "3.VMess+TLS+WS[CDN]" + echoContent yellow "4.Trojan、Trojan+WS[CDN]" + read -r -p "请选择[多选]，[例如:123]:" selectCustomInstallType + echoContent skyBlue "--------------------------------------------------------------" + if [[ -z ${selectCustomInstallType} ]]; then + selectCustomInstallType=0 + fi + echoContent red selectCustomInstallType:${selectCustomInstallType} + if [[ "${selectCustomInstallType}" =~ ^[0-4]+$ ]]; then + cleanUp xrayClean + totalProgress=17 + installTools 1 + # 申请tls + initTLSNginxConfig 2 + installTLS 3 + handleNginx stop + initNginxConfig 4 + # 随机path + if ${selectCustomInstallType} | grep -q 1 || echo ${selectCustomInstallType} | grep -q 3 || echo ${selectCustomInstallType} | grep -q 4; then + randomPathFunction 5 + customCDNIP 6 + fi + nginxBlog 7 + updateRedirectNginxConf + handleNginx start - if [[ "${selectCustomInstallType}" =~ ^[0-4]+$ ]] - then - cleanUp xrayClean - totalProgress=17 - installTools 1 - # 申请tls - initTLSNginxConfig 2 - installTLS 3 - handleNginx stop - initNginxConfig 4 - # 随机path - if [[ ! -z `echo ${selectCustomInstallType}|grep 1` ]] || [[ ! -z `echo ${selectCustomInstallType}|grep 3` ]] || [[ ! -z `echo ${selectCustomInstallType}|grep 4` ]] - then - randomPathFunction 5 - customCDNIP 6 - fi - nginxBlog 7 - updateRedirectNginxConf - handleNginx start - - # 安装V2Ray - installV2Ray 8 - installV2RayService 9 - initV2RayConfig custom 10 - cleanUp xrayDel - if [[ ! -z `echo ${selectCustomInstallType}|grep 4` ]] - then - installTrojanGo 11 - installTrojanService 12 - initTrojanGoConfig 13 - handleTrojanGo stop - handleTrojanGo start - else - # 这里需要删除trojan的服务 - handleTrojanGo stop - rm -rf /etc/v2ray-agent/trojan/* - rm -rf /etc/systemd/system/trojan-go.service - fi - installCronTLS 14 - handleV2Ray stop - handleV2Ray start - # 生成账号 - checkGFWStatue 15 - showAccounts 16 - else - echoContent red " ---> 输入不合法" - customV2RayInstall - fi + # 安装V2Ray + installV2Ray 8 + installV2RayService 9 + initV2RayConfig custom 10 + cleanUp xrayDel + if echo ${selectCustomInstallType} | grep -q 4; then + installTrojanGo 11 + installTrojanService 12 + initTrojanGoConfig 13 + handleTrojanGo stop + handleTrojanGo start + else + # 这里需要删除trojan的服务 + handleTrojanGo stop + rm -rf /etc/v2ray-agent/trojan/* + rm -rf /etc/systemd/system/trojan-go.service + fi + installCronTLS 14 + handleV2Ray stop + handleV2Ray start + # 生成账号 + checkGFWStatue 15 + showAccounts 16 + else + echoContent red " ---> 输入不合法" + customV2RayInstall + fi } # Xray-core个性化安装 -customXrayInstall(){ - echoContent skyBlue "\n========================个性化安装============================" - echoContent yellow "VLESS前置，默认安装0，如果只需要安装0，则只选择0即可" - echoContent yellow "0.VLESS+TLS/XTLS+TCP" - echoContent yellow "1.VLESS+TLS+WS[CDN]" - echoContent yellow "2.VMess+TLS+TCP" - echoContent yellow "3.VMess+TLS+WS[CDN]" - echoContent yellow "4.Trojan、Trojan+WS[CDN]" - read -p "请选择[多选]，[例如:123]:" selectCustomInstallType - echoContent skyBlue "--------------------------------------------------------------" - if [[ -z ${selectCustomInstallType} ]] - then - echoContent red " ---> 不可为空" - customXrayInstall - elif [[ "${selectCustomInstallType}" =~ ^[0-4]+$ ]] - then - cleanUp v2rayClean - totalProgress=17 - installTools 1 - # 申请tls - initTLSNginxConfig 2 - installTLS 3 - handleNginx stop - initNginxConfig 4 - # 随机path - if [[ ! -z `echo ${selectCustomInstallType}|grep 1` ]] || [[ ! -z `echo ${selectCustomInstallType}|grep 3` ]] || [[ ! -z `echo ${selectCustomInstallType}|grep 4` ]] - then - randomPathFunction 5 - customCDNIP 6 - fi - nginxBlog 7 - updateRedirectNginxConf - handleNginx start +customXrayInstall() { + echoContent