#!/usr/bin/env bash # 检测区 # ------------------------------------------------------------- # 检查系统 export LANG=en_US.UTF-8 echoContent() { case $1 in # 红色 "red") # shellcheck disable=SC2154 ${echoType} "\033[31m${printN}$2 \033[0m" ;; # 天蓝色 "skyBlue") ${echoType} "\033[1;36m${printN}$2 \033[0m" ;; # 绿色 "green") ${echoType} "\033[32m${printN}$2 \033[0m" ;; # 白色 "white") ${echoType} "\033[37m${printN}$2 \033[0m" ;; "magenta") ${echoType} "\033[31m${printN}$2 \033[0m" ;; # 黄色 "yellow") ${echoType} "\033[33m${printN}$2 \033[0m" ;; esac } checkSystem() { if [[ -n $(find /etc -name "redhat-release") ]] || grep " exit 1 ;; esac fi else echoContent red " 无法识别此CPU架构，默认amd64、x86_64--->" xrayCoreCPUVendor="Xray-linux-64" v2rayCoreCPUVendor="v2ray-linux-64" fi } # 初始化全局变量 initVar() { installType='yum -y install' removeType='yum -y remove' upgrade="yum -y update" echoType='echo -e' # 核心支持的cpu版本 xrayCoreCPUVendor="" v2rayCoreCPUVendor="" hysteriaCoreCPUVendor="" # 域名 domain= # CDN节点的address add= # 安装总进度 totalProgress=1 # 1.xray-core安装 # 2.v2ray-core 安装 # 3.v2ray-core[xtls] 安装 coreInstallType= # 核心安装path # coreInstallPath= # v2ctl Path ctlPath= # 1.全部安装 # 2.个性化安装 # v2rayAgentInstallType= # 当前的个性化安装方式 01234 currentInstallProtocolType= # 当前alpn的顺序 currentAlpn= # 前置类型 frontingType= # 选择的个性化安装方式 selectCustomInstallType= # v2ray-core、xray-core配置文件的路径 configPath= # hysteria 配置文件的路径 hysteriaConfigPath= # 配置文件的path currentPath= # 配置文件的host currentHost= # 安装时选择的core类型 selectCoreType= # 默认core版本 v2rayCoreVersion= # 随机路径 customPath= # centos version centosVersion= # UUID currentUUID= # previousClients previousClients= localIP= # 集成更新证书逻辑不再使用单独的脚本--RenewTLS renewTLS=$1 # tls安装失败后尝试的次数 installTLSCount= # BTPanel状态 # BTPanelStatus= # nginx配置文件路径 nginxConfigPath=/etc/nginx/conf.d/ # 是否为预览版 prereleaseStatus=false # ssl类型 sslType= # ssl邮箱 sslEmail= # 检查天数 sslRenewalDays=90 # dns ssl状态 dnsSSLStatus= # dns tls domain dnsTLSDomain= # 该域名是否通过dns安装通配符证书 installDNSACMEStatus= # 自定义端口 customPort= # hysteria端口 hysteriaPort= # hysteria协议 hysteriaProtocol= # hysteria延迟 hysteriaLag= # hysteria下行速度 hysteriaClientDownloadSpeed= # hysteria上行速度 hysteriaClientUploadSpeed= } # 读取tls证书详情 readAcmeTLS() { if [[ -n "${currentHost}" ]]; then dnsTLSDomain=$(echo "${currentHost}" | awk -F "[.]" '{print $(NF-1)"."$NF}') fi if [[ -d "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc" && -f "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc/*.${dnsTLSDomain}.key" && -f "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc/*.${dnsTLSDomain}.cer" ]]; then installDNSACMEStatus=true fi } # 读取默认自定义端口 readCustomPort() { if [[ -n "${configPath}" ]]; then local port= port=$(jq -r .inbounds[0].port "${configPath}${frontingType}.json") if [[ "${port}" != "443" ]]; then customPort=${port} fi fi } # 检测安装方式 readInstallType() { coreInstallType= configPath= hysteriaConfigPath= # 1.检测安装目录 if [[ -d "/etc/v2ray-agent" ]]; then # 检测安装方式 v2ray-core if [[ -d "/etc/v2ray-agent/v2ray" && -f "/etc/v2ray-agent/v2ray/v2ray" && -f "/etc/v2ray-agent/v2ray/v2ctl" ]]; then if [[ -d "/etc/v2ray-agent/v2ray/conf" && -f "/etc/v2ray-agent/v2ray/conf/02_VLESS_TCP_inbounds.json" ]]; then configPath=/etc/v2ray-agent/v2ray/conf/ if grep /dev/null | grep -q "active (exited)"; then local updateFirewalldStatus= if ! iptables -L | grep -q "$1(mack-a)"; then updateFirewalldStatus=true iptables -I INPUT -p ${type} --dport "$1" -m comment --comment "allow $1(mack-a)" -j ACCEPT fi if echo "${updateFirewalldStatus}" | grep -q "true"; then netfilter-persistent save fi elif systemctl status ufw 2>/dev/null | grep -q "active (exited)"; then if ufw status | grep -q "Status: active"; then if ! ufw status | grep -q "$1"; then sudo ufw allow "$1/${type}" checkUFWAllowPort "$1" fi fi elif systemctl status firewalld 2>/dev/null | grep -q "active (running)"; then local updateFirewalldStatus= if ! firewall-cmd --list-ports --permanent | grep -qw "$1/${type}"; then updateFirewalldStatus=true firewall-cmd --zone=public --add-port="$1/${type}" --permanent checkFirewalldAllowPort "$1" fi if echo "${updateFirewalldStatus}" | grep -q "true"; then firewall-cmd --reload fi fi } # 检查80、443端口占用情况 checkPortUsedStatus() { if lsof -i tcp:80 | grep -q LISTEN; then echoContent red "\n ---> 80端口被占用，请手动关闭后安装\n" lsof -i tcp:80 | grep LISTEN exit 0 fi if lsof -i tcp:443 | grep -q LISTEN; then echoContent red "\n ---> 443端口被占用，请手动关闭后安装\n" lsof -i tcp:80 | grep LISTEN exit 0 fi } # 输出ufw端口开放状态 checkUFWAllowPort() { if ufw status | grep -q "$1"; then echoContent green " ---> $1端口开放成功" else echoContent red " ---> $1端口开放失败" exit 0 fi } # 输出firewall-cmd端口开放状态 checkFirewalldAllowPort() { if firewall-cmd --list-ports --permanent | grep -q "$1"; then echoContent green " ---> $1端口开放成功" else echoContent red " ---> $1端口开放失败" exit 0 fi } # 读取hysteria网络环境 readHysteriaConfig() { if [[ -n "${hysteriaConfigPath}" ]]; then hysteriaLag=$(jq -r .hysteriaLag <"${hysteriaConfigPath}client_network.json") hysteriaClientDownloadSpeed=$(jq -r .hysteriaClientDownloadSpeed <"${hysteriaConfigPath}client_network.json") hysteriaClientUploadSpeed=$(jq -r .hysteriaClientUploadSpeed <"${hysteriaConfigPath}client_network.json") hysteriaPort=$(jq -r .listen <"${hysteriaConfigPath}config.json" | awk -F "[:]" '{print $2}') hysteriaProtocol=$(jq -r .protocol <"${hysteriaConfigPath}config.json") fi } # 检查文件目录以及path路径 readConfigHostPathUUID() { currentPath= currentDefaultPort= currentUUID= currentHost= currentPort= currentAdd= # 读取path if [[ -n "${configPath}" ]]; then local fallback fallback=$(jq -r -c '.inbounds[0].settings.fallbacks[]|select(.path)' ${configPath}${frontingType}.json | head -1) local path path=$(echo "${fallback}" | jq -r .path | awk -F "[/]" '{print $2}') if [[ $(echo "${fallback}" | jq -r .dest) == 31297 ]]; then currentPath=$(echo "${path}" | awk -F "[w][s]" '{print $1}') elif [[ $(echo "${fallback}" | jq -r .dest) == 31298 ]]; then currentPath=$(echo "${path}" | awk -F "[t][c][p]" '{print $1}') elif [[ $(echo "${fallback}" | jq -r .dest) == 31299 ]]; then currentPath=$(echo "${path}" | awk -F "[v][w][s]" '{print $1}') fi # 尝试读取alpn h2 Path if [[ -z "${currentPath}" ]]; then dest=$(jq -r -c '.inbounds[0].settings.fallbacks[]|select(.alpn)|.dest' ${configPath}${frontingType}.json | head -1) if [[ "${dest}" == "31302" || "${dest}" == "31304" ]]; then if grep -q "trojangrpc {" <${nginxConfigPath}alone.conf; then currentPath=$(grep "trojangrpc {" <${nginxConfigPath}alone.conf | awk -F "[/]" '{print $2}' | awk -F "[t][r][o][j][a][n]" '{print $1}') elif grep -q "grpc {" <${nginxConfigPath}alone.conf; then currentPath=$(grep "grpc {" <${nginxConfigPath}alone.conf | head -1 | awk -F "[/]" '{print $2}' | awk -F "[g][r][p][c]" '{print $1}') fi fi fi local defaultPortFile= defaultPortFile=$(find ${configPath}* | grep "default") if [[ -n "${defaultPortFile}" ]]; then currentDefaultPort=$(echo "${defaultPortFile}" | awk -F [_] '{print $4}') else currentDefaultPort=$(jq -r .inbounds[0].port ${configPath}${frontingType}.json) fi fi if [[ "${coreInstallType}" == "1" ]]; then currentHost=$(jq -r .inbounds[0].streamSettings.tlsSettings.certificates[0].certificateFile ${configPath}${frontingType}.json | awk -F '[t][l][s][/]' '{print $2}' | awk -F '[.][c][r][t]' '{print $1}') currentUUID=$(jq -r .inbounds[0].settings.clients[0].id ${configPath}${frontingType}.json) currentAdd=$(jq -r .inbounds[0].settings.clients[0].add ${configPath}${frontingType}.json) if [[ "${currentAdd}" == "null" ]]; then currentAdd=${currentHost} fi currentPort=$(jq .inbounds[0].port ${configPath}${frontingType}.json) elif [[ "${coreInstallType}" == "2" ]]; then currentHost=$(jq -r .inbounds[0].streamSettings.tlsSettings.certificates[0].certificateFile ${configPath}${frontingType}.json | awk -F '[t][l][s][/]' '{print $2}' | awk -F '[.][c][r][t]' '{print $1}') currentAdd=$(jq -r .inbounds[0].settings.clients[0].add ${configPath}${frontingType}.json) if [[ "${currentAdd}" == "null" ]]; then currentAdd=${currentHost} fi currentUUID=$(jq -r .inbounds[0].settings.clients[0].id ${configPath}${frontingType}.json) currentPort=$(jq .inbounds[0].port ${configPath}${frontingType}.json) fi } # 状态展示 showInstallStatus() { if [[ -n "${coreInstallType}" ]]; then if [[ "${coreInstallType}" == 1 ]]; then if [[ -n $(pgrep -f xray/xray) ]]; then echoContent yellow "\n核心: Xray-core[运行中]" else echoContent yellow "\n核心: Xray-core[未运行]" fi elif [[ "${coreInstallType}" == 2 || "${coreInstallType}" == 3 ]]; then if [[ -n $(pgrep -f v2ray/v2ray) ]]; then echoContent yellow "\n核心: v2ray-core[运行中]" else echoContent yellow "\n核心: v2ray-core[未运行]" fi fi # 读取协议类型 readInstallProtocolType if [[ -n ${currentInstallProtocolType} ]]; then echoContent yellow "已安装协议: \c" fi if echo ${currentInstallProtocolType} | grep -q 0; then if [[ "${coreInstallType}" == 2 ]]; then echoContent yellow "VLESS+TCP[TLS] \c" else echoContent yellow "VLESS+TCP[TLS/XTLS] \c" fi fi if echo ${currentInstallProtocolType} | grep -q trojan; then if [[ "${coreInstallType}" == 1 ]]; then echoContent yellow "Trojan+TCP[TLS/XTLS] \c" fi fi if echo ${currentInstallProtocolType} | grep -q 1; then echoContent yellow "VLESS+WS[TLS] \c" fi if echo ${currentInstallProtocolType} | grep -q 2; then echoContent yellow "Trojan+gRPC[TLS] \c" fi if echo ${currentInstallProtocolType} | grep -q 3; then echoContent yellow "VMess+WS[TLS] \c" fi if echo ${currentInstallProtocolType} | grep -q 4; then echoContent yellow "Trojan+TCP[TLS] \c" fi if echo ${currentInstallProtocolType} | grep -q 5; then echoContent yellow "VLESS+gRPC[TLS] \c" fi fi } # 清理旧残留 cleanUp() { if [[ "$1" == "v2rayClean" ]]; then rm -rf "$(find /etc/v2ray-agent/v2ray/* | grep -E '(config_full.json|conf)')" handleV2Ray stop >/dev/null rm -f /etc/systemd/system/v2ray.service elif [[ "$1" == "xrayClean" ]]; then rm -rf "$(find /etc/v2ray-agent/xray/* | grep -E '(config_full.json|conf)')" handleXray stop >/dev/null rm -f /etc/systemd/system/xray.service elif [[ "$1" == "v2rayDel" ]]; then rm -rf /etc/v2ray-agent/v2ray/* elif [[ "$1" == "xrayDel" ]]; then rm -rf /etc/v2ray-agent/xray/* fi } initVar "$1" checkSystem checkCPUVendor readInstallType readInstallProtocolType readConfigHostPathUUID readInstallAlpn readCustomPort checkBTPanel # ------------------------------------------------------------- # 初始化安装目录 mkdirTools() { mkdir -p /etc/v2ray-agent/tls mkdir -p /etc/v2ray-agent/subscribe mkdir -p /etc/v2ray-agent/subscribe_tmp mkdir -p /etc/v2ray-agent/v2ray/conf mkdir -p /etc/v2ray-agent/v2ray/tmp mkdir -p /etc/v2ray-agent/xray/conf mkdir -p /etc/v2ray-agent/xray/tmp mkdir -p /etc/v2ray-agent/trojan mkdir -p /etc/v2ray-agent/hysteria/conf mkdir -p /etc/systemd/system/ mkdir -p /tmp/v2ray-agent-tls/ } # 安装工具包 installTools() { echoContent skyBlue "\n进度 $1/${totalProgress} : 安装工具" # 修复ubuntu个别系统问题 if [[ "${release}" == "ubuntu" ]]; then dpkg --configure -a fi if [[ -n $(pgrep -f "apt") ]]; then pgrep -f apt | xargs kill -9 fi echoContent green " ---> 检查、安装更新【新机器会很慢，如长时间无反应，请手动停止后重新执行】" ${upgrade} >/etc/v2ray-agent/install.log 2>&1 if grep <"/etc/v2ray-agent/install.log" -q "changed"; then ${updateReleaseInfoChange} >/dev/null 2>&1 fi if [[ "${release}" == "centos" ]]; then rm -rf /var/run/yum.pid ${installType} epel-release >/dev/null 2>&1 fi # [[ -z `find /usr/bin /usr/sbin |grep -v grep|grep -w curl` ]] if ! find /usr/bin /usr/sbin | grep -q -w wget; then echoContent green " ---> 安装wget" ${installType} wget >/dev/null 2>&1 fi if ! find /usr/bin /usr/sbin | grep -q -w curl; then echoContent green " ---> 安装curl" ${installType} curl >/dev/null 2>&1 fi if ! find /usr/bin /usr/sbin | grep -q -w unzip; then echoContent green " ---> 安装unzip" ${installType} unzip >/dev/null 2>&1 fi if ! find /usr/bin /usr/sbin | grep -q -w socat; then echoContent green " ---> 安装socat" ${installType} socat >/dev/null 2>&1 fi if ! find /usr/bin /usr/sbin | grep -q -w tar; then echoContent green " ---> 安装tar" ${installType} tar >/dev/null 2>&1 fi if ! find /usr/bin /usr/sbin | grep -q -w cron; then echoContent green " ---> 安装crontabs" if [[ "${release}" == "ubuntu" ]] || [[ "${release}" == "debian" ]]; then ${installType} cron >/dev/null 2>&1 else ${installType} crontabs >/dev/null 2>&1 fi fi if ! find /usr/bin /usr/sbin | grep -q -w jq; then echoContent green " ---> 安装jq" ${installType} jq >/dev/null 2>&1 fi if ! find /usr/bin /usr/sbin | grep -q -w binutils; then echoContent green " ---> 安装binutils" ${installType} binutils >/dev/null 2>&1 fi if ! find /usr/bin /usr/sbin | grep -q -w ping6; then echoContent green " ---> 安装ping6" ${installType} inetutils-ping >/dev/null 2>&1 fi if ! find /usr/bin /usr/sbin | grep -q -w qrencode; then echoContent green " ---> 安装qrencode" ${installType} qrencode >/dev/null 2>&1 fi if ! find /usr/bin /usr/sbin | grep -q -w sudo; then echoContent green " ---> 安装sudo" ${installType} sudo >/dev/null 2>&1 fi if ! find /usr/bin /usr/sbin | grep -q -w lsb-release; then echoContent green " ---> 安装lsb-release" ${installType} lsb-release >/dev/null 2>&1 fi if ! find /usr/bin /usr/sbin | grep -q -w lsof; then echoContent green " ---> 安装lsof" ${installType} lsof >/dev/null 2>&1 fi if ! find /usr/bin /usr/sbin | grep -q -w dig; then echoContent green " ---> 安装dig" if echo "${installType}" | grep -q -w "apt"; then ${installType} dnsutils >/dev/null 2>&1 elif echo "${installType}" | grep -q -w "yum"; then ${installType} bind-utils >/dev/null 2>&1 fi fi # 检测nginx版本，并提供是否卸载的选项 if ! find /usr/bin /usr/sbin | grep -q -w nginx; then echoContent green " ---> 安装nginx" installNginxTools else nginxVersion=$(nginx -v 2>&1) nginxVersion=$(echo "${nginxVersion}" | awk -F "[n][g][i][n][x][/]" '{print $2}' | awk -F "[.]" '{print $2}') if [[ ${nginxVersion} -lt 14 ]]; then read -r -p "读取到当前的Nginx版本不支持gRPC，会导致安装失败，是否卸载Nginx后重新安装 ？[y/n]:" unInstallNginxStatus if [[ "${unInstallNginxStatus}" == "y" ]]; then ${removeType} nginx >/dev/null 2>&1 echoContent yellow " ---> nginx卸载完成" echoContent green " ---> 安装nginx" installNginxTools >/dev/null 2>&1 else exit 0 fi fi fi if ! find /usr/bin /usr/sbin | grep -q -w semanage; then echoContent green " ---> 安装semanage" ${installType} bash-completion >/dev/null 2>&1 if [[ "${centosVersion}" == "7" ]]; then policyCoreUtils="policycoreutils-python.x86_64" elif [[ "${centosVersion}" == "8" ]]; then policyCoreUtils="policycoreutils-python-utils-2.9-9.el8.noarch" fi if [[ -n "${policyCoreUtils}" ]]; then ${installType} ${policyCoreUtils} >/dev/null 2>&1 fi if [[ -n $(which semanage) ]]; then semanage port -a -t http_port_t -p tcp 31300 fi fi if [[ ! -d "$HOME/.acme.sh" ]] || [[ -d "$HOME/.acme.sh" && -z $(find "$HOME/.acme.sh/acme.sh") ]]; then echoContent green " ---> 安装acme.sh" curl -s https://get.acme.sh | sh >/etc/v2ray-agent/tls/acme.log 2>&1 if [[ ! -d "$HOME/.acme.sh" ]] || [[ -z $(find "$HOME/.acme.sh/acme.sh") ]]; then echoContent red " acme安装失败--->" tail -n 100 /etc/v2ray-agent/tls/acme.log echoContent yellow "错误排查:" echoContent red " 1.获取Github文件失败，请等待Github恢复后尝试，恢复进度可查看 [https://www.githubstatus.com/]" echoContent red " 2.acme.sh脚本出现bug，可查看[https://github.com/acmesh-official/acme.sh] issues" echoContent red " 3.如纯IPv6机器，请设置NAT64,可执行下方命令" echoContent skyBlue " echo -e \"nameserver 2001:67c:2b0::4\\\nnameserver 2001:67c:2b0::6\" >> /etc/resolv.conf" exit 0 fi fi } # 安装Nginx installNginxTools() { if [[ "${release}" == "debian" ]]; then sudo apt install gnupg2 ca-certificates lsb-release -y >/dev/null 2>&1 echo "deb http://nginx.org/packages/mainline/debian $(lsb_release -cs) nginx" | sudo tee /etc/apt/sources.list.d/nginx.list >/dev/null 2>&1 echo -e "Package: *\nPin: origin nginx.org\nPin: release o=nginx\nPin-Priority: 900\n" | sudo tee /etc/apt/preferences.d/99nginx >/dev/null 2>&1 curl -o /tmp/nginx_signing.key https://nginx.org/keys/nginx_signing.key >/dev/null 2>&1 # gpg --dry-run --quiet --import --import-options import-show /tmp/nginx_signing.key sudo mv /tmp/nginx_signing.key /etc/apt/trusted.gpg.d/nginx_signing.asc sudo apt update >/dev/null 2>&1 elif [[ "${release}" == "ubuntu" ]]; then sudo apt install gnupg2 ca-certificates lsb-release -y >/dev/null 2>&1 echo "deb http://nginx.org/packages/mainline/ubuntu $(lsb_release -cs) nginx" | sudo tee /etc/apt/sources.list.d/nginx.list >/dev/null 2>&1 echo -e "Package: *\nPin: origin nginx.org\nPin: release o=nginx\nPin-Priority: 900\n" | sudo tee /etc/apt/preferences.d/99nginx >/dev/null 2>&1 curl -o /tmp/nginx_signing.key https://nginx.org/keys/nginx_signing.key >/dev/null 2>&1 # gpg --dry-run --quiet --import --import-options import-show /tmp/nginx_signing.key sudo mv /tmp/nginx_signing.key /etc/apt/trusted.gpg.d/nginx_signing.asc sudo apt update >/dev/null 2>&1 elif [[ "${release}" == "centos" ]]; then ${installType} yum-utils >/dev/null 2>&1 cat </etc/yum.repos.d/nginx.repo [nginx-stable] name=nginx stable repo baseurl=http://nginx.org/packages/centos/\$releasever/\$basearch/ gpgcheck=1 enabled=1 gpgkey=https://nginx.org/keys/nginx_signing.key module_hotfixes=true [nginx-mainline] name=nginx mainline repo baseurl=http://nginx.org/packages/mainline/centos/\$releasever/\$basearch/ gpgcheck=1 enabled=0 gpgkey=https://nginx.org/keys/nginx_signing.key module_hotfixes=true EOF sudo yum-config-manager --enable nginx-mainline >/dev/null 2>&1 fi ${installType} nginx >/dev/null 2>&1 systemctl daemon-reload systemctl enable nginx } # 安装warp installWarp() { ${installType} gnupg2 -y >/dev/null 2>&1 if [[ "${release}" == "debian" ]]; then curl -s https://pkg.cloudflareclient.com/pubkey.gpg | sudo apt-key add - >/dev/null 2>&1 echo "deb http://pkg.cloudflareclient.com/ $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/cloudflare-client.list >/dev/null 2>&1 sudo apt update >/dev/null 2>&1 elif [[ "${release}" == "ubuntu" ]]; then curl -s https://pkg.cloudflareclient.com/pubkey.gpg | sudo apt-key add - >/dev/null 2>&1 echo "deb http://pkg.cloudflareclient.com/ focal main" | sudo tee /etc/apt/sources.list.d/cloudflare-client.list >/dev/null 2>&1 sudo apt update >/dev/null 2>&1 elif [[ "${release}" == "centos" ]]; then ${installType} yum-utils >/dev/null 2>&1 sudo rpm -ivh "http://pkg.cloudflareclient.com/cloudflare-release-el${centosVersion}.rpm" >/dev/null 2>&1 fi echoContent green " ---> 安装WARP" ${installType} cloudflare-warp >/dev/null 2>&1 if [[ -z $(which warp-cli) ]]; then echoContent red " ---> 安装WARP失败" exit 0 fi systemctl enable warp-svc warp-cli --accept-tos register warp-cli --accept-tos set-mode proxy warp-cli --accept-tos set-proxy-port 31303 warp-cli --accept-tos connect warp-cli --accept-tos enable-always-on # if [[]];then # fi # todo curl --socks5 127.0.0.1:31303 https://www.cloudflare.com/cdn-cgi/trace # systemctl daemon-reload # systemctl enable cloudflare-warp } # 初始化Nginx申请证书配置 initTLSNginxConfig() { handleNginx stop echoContent skyBlue "\n进度 $1/${totalProgress} : 初始化Nginx申请证书配置" if [[ -n "${currentHost}" ]]; then echo read -r -p "读取到上次安装记录，是否使用上次安装时的域名 ？[y/n]:" historyDomainStatus if [[ "${historyDomainStatus}" == "y" ]]; then domain=${currentHost} echoContent yellow "\n ---> 域名: ${domain}" else echo echoContent yellow "请输入要配置的域名 例: www.v2ray-agent.com --->" read -r -p "域名:" domain fi else echo echoContent yellow "请输入要配置的域名 例: www.v2ray-agent.com --->" read -r -p "域名:" domain fi if [[ -z ${domain} ]]; then echoContent red " 域名不可为空--->" initTLSNginxConfig 3 else dnsTLSDomain=$(echo "${domain}" | awk -F "[.]" '{print $(NF-1)"."$NF}') customPortFunction local port=80 if [[ -n "${customPort}" ]]; then port=${customPort} fi # 修改配置 touch ${nginxConfigPath}alone.conf cat <${nginxConfigPath}alone.conf server { listen ${port}; listen [::]:${port}; server_name ${domain}; root /usr/share/nginx/html; location ~ /.well-known { allow all; } location /test { return 200 'fjkvymb6len'; } location /ip { proxy_set_header Host \$host; proxy_set_header X-Real-IP \$remote_addr; proxy_set_header REMOTE-HOST \$remote_addr; proxy_set_header X-Forwarded-For \$proxy_add_x_forwarded_for; default_type text/plain; return 200 \$proxy_add_x_forwarded_for; } } EOF fi readAcmeTLS } # 修改nginx重定向配置 updateRedirectNginxConf() { # if [[ ${BTPanelStatus} == "true" ]]; then # # cat <${nginxConfigPath}alone.conf # server { # listen 127.0.0.1:31300; # server_name _; # return 403; # } #EOF # # elif [[ -n "${customPort}" ]]; then # cat <${nginxConfigPath}alone.conf # server { # listen 127.0.0.1:31300; # server_name _; # return 403; # } #EOF # fi local redirectDomain=${domain} if [[ -n "${customPort}" ]]; then redirectDomain=${domain}:${customPort} fi cat <${nginxConfigPath}alone.conf server { listen 80; server_name ${domain}; return 302 https://${redirectDomain}; } server { listen 127.0.0.1:31300; server_name _; return 403; } EOF if echo "${selectCustomInstallType}" | grep -q 2 && echo "${selectCustomInstallType}" | grep -q 5 || [[ -z "${selectCustomInstallType}" ]]; then cat <>${nginxConfigPath}alone.conf server { listen 127.0.0.1:31302 http2 so_keepalive=on; server_name ${domain}; root /usr/share/nginx/html; client_header_timeout 1071906480m; keepalive_timeout 1071906480m; location /s/ { add_header Content-Type text/plain; alias /etc/v2ray-agent/subscribe/; } location /${currentPath}grpc { if (\$content_type !~ "application/grpc") { return 404; } client_max_body_size 0; grpc_set_header X-Real-IP \$proxy_add_x_forwarded_for; client_body_timeout 1071906480m; grpc_read_timeout 1071906480m; grpc_pass grpc://127.0.0.1:31301; } location /${currentPath}trojangrpc { if (\$content_type !~ "application/grpc") { return 404; } client_max_body_size 0; grpc_set_header X-Real-IP \$proxy_add_x_forwarded_for; client_body_timeout 1071906480m; grpc_read_timeout 1071906480m; grpc_pass grpc://127.0.0.1:31304; } location / { add_header Strict-Transport-Security "max-age=15552000; preload" always; } } EOF elif echo "${selectCustomInstallType}" | grep -q 5 || [[ -z "${selectCustomInstallType}" ]]; then cat <>${nginxConfigPath}alone.conf server { listen 127.0.0.1:31302 http2; server_name ${domain}; root /usr/share/nginx/html; location /s/ { add_header Content-Type text/plain; alias /etc/v2ray-agent/subscribe/; } location /${currentPath}grpc { client_max_body_size 0; # keepalive_time 1071906480m; keepalive_requests 4294967296; client_body_timeout 1071906480m; send_timeout 1071906480m; lingering_close always; grpc_read_timeout 1071906480m; grpc_send_timeout 1071906480m; grpc_pass grpc://127.0.0.1:31301; } } EOF elif echo "${selectCustomInstallType}" | grep -q 2 || [[ -z "${selectCustomInstallType}" ]]; then cat <>${nginxConfigPath}alone.conf server { listen 127.0.0.1:31302 http2; server_name ${domain}; root /usr/share/nginx/html; location /s/ { add_header Content-Type text/plain; alias /etc/v2ray-agent/subscribe/; } location /${currentPath}trojangrpc { client_max_body_size 0; # keepalive_time 1071906480m; keepalive_requests 4294967296; client_body_timeout 1071906480m; send_timeout 1071906480m; lingering_close always; grpc_read_timeout 1071906480m; grpc_send_timeout 1071906480m; grpc_pass grpc://127.0.0.1:31301; } } EOF else cat <>${nginxConfigPath}alone.conf server { listen 127.0.0.1:31302 http2; server_name ${domain}; root /usr/share/nginx/html; location /s/ { add_header Content-Type text/plain; alias /etc/v2ray-agent/subscribe/; } location / { } } EOF fi cat <>${nginxConfigPath}alone.conf server { listen 127.0.0.1:31300; server_name ${domain}; root /usr/share/nginx/html; location /s/ { add_header Content-Type text/plain; alias /etc/v2ray-agent/subscribe/; } location / { add_header Strict-Transport-Security "max-age=15552000; preload" always; } } EOF } # 检查ip checkIP() { echoContent skyBlue "\n ---> 检查域名ip中" local checkDomain=${domain} if [[ -n "${customPort}" ]]; then checkDomain="http://${domain}:${customPort}" fi localIP=$(curl -s -m 2 "${checkDomain}/ip") handleNginx stop if [[ -z ${localIP} ]] || ! echo "${localIP}" | sed '1{s/[^(]*(//;s/).*//;q}' | grep -q '\.' && ! echo "${localIP}" | sed '1{s/[^(]*(//;s/).*//;q}' | grep -q ':'; then echoContent red "\n ---> 未检测到当前域名的ip" echoContent skyBlue " ---> 请依次进行下列检查" echoContent yellow " ---> 1.检查域名是否书写正确" echoContent yellow " ---> 2.检查域名dns解析是否正确" echoContent yellow " ---> 3.如解析正确，请等待dns生效，预计三分钟内生效" echoContent yellow " ---> 4.如报Nginx启动问题，请手动启动nginx查看错误，如自己无法处理请提issues" echoContent yellow " ---> 5.错误日志:${localIP}" echo echoContent skyBlue " ---> 如以上设置都正确，请重新安装纯净系统后再次尝试" if [[ -n ${localIP} ]]; then echoContent yellow " ---> 检测返回值异常，建议手动卸载nginx后重新执行脚本" fi local portFirewallPortStatus="443、80" if [[ -n "${customPort}" ]]; then portFirewallPortStatus="${customPort}" fi echoContent red " ---> 请检查防火墙规则是否开放${portFirewallPortStatus}\n" read -r -p "是否通过脚本修改防火墙规则开放${portFirewallPortStatus}端口？[y/n]:" allPortFirewallStatus if [[ ${allPortFirewallStatus} == "y" ]]; then if [[ -n "${customPort}" ]]; then allowPort "${customPort}" else allowPort 80 allowPort 443 fi handleNginx start checkIP else exit 0 fi else if echo "${localIP}" | awk -F "[,]" '{print $2}' | grep -q "." || echo "${localIP}" | awk -F "[,]" '{print $2}' | grep -q ":"; then echoContent red "\n ---> 检测到多个ip，请确认是否关闭cloudflare的云朵" echoContent yellow " ---> 关闭云朵后等待三分钟后重试" echoContent yellow " ---> 检测到的ip如下:[${localIP}]" exit 0 fi echoContent green " ---> 当前域名ip为:[${localIP}]" fi } # 自定义email customSSLEmail() { if echo "$1" | grep -q "validate email"; then read -r -p "是否重新输入邮箱地址[y/n]:" sslEmailStatus if [[ "${sslEmailStatus}" == "y" ]]; then sed '/ACCOUNT_EMAIL/d' /root/.acme.sh/account.conf >/root/.acme.sh/account.conf_tmp && mv /root/.acme.sh/account.conf_tmp /root/.acme.sh/account.conf else exit 0 fi fi if [[ -d "/root/.acme.sh" && -f "/root/.acme.sh/account.conf" ]]; then if ! grep -q "ACCOUNT_EMAIL" <"/root/.acme.sh/account.conf" && ! echo "${sslType}" | grep -q "letsencrypt"; then read -r -p "请输入邮箱地址:" sslEmail if echo "${sslEmail}" | grep -q "@"; then echo "ACCOUNT_EMAIL='${sslEmail}'" >>/root/.acme.sh/account.conf echoContent green " ---> 添加成功" else echoContent yellow "请重新输入正确的邮箱格式[例: username@example.com]" customSSLEmail fi fi fi } # 选择ssl安装类型 switchSSLType() { if [[ -z "${sslType}" ]]; then echoContent red "\n==============================================================" echoContent yellow "1.letsencrypt[默认]" echoContent yellow "2.zerossl" echoContent yellow "3.buypass[不支持DNS申请]" echoContent red "==============================================================" read -r -p "请选择[回车]使用默认:" selectSSLType case ${selectSSLType} in 1) sslType="letsencrypt" ;; 2) sslType="zerossl" ;; 3) sslType="buypass" ;; *) sslType="letsencrypt" ;; esac touch /etc/v2ray-agent/tls echo "${sslType}" >/etc/v2ray-agent/tls/ssl_type fi } # 选择acme安装证书方式 selectAcmeInstallSSL() { local installSSLIPv6= if echo "${localIP}" | grep -q ":"; then installSSLIPv6="--listen-v6" fi echo if [[ -n "${customPort}" ]]; then if [[ "${selectSSLType}" == "3" ]]; then echoContent red " ---> buypass不支持免费通配符证书" echo exit fi dnsSSLStatus=true else read -r -p "是否使用DNS申请证书[y/n]:" installSSLDNStatus if [[ ${installSSLDNStatus} == 'y' ]]; then dnsSSLStatus=true fi fi acmeInstallSSL readAcmeTLS } # 安装SSL证书 acmeInstallSSL() { if [[ "${dnsSSLStatus}" == "true" ]]; then sudo "$HOME/.acme.sh/acme.sh" --issue -d "*.${dnsTLSDomain}" -d "${dnsTLSDomain}" --dns --yes-I-know-dns-manual-mode-enough-go-ahead-please -k ec-256 --server "${sslType}" ${installSSLIPv6} 2>&1 | tee -a /etc/v2ray-agent/tls/acme.log >/dev/null local txtValue= txtValue=$(tail -n 10 /etc/v2ray-agent/tls/acme.log | grep "TXT value" | awk -F "'" '{print $2}') if [[ -n "${txtValue}" ]]; then echoContent green " ---> 请手动添加DNS TXT记录" echoContent yellow " ---> 添加方法请参考此教程，https://github.com/mack-a/v2ray-agent/blob/master/documents/dns_txt.md" echoContent yellow " ---> 如同一个域名多台机器安装通配符证书，请添加多个TXT记录，不需要修改以前添加的TXT记录" echoContent green " ---> name：_acme-challenge" echoContent green " ---> value：${txtValue}" echoContent yellow " ---> 添加完成后等请等待1-2分钟" echo read -r -p "是否添加完成[y/n]:" addDNSTXTRecordStatus if [[ "${addDNSTXTRecordStatus}" == "y" ]]; then local txtAnswer= txtAnswer=$(dig +nocmd "_acme-challenge.