skyBlue "\n========================个性化安装============================" + echoContent yellow "VLESS前置，默认安装0，如果只需要安装0，则只选择0即可" + echoContent yellow "0.VLESS+TLS/XTLS+TCP" + echoContent yellow "1.VLESS+TLS+WS[CDN]" + echoContent yellow "2.VMess+TLS+TCP" + echoContent yellow "3.VMess+TLS+WS[CDN]" + echoContent yellow "4.Trojan、Trojan+WS[CDN]" + read -r -p "请选择[多选]，[例如:123]:" selectCustomInstallType + echoContent skyBlue "--------------------------------------------------------------" + if [[ -z ${selectCustomInstallType} ]]; then + echoContent red " ---> 不可为空" + customXrayInstall + elif [[ "${selectCustomInstallType}" =~ ^[0-4]+$ ]]; then + cleanUp v2rayClean + totalProgress=17 + installTools 1 + # 申请tls + initTLSNginxConfig 2 + installTLS 3 + handleNginx stop + initNginxConfig 4 + # 随机path + if echo ${selectCustomInstallType} | grep -q 1 || echo ${selectCustomInstallType} | grep -q 3 || echo ${selectCustomInstallType} | grep -q 4; then + randomPathFunction 5 + customCDNIP 6 + fi + nginxBlog 7 + updateRedirectNginxConf + handleNginx start - # 安装V2Ray - installXray 8 - installXrayService 9 - initXrayConfig custom 10 - cleanUp v2rayDel - if [[ ! -z `echo ${selectCustomInstallType}|grep 4` ]] - then - installTrojanGo 11 - installTrojanService 12 - initTrojanGoConfig 13 - handleTrojanGo stop - handleTrojanGo start - else - # 这里需要删除trojan的服务 - handleTrojanGo stop - rm -rf /etc/v2ray-agent/trojan/* - rm -rf /etc/systemd/system/trojan-go.service - fi - installCronTLS 14 - handleXray stop - handleXray start - # 生成账号 - checkGFWStatue 15 - showAccounts 16 - else - echoContent red " ---> 输入不合法" - customXrayInstall - fi + # 安装V2Ray + installXray 8 + installXrayService 9 + initXrayConfig custom 10 + cleanUp v2rayDel + if echo "${selectCustomInstallType}" | grep -q 4; then + installTrojanGo 11 + installTrojanService 12 + initTrojanGoConfig 13 + handleTrojanGo stop + handleTrojanGo start + else + # 这里需要删除trojan的服务 + handleTrojanGo stop + rm -rf /etc/v2ray-agent/trojan/* + rm -rf /etc/systemd/system/trojan-go.service + fi + installCronTLS 14 + handleXray stop + handleXray start + # 生成账号 + checkGFWStatue 15 + showAccounts 16 + else + echoContent red " ---> 输入不合法" + customXrayInstall + fi } + # 选择核心安装---v2ray-core、xray-core、锁定版本的v2ray-core[xtls] -selectCoreInstall(){ - echoContent skyBlue "\n功能 1/${totalProgress} : 选择核心安装" - echoContent red "\n==============================================================" - echoContent yellow "1.Xray-core" - echoContent yellow "2.v2ray-core" - echoContent yellow "3.v2ray-core[XTLS]" - echoContent red "==============================================================" - read -p "请选择：" selectCoreType - case ${selectCoreType} in - 1) - - if [[ "${selectInstallType}" = "2" ]] - then - customXrayInstall - else - xrayCoreInstall - fi - ;; - 2) - v2rayCoreVersion= - if [[ "${selectInstallType}" = "2" ]] - then - customV2RayInstall - else - v2rayCoreInstall - fi - ;; - 3) - v2rayCoreVersion=v4.32.1 - if [[ "${selectInstallType}" = "2" ]] - then - customV2RayInstall - else - v2rayCoreInstall - fi - ;; - *) - echoContent red ' ---> 选择错误，重新选择' - selectCoreInstall - ;; - esac +selectCoreInstall() { + echoContent skyBlue "\n功能 1/${totalProgress} : 选择核心安装" + echoContent red "\n==============================================================" + echoContent yellow "1.Xray-core" + echoContent yellow "2.v2ray-core" + echoContent yellow "3.v2ray-core[XTLS]" + echoContent red "==============================================================" + read -r -p "请选择：" selectCoreType + case ${selectCoreType} in + "1") + if [[ "${selectInstallType}" == "2" ]]; then + customXrayInstall + else + xrayCoreInstall + fi + ;; + "2") + v2rayCoreVersion= + if [[ "${selectInstallType}" == "2" ]]; then + customV2RayInstall + else + v2rayCoreInstall + fi + ;; + "3") + v2rayCoreVersion=v4.32.1 + if [[ "${selectInstallType}" == "2" ]]; then + customV2RayInstall + else + v2rayCoreInstall + fi + ;; + *) + echoContent red ' ---> 选择错误，重新选择' + selectCoreInstall + ;; + esac } - # v2ray-core 安装 -v2rayCoreInstall(){ - cleanUp xrayClean - selectCustomInstallType= - totalProgress=17 - installTools 2 - # 申请tls - initTLSNginxConfig 3 - installTLS 4 - handleNginx stop - initNginxConfig 5 - randomPathFunction 6 - # 安装V2Ray - installV2Ray 7 - installV2RayService 8 - installTrojanGo 9 - installTrojanService 10 - customCDNIP 11 - initV2RayConfig all 12 - cleanUp xrayDel - initTrojanGoConfig 13 - installCronTLS 14 - nginxBlog 15 - updateRedirectNginxConf - handleV2Ray stop - sleep 2 - handleV2Ray start - handleNginx start - handleTrojanGo stop - sleep 1 - handleTrojanGo start - # 生成账号 - checkGFWStatue 16 - showAccounts 17 +v2rayCoreInstall() { + cleanUp xrayClean + selectCustomInstallType= + totalProgress=17 + installTools 2 + # 申请tls + initTLSNginxConfig 3 + installTLS 4 + handleNginx stop + initNginxConfig 5 + randomPathFunction 6 + # 安装V2Ray + installV2Ray 7 + installV2RayService 8 + installTrojanGo 9 + installTrojanService 10 + customCDNIP 11 + initV2RayConfig all 12 + cleanUp xrayDel + initTrojanGoConfig 13 + installCronTLS 14 + nginxBlog 15 + updateRedirectNginxConf + handleV2Ray stop + sleep 2 + handleV2Ray start + handleNginx start + handleTrojanGo stop + sleep 1 + handleTrojanGo start + # 生成账号 + checkGFWStatue 16 + showAccounts 17 } # xray-core 安装 -xrayCoreInstall(){ - cleanUp v2rayClean - selectCustomInstallType= +xrayCoreInstall() { + cleanUp v2rayClean + selectCustomInstallType= - totalProgress=17 - installTools 2 - # 申请tls - initTLSNginxConfig 3 - installTLS 4 - handleNginx stop - initNginxConfig 5 - randomPathFunction 6 - # 安装Xray - handleV2Ray stop - installXray 7 - installXrayService 8 - installTrojanGo 9 - installTrojanService 10 - customCDNIP 11 - initXrayConfig all 12 - cleanUp v2rayDel - initTrojanGoConfig 13 -# installCronTLS 14 - nginxBlog 15 - updateRedirectNginxConf - handleXray stop - sleep 2 - handleXray start + totalProgress=17 + installTools 2 + # 申请tls + initTLSNginxConfig 3 + installTLS 4 + handleNginx stop + initNginxConfig 5 + randomPathFunction 6 + # 安装Xray + handleV2Ray stop + installXray 7 + installXrayService 8 + installTrojanGo 9 + installTrojanService 10 + customCDNIP 11 + initXrayConfig all 12 + cleanUp v2rayDel + initTrojanGoConfig 13 + # installCronTLS 14 + nginxBlog 15 + updateRedirectNginxConf + handleXray stop + sleep 2 + handleXray start - handleNginx start - handleTrojanGo stop - sleep 1 - handleTrojanGo start - # 生成账号 - checkGFWStatue 16 - showAccounts 17 + handleNginx start + handleTrojanGo stop + sleep 1 + handleTrojanGo start + # 生成账号 + checkGFWStatue 16 + showAccounts 17 } # 核心管理 -coreVersionManageMenu(){ +coreVersionManageMenu() { - if [[ -z "${coreInstallType}" ]] - then - echoContent red "\n ---> 没有检测到安装目录，请执行脚本安装内容" - menu - exit 0; - fi - if [[ "${coreInstallType}" = "1" ]] - then - xrayVersionManageMenu 1 - elif [[ "${coreInstallType}" = "2" ]] - then - v2rayCoreVersion= - v2rayVersionManageMenu 1 + if [[ -z "${coreInstallType}" ]]; then + echoContent red "\n ---> 没有检测到安装目录，请执行脚本安装内容" + menu + exit 0 + fi + if [[ "${coreInstallType}" == "1" ]]; then + xrayVersionManageMenu 1 + elif [[ "${coreInstallType}" == "2" ]]; then + v2rayCoreVersion= + v2rayVersionManageMenu 1 - elif [[ "${coreInstallType}" = "3" ]] - then - v2rayCoreVersion=v4.32.1 - v2rayVersionManageMenu 1 - fi + elif [[ "${coreInstallType}" == "3" ]]; then + v2rayCoreVersion=v4.32.1 + v2rayVersionManageMenu 1 + fi } # 定时任务检查证书 -cronRenewTLS(){ - if [[ "${renewTLS}" = "RenewTLS" ]] - then - renewalTLS - exit 0; - fi +cronRenewTLS() { + if [[ "${renewTLS}" == "RenewTLS" ]]; then + renewalTLS + exit 0 + fi } # 主菜单 -menu(){ - cd - echoContent red "\n==============================================================" - echoContent green "作者：mack-a" - echoContent green "当前版本：v2.2.24" - echoContent green "Github：https://github.com/mack-a/v2ray-agent" - echoContent green "描述：七合一共存脚本" - echoContent red "==============================================================" - echoContent yellow "1.安装" - echoContent yellow "2.任意组合安装" - echoContent skyBlue "-------------------------工具管理-----------------------------" - echoContent yellow "3.查看账号" - echoContent yellow "4.更换伪装站" - echoContent yellow "5.更新证书" - echoContent yellow "6.更换CDN节点" - echoContent yellow "7.多用户管理" - echoContent yellow "8.ipv6人机验证" - echoContent skyBlue "-------------------------版本管理-----------------------------" - echoContent yellow "9.core版本管理" - echoContent yellow "10.更新Trojan-Go" - echoContent yellow "11.更新脚本" - echoContent yellow "12.安装BBR" - echoContent skyBlue "-------------------------脚本管理-----------------------------" - echoContent yellow "13.查看日志" - echoContent yellow "14.卸载脚本" - echoContent red "==============================================================" - mkdirTools - aliasInstall - read -p "请选择:" selectInstallType - case ${selectInstallType} in - 1) - selectCoreInstall - ;; - 2) - selectCoreInstall - ;; - 3) - showAccounts 1 - ;; - 4) - updateNginxBlog 1 - ;; - 5) - renewalTLS 1 - ;; - 6) - updateV2RayCDN 1 - ;; - 7) - manageUser 1 - ;; - 8) - ipv6HumanVerification - ;; - 9) - coreVersionManageMenu 1 - ;; - 10) - updateTrojanGo 1 - ;; - 11) - updateV2RayAgent 1 - ;; - 12) - bbrInstall - ;; - 13) - checkLog 1 - ;; - 14) - unInstall 1 - ;; - esac +menu() { + cd "$HOME" || exit + echoContent red "\n==============================================================" + echoContent green "作者：mack-a" + echoContent green "当前版本：v2.2.24" + echoContent green "Github：https://github.com/mack-a/v2ray-agent" + echoContent green "描述：七合一共存脚本" + echoContent red "==============================================================" + echoContent yellow "1.安装" + echoContent yellow "2.任意组合安装" + echoContent skyBlue "-------------------------工具管理-----------------------------" + echoContent yellow "3.查看账号" + echoContent yellow "4.更换伪装站" + echoContent yellow "5.更新证书" + echoContent yellow "6.更换CDN节点" + echoContent yellow "7.多用户管理" + echoContent yellow "8.ipv6人机验证" + echoContent skyBlue "-------------------------版本管理-----------------------------" + echoContent yellow "9.core版本管理" + echoContent yellow "10.更新Trojan-Go" + echoContent yellow "11.更新脚本" + echoContent yellow "12.安装BBR" + echoContent skyBlue "-------------------------脚本管理-----------------------------" + echoContent yellow "13.查看日志" + echoContent yellow "14.卸载脚本" + echoContent red "==============================================================" + mkdirTools + aliasInstall + read -r -p "请选择:" selectInstallType + case ${selectInstallType} in + 1) + selectCoreInstall + ;; + 2) + selectCoreInstall + ;; + 3) + showAccounts 1 + ;; + 4) + updateNginxBlog 1 + ;; + 5) + renewalTLS 1 + ;; + 6) + updateV2RayCDN 1 + ;; + 7) + manageUser 1 + ;; + 8) + ipv6HumanVerification + ;; + 9) + coreVersionManageMenu 1 + ;; + 10) + updateTrojanGo 1 + ;; + 11) + updateV2RayAgent 1 + ;; + 12) + bbrInstall + ;; + 13) + checkLog 1 + ;; + 14) + unInstall 1 + ;; + esac } cronRenewTLS menu