${dnsTLSDomain}" txt +noall +answer | awk -F "[\"]" '{print $2}') if echo "${txtAnswer}" | grep -q "^${txtValue}"; then echoContent green " ---> TXT记录验证通过" echoContent green " ---> 生成证书中" sudo "$HOME/.acme.sh/acme.sh" --renew -d "*.${dnsTLSDomain}" -d "${dnsTLSDomain}" --yes-I-know-dns-manual-mode-enough-go-ahead-please --ecc --server "${sslType}" ${installSSLIPv6} 2>&1 | tee -a /etc/v2ray-agent/tls/acme.log >/dev/null else echoContent red " ---> 验证失败，请等待1-2分钟后重新尝试" acmeInstallSSL fi else echoContent red " ---> 放弃" exit 0 fi fi else echoContent green " ---> 生成证书中" sudo "$HOME/.acme.sh/acme.sh" --issue -d "${tlsDomain}" --standalone -k ec-256 --server "${sslType}" ${installSSLIPv6} 2>&1 | tee -a /etc/v2ray-agent/tls/acme.log >/dev/null fi } # 自定义端口 customPortFunction() { local historyCustomPortStatus= local showPort= if [[ -n "${customPort}" || -n "${currentPort}" ]]; then echo read -r -p "读取到上次安装时的端口，是否使用上次安装时的端口 ？[y/n]:" historyCustomPortStatus if [[ "${historyCustomPortStatus}" == "y" ]]; then showPort="${currentPort}" if [[ -n "${customPort}" ]]; then showPort="${customPort}" fi echoContent yellow "\n ---> 端口: ${showPort}" fi fi if [[ "${historyCustomPortStatus}" == "n" ]] && [[ -z "${customPort}" && -z "${currentPort}" ]]; then echo echoContent yellow "请输入端口[默认: 443]，如自定义端口，只允许使用DNS申请证书[回车使用默认]" read -r -p "端口:" customPort if [[ -n "${customPort}" ]]; then if ((customPort >= 1 && customPort <= 65535)); then checkCustomPort allowPort "${customPort}" else echoContent red " ---> 端口输入错误" exit fi else echoContent yellow "\n ---> 端口: 443" fi fi } # 检测端口是否占用 checkCustomPort() { if lsof -i "tcp:${customPort}" | grep -q LISTEN; then echoContent red "\n ---> ${customPort}端口被占用，请手动关闭后安装\n" lsof -i tcp:80 | grep LISTEN exit 0 fi } # 安装TLS installTLS() { echoContent skyBlue "\n进度 $1/${totalProgress} : 申请TLS证书\n" local tlsDomain=${domain} # 安装tls if [[ -f "/etc/v2ray-agent/tls/${tlsDomain}.crt" && -f "/etc/v2ray-agent/tls/${tlsDomain}.key" && -n $(cat "/etc/v2ray-agent/tls/${tlsDomain}.crt") ]] || [[ -d "$HOME/.acme.sh/${tlsDomain}_ecc" && -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.key" && -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.cer" ]]; then echoContent green " ---> 检测到证书" # checkTLStatus renewalTLS if [[ -z $(find /etc/v2ray-agent/tls/ -name "${tlsDomain}.crt") ]] || [[ -z $(find /etc/v2ray-agent/tls/ -name "${tlsDomain}.key") ]] || [[ -z $(cat "/etc/v2ray-agent/tls/${tlsDomain}.crt") ]]; then sudo "$HOME/.acme.sh/acme.sh" --installcert -d "${tlsDomain}" --fullchainpath "/etc/v2ray-agent/tls/${tlsDomain}.crt" --keypath "/etc/v2ray-agent/tls/${tlsDomain}.key" --ecc >/dev/null else echoContent yellow " ---> 如未过期或者自定义证书请选择[n]\n" read -r -p "是否重新安装？[y/n]:" reInstallStatus if [[ "${reInstallStatus}" == "y" ]]; then rm -rf /etc/v2ray-agent/tls/* installTLS "$1" fi fi elif [[ -d "$HOME/.acme.sh" ]] && [[ ! -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.cer" || ! -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.key" ]]; then echoContent green " ---> 安装TLS证书" if [[ "${installDNSACMEStatus}" != "true" ]]; then switchSSLType customSSLEmail selectAcmeInstallSSL else echoContent green " ---> 检测到已安装通配符证书，自动生成中" fi if [[ "${installDNSACMEStatus}" == "true" ]]; then echo if [[ -d "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc" && -f "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc/*.${dnsTLSDomain}.key" && -f "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc/*.${dnsTLSDomain}.cer" ]]; then sudo "$HOME/.acme.sh/acme.sh" --installcert -d "*.${dnsTLSDomain}" --fullchainpath "/etc/v2ray-agent/tls/${tlsDomain}.crt" --keypath "/etc/v2ray-agent/tls/${tlsDomain}.key" --ecc >/dev/null fi elif [[ -d "$HOME/.acme.sh/${tlsDomain}_ecc" && -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.key" && -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.cer" ]]; then sudo "$HOME/.acme.sh/acme.sh" --installcert -d "${tlsDomain}" --fullchainpath "/etc/v2ray-agent/tls/${tlsDomain}.crt" --keypath "/etc/v2ray-agent/tls/${tlsDomain}.key" --ecc >/dev/null fi if [[ ! -f "/etc/v2ray-agent/tls/${tlsDomain}.crt" || ! -f "/etc/v2ray-agent/tls/${tlsDomain}.key" ]] || [[ -z $(cat "/etc/v2ray-agent/tls/${tlsDomain}.key") || -z $(cat "/etc/v2ray-agent/tls/${tlsDomain}.crt") ]]; then tail -n 10 /etc/v2ray-agent/tls/acme.log if [[ ${installTLSCount} == "1" ]]; then echoContent red " ---> TLS安装失败，请检查acme日志" exit 0 fi installTLSCount=1 echo echoContent red " ---> TLS安装失败，正在检查80、443端口是否开放" allowPort 80 allowPort 443 echoContent yellow " ---> 重新尝试安装TLS证书" if tail -n 10 /etc/v2ray-agent/tls/acme.log | grep -q "Could not validate email address as valid"; then echoContent red " ---> 邮箱无法通过SSL厂商验证，请重新输入" echo customSSLEmail "validate email" installTLS "$1" else installTLS "$1" fi fi echoContent green " ---> TLS生成成功" else echoContent yellow " ---> 未安装acme.sh" exit 0 fi } # 配置伪装博客 initNginxConfig() { echoContent skyBlue "\n进度 $1/${totalProgress} : 配置Nginx" cat <${nginxConfigPath}alone.conf server { listen 80; listen [::]:80; server_name ${domain}; root /usr/share/nginx/html; location ~ /.well-known {allow all;} location /test {return 200 'fjkvymb6len';} } EOF } # 自定义/随机路径 randomPathFunction() { echoContent skyBlue "\n进度 $1/${totalProgress} : 生成随机路径" if [[ -n "${currentPath}" ]]; then echo read -r -p "读取到上次安装记录，是否使用上次安装时的path路径 ？[y/n]:" historyPathStatus echo fi if [[ "${historyPathStatus}" == "y" ]]; then customPath=${currentPath} echoContent green " ---> 使用成功\n" else echoContent yellow "请输入自定义路径[例: alone]，不需要斜杠，[回车]随机路径" read -r -p '路径:' customPath if [[ -z "${customPath}" ]]; then customPath=$(head -n 50 /dev/urandom | sed 's/[^a-z]//g' | strings -n 4 | tr '[:upper:]' '[:lower:]' | head -1) currentPath=${customPath:0:4} customPath=${currentPath} else currentPath=${customPath} fi fi echoContent yellow "\n path:${currentPath}" echoContent skyBlue "\n----------------------------" } # Nginx伪装博客 nginxBlog() { echoContent skyBlue "\n进度 $1/${totalProgress} : 添加伪装站点" if [[ -d "/usr/share/nginx/html" && -f "/usr/share/nginx/html/check" ]]; then echo read -r -p "检测到安装伪装站点，是否需要重新安装[y/n]:" nginxBlogInstallStatus if [[ "${nginxBlogInstallStatus}" == "y" ]]; then rm -rf /usr/share/nginx/html randomNum=$((RANDOM % 6 + 1)) wget -q -P /usr/share/nginx https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html${randomNum}.zip >/dev/null unzip -o /usr/share/nginx/html${randomNum}.zip -d /usr/share/nginx/html >/dev/null rm -f /usr/share/nginx/html${randomNum}.zip* echoContent green " ---> 添加伪装站点成功" fi else randomNum=$((RANDOM % 6 + 1)) rm -rf /usr/share/nginx/html wget -q -P /usr/share/nginx https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html${randomNum}.zip >/dev/null unzip -o /usr/share/nginx/html${randomNum}.zip -d /usr/share/nginx/html >/dev/null rm -f /usr/share/nginx/html${randomNum}.zip* echoContent green " ---> 添加伪装站点成功" fi } # 修改http_port_t端口 updateSELinuxHTTPPortT() { $(find /usr/bin /usr/sbin | grep -w journalctl) -xe >/etc/v2ray-agent/nginx_error.log 2>&1 if find /usr/bin /usr/sbin | grep -q -w semanage && find /usr/bin /usr/sbin | grep -q -w getenforce && grep -E "31300|31302" 检查SELinux端口是否开放" if ! $(find /usr/bin /usr/sbin | grep -w semanage) port -l | grep http_port | grep -q 31300; then $(find /usr/bin /usr/sbin | grep -w semanage) port -a -t http_port_t -p tcp 31300 echoContent green " ---> http_port_t 31300 端口开放成功" fi if ! $(find /usr/bin /usr/sbin | grep -w semanage) port -l | grep http_port | grep -q 31302; then $(find /usr/bin /usr/sbin | grep -w semanage) port -a -t http_port_t -p tcp 31302 echoContent green " ---> http_port_t 31302 端口开放成功" fi handleNginx start else exit 0 fi } # 操作Nginx handleNginx() { if [[ -z $(pgrep -f "nginx") ]] && [[ "$1" == "start" ]]; then systemctl start nginx 2>/etc/v2ray-agent/nginx_error.log sleep 0.5 if [[ -z $(pgrep -f nginx) ]]; then echoContent red " ---> Nginx启动失败" echoContent red " ---> 请手动尝试安装nginx后，再次执行脚本" if grep -q "journalctl -xe" Nginx启动成功" fi elif [[ -n $(pgrep -f "nginx") ]] && [[ "$1" == "stop" ]]; then systemctl stop nginx sleep 0.5 if [[ -n $(pgrep -f "nginx") ]]; then pgrep -f "nginx" | xargs kill -9 fi echoContent green " ---> Nginx关闭成功" fi } # 定时任务更新tls证书 installCronTLS() { echoContent skyBlue "\n进度 $1/${totalProgress} : 添加定时维护证书" crontab -l >/etc/v2ray-agent/backup_crontab.cron local historyCrontab historyCrontab=$(sed '/v2ray-agent/d;/acme.sh/d' /etc/v2ray-agent/backup_crontab.cron) echo "${historyCrontab}" >/etc/v2ray-agent/backup_crontab.cron echo "30 1 * * * /bin/bash /etc/v2ray-agent/install.sh RenewTLS >> /etc/v2ray-agent/crontab_tls.log 2>&1" >>/etc/v2ray-agent/backup_crontab.cron crontab /etc/v2ray-agent/backup_crontab.cron echoContent green "\n ---> 添加定时维护证书成功" } # 更新证书 renewalTLS() { if [[ -n $1 ]]; then echoContent skyBlue "\n进度 $1/1 : 更新证书" fi readAcmeTLS local domain=${currentHost} if [[ -z "${currentHost}" && -n "${tlsDomain}" ]]; then domain=${tlsDomain} fi if [[ -f "/etc/v2ray-agent/tls/ssl_type" ]]; then if grep -q "buypass" <"/etc/v2ray-agent/tls/ssl_type"; then sslRenewalDays=180 fi fi if [[ -d "$HOME/.acme.sh/${domain}_ecc" && -f "$HOME/.acme.sh/${domain}_ecc/${domain}.key" && -f "$HOME/.acme.sh/${domain}_ecc/${domain}.cer" ]] || [[ "${installDNSACMEStatus}" == "true" ]]; then modifyTime= if [[ "${installDNSACMEStatus}" == "true" ]]; then modifyTime=$(stat "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc/*.${dnsTLSDomain}.cer" | sed -n '7,6p' | awk '{print $2" "$3" "$4" "$5}') else modifyTime=$(stat "$HOME/.acme.sh/${domain}_ecc/${domain}.cer" | sed -n '7,6p' | awk '{print $2" "$3" "$4" "$5}') fi modifyTime=$(date +%s -d "${modifyTime}") currentTime=$(date +%s) ((stampDiff = currentTime - modifyTime)) ((days = stampDiff / 86400)) ((remainingDays = sslRenewalDays - days)) tlsStatus=${remainingDays} if [[ ${remainingDays} -le 0 ]]; then tlsStatus="已过期" fi echoContent skyBlue " ---> 证书检查日期:$(date "+%F %H:%M:%S")" echoContent skyBlue " ---> 证书生成日期:$(date -d @"${modifyTime}" +"%F %H:%M:%S")" echoContent skyBlue " ---> 证书生成天数:${days}" echoContent skyBlue " ---> 证书剩余天数:"${tlsStatus} echoContent skyBlue " ---> 证书过期前最后一天自动更新，如更新失败请手动更新" if [[ ${remainingDays} -le 1 ]]; then echoContent yellow " ---> 重新生成证书" handleNginx stop sudo "$HOME/.acme.sh/acme.sh" --cron --home "$HOME/.acme.sh" sudo "$HOME/.acme.sh/acme.sh" --installcert -d "${domain}" --fullchainpath /etc/v2ray-agent/tls/"${domain}.crt" --keypath /etc/v2ray-agent/tls/"${domain}.key" --ecc reloadCore handleNginx start else echoContent green " ---> 证书有效" fi else echoContent red " ---> 未安装" fi } # 查看TLS证书的状态 checkTLStatus() { if [[ -d "$HOME/.acme.sh/${currentHost}_ecc" ]] && [[ -f "$HOME/.acme.sh/${currentHost}_ecc/${currentHost}.key" ]] && [[ -f "$HOME/.acme.sh/${currentHost}_ecc/${currentHost}.cer" ]]; then modifyTime=$(stat "$HOME/.acme.sh/${currentHost}_ecc/${currentHost}.cer" | sed -n '7,6p' | awk '{print $2" "$3" "$4" "$5}') modifyTime=$(date +%s -d "${modifyTime}") currentTime=$(date +%s) ((stampDiff = currentTime - modifyTime)) ((days = stampDiff / 86400)) ((remainingDays = sslRenewalDays - days)) tlsStatus=${remainingDays} if [[ ${remainingDays} -le 0 ]]; then tlsStatus="已过期" fi echoContent skyBlue " ---> 证书生成日期:$(date -d "@${modifyTime}" +"%F %H:%M:%S")" echoContent skyBlue " ---> 证书生成天数:${days}" echoContent skyBlue " ---> 证书剩余天数:${tlsStatus}" fi } # 安装V2Ray、指定版本 installV2Ray() { readInstallType echoContent skyBlue "\n进度 $1/${totalProgress} : 安装V2Ray" if [[ "${coreInstallType}" != "2" && "${coreInstallType}" != "3" ]]; then if [[ "${selectCoreType}" == "2" ]]; then version=$(curl -s https://api.github.com/repos/v2fly/v2ray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | grep -v 'v5' | head -1) else version=${v2rayCoreVersion} fi echoContent green " ---> v2ray-core版本:${version}" if wget --help | grep -q show-progress; then wget -c -q --show-progress -P /etc/v2ray-agent/v2ray/ "https://github.com/v2fly/v2ray-core/releases/download/${version}/${v2rayCoreCPUVendor}.zip" else wget -c -P /etc/v2ray-agent/v2ray/ "https://github.com/v2fly/v2ray-core/releases/download/${version}/${v2rayCoreCPUVendor}.zip" >/dev/null 2>&1 fi unzip -o "/etc/v2ray-agent/v2ray/${v2rayCoreCPUVendor}.zip" -d /etc/v2ray-agent/v2ray >/dev/null rm -rf "/etc/v2ray-agent/v2ray/${v2rayCoreCPUVendor}.zip" else if [[ "${selectCoreType}" == "3" ]]; then echoContent green " ---> 锁定v2ray-core版本为v4.32.1" rm -f /etc/v2ray-agent/v2ray/v2ray rm -f /etc/v2ray-agent/v2ray/v2ctl installV2Ray "$1" else echoContent green " ---> v2ray-core版本:$(/etc/v2ray-agent/v2ray/v2ray --version | awk '{print $2}' | head -1)" read -r -p "是否更新、升级？[y/n]:" reInstallV2RayStatus if [[ "${reInstallV2RayStatus}" == "y" ]]; then rm -f /etc/v2ray-agent/v2ray/v2ray rm -f /etc/v2ray-agent/v2ray/v2ctl installV2Ray "$1" fi fi fi } # 安装 hysteria installHysteria() { readInstallType echoContent skyBlue "\n进度 $1/${totalProgress} : 安装Hysteria" if [[ -z "${hysteriaConfigPath}" ]]; then version=$(curl -s https://api.github.com/repos/apernet/hysteria/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | head -1) echoContent green " ---> Hysteria版本:${version}" if wget --help | grep -q show-progress; then wget -c -q --show-progress -P /etc/v2ray-agent/hysteria/ "https://github.com/apernet/hysteria/releases/download/${version}/${hysteriaCoreCPUVendor}" else wget -c -P /etc/v2ray-agent/hysteria/ "https://github.com/apernet/hysteria/releases/download/${version}/${hysteriaCoreCPUVendor}" >/dev/null 2>&1 fi mv "/etc/v2ray-agent/hysteria/${hysteriaCoreCPUVendor}" /etc/v2ray-agent/hysteria/hysteria chmod 655 /etc/v2ray-agent/hysteria/hysteria else echoContent green " ---> Hysteria版本:$(/etc/v2ray-agent/hysteria/hysteria --version | awk '{print $3}')" read -r -p "是否更新、升级？[y/n]:" reInstallHysteriaStatus if [[ "${reInstallHysteriaStatus}" == "y" ]]; then rm -f /etc/v2ray-agent/hysteria/hysteria installHysteria "$1" fi fi } # 安装xray installXray() { readInstallType echoContent skyBlue "\n进度 $1/${totalProgress} : 安装Xray" if [[ "${coreInstallType}" != "1" ]]; then version=$(curl -s https://api.github.com/repos/XTLS/Xray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | head -1) echoContent green " ---> Xray-core版本:${version}" if wget --help | grep -q show-progress; then wget -c -q --show-progress -P /etc/v2ray-agent/xray/ "https://github.com/XTLS/Xray-core/releases/download/${version}/${xrayCoreCPUVendor}.zip" else wget -c -P /etc/v2ray-agent/xray/ "https://github.com/XTLS/Xray-core/releases/download/${version}/${xrayCoreCPUVendor}.zip" >/dev/null 2>&1 fi unzip -o "/etc/v2ray-agent/xray/${xrayCoreCPUVendor}.zip" -d /etc/v2ray-agent/xray >/dev/null rm -rf "/etc/v2ray-agent/xray/${xrayCoreCPUVendor}.zip" chmod 655 /etc/v2ray-agent/xray/xray else echoContent green " ---> Xray-core版本:$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)" read -r -p "是否更新、升级？[y/n]:" reInstallXrayStatus if [[ "${reInstallXrayStatus}" == "y" ]]; then rm -f /etc/v2ray-agent/xray/xray installXray "$1" fi fi } # v2ray版本管理 v2rayVersionManageMenu() { echoContent skyBlue "\n进度 $1/${totalProgress} : V2Ray版本管理" if [[ ! -d "/etc/v2ray-agent/v2ray/" ]]; then echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容" menu exit 0 fi echoContent red "\n==============================================================" echoContent yellow "1.升级v2ray-core" echoContent yellow "2.回退v2ray-core" echoContent yellow "3.关闭v2ray-core" echoContent yellow "4.打开v2ray-core" echoContent yellow "5.重启v2ray-core" echoContent red "==============================================================" read -r -p "请选择:" selectV2RayType if [[ "${selectV2RayType}" == "1" ]]; then updateV2Ray elif [[ "${selectV2RayType}" == "2" ]]; then echoContent yellow "\n1.只可以回退最近的五个版本" echoContent yellow "2.不保证回退后一定可以正常使用" echoContent yellow "3.如果回退的版本不支持当前的config，则会无法连接，谨慎操作" echoContent skyBlue "------------------------Version-------------------------------" curl -s https://api.github.com/repos/v2fly/v2ray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | grep -v 'v5' | head -5 | awk '{print ""NR""":"$0}' echoContent skyBlue "--------------------------------------------------------------" read -r -p "请输入要回退的版本:" selectV2rayVersionType version=$(curl -s https://api.github.com/repos/v2fly/v2ray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | grep -v 'v5' | head -5 | awk '{print ""NR""":"$0}' | grep "${selectV2rayVersionType}:" | awk -F "[:]" '{print $2}') if [[ -n "${version}" ]]; then updateV2Ray "${version}" else echoContent red "\n ---> 输入有误，请重新输入" v2rayVersionManageMenu 1 fi elif [[ "${selectV2RayType}" == "3" ]]; then handleV2Ray stop elif [[ "${selectV2RayType}" == "4" ]]; then handleV2Ray start elif [[ "${selectV2RayType}" == "5" ]]; then reloadCore fi } # xray版本管理 xrayVersionManageMenu() { echoContent skyBlue "\n进度 $1/${totalProgress} : Xray版本管理" if [[ ! -d "/etc/v2ray-agent/xray/" ]]; then echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容" menu exit 0 fi echoContent red "\n==============================================================" echoContent yellow "1.升级Xray-core" echoContent yellow "2.升级Xray-core 预览版" echoContent yellow "3.回退Xray-core" echoContent yellow "4.关闭Xray-core" echoContent yellow "5.打开Xray-core" echoContent yellow "6.重启Xray-core" echoContent red "==============================================================" read -r -p "请选择:" selectXrayType if [[ "${selectXrayType}" == "1" ]]; then updateXray elif [[ "${selectXrayType}" == "2" ]]; then prereleaseStatus=true updateXray elif [[ "${selectXrayType}" == "3" ]]; then echoContent yellow "\n1.只可以回退最近的五个版本" echoContent yellow "2.不保证回退后一定可以正常使用" echoContent yellow "3.如果回退的版本不支持当前的config，则会无法连接，谨慎操作" echoContent skyBlue "------------------------Version-------------------------------" curl -s https://api.github.com/repos/XTLS/Xray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | head -5 | awk '{print ""NR""":"$0}' echoContent skyBlue "--------------------------------------------------------------" read -r -p "请输入要回退的版本:" selectXrayVersionType version=$(curl -s https://api.github.com/repos/XTLS/Xray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | head -5 | awk '{print ""NR""":"$0}' | grep "${selectXrayVersionType}:" | awk -F "[:]" '{print $2}') if [[ -n "${version}" ]]; then updateXray "${version}" else echoContent red "\n ---> 输入有误，请重新输入" xrayVersionManageMenu 1 fi elif [[ "${selectXrayType}" == "4" ]]; then handleXray stop elif [[ "${selectXrayType}" == "5" ]]; then handleXray start elif [[ "${selectXrayType}" == "6" ]]; then reloadCore fi } # 更新V2Ray updateV2Ray() { readInstallType if [[ -z "${coreInstallType}" ]]; then if [[ -n "$1" ]]; then version=$1 else version=$(curl -s https://api.github.com/repos/v2fly/v2ray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | grep -v 'v5' | head -1) fi # 使用锁定的版本 if [[ -n "${v2rayCoreVersion}" ]]; then version=${v2rayCoreVersion} fi echoContent green " ---> v2ray-core版本:${version}" if wget --help | grep -q show-progress; then wget -c -q --show-progress -P /etc/v2ray-agent/v2ray/ "https://github.com/v2fly/v2ray-core/releases/download/${version}/${v2rayCoreCPUVendor}.zip" else wget -c -P "/etc/v2ray-agent/v2ray/ https://github.com/v2fly/v2ray-core/releases/download/${version}/${v2rayCoreCPUVendor}.zip" >/dev/null 2>&1 fi unzip -o "/etc/v2ray-agent/v2ray/${v2rayCoreCPUVendor}.zip" -d /etc/v2ray-agent/v2ray >/dev/null rm -rf "/etc/v2ray-agent/v2ray/${v2rayCoreCPUVendor}.zip" handleV2Ray stop handleV2Ray start else echoContent green " ---> 当前v2ray-core版本:$(/etc/v2ray-agent/v2ray/v2ray --version | awk '{print $2}' | head -1)" if [[ -n "$1" ]]; then version=$1 else version=$(curl -s https://api.github.com/repos/v2fly/v2ray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | grep -v 'v5' | head -1) fi if [[ -n "${v2rayCoreVersion}" ]]; then version=${v2rayCoreVersion} fi if [[ -n "$1" ]]; then read -r -p "回退版本为${version}，是否继续？[y/n]:" rollbackV2RayStatus if [[ "${rollbackV2RayStatus}" == "y" ]]; then if [[ "${coreInstallType}" == "2" ]]; then echoContent green " ---> 当前v2ray-core版本:$(/etc/v2ray-agent/v2ray/v2ray --version | awk '{print $2}' | head -1)" elif [[ "${coreInstallType}" == "1" ]]; then echoContent green " ---> 当前Xray-core版本:$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)" fi handleV2Ray stop rm -f /etc/v2ray-agent/v2ray/v2ray rm -f /etc/v2ray-agent/v2ray/v2ctl updateV2Ray "${version}" else echoContent green " ---> 放弃回退版本" fi elif [[ "${version}" == "v$(/etc/v2ray-agent/v2ray/v2ray --version | awk '{print $2}' | head -1)" ]]; then read -r -p "当前版本与最新版相同，是否重新安装？[y/n]:" reInstallV2RayStatus if [[ "${reInstallV2RayStatus}" == "y" ]]; then handleV2Ray stop rm -f /etc/v2ray-agent/v2ray/v2ray rm -f /etc/v2ray-agent/v2ray/v2ctl updateV2Ray else echoContent green " ---> 放弃重新安装" fi else read -r -p "最新版本为:${version}，是否更新？[y/n]:" installV2RayStatus if [[ "${installV2RayStatus}" == "y" ]]; then rm -f /etc/v2ray-agent/v2ray/v2ray rm -f /etc/v2ray-agent/v2ray/v2ctl updateV2Ray else echoContent green " ---> 放弃更新" fi fi fi } # 更新Xray updateXray() { readInstallType if [[ -z "${coreInstallType}" ]]; then if [[ -n "$1" ]]; then version=$1 else version=$(curl -s https://api.github.com/repos/XTLS/Xray-core/releases | jq -r ".[]|select (.prerelease==${prereleaseStatus})|.tag_name" | head -1) fi echoContent green " ---> Xray-core版本:${version}" if wget --help | grep -q show-progress; then wget -c -q --show-progress -P /etc/v2ray-agent/xray/ "https://github.com/XTLS/Xray-core/releases/download/${version}/${xrayCoreCPUVendor}.zip" else wget -c -P /etc/v2ray-agent/xray/ "https://github.com/XTLS/Xray-core/releases/download/${version}/${xrayCoreCPUVendor}.zip" >/dev/null 2>&1 fi unzip -o "/etc/v2ray-agent/xray/${xrayCoreCPUVendor}.zip" -d /etc/v2ray-agent/xray >/dev/null rm -rf "/etc/v2ray-agent/xray/${xrayCoreCPUVendor}.zip" chmod 655 /etc/v2ray-agent/xray/xray handleXray stop handleXray start else echoContent green " ---> 当前Xray-core版本:$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)" if [[ -n "$1" ]]; then version=$1 else version=$(curl -s https://api.github.com/repos/XTLS/Xray-core/releases | jq -r ".[]|select (.prerelease==${prereleaseStatus})|.tag_name" | head -1) fi if [[ -n "$1" ]]; then read -r -p "回退版本为${version}，是否继续？[y/n]:" rollbackXrayStatus if [[ "${rollbackXrayStatus}" == "y" ]]; then echoContent green " ---> 当前Xray-core版本:$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)" handleXray stop rm -f /etc/v2ray-agent/xray/xray updateXray "${version}" else echoContent green " ---> 放弃回退版本" fi elif [[ "${version}" == "v$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)" ]]; then read -r -p "当前版本与最新版相同，是否重新安装？[y/n]:" reInstallXrayStatus if [[ "${reInstallXrayStatus}" == "y" ]]; then handleXray stop rm -f /etc/v2ray-agent/xray/xray rm -f /etc/v2ray-agent/xray/xray updateXray else echoContent green " ---> 放弃重新安装" fi else read -r -p "最新版本为:${version}，是否更新？[y/n]:" installXrayStatus if [[ "${installXrayStatus}" == "y" ]]; then rm -f /etc/v2ray-agent/xray/xray updateXray else echoContent green " ---> 放弃更新" fi fi fi } # 验证整个服务是否可用 checkGFWStatue() { readInstallType echoContent skyBlue "\n进度 $1/${totalProgress} : 验证服务启动状态" if [[ "${coreInstallType}" == "1" ]] && [[ -n $(pgrep -f xray/xray) ]]; then echoContent green " ---> 服务启动成功" elif [[ "${coreInstallType}" == "2" ]] && [[ -n $(pgrep -f v2ray/v2ray) ]]; then echoContent green " ---> 服务启动成功" else echoContent red " ---> 服务启动失败，请检查终端是否有日志打印" exit 0 fi } # V2Ray开机自启 installV2RayService() { echoContent skyBlue "\n进度 $1/${totalProgress} : 配置V2Ray开机自启" if [[ -n $(find /bin /usr/bin -name "systemctl") ]]; then rm -rf /etc/systemd/system/v2ray.service touch /etc/systemd/system/v2ray.service execStart='/etc/v2ray-agent/v2ray/v2ray -confdir /etc/v2ray-agent/v2ray/conf' cat </etc/systemd/system/v2ray.service [Unit] Description=V2Ray - A unified platform for anti-censorship Documentation=https://v2ray.com https://guide.v2fly.org After=network.target nss-lookup.target Wants=network-online.target [Service] Type=simple User=root CapabilityBoundingSet=CAP_NET_BIND_SERVICE CAP_NET_RAW NoNewPrivileges=yes ExecStart=${execStart} Restart=on-failure RestartPreventExitStatus=23 LimitNPROC=10000 LimitNOFILE=1000000 [Install] WantedBy=multi-user.target EOF systemctl daemon-reload systemctl enable v2ray.service echoContent green " ---> 配置V2Ray开机自启成功" fi } # 安装hysteria开机自启 installHysteriaService() { echoContent skyBlue "\n进度 $1/${totalProgress} : 配置Hysteria开机自启" if [[ -n $(find /bin /usr/bin -name "systemctl") ]]; then rm -rf /etc/systemd/system/hysteria.service touch /etc/systemd/system/hysteria.service execStart='/etc/v2ray-agent/hysteria/hysteria --log-level info -c /etc/v2ray-agent/hysteria/conf/config.json server' cat </etc/systemd/system/hysteria.service [Unit] Description=Hysteria Service Documentation=https://github.com/apernet/hysteria/wiki After=network.target nss-lookup.target Wants=network-online.target [Service] Type=simple User=root CapabilityBoundingSet=CAP_NET_BIND_SERVICE CAP_NET_RAW NoNewPrivileges=yes ExecStart=${execStart} Restart=on-failure RestartPreventExitStatus=23 LimitNPROC=10000 LimitNOFILE=1000000 [Install] WantedBy=multi-user.target EOF systemctl daemon-reload systemctl enable hysteria.service echoContent green " ---> 配置Hysteria开机自启成功" fi } # Xray开机自启 installXrayService() { echoContent skyBlue "\n进度 $1/${totalProgress} : 配置Xray开机自启" if [[ -n $(find /bin /usr/bin -name "systemctl") ]]; then rm -rf /etc/systemd/system/xray.service touch /etc/systemd/system/xray.service execStart='/etc/v2ray-agent/xray/xray run -confdir /etc/v2ray-agent/xray/conf' cat </etc/systemd/system/xray.service [Unit] Description=Xray Service Documentation=https://github.com/XTLS/Xray-core After=network.target nss-lookup.target Wants=network-online.target [Service] Type=simple User=root CapabilityBoundingSet=CAP_NET_BIND_SERVICE CAP_NET_RAW NoNewPrivileges=yes ExecStart=${execStart} Restart=on-failure RestartPreventExitStatus=23 LimitNPROC=10000 LimitNOFILE=1000000 [Install] WantedBy=multi-user.target EOF systemctl daemon-reload systemctl enable xray.service echoContent green " ---> 配置Xray开机自启成功" fi } # 操作V2Ray handleV2Ray() { # shellcheck disable=SC2010 if find /bin /usr/bin | grep -q systemctl && ls /etc/systemd/system/ | grep -q v2ray.service; then if [[ -z $(pgrep -f "v2ray/v2ray") ]] && [[ "$1" == "start" ]]; then systemctl start v2ray.service elif [[ -n $(pgrep -f "v2ray/v2ray") ]] && [[ "$1" == "stop" ]]; then systemctl stop v2ray.service fi fi sleep 0.8 if [[ "$1" == "start" ]]; then if [[ -n $(pgrep -f "v2ray/v2ray") ]]; then echoContent green " ---> V2Ray启动成功" else echoContent red "V2Ray启动失败" echoContent red "请手动执行【/etc/v2ray-agent/v2ray/v2ray -confdir /etc/v2ray-agent/v2ray/conf】，查看错误日志" exit 0 fi elif [[ "$1" == "stop" ]]; then if [[ -z $(pgrep -f "v2ray/v2ray") ]]; then echoContent green " ---> V2Ray关闭成功" else echoContent red "V2Ray关闭失败" echoContent red "请手动执行【ps -ef|grep -v grep|grep v2ray|awk '{print \$2}'|xargs kill -9】" exit 0 fi fi } # 操作Hysteria handleHysteria() { # shellcheck disable=SC2010 if find /bin /usr/bin | grep -q systemctl && ls /etc/systemd/system/ | grep -q hysteria.service; then if [[ -z $(pgrep -f "hysteria/hysteria") ]] && [[ "$1" == "start" ]]; then systemctl start hysteria.service elif [[ -n $(pgrep -f "hysteria/hysteria") ]] && [[ "$1" == "stop" ]]; then systemctl stop hysteria.service fi fi sleep 0.8 if [[ "$1" == "start" ]]; then if [[ -n $(pgrep -f "hysteria/hysteria") ]]; then echoContent green " ---> Hysteria启动成功" else echoContent red "Hysteria启动失败" echoContent red "请手动执行【/etc/v2ray-agent/hysteria/hysteria --log-level debug -c /etc/v2ray-agent/hysteria/conf/config.json server】，查看错误日志" exit 0 fi elif [[ "$1" == "stop" ]]; then if [[ -z $(pgrep -f "hysteria/hysteria") ]]; then echoContent green " ---> Hysteria关闭成功" else echoContent red "Hysteria关闭失败" echoContent red "请手动执行【ps -ef|grep -v grep|grep hysteria|awk '{print \$2}'|xargs kill -9】" exit 0 fi fi } # 操作xray handleXray() { if [[ -n $(find /bin /usr/bin -name "systemctl") ]] && [[ -n $(find /etc/systemd/system/ -name "xray.service") ]]; then if [[ -z $(pgrep -f "xray/xray") ]] && [[ "$1" == "start" ]]; then systemctl start xray.service elif [[ -n $(pgrep -f "xray/xray") ]] && [[ "$1" == "stop" ]]; then systemctl stop xray.service fi fi sleep 0.8 if [[ "$1" == "start" ]]; then if [[ -n $(pgrep -f "xray/xray") ]]; then echoContent green " ---> Xray启动成功" else echoContent red "Xray启动失败" echoContent red "请手动执行【/etc/v2ray-agent/xray/xray -confdir /etc/v2ray-agent/xray/conf】，查看错误日志" exit 0 fi elif [[ "$1" == "stop" ]]; then if [[ -z $(pgrep -f "xray/xray") ]]; then echoContent green " ---> Xray关闭成功" else echoContent red "xray关闭失败" echoContent red "请手动执行【ps -ef|grep -v grep|grep xray|awk '{print \$2}'|xargs kill -9】" exit 0 fi fi } # 获取clients配置 getClients() { local path=$1 local addClientsStatus=$2 previousClients= if [[ ${addClientsStatus} == "true" ]]; then if [[ ! -f "${path}" ]]; then echo local protocol protocol=$(echo "${path}" | awk -F "[_]" '{print $2 $3}') echoContent yellow "没有读取到此协议[${protocol}]上一次安装的配置文件，采用配置文件的第一个uuid" else previousClients=$(jq -r ".inbounds[0].settings.clients" "${path}") fi fi } # 添加client配置 addClients() { local path=$1 local addClientsStatus=$2 if [[ ${addClientsStatus} == "true" && -n "${previousClients}" ]]; then config=$(jq -r ".inbounds[0].settings.clients = ${previousClients}" "${path}") echo "${config}" | jq . >"${path}" fi } # 添加hysteria配置 addClientsHysteria() { local path=$1 local addClientsStatus=$2 if [[ ${addClientsStatus} == "true" && -n "${previousClients}" ]]; then local uuids= uuids=$(echo "${previousClients}" | jq -r [.[].id]) if [[ "${frontingType}" == "02_trojan_TCP_inbounds" ]]; then uuids=$(echo "${previousClients}" | jq -r [.[].password]) fi config=$(jq -r ".auth.config = ${uuids}" "${path}") echo "${config}" | jq . >"${path}" fi } # 初始化hysteria端口 initHysteriaPort() { readHysteriaConfig if [[ -n "${hysteriaPort}" ]]; then read -r -p "读取到上次安装时的端口，是否使用上次安装时的端口 ？[y/n]:" historyHysteriaPortStatus if [[ "${historyHysteriaPortStatus}" == "y" ]]; then echoContent yellow "\n ---> 端口: ${hysteriaPort}" else hysteriaPort= fi fi if [[ -z "${hysteriaPort}" ]]; then echoContent yellow "请输入Hysteria端口[例: 10000]，不可与其他服务重复" read -r -p "端口:" hysteriaPort fi if [[ -z ${hysteriaPort} ]]; then echoContent red " ---> 端口不可为空" initHysteriaPort "$2" elif ((hysteriaPort < 1 || hysteriaPort > 65535)); then echoContent red " ---> 端口不合法" initHysteriaPort "$2" fi allowPort "${hysteriaPort}" } # 初始化hysteria的协议 initHysteriaProtocol() { echoContent skyBlue "\n请选择协议类型" echoContent red "==============================================================" echoContent yellow "1.udp(QUIC)(默认)" echoContent yellow "2.faketcp" echoContent yellow "3.wechat-video" echoContent red "==============================================================" read -r -p "请选择:" selectHysteriaProtocol case ${selectHysteriaProtocol} in 1) hysteriaProtocol="udp" ;; 2) hysteriaProtocol="faketcp" ;; 3) hysteriaProtocol="wechat-video" ;; *) hysteriaProtocol="udp" ;; esac echoContent yellow "\n ---> 协议: ${hysteriaProtocol}\n" } # 初始化hysteria网络信息 initHysteriaNetwork() { echoContent yellow "请输入本地到服务器的平均延迟，请按照真实情况填写（默认：180，单位：ms）" read -r -p "延迟:" hysteriaLag if [[ -z "${hysteriaLag}" ]]; then hysteriaLag=180 echoContent yellow "\n ---> 延迟: ${hysteriaLag}\n" fi echoContent yellow "请输入本地带宽峰值的下行速度（默认：100，单位：Mbps）" read -r -p "下行速度:" hysteriaClientDownloadSpeed if [[ -z "${hysteriaClientDownloadSpeed}" ]]; then hysteriaClientDownloadSpeed=100 echoContent yellow "\n ---> 下行速度: ${hysteriaClientDownloadSpeed}\n" fi echoContent yellow "请输入本地带宽峰值的上行速度（默认：50，单位：Mbps）" read -r -p "上行速度:" hysteriaClientUploadSpeed if [[ -z "${hysteriaClientUploadSpeed}" ]]; then hysteriaClientUploadSpeed=50 echoContent yellow "\n ---> 上行速度: ${hysteriaClientUploadSpeed}\n" fi cat </etc/v2ray-agent/hysteria/conf/client_network.json { "hysteriaLag":"${hysteriaLag}", "hysteriaClientUploadSpeed":"${hysteriaClientUploadSpeed}", "hysteriaClientDownloadSpeed":"${hysteriaClientDownloadSpeed}" } EOF } # 初始化Hysteria配置 initHysteriaConfig() { echoContent skyBlue "\n进度 $1/${totalProgress} : 初始化Hysteria配置" initHysteriaPort initHysteriaProtocol initHysteriaNetwork getClients "${configPath}${frontingType}.json" true cat </etc/v2ray-agent/hysteria/conf/config.json { "listen": ":${hysteriaPort}", "protocol": "${hysteriaProtocol}", "disable_udp": false, "cert": "/etc/v2ray-agent/tls/${currentHost}.crt", "key": "/etc/v2ray-agent/tls/${currentHost}.key", "auth": { "mode": "passwords", "config": [] }, "alpn": "h3", "recv_window_conn": 15728640, "recv_window_client": 67108864, "max_conn_client": 4096, "disable_mtu_discovery": true, "resolve_preference": "46", "resolver": "https://8.8.8.8:443/dns-query" } EOF addClientsHysteria "/etc/v2ray-agent/hysteria/conf/config.json" true } # 初始化V2Ray 配置文件 initV2RayConfig() { echoContent skyBlue "\n进度 $2/${totalProgress} : 初始化V2Ray配置" echo read -r -p "是否自定义UUID ？[y/n]:" customUUIDStatus echo if [[ "${customUUIDStatus}" == "y" ]]; then read -r -p "请输入合法的UUID:" currentCustomUUID if [[ -n "${currentCustomUUID}" ]]; then uuid=${currentCustomUUID} fi fi local addClientsStatus= if [[ -n "${currentUUID}" && -z "${uuid}" ]]; then read -r -p "读取到上次安装记录，是否使用上次安装时的UUID ？[y/n]:" historyUUIDStatus if [[ "${historyUUIDStatus}" == "y" ]]; then uuid=${currentUUID} addClientsStatus=true else uuid=$(/etc/v2ray-agent/v2ray/v2ctl uuid) fi elif [[ -z "${uuid}" ]]; then uuid=$(/etc/v2ray-agent/v2ray/v2ctl uuid) fi if [[ -z "${uuid}" ]]; then addClientsStatus= echoContent red "\n ---> uuid读取错误，重新生成" uuid=$(/etc/v2ray-agent/v2ray/v2ctl uuid) fi movePreviousConfig # log cat </etc/v2ray-agent/v2ray/conf/00_log.json { "log": { "error": "/etc/v2ray-agent/v2ray/error.log", "loglevel": "warning" } } EOF # outbounds if [[ -n "${pingIPv6}" ]]; then cat </etc/v2ray-agent/v2ray/conf/10_ipv6_outbounds.json { "outbounds": [ { "protocol": "freedom", "settings": {}, "tag": "direct" } ] } EOF else cat </etc/v2ray-agent/v2ray/conf/10_ipv4_outbounds.json { "outbounds":[ { "protocol":"freedom", "settings":{ "domainStrategy":"UseIPv4" }, "tag":"IPv4-out" }, { "protocol":"freedom", "settings":{ "domainStrategy":"UseIPv6" }, "tag":"IPv6-out" }, { "protocol":"blackhole", "tag":"blackhole-out" } ] } EOF fi # dns cat </etc/v2ray-agent/v2ray/conf/11_dns.json { "dns": { "servers": [ "localhost" ] } } EOF # VLESS_TCP_TLS # 回落nginx local fallbacksList='{"dest":31300,"xver":0},{"alpn":"h2","dest":31302,"xver":0}' # trojan if echo "${selectCustomInstallType}" | grep -q 4 || [[ "$1" == "all" ]]; then fallbacksList='{"dest":31296,"xver":1},{"alpn":"h2","dest":31302,"xver":0}' getClients "${configPath}../tmp/04_trojan_TCP_inbounds.json" "${addClientsStatus}" cat </etc/v2ray-agent/v2ray/conf/04_trojan_TCP_inbounds.json { "inbounds":[ { "port": 31296, "listen": "127.0.0.1", "protocol": "trojan", "tag":"trojanTCP", "settings": { "clients": [ { "password": "${uuid}", "email": "${domain}_${uuid}" } ], "fallbacks":[ {"dest":"31300"} ] }, "streamSettings": { "network": "tcp", "security": "none", "tcpSettings": { "acceptProxyProtocol": true } } } ] } EOF addClients "/etc/v2ray-agent/v2ray/conf/04_trojan_TCP_inbounds.json" "${addClientsStatus}" fi # VLESS_WS_TLS if echo "${selectCustomInstallType}" | grep -q 1 || [[ "$1" == "all" ]]; then fallbacksList=${fallbacksList}',{"path":"/'${customPath}'ws","dest":31297,"xver":1}' getClients "${configPath}../tmp/03_VLESS_WS_inbounds.json" "${addClientsStatus}" cat </etc/v2ray-agent/v2ray/conf/03_VLESS_WS_inbounds.json { "inbounds":[ { "port": 31297, "listen": "127.0.0.1", "protocol": "vless", "tag":"VLESSWS", "settings": { "clients": [ { "id": "${uuid}", "email": "${domain}_${uuid}" } ], "decryption": "none" }, "streamSettings": { "network": "ws", "security": "none", "wsSettings": { "acceptProxyProtocol": true, "path": "/${customPath}ws" } } } ] } EOF addClients "/etc/v2ray-agent/v2ray/conf/03_VLESS_WS_inbounds.json" "${addClientsStatus}" fi # trojan_grpc if echo "${selectCustomInstallType}" | grep -q 2 || [[ "$1" == "all" ]]; then if ! echo "${selectCustomInstallType}" | grep -q 5 && [[ -n ${selectCustomInstallType} ]]; then fallbacksList=${fallbacksList//31302/31304} fi getClients "${configPath}../tmp/04_trojan_gRPC_inbounds.json" "${addClientsStatus}" cat </etc/v2ray-agent/v2ray/conf/04_trojan_gRPC_inbounds.json { "inbounds": [ { "port": 31304, "listen": "127.0.0.1", "protocol": "trojan", "tag": "trojangRPCTCP", "settings": { "clients": [ { "password": "${uuid}", "email": "${domain}_${uuid}" } ], "fallbacks": [ { "dest": "31300" } ] }, "streamSettings": { "network": "grpc", "grpcSettings": { "serviceName": "${customPath}trojangrpc" } } } ] } EOF addClients "/etc/v2ray-agent/v2ray/conf/04_trojan_gRPC_inbounds.json" "${addClientsStatus}" fi # VMess_WS if echo "${selectCustomInstallType}" | grep -q 3 || [[ "$1" == "all" ]]; then fallbacksList=${fallbacksList}',{"path":"/'${customPath}'vws","dest":31299,"xver":1}' getClients "${configPath}../tmp/05_VMess_WS_inbounds.json" "${addClientsStatus}" cat </etc/v2ray-agent/v2ray/conf/05_VMess_WS_inbounds.json { "inbounds":[ { "listen": "127.0.0.1", "port": 31299, "protocol": "vmess", "tag":"VMessWS", "settings": { "clients": [ { "id": "${uuid}", "alterId": 0, "add": "${add}", "email": "${domain}_${uuid}" } ] }, "streamSettings": { "network": "ws", "security": "none", "wsSettings": { "acceptProxyProtocol": true, "path": "/${customPath}vws" } } } ] } EOF addClients "/etc/v2ray-agent/v2ray/conf/05_VMess_WS_inbounds.json" "${addClientsStatus}" fi if echo "${selectCustomInstallType}" | grep -q 5 || [[ "$1" == "all" ]]; then getClients "${configPath}../tmp/06_VLESS_gRPC_inbounds.json" "${addClientsStatus}" cat </etc/v2ray-agent/v2ray/conf/06_VLESS_gRPC_inbounds.json { "inbounds":[ { "port": 31301, "listen": "127.0.0.1", "protocol": "vless", "tag":"VLESSGRPC", "settings": { "clients": [ { "id": "${uuid}", "add": "${add}", "email": "${domain}_${uuid}" } ], "decryption": "none" }, "streamSettings": { "network": "grpc", "grpcSettings": { "serviceName": "${customPath}grpc" } } } ] } EOF addClients "/etc/v2ray-agent/v2ray/conf/06_VLESS_gRPC_inbounds.json" "${addClientsStatus}" fi # VLESS_TCP getClients "${configPath}../tmp/02_VLESS_TCP_inbounds.json" "${addClientsStatus}" local defaultPort=443 if [[ -n "${customPort}" ]]; then defaultPort=${customPort} fi cat </etc/v2ray-agent/v2ray/conf/02_VLESS_TCP_inbounds.json { "inbounds":[ { "port": ${defaultPort}, "protocol": "vless", "tag":"VLESSTCP", "settings": { "clients": [ { "id": "${uuid}", "add":"${add}", "email": "${domain}_VLESS_TLS-direct_TCP" } ], "decryption": "none", "fallbacks": [ ${fallbacksList} ] }, "streamSettings": { "network": "tcp", "security": "tls", "tlsSettings": { "minVersion": "1.2", "alpn": [ "http/1.1", "h2" ], "certificates": [ { "certificateFile": "/etc/v2ray-agent/tls/${domain}.crt", "keyFile": "/etc/v2ray-agent/tls/${domain}.key", "ocspStapling": 3600, "usage":"encipherment" } ] } } } ] } EOF addClients "/etc/v2ray-agent/v2ray/conf/02_VLESS_TCP_inbounds.json" "${addClientsStatus}" } # 初始化Xray Trojan XTLS 配置文件 initXrayFrontingConfig() { echoContent red " ---> Trojan暂不支持 xtls-rprx-vision" exit 0; if [[ -z "${configPath}" ]]; then echoContent red " ---> 未安装，请使用脚本安装" menu exit 0 fi if [[ "${coreInstallType}" != "1" ]]; then echoContent red " ---> 未安装可用类型" fi local xtlsType= if echo ${currentInstallProtocolType} | grep -q trojan; then xtlsType=VLESS else xtlsType=Trojan fi echoContent skyBlue "\n功能 1/${totalProgress} : 前置切换为${xtlsType}" echoContent red "\n==============================================================" echoContent yellow "# 注意事项\n" echoContent yellow "会将前置替换为${xtlsType}" echoContent yellow "如果前置是Trojan，查看账号时则会出现两个Trojan协议的节点，有一个不可用xtls" echoContent yellow "再次执行可切换至上一次的前置\n" echoContent yellow "1.切换至${xtlsType}" echoContent red "==============================================================" read -r -p "请选择:" selectType if [[ "${selectType}" == "1" ]]; then if [[ "${xtlsType}" == "Trojan" ]]; then local VLESSConfig VLESSConfig=$(cat ${configPath}${frontingType}.json) VLESSConfig=${VLESSConfig//"id"/"password"} VLESSConfig=${VLESSConfig//VLESSTCP/TrojanTCPXTLS} VLESSConfig=${VLESSConfig//VLESS/Trojan} VLESSConfig=${VLESSConfig//"vless"/"trojan"} VLESSConfig=${VLESSConfig//"id"/"password"} echo "${VLESSConfig}" | jq . >${configPath}02_trojan_TCP_inbounds.json rm ${configPath}${frontingType}.json elif [[ "${xtlsType}" == "VLESS" ]]; then local VLESSConfig VLESSConfig=$(cat ${configPath}02_trojan_TCP_inbounds.json) VLESSConfig=${VLESSConfig//"password"/"id"} VLESSConfig=${VLESSConfig//TrojanTCPXTLS/VLESSTCP} VLESSConfig=${VLESSConfig//Trojan/VLESS} VLESSConfig=${VLESSConfig//"trojan"/"vless"} VLESSConfig=${VLESSConfig//"password"/"id"} echo "${VLESSConfig}" | jq . >${configPath}02_VLESS_TCP_inbounds.json rm ${configPath}02_trojan_TCP_inbounds.json fi reloadCore fi exit 0 } # 移动上次配置文件至临时文件 movePreviousConfig() { if [[ -n "${configPath}" ]] && [[ -f "${configPath}02_VLESS_TCP_inbounds.json" ]]; then rm -rf ${configPath}../tmp/* mv ${configPath}* ${configPath}../tmp/ fi } # 初始化Xray 配置文件 initXrayConfig() { echoContent skyBlue "\n进度 $2/${totalProgress} : 初始化Xray配置" echo local uuid= local addClientsStatus= if [[ -n "${currentUUID}" ]]; then read -r -p "读取到上次安装记录，是否使用上次安装时的UUID ？[y/n]:" historyUUIDStatus if [[ "${historyUUIDStatus}" == "y" ]]; then addClientsStatus=true uuid=${currentUUID} echoContent green "\n ---> 使用成功" fi fi if [[ -z "${uuid}" ]]; then echoContent yellow "请输入自定义UUID[需合法]，[回车]随机UUID" read -r -p 'UUID:' customUUID if [[ -n ${customUUID} ]]; then uuid=${customUUID} else uuid=$(/etc/v2ray-agent/xray/xray uuid) fi fi if [[ -z "${uuid}" ]]; then addClientsStatus= echoContent red "\n ---> uuid读取错误，重新生成" uuid=$(/etc/v2ray-agent/xray/xray uuid) fi echoContent yellow "\n ${uuid}" movePreviousConfig # log cat </etc/v2ray-agent/xray/conf/00_log.json { "log": { "error": "/etc/v2ray-agent/xray/error.log", "loglevel": "warning" } } EOF # outbounds if [[ -n "${pingIPv6}" ]]; then cat </etc/v2ray-agent/xray/conf/10_ipv6_outbounds.json { "outbounds": [ { "protocol": "freedom", "settings": {}, "tag": "direct" } ] } EOF else cat </etc/v2ray-agent/xray/conf/10_ipv4_outbounds.json { "outbounds":[ { "protocol":"freedom", "settings":{ "domainStrategy":"UseIPv4" }, "tag":"IPv4-out" }, { "protocol":"freedom", "settings":{ "domainStrategy":"UseIPv6" }, "tag":"IPv6-out" }, { "protocol":"blackhole", "tag":"blackhole-out" } ] } EOF fi # dns cat </etc/v2ray-agent/xray/conf/11_dns.json { "dns": { "servers": [ "localhost" ] } } EOF # VLESS_TCP_TLS/XTLS # 回落nginx local fallbacksList='{"dest":31300,"xver":0},{"alpn":"h2","dest":31302,"xver":0}' # trojan if echo "${selectCustomInstallType}" | grep -q 4 || [[ "$1" == "all" ]]; then fallbacksList='{"dest":31296,"xver":1},{"alpn":"h2","dest":31302,"xver":0}' getClients "${configPath}../tmp/04_trojan_TCP_inbounds.json" "${addClientsStatus}" cat </etc/v2ray-agent/xray/conf/04_trojan_TCP_inbounds.json { "inbounds":[ { "port": 31296, "listen": "127.0.0.1", "protocol": "trojan", "tag":"trojanTCP", "settings": { "clients": [ { "password": "${uuid}", "email": "${domain}_${uuid}" } ], "fallbacks":[ {"dest":"31300"} ] }, "streamSettings": { "network": "tcp", "security": "none", "tcpSettings": { "acceptProxyProtocol": true } } } ] } EOF addClients "/etc/v2ray-agent/xray/conf/04_trojan_TCP_inbounds.json" "${addClientsStatus}" fi # VLESS_WS_TLS if echo "${selectCustomInstallType}" | grep -q 1 || [[ "$1" == "all" ]]; then fallbacksList=${fallbacksList}',{"path":"/'${customPath}'ws","dest":31297,"xver":1}' getClients "${configPath}../tmp/03_VLESS_WS_inbounds.json" "${addClientsStatus}" cat </etc/v2ray-agent/xray/conf/03_VLESS_WS_inbounds.json { "inbounds":[ { "port": 31297, "listen": "127.0.0.1", "protocol": "vless", "tag":"VLESSWS", "settings": { "clients": [ { "id": "${uuid}", "email": "${domain}_${uuid}" } ], "decryption": "none" }, "streamSettings": { "network": "ws", "security": "none", "wsSettings": { "acceptProxyProtocol": true, "path": "/${customPath}ws" } } } ] } EOF addClients "/etc/v2ray-agent/xray/conf/03_VLESS_WS_inbounds.json" "${addClientsStatus}" fi # trojan_grpc if echo "${selectCustomInstallType}" | grep -q 2 || [[ "$1" == "all" ]]; then if ! echo "${selectCustomInstallType}" | grep -q 5 && [[ -n ${selectCustomInstallType} ]]; then fallbacksList=${fallbacksList//31302/31304} fi getClients "${configPath}../tmp/04_trojan_gRPC_inbounds.json" "${addClientsStatus}" cat </etc/v2ray-agent/xray/conf/04_trojan_gRPC_inbounds.json { "inbounds": [ { "port": 31304, "listen": "127.0.0.1", "protocol": "trojan", "tag": "trojangRPCTCP", "settings": { "clients": [ { "password": "${uuid}", "email": "${domain}_${uuid}" } ], "fallbacks": [ { "dest": "31300" } ] }, "streamSettings": { "network": "grpc", "grpcSettings": { "serviceName": "${customPath}trojangrpc" } } } ] } EOF addClients "/etc/v2ray-agent/xray/conf/04_trojan_gRPC_inbounds.json" "${addClientsStatus}" fi # VMess_WS if echo "${selectCustomInstallType}" | grep -q 3 || [[ "$1" == "all" ]]; then fallbacksList=${fallbacksList}',{"path":"/'${customPath}'vws","dest":31299,"xver":1}' getClients "${configPath}../tmp/05_VMess_WS_inbounds.json" "${addClientsStatus}" cat </etc/v2ray-agent/xray/conf/05_VMess_WS_inbounds.json { "inbounds":[ { "listen": "127.0.0.1", "port": 31299, "protocol": "vmess", "tag":"VMessWS", "settings": { "clients": [ { "id": "${uuid}", "alterId": 0, "add": "${add}", "email": "${domain}_${uuid}" } ] }, "streamSettings": { "network": "ws", "security": "none", "wsSettings": { "acceptProxyProtocol": true, "path": "/${customPath}vws" } } } ] } EOF addClients "/etc/v2ray-agent/xray/conf/05_VMess_WS_inbounds.json" "${addClientsStatus}" fi if echo "${selectCustomInstallType}" | grep -q 5 || [[ "$1" == "all" ]]; then getClients "${configPath}../tmp/06_VLESS_gRPC_inbounds.json" "${addClientsStatus}" cat </etc/v2ray-agent/xray/conf/06_VLESS_gRPC_inbounds.json { "inbounds":[ { "port": 31301, "listen": "127.0.0.1", "protocol": "vless", "tag":"VLESSGRPC", "settings": { "clients": [ { "id": "${uuid}", "add": "${add}", "email": "${domain}_${uuid}" } ], "decryption": "none" }, "streamSettings": { "network": "grpc", "grpcSettings": { "serviceName": "${customPath}grpc" } } } ] } EOF addClients "/etc/v2ray-agent/xray/conf/06_VLESS_gRPC_inbounds.json" "${addClientsStatus}" fi # VLESS_TCP getClients "${configPath}../tmp/02_VLESS_TCP_inbounds.json" "${addClientsStatus}" local defaultPort=443 if [[ -n "${customPort}" ]]; then defaultPort=${customPort} fi cat </etc/v2ray-agent/xray/conf/02_VLESS_TCP_inbounds.json { "inbounds":[ { "port": ${defaultPort}, "protocol": "vless", "tag":"VLESSTCP", "settings": { "clients": [ { "id": "${uuid}", "add":"${add}", "flow":"xtls-rprx-vision,none", "email": "${domain}_${uuid}" } ], "decryption": "none", "fallbacks": [ ${fallbacksList} ] }, "streamSettings": { "network": "tcp", "security": "tls", "tlsSettings": { "minVersion": "1.2", "alpn": [ "http/1.1", "h2" ], "certificates": [ { "certificateFile": "/etc/v2ray-agent/tls/${domain}.crt", "keyFile": "/etc/v2ray-agent/tls/${domain}.key", "ocspStapling": 3600, "usage":"encipherment" } ] } } } ] } EOF addClients "/etc/v2ray-agent/xray/conf/02_VLESS_TCP_inbounds.json" "${addClientsStatus}" } # 初始化Trojan-Go配置 initTrojanGoConfig() { echoContent skyBlue "\n进度 $1/${totalProgress} : 初始化Trojan配置" cat </etc/v2ray-agent/trojan/config_full.json { "run_type": "server", "local_addr": "127.0.0.1", "local_port": 31296, "remote_addr": "127.0.0.1", "remote_port": 31300, "disable_http_check":true, "log_level":3, "log_file":"/etc/v2ray-agent/trojan/trojan.log", "password": [ "${uuid}" ], "dns":[ "localhost" ], "transport_plugin":{ "enabled":true, "type":"plaintext" }, "websocket": { "enabled": true, "path": "/${customPath}tws", "host": "${domain}", "add":"${add}" }, "router": { "enabled": false } } EOF } # 自定义CDN IP customCDNIP() { echoContent skyBlue "\n进度 $1/${totalProgress} : 添加cloudflare自选CNAME" echoContent red "\n==============================================================" echoContent yellow "# 注意事项" echoContent yellow "\n教程地址:" echoContent skyBlue "https://github.com/mack-a/v2ray-agent/blob/master/documents/optimize_V2Ray.md" echoContent red "\n如对Cloudflare优化不了解，请不要使用" echoContent yellow "\n 1.移动:104.16.123.96" echoContent yellow " 2.联通:www.cloudflare.com" echoContent yellow " 3.电信:www.digitalocean.com" echoContent skyBlue "----------------------------" read -r -p "请选择[回车不使用]:" selectCloudflareType case ${selectCloudflareType} in 1) add="104.16.123.96" ;; 2) add="www.cloudflare.com" ;; 3) add="www.digitalocean.com" ;; *) add="${domain}" echoContent yellow "\n ---> 不使用" ;; esac } # 通用 defaultBase64Code() { local type=$1 local email=$2 local id=$3 port=${currentDefaultPort} local subAccount subAccount=$(echo "${email}" | awk -F "[_]" '{print $1}')_$(echo "${id}_currentHost" | md5sum | awk '{print $1}') if [[ "${type}" == "vlesstcp" ]]; then if [[ "${coreInstallType}" == "1" ]] && echo "${currentInstallProtocolType}" | grep -q 0; then echoContent yellow " ---> 通用格式(VLESS+TCP+TLS/xtls-rprx-vision)" echoContent green " vless://${id}@${currentHost}:${currentDefaultPort}?encryption=none&security=tls&type=tcp&host=${currentHost}&headerType=none&sni=${currentHost}&flow=xtls-rprx-vision#${email}\n" echoContent yellow " ---> 格式化明文(VLESS+TCP+TLS/xtls-rprx-vision)" echoContent green "协议类型:VLESS，地址:${currentHost}，端口:${currentDefaultPort}，用户ID:${id}，安全:tls，传输方式:tcp，flow:xtls-rprx-vision，账户名:${email}\n" cat <>"/etc/v2ray-agent/subscribe_tmp/${subAccount}" vless://${id}@${currentHost}:${currentDefaultPort}?encryption=none&security=tls&type=tcp&host=${currentHost}&headerType=none&sni=${currentHost}&flow=xtls-rprx-vision#${email} EOF echoContent yellow " ---> 二维码 VLESS(VLESS+TCP+TLS/xtls-rprx-vision)" echoContent green " https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3A%2F%2F${id}%40${currentHost}%3A${currentDefaultPort}%3Fencryption%3Dnone%26security%3Dtls%26type%3Dtcp%26${currentHost}%3D${currentHost}%26headerType%3Dnone%26sni%3D${currentHost}%26flow%3Dxtls-rprx-vision%23${email}\n" echoContent skyBlue "----------------------------------------------------------------------------------" elif [[ "${coreInstallType}" == 2 ]]; then echoContent yellow " ---> 通用格式(VLESS+TCP+TLS)" echoContent green " vless://${id}@${currentHost}:${currentDefaultPort}?security=tls&encryption=none&host=${currentHost}&headerType=none&type=tcp#${email}\n" echoContent yellow " ---> 格式化明文(VLESS+TCP+TLS)" echoContent green " 协议类型:VLESS，地址:${currentHost}，端口:${currentDefaultPort}，用户ID:${id}，安全:tls，传输方式:tcp，账户名:${email}\n" cat <>"/etc/v2ray-agent/subscribe_tmp/${subAccount}" vless://${id}@${currentHost}:${currentDefaultPort}?security=tls&encryption=none&host=${currentHost}&headerType=none&type=tcp#${email} EOF echoContent yellow " ---> 二维码 VLESS(VLESS+TCP+TLS)" echoContent green " https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3a%2f%2f${id}%40${currentHost}%3a${currentDefaultPort}%3fsecurity%3dtls%26encryption%3dnone%26host%3d${currentHost}%26headerType%3dnone%26type%3dtcp%23${email}\n" fi elif [[ "${type}" == "trojanTCPXTLS" ]]; then echoContent yellow " ---> 通用格式(Trojan+TCP+TLS/xtls-rprx-vision)" echoContent green " trojan://${id}@${currentHost}:${currentDefaultPort}?encryption=none&security=xtls&type=tcp&host=${currentHost}&headerType=none&sni=${currentHost}&flow=xtls-rprx-vision#${email}\n" echoContent yellow " ---> 格式化明文(Trojan+TCP+TLS/xtls-rprx-vision)" echoContent green "协议类型:Trojan，地址:${currentHost}，端口:${currentDefaultPort}，用户ID:${id}，安全:xtls，传输方式:tcp，flow:xtls-rprx-vision，账户名:${email}\n" cat <>"/etc/v2ray-agent/subscribe_tmp/${subAccount}" trojan://${id}@${currentHost}:${currentDefaultPort}?encryption=none&security=xtls&type=tcp&host=${currentHost}&headerType=none&sni=${currentHost}&flow=xtls-rprx-vision#${email} EOF echoContent yellow " ---> 二维码 Trojan(Trojan+TCP+TLS/xtls-rprx-vision)" echoContent green " https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=trojan%3A%2F%2F${id}%40${currentHost}%3A${currentDefaultPort}%3Fencryption%3Dnone%26security%3Dxtls%26type%3Dtcp%26${currentHost}%3D${currentHost}%26headerType%3Dnone%26sni%3D${currentHost}%26flow%3Dxtls-rprx-vision%23${email}\n" elif [[ "${type}" == "vmessws" ]]; then qrCodeBase64Default=$(echo -n "{\"port\":${currentDefaultPort},\"ps\":\"${email}\",\"tls\":\"tls\",\"id\":\"${id}\",\"aid\":0,\"v\":2,\"host\":\"${currentHost}\",\"type\":\"none\",\"path\":\"/${currentPath}vws\",\"net\":\"ws\",\"add\":\"${currentAdd}\",\"allowInsecure\":0,\"method\":\"none\",\"peer\":\"${currentHost}\",\"sni\":\"${currentHost}\"}" | base64 -w 0) qrCodeBase64Default="${qrCodeBase64Default// /}" echoContent yellow " ---> 通用json(VMess+WS+TLS)" echoContent green " {\"port\":${currentDefaultPort},\"ps\":\"${email}\",\"tls\":\"tls\",\"id\":\"${id}\",\"aid\":0,\"v\":2,\"host\":\"${currentHost}\",\"type\":\"none\",\"path\":\"/${currentPath}vws\",\"net\":\"ws\",\"add\":\"${currentAdd}\",\"allowInsecure\":0,\"method\":\"none\",\"peer\":\"${currentHost}\",\"sni\":\"${currentHost}\"}\n" echoContent yellow " ---> 通用vmess(VMess+WS+TLS)链接" echoContent green " vmess://${qrCodeBase64Default}\n" echoContent yellow " ---> 二维码 vmess(VMess+WS+TLS)" cat <>"/etc/v2ray-agent/subscribe_tmp/${subAccount}" vmess://${qrCodeBase64Default} EOF echoContent green " https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vmess://${qrCodeBase64Default}\n" elif [[ "${type}" == "vlessws" ]]; then echoContent yellow " ---> 通用格式(VLESS+WS+TLS)" echoContent green " vless://${id}@${currentAdd}:${currentDefaultPort}?encryption=none&security=tls&type=ws&host=${currentHost}&sni=${currentHost}&path=/${currentPath}ws#${email}\n" echoContent yellow " ---> 格式化明文(VLESS+WS+TLS)" echoContent green " 协议类型:VLESS，地址:${currentAdd}，伪装域名/SNI:${currentHost}，端口:${currentDefaultPort}，用户ID:${id}，安全:tls，传输方式:ws，路径:/${currentPath}ws，账户名:${email}\n" cat <>"/etc/v2ray-agent/subscribe_tmp/${subAccount}" vless://${id}@${currentAdd}:${currentDefaultPort}?encryption=none&security=tls&type=ws&host=${currentHost}&sni=${currentHost}&path=/${currentPath}ws#${email} EOF echoContent yellow " ---> 二维码 VLESS(VLESS+WS+TLS)" echoContent green " https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3A%2F%2F${id}%40${currentAdd}%3A${currentDefaultPort}%3Fencryption%3Dnone%26security%3Dtls%26type%3Dws%26host%3D${currentHost}%26sni%3D${currentHost}%26path%3D%252f${currentPath}ws%23${email}" elif [[ "${type}" == "vlessgrpc" ]]; then echoContent yellow " ---> 通用格式(VLESS+gRPC+TLS)" echoContent green " vless://${id}@${currentAdd}:${currentDefaultPort}?encryption=none&security=tls&type=grpc&host=${currentHost}&path=${currentPath}grpc&serviceName=${currentPath}grpc&alpn=h2&sni=${currentHost}#${email}\n" echoContent yellow " ---> 格式化明文(VLESS+gRPC+TLS)" echoContent green " 协议类型:VLESS，地址:${currentAdd}，伪装域名/SNI:${currentHost}，端口:${currentDefaultPort}，用户ID:${id}，安全:tls，传输方式:gRPC，alpn:h2，serviceName:${currentPath}grpc，账户名:${email}\n" cat <>"/etc/v2ray-agent/subscribe_tmp/${subAccount}" vless://${id}@${currentAdd}:${currentDefaultPort}?encryption=none&security=tls&type=grpc&host=${currentHost}&path=${currentPath}grpc&serviceName=${currentPath}grpc&alpn=h2&sni=${currentHost}#${email} EOF echoContent yellow " ---> 二维码 VLESS(VLESS+gRPC+TLS)" echoContent green " https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3A%2F%2F${id}%40${currentAdd}%3A${currentDefaultPort}%3Fencryption%3Dnone%26security%3Dtls%26type%3Dgrpc%26host%3D${currentHost}%26serviceName%3D${currentPath}grpc%26path%3D${currentPath}grpc%26sni%3D${currentHost}%26alpn%3Dh2%23${email}" elif [[ "${type}" == "trojan" ]]; then # URLEncode echoContent yellow " ---> Trojan(TLS)" echoContent green " trojan://${id}@${currentHost}:${currentDefaultPort}?peer=${currentHost}&sni=${currentHost}&alpn=http/1.1#${currentHost}_Trojan\n" cat <>"/etc/v2ray-agent/subscribe_tmp/${subAccount}" trojan://${id}@${currentHost}:${currentDefaultPort}?peer=${currentHost}&sni=${currentHost}&alpn=http/1.1#${email}_Trojan EOF echoContent yellow " ---> 二维码 Trojan(TLS)" echoContent green " https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=trojan%3a%2f%2f${id}%40${currentHost}%3a${port}%3fpeer%3d${currentHost}%26sni%3d${currentHost}%26alpn%3Dhttp/1.1%23${email}\n" elif [[ "${type}" == "trojangrpc" ]]; then # URLEncode echoContent yellow " ---> Trojan gRPC(TLS)" echoContent green " trojan://${id}@${currentAdd}:${currentDefaultPort}?encryption=none&peer=${currentHost}&security=tls&type=grpc&sni=${currentHost}&alpn=h2&path=${currentPath}trojangrpc&serviceName=${currentPath}trojangrpc#${email}\n" cat <>"/etc/v2ray-agent/subscribe_tmp/${subAccount}" trojan://${id}@${currentAdd}:${currentDefaultPort}?encryption=none&peer=${currentHost}&security=tls&type=grpc&sni=${currentHost}&alpn=h2&path=${currentPath}trojangrpc&serviceName=${currentPath}trojangrpc#${email} EOF echoContent yellow " ---> 二维码 Trojan gRPC(TLS)" echoContent green " https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=trojan%3a%2f%2f${id}%40${currentAdd}%3a${currentDefaultPort}%3Fencryption%3Dnone%26security%3Dtls%26peer%3d${currentHost}%26type%3Dgrpc%26sni%3d${currentHost}%26path%3D${currentPath}trojangrpc%26alpn%3Dh2%26serviceName%3D${currentPath}trojangrpc%23${email}\n" elif [[ "${type}" == "hysteria" ]]; then echoContent yellow " ---> Hysteria(TLS)" echoContent green " hysteria://${currentHost}:${hysteriaPort}?protocol=${hysteriaProtocol}&auth=${id}&peer=${currentHost}&insecure=0&alpn=h3&upmbps=${hysteriaClientUploadSpeed}&downmbps=${hysteriaClientDownloadSpeed}#${email}\n" cat <>"/etc/v2ray-agent/subscribe_tmp/${subAccount}" hysteria://${currentHost}:${hysteriaPort}?protocol=${hysteriaProtocol}&auth=${id}&peer=${currentHost}&insecure=0&alpn=h3&upmbps=${hysteriaClientUploadSpeed}&downmbps=${hysteriaClientDownloadSpeed}#${email} EOF echoContent yellow " ---> 二维码 Hysteria(TLS)" echoContent green " https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=hysteria%3A%2F%2F${currentHost}%3A${hysteriaPort}%3Fprotocol%3D${hysteriaProtocol}%26auth%3D${id}%26peer%3D${currentHost}%26insecure%3D0%26alpn%3Dh3%26upmbps%3D${hysteriaClientUploadSpeed}%26downmbps%3D${hysteriaClientDownloadSpeed}%23${email}\n" fi } # 账号 showAccounts() { readInstallType readInstallProtocolType readConfigHostPathUUID readHysteriaConfig echoContent skyBlue "\n进度 $1/${totalProgress} : 账号" local show # VLESS TCP if [[ -n "${configPath}" ]]; then show=1 if echo "${currentInstallProtocolType}" | grep -q trojan; then echoContent skyBlue "===================== Trojan TCP TLS/XTLS-vision ======================\n" jq .inbounds[0].settings.clients ${configPath}02_trojan_TCP_inbounds.json | jq -c '.[]' | while read -r user; do local email= email=$(echo "${user}" | jq -r .email) echoContent skyBlue "\n ---> 账号:${email}" defaultBase64Code trojanTCPXTLS "${email}" "$(echo "${user}" | jq -r .password)" done else echoContent skyBlue "===================== VLESS TCP TLS/XTLS-vision ======================\n" jq .inbounds[0].settings.clients ${configPath}02_VLESS_TCP_inbounds.json | jq -c '.[]' | while read -r user; do local email= email=$(echo "${user}" | jq -r .email) echoContent skyBlue "\n ---> 账号:${email}" echo defaultBase64Code vlesstcp "${email}" "$(echo "${user}" | jq -r .id)" done fi # VLESS WS if echo ${currentInstallProtocolType} | grep -q 1; then echoContent skyBlue "\n================================ VLESS WS TLS CDN ================================\n" jq .inbounds[0].settings.clients ${configPath}03_VLESS_WS_inbounds.json | jq -c '.[]' | while read -r user; do local email= email=$(echo "${user}" | jq -r .email) echoContent skyBlue "\n ---> 账号:${email}" echo local path="${currentPath}ws" # if [[ ${coreInstallType} == "1" ]]; then # echoContent yellow "Xray的0-RTT path后面会有，不兼容以v2ray为核心的客户端，请手动删除后使用\n" # path="${currentPath}ws" # fi defaultBase64Code vlessws "${email}" "$(echo "${user}" | jq -r .id)" done fi # VMess WS if echo ${currentInstallProtocolType} | grep -q 3; then echoContent skyBlue "\n================================ VMess WS TLS CDN ================================\n" local path="${currentPath}vws" if [[ ${coreInstallType} == "1" ]]; then path="${currentPath}vws" fi jq .inbounds[0].settings.clients ${configPath}05_VMess_WS_inbounds.json | jq -c '.[]' | while read -r user; do local email= email=$(echo "${user}" | jq -r .email) echoContent skyBlue "\n ---> 账号:${email}" echo defaultBase64Code vmessws "${email}" "$(echo "${user}" | jq -r .id)" done fi # VLESS grpc if echo ${currentInstallProtocolType} | grep -q 5; then echoContent skyBlue "\n=============================== VLESS gRPC TLS CDN ===============================\n" echoContent red "\n --->gRPC处于测试阶段，可能对你使用的客户端不兼容，如不能使用请忽略" # local serviceName # serviceName=$(jq -r .inbounds[0].streamSettings.grpcSettings.serviceName ${configPath}06_VLESS_gRPC_inbounds.json) jq .inbounds[0].settings.clients ${configPath}06_VLESS_gRPC_inbounds.json | jq -c '.[]' | while read -r user; do local email= email=$(echo "${user}" | jq -r .email) echoContent skyBlue "\n ---> 账号:${email}" echo defaultBase64Code vlessgrpc "${email}" "$(echo "${user}" | jq -r .id)" done fi fi # trojan tcp if echo ${currentInstallProtocolType} | grep -q 4; then echoContent skyBlue "\n================================== Trojan TLS ==================================\n" jq .inbounds[0].settings.clients ${configPath}04_trojan_TCP_inbounds.json | jq -c '.[]' | while read -r user; do local email= email=$(echo "${user}" | jq -r .email) echoContent skyBlue "\n ---> 账号:${email}" defaultBase64Code trojan "${email}" "$(echo "${user}" | jq -r .password)" done fi if echo ${currentInstallProtocolType} | grep -q 2; then echoContent skyBlue "\n================================ Trojan gRPC TLS ================================\n" echoContent red "\n --->gRPC处于测试阶段，可能对你使用的客户端不兼容，如不能使用请忽略" jq .inbounds[0].settings.clients ${configPath}04_trojan_gRPC_inbounds.json | jq -c '.[]' | while read -r user; do local email= email=$(echo "${user}" | jq -r .email) echoContent skyBlue "\n ---> 账号:${email}" echo defaultBase64Code trojangrpc "${email}" "$(echo "${user}" | jq -r .password)" done fi if echo ${currentInstallProtocolType} | grep -q 6; then echoContent skyBlue "\n================================ Hysteria TLS ================================\n" echoContent red "\n --->Hysteria速度依赖与本地的网络环境，如果被QoS使用体验会非常差。IDC也有可能认为是攻击，请谨慎使用" jq .auth.config ${hysteriaConfigPath}config.json | jq -r '.[]' | while read -r user; do local defaultUser= local uuidType= uuidType=".id" if [[ "${frontingType}" == "02_trojan_TCP_inbounds" ]]; then uuidType=".password" fi defaultUser=$(jq '.inbounds[0].settings.clients[]|select('${uuidType}'=="'"${user}"'")' ${configPath}${frontingType}.json) local email= email=$(echo "${defaultUser}" | jq -r .email) if [[ -n ${defaultUser} ]]; then echoContent skyBlue "\n ---> 账号:${email}" echo defaultBase64Code hysteria "${email}" "${user}" fi done fi if [[ -z ${show} ]]; then echoContent red " ---> 未安装" fi } # 移除nginx302配置 removeNginx302() { local count=0 grep -n "return 302" <"/etc/nginx/conf.d/alone.conf" | while read -r line; do if ! echo "${line}" | grep -q "request_uri"; then local removeIndex= removeIndex=$(echo "${line}" | awk -F "[:]" '{print $1}') removeIndex=$((removeIndex + count)) sed -i "${removeIndex}d" /etc/nginx/conf.d/alone.conf count=$((count - 1)) fi done } # 检查302是否成功 checkNginx302() { local domain302Status= domain302Status=$(curl -s "https://${currentHost}") if echo "${domain302Status}" | grep -q "302"; then local domain302Result= domain302Result=$(curl -L -s "https://${currentHost}") if [[ -n "${domain302Result}" ]]; then echoContent green " ---> 302重定向设置成功" exit 0 fi fi echoContent red " ---> 302重定向设置失败，请仔细检查是否和示例相同" backupNginxConfig restoreBackup } # 备份恢复nginx文件 backupNginxConfig() { if [[ "$1" == "backup" ]]; then cp /etc/nginx/conf.d/alone.conf /etc/v2ray-agent/alone_backup.conf echoContent green " ---> nginx配置文件备份成功" fi if [[ "$1" == "restoreBackup" ]] && [[ -f "/etc/v2ray-agent/alone_backup.conf" ]]; then cp /etc/v2ray-agent/alone_backup.conf /etc/nginx/conf.d/alone.conf echoContent green " ---> nginx配置文件恢复备份成功" rm /etc/v2ray-agent/alone_backup.conf fi } # 添加302配置 addNginx302() { # local line302Result= # line302Result=$(| tail -n 1) local count=1 grep -n "Strict-Transport-Security" <"/etc/nginx/conf.d/alone.conf" | while read -r line; do if [[ -n "${line}" ]]; then local insertIndex= insertIndex="$(echo "${line}" | awk -F "[:]" '{print $1}')" insertIndex=$((insertIndex + count)) sed "${insertIndex}i return 302 '$1';" /etc/nginx/conf.d/alone.conf >/etc/nginx/conf.d/tmpfile && mv /etc/nginx/conf.d/tmpfile /etc/nginx/conf.d/alone.conf count=$((count + 1)) else echoContent red " ---> 302添加失败" backupNginxConfig restoreBackup fi done } # 更新伪装站 updateNginxBlog() { echoContent skyBlue "\n进度 $1/${totalProgress} : 更换伪装站点" echoContent red "==============================================================" echoContent yellow "# 如需自定义，请手动复制模版文件到 /usr/share/nginx/html \n" echoContent yellow "1.新手引导" echoContent yellow "2.游戏网站" echoContent yellow "3.个人博客01" echoContent yellow "4.企业站" echoContent yellow "5.解锁加密的音乐文件模版[https://github.com/ix64/unlock-music]" echoContent yellow "6.mikutap[https://github.com/HFIProgramming/mikutap]" echoContent yellow "7.企业站02" echoContent yellow "8.个人博客02" echoContent yellow "9.404自动跳转baidu" echoContent yellow "10.302重定向网站" echoContent red "==============================================================" read -r -p "请选择:" selectInstallNginxBlogType if [[ "${selectInstallNginxBlogType}" == "10" ]]; then echoContent red "\n==============================================================" echoContent yellow "重定向的优先级更高，配置302之后如果更改伪装站点，根路由下伪装站点将不起作用" echoContent yellow "如想要伪装站点实现作用需删除302重定向配置\n" echoContent yellow "1.添加" echoContent yellow "2.删除" echoContent red "==============================================================" read -r -p "请选择:" redirectStatus if [[ "${redirectStatus}" == "1" ]]; then backupNginxConfig backup read -r -p "请输入要重定向的域名,例如 https://www.baidu.com:" redirectDomain removeNginx302 addNginx302 "${redirectDomain}" handleNginx stop handleNginx start if [[ -z $(pgrep -f nginx) ]]; then backupNginxConfig restoreBackup handleNginx start exit 0 fi checkNginx302 exit 0 fi if [[ "${redirectStatus}" == "2" ]]; then removeNginx302 echoContent green " ---> 移除302重定向成功" exit 0 fi fi if [[ "${selectInstallNginxBlogType}" =~ ^[1-9]$ ]]; then rm -rf /usr/share/nginx/* if wget --help | grep -q show-progress; then wget -c -q --show-progress -P /usr/share/nginx "https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html${selectInstallNginxBlogType}.zip" >/dev/null else wget -c -P /usr/share/nginx "https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html${selectInstallNginxBlogType}.zip" >/dev/null fi unzip -o "/usr/share/nginx/html${selectInstallNginxBlogType}.zip" -d /usr/share/nginx/html >/dev/null rm -f "/usr/share/nginx/html${selectInstallNginxBlogType}.zip*" echoContent green " ---> 更换伪站成功" else echoContent red " ---> 选择错误，请重新选择" updateNginxBlog fi } # 添加新端口 addCorePort() { readHysteriaConfig echoContent skyBlue "\n功能 1/${totalProgress} : 添加新端口" echoContent red "\n==============================================================" echoContent yellow "# 注意事项\n" echoContent yellow "支持批量添加" echoContent yellow "不影响默认端口的使用" echoContent yellow "查看账号时，只会展示默认端口的账号" echoContent yellow "不允许有特殊字符，注意逗号的格式" echoContent yellow "会同时安装hysteria新端口" echoContent yellow "录入示例:2053,2083,2087\n" echoContent yellow "1.添加端口" echoContent yellow "2.删除端口" echoContent red "==============================================================" read -r -p "请选择:" selectNewPortType if [[ "${selectNewPortType}" == "1" ]]; then read -r -p "请输入端口号:" newPort read -r -p "请输入默认的端口号，同时会更改订阅端口以及节点端口，[回车]默认443:" defaultPort if [[ -n "${defaultPort}" ]]; then rm -rf "$(find ${configPath}* | grep "default")" fi if [[ -n "${newPort}" ]]; then while read -r port; do rm -rf "$(find ${configPath}* | grep "${port}")" local fileName= local hysteriaFileName= if [[ -n "${defaultPort}" && "${port}" == "${defaultPort}" ]]; then fileName="${configPath}02_dokodemodoor_inbounds_${port}_default.json" else fileName="${configPath}02_dokodemodoor_inbounds_${port}.json" fi if [[ -n ${hysteriaPort} ]]; then hysteriaFileName="${configPath}02_dokodemodoor_inbounds_hysteria_${port}.json" fi # 开放端口 allowPort "${port}" allowPort "${port}" "udp" local settingsPort=443 if [[ -n "${customPort}" ]]; then settingsPort=${customPort} fi if [[ -n ${hysteriaFileName} ]]; then cat <"${hysteriaFileName}" { "inbounds": [ { "listen": "0.0.0.0", "port": ${port}, "protocol": "dokodemo-door", "settings": { "address": "127.0.0.1", "port": ${hysteriaPort}, "network": "udp", "followRedirect": false }, "tag": "dokodemo-door-newPort-hysteria-${port}" } ] } EOF fi cat <"${fileName}" { "inbounds": [ { "listen": "0.0.0.0", "port": ${port}, "protocol": "dokodemo-door", "settings": { "address": "127.0.0.1", "port": ${settingsPort}, "network": "tcp", "followRedirect": false }, "tag": "dokodemo-door-newPort-${port}" } ] } EOF done < <(echo "${newPort}" | tr ',' '\n') echoContent green " ---> 添加成功" reloadCore addCorePort fi elif [[ "${selectNewPortType}" == "2" ]]; then find ${configPath} -name "*dokodemodoor*" | awk -F "[c][o][n][f][/]" '{print ""NR""":"$2}' read -r -p "请输入要删除的端口编号:" portIndex local dokoConfig dokoConfig=$(find ${configPath} -name "*dokodemodoor*" | awk -F "[c][o][n][f][/]" '{print ""NR""":"$2}' | grep "${portIndex}:") if [[ -n "${dokoConfig}" ]]; then rm "${configPath}/$(echo "${dokoConfig}" | awk -F "[:]" '{print $2}')" reloadCore addCorePort else echoContent yellow "\n ---> 编号输入错误，请重新选择" addCorePort fi fi } # 卸载脚本 unInstall() { read -r -p "是否确认卸载安装内容？[y/n]:" unInstallStatus if [[ "${unInstallStatus}" != "y" ]]; then echoContent green " ---> 放弃卸载" menu exit 0 fi handleNginx stop if [[ -z $(pgrep -f "nginx") ]]; then echoContent green " ---> 停止Nginx成功" fi if [[ "${coreInstallType}" == "1" ]]; then handleXray stop rm -rf /etc/systemd/system/xray.service echoContent green " ---> 删除Xray开机自启完成" elif [[ "${coreInstallType}" == "2" ]]; then handleV2Ray stop rm -rf /etc/systemd/system/v2ray.service echoContent green " ---> 删除V2Ray开机自启完成" fi if [[ -z "${hysteriaConfigPath}" ]]; then handleHysteria stop rm -rf /etc/systemd/system/hysteria.service echoContent green " ---> 删除Hysteria开机自启完成" fi if [[ -f "/root/.acme.sh/acme.sh.env" ]] && grep -q 'acme.sh.env' 删除acme.sh完成" rm -rf /tmp/v2ray-agent-tls/* if [[ -d "/etc/v2ray-agent/tls" ]] && [[ -n $(find /etc/v2ray-agent/tls/ -name "*.key") ]] && [[ -n $(find /etc/v2ray-agent/tls/ -name "*.crt") ]]; then mv /etc/v2ray-agent/tls /tmp/v2ray-agent-tls if [[ -n $(find /tmp/v2ray-agent-tls -name '*.key') ]]; then echoContent yellow " ---> 备份证书成功，请注意留存。[/tmp/v2ray-agent-tls]" fi fi rm -rf /etc/v2ray-agent rm -rf ${nginxConfigPath}alone.conf if [[ -d "/usr/share/nginx/html" && -f "/usr/share/nginx/html/check" ]]; then rm -rf /usr/share/nginx/html echoContent green " ---> 删除伪装网站完成" fi rm -rf /usr/bin/vasma rm -rf /usr/sbin/vasma echoContent green " ---> 卸载快捷方式完成" echoContent green " ---> 卸载v2ray-agent脚本完成" } #updateGeoSite # 修改V2Ray CDN节点 updateV2RayCDN() { # todo 重构此方法 echoContent skyBlue "\n进度 $1/${totalProgress} : 修改CDN节点" if [[ -n "${currentAdd}" ]]; then echoContent red "==============================================================" echoContent yellow "1.CNAME www.digitalocean.com" echoContent yellow "2.CNAME www.cloudflare.com" echoContent yellow "3.CNAME hostmonit.com" echoContent yellow "4.手动输入" echoContent red "==============================================================" read -r -p "请选择:" selectCDNType case ${selectCDNType} in 1) setDomain="www.digitalocean.com" ;; 2) setDomain="www.cloudflare.com" ;; 3) setDomain="hostmonit.com" ;; 4) read -r -p "请输入想要自定义CDN IP或者域名:" setDomain ;; esac if [[ -n ${setDomain} ]]; then if [[ -n "${currentAdd}" ]]; then sed -i "s/\"${currentAdd}\"/\"${setDomain}\"/g" "$(grep "${currentAdd}" -rl ${configPath}${frontingType}.json)" fi if [[ $(jq -r .inbounds[0].settings.clients[0].add ${configPath}${frontingType}.json) == "${setDomain}" ]]; then echoContent green " ---> CDN修改成功" reloadCore else echoContent red " ---> 修改CDN失败" fi fi else echoContent red " ---> 未安装可用类型" fi } # manageUser 用户管理 manageUser() { echoContent skyBlue "\n进度 $1/${totalProgress} : 多用户管理" echoContent skyBlue "-----------------------------------------------------" echoContent yellow "1.添加用户" echoContent yellow "2.删除用户" echoContent skyBlue "-----------------------------------------------------" read -r -p "请选择:" manageUserType if [[ "${manageUserType}" == "1" ]]; then addUser elif [[ "${manageUserType}" == "2" ]]; then removeUser else echoContent red " ---> 选择错误" fi } # 自定义uuid customUUID() { # read -r -p "是否自定义UUID ？[y/n]:" customUUIDStatus # echo # if [[ "${customUUIDStatus}" == "y" ]]; then read -r -p "请输入合法的UUID，[回车]随机UUID:" currentCustomUUID echo if [[ -z "${currentCustomUUID}" ]]; then # echoContent red " ---> UUID不可为空" currentCustomUUID=$(${ctlPath} uuid) echoContent yellow "uuid:${currentCustomUUID}\n" else jq -r -c '.inbounds[0].settings.clients[].id' ${configPath}${frontingType}.json | while read -r line; do if [[ "${line}" == "${currentCustomUUID}" ]]; then echo >/tmp/v2ray-agent fi done if [[ -f "/tmp/v2ray-agent" && -n $(cat /tmp/v2ray-agent) ]]; then echoContent red " ---> UUID不可重复" rm /tmp/v2ray-agent exit 0 fi fi # fi } # 自定义email customUserEmail() { # read -r -p "是否自定义email ？[y/n]:" customEmailStatus # echo # if [[ "${customEmailStatus}" == "y" ]]; then read -r -p "请输入合法的email，[回车]随机email:" currentCustomEmail echo if [[ -z "${currentCustomEmail}" ]]; then currentCustomEmail="${currentHost}_${currentCustomUUID}" echoContent yellow "email: ${currentCustomEmail}\n" # echoContent red " ---> email不可为空" else jq -r -c '.inbounds[0].settings.clients[].email' ${configPath}${frontingType}.json | while read -r line; do if [[ "${line}" == "${currentCustomEmail}" ]]; then echo >/tmp/v2ray-agent fi done if [[ -f "/tmp/v2ray-agent" && -n $(cat /tmp/v2ray-agent) ]]; then echoContent red " ---> email不可重复" rm /tmp/v2ray-agent exit 0 fi fi # fi } # 添加用户 addUser() { echoContent yellow "添加新用户后，需要重新查看订阅" read -r -p "请输入要添加的用户数量:" userNum echo if [[ -z ${userNum} || ${userNum} -le 0 ]]; then echoContent red " ---> 输入有误，请重新输入" exit 0 fi # 生成用户 if [[ "${userNum}" == "1" ]]; then customUUID customUserEmail fi while [[ ${userNum} -gt 0 ]]; do local users= ((userNum--)) || true if [[ -n "${currentCustomUUID}" ]]; then uuid=${currentCustomUUID} else uuid=$(${ctlPath} uuid) fi if [[ -n "${currentCustomEmail}" ]]; then email=${currentCustomEmail} else email=${currentHost}_${uuid} fi # 兼容v2ray-core users="{\"id\":\"${uuid}\",\"flow\":\"xtls-rprx-vision,none\",\"email\":\"${email}\",\"alterId\":0}" if [[ "${coreInstallType}" == "2" ]]; then users="{\"id\":\"${uuid}\",\"email\":\"${email}\",\"alterId\":0}" fi if echo ${currentInstallProtocolType} | grep -q 0; then local vlessUsers="${users//\,\"alterId\":0/}" local vlessTcpResult vlessTcpResult=$(jq -r ".inbounds[0].settings.clients += [${vlessUsers}]" ${configPath}${frontingType}.json) echo "${vlessTcpResult}" | jq . >${configPath}${frontingType}.json fi if echo ${currentInstallProtocolType} | grep -q trojan; then local trojanXTLSUsers="${users//\,\"alterId\":0/}" trojanXTLSUsers=${trojanXTLSUsers//"id"/"password"} local trojanXTLSResult trojanXTLSResult=$(jq -r ".inbounds[0].settings.clients += [${trojanXTLSUsers}]" ${configPath}${frontingType}.json) echo "${trojanXTLSResult}" | jq . >${configPath}${frontingType}.json fi if echo ${currentInstallProtocolType} | grep -q 1; then local vlessUsers="${users//\,\"alterId\":0/}" vlessUsers="${vlessUsers//\"flow\":\"xtls-rprx-vision,none\"\,/}" local vlessWsResult vlessWsResult=$(jq -r ".inbounds[0].settings.clients += [${vlessUsers}]" ${configPath}03_VLESS_WS_inbounds.json) echo "${vlessWsResult}" | jq . >${configPath}03_VLESS_WS_inbounds.json fi if echo ${currentInstallProtocolType} | grep -q 2; then local trojangRPCUsers="${users//\"flow\":\"xtls-rprx-vision,none\"\,/}" trojangRPCUsers="${trojangRPCUsers//\,\"alterId\":0/}" trojangRPCUsers=${trojangRPCUsers//"id"/"password"} local trojangRPCResult trojangRPCResult=$(jq -r ".inbounds[0].settings.clients += [${trojangRPCUsers}]" ${configPath}04_trojan_gRPC_inbounds.json) echo "${trojangRPCResult}" | jq . >${configPath}04_trojan_gRPC_inbounds.json fi if echo ${currentInstallProtocolType} | grep -q 3; then local vmessUsers="${users//\"flow\":\"xtls-rprx-vision,none\"\,/}" local vmessWsResult vmessWsResult=$(jq -r ".inbounds[0].settings.clients += [${vmessUsers}]" ${configPath}05_VMess_WS_inbounds.json) echo "${vmessWsResult}" | jq . >${configPath}05_VMess_WS_inbounds.json fi if echo ${currentInstallProtocolType} | grep -q 5; then local vlessGRPCUsers="${users//\"flow\":\"xtls-rprx-vision,none\"\,/}" vlessGRPCUsers="${vlessGRPCUsers//\,\"alterId\":0/}" local vlessGRPCResult vlessGRPCResult=$(jq -r ".inbounds[0].settings.clients += [${vlessGRPCUsers}]" ${configPath}06_VLESS_gRPC_inbounds.json) echo "${vlessGRPCResult}" | jq . >${configPath}06_VLESS_gRPC_inbounds.json fi if echo ${currentInstallProtocolType} | grep -q 4; then local trojanUsers="${users//\"flow\":\"xtls-rprx-vision,none\"\,/}" trojanUsers="${trojanUsers//id/password}" trojanUsers="${trojanUsers//\,\"alterId\":0/}" local trojanTCPResult trojanTCPResult=$(jq -r ".inbounds[0].settings.clients += [${trojanUsers}]" ${configPath}04_trojan_TCP_inbounds.json) echo "${trojanTCPResult}" | jq . >${configPath}04_trojan_TCP_inbounds.json fi if echo ${currentInstallProtocolType} | grep -q 6; then local hysteriaResult hysteriaResult=$(jq -r ".auth.config += [\"${uuid}\"]" ${hysteriaConfigPath}config.json) echo "${hysteriaResult}" | jq . >${hysteriaConfigPath}config.json fi done reloadCore echoContent green " ---> 添加完成" manageAccount 1 } # 移除用户 removeUser() { if echo ${currentInstallProtocolType} | grep -q 0 || echo ${currentInstallProtocolType} | grep -q trojan; then jq -r -c .inbounds[0].settings.clients[].email ${configPath}${frontingType}.json | awk '{print NR""":"$0}' read -r -p "请选择要删除的用户编号[仅支持单个删除]:" delUserIndex if [[ $(jq -r '.inbounds[0].settings.clients|length' ${configPath}${frontingType}.json) -lt ${delUserIndex} ]]; then echoContent red " ---> 选择错误" else delUserIndex=$((delUserIndex - 1)) local vlessTcpResult vlessTcpResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}${frontingType}.json) echo "${vlessTcpResult}" | jq . >${configPath}${frontingType}.json fi fi if [[ -n "${delUserIndex}" ]]; then if echo ${currentInstallProtocolType} | grep -q 1; then local vlessWSResult vlessWSResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}03_VLESS_WS_inbounds.json) echo "${vlessWSResult}" | jq . >${configPath}03_VLESS_WS_inbounds.json fi if echo ${currentInstallProtocolType} | grep -q 2; then local trojangRPCUsers trojangRPCUsers=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}04_trojan_gRPC_inbounds.json) echo "${trojangRPCUsers}" | jq . >${configPath}04_trojan_gRPC_inbounds.json fi if echo ${currentInstallProtocolType} | grep -q 3; then local vmessWSResult vmessWSResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}05_VMess_WS_inbounds.json) echo "${vmessWSResult}" | jq . >${configPath}05_VMess_WS_inbounds.json fi if echo ${currentInstallProtocolType} | grep -q 5; then local vlessGRPCResult vlessGRPCResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}06_VLESS_gRPC_inbounds.json) echo "${vlessGRPCResult}" | jq . >${configPath}06_VLESS_gRPC_inbounds.json fi if echo ${currentInstallProtocolType} | grep -q 4; then local trojanTCPResult trojanTCPResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}04_trojan_TCP_inbounds.json) echo "${trojanTCPResult}" | jq . >${configPath}04_trojan_TCP_inbounds.json fi if echo ${currentInstallProtocolType} | grep -q 6; then local hysteriaResult hysteriaResult=$(jq -r 'del(.auth.config['${delUserIndex}'])' ${hysteriaConfigPath}config.json) echo "${hysteriaResult}" | jq . >${hysteriaConfigPath}config.json fi reloadCore fi manageAccount 1 } # 更新脚本 updateV2RayAgent() { echoContent skyBlue "\n进度 $1/${totalProgress} : 更新v2ray-agent脚本" rm -rf /etc/v2ray-agent/install.sh if wget --help | grep -q show-progress; then wget -c -q --show-progress -P /etc/v2ray-agent/ -N --no-check-certificate "https://raw.githubusercontent.com/mack-a/v2ray-agent/master/install.sh" else wget -c -q -P /etc/v2ray-agent/ -N --no-check-certificate "https://raw.githubusercontent.com/mack-a/v2ray-agent/master/install.sh" fi sudo chmod 700 /etc/v2ray-agent/install.sh local version version=$(grep '当前版本:v' "/etc/v2ray-agent/install.sh" | awk -F "[v]" '{print $2}' | tail -n +2 | head -n 1 | awk -F "[\"]" '{print $1}') echoContent green "\n ---> 更新完毕" echoContent yellow " ---> 请手动执行[vasma]打开脚本" echoContent green " ---> 当前版本:${version}\n" echoContent yellow "如更新不成功，请手动执行下面命令\n" echoContent skyBlue "wget -P /root -N --no-check-certificate https://raw.githubusercontent.com/mack-a/v2ray-agent/master/install.sh && chmod 700 /root/install.sh && /root/install.sh" echo exit 0 } # 防火墙 handleFirewall() { if systemctl status ufw 2>/dev/null | grep -q "active (exited)" && [[ "$1" == "stop" ]]; then systemctl stop ufw >/dev/null 2>&1 systemctl disable ufw >/dev/null 2>&1 echoContent green " ---> ufw关闭成功" fi if systemctl status firewalld 2>/dev/null | grep -q "active (running)" && [[ "$1" == "stop" ]]; then systemctl stop firewalld >/dev/null 2>&1 systemctl disable firewalld >/dev/null 2>&1 echoContent green " ---> firewalld关闭成功" fi } # 安装BBR bbrInstall() { echoContent red "\n==============================================================" echoContent green "BBR、DD脚本用的[ylx2016]的成熟作品，地址[https://github.com/ylx2016/Linux-NetSpeed]，请熟知" echoContent yellow "1.安装脚本【推荐原版BBR+FQ】" echoContent yellow "2.回退主目录" echoContent red "==============================================================" read -r -p "请选择:" installBBRStatus if [[ "${installBBRStatus}" == "1" ]]; then wget -N --no-check-certificate "https://raw.githubusercontent.com/ylx2016/Linux-NetSpeed/master/tcp.sh" && chmod +x tcp.sh && ./tcp.sh else menu fi } # 查看、检查日志 checkLog() { if [[ -z ${configPath} ]]; then echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容" fi local logStatus=false if grep -q "access" ${configPath}00_log.json; then logStatus=true fi echoContent skyBlue "\n功能 $1/${totalProgress} : 查看日志" echoContent red "\n==============================================================" echoContent yellow "# 建议仅调试时打开access日志\n" if [[ "${logStatus}" == "false" ]]; then echoContent yellow "1.打开access日志" else echoContent yellow "1.关闭access日志" fi echoContent yellow "2.监听access日志" echoContent yellow "3.监听error日志" echoContent yellow "4.查看证书定时任务日志" echoContent yellow "5.查看证书安装日志" echoContent yellow "6.清空日志" echoContent red "==============================================================" read -r -p "请选择:" selectAccessLogType local configPathLog=${configPath//conf\//} case ${selectAccessLogType} in 1) if [[ "${logStatus}" == "false" ]]; then cat <${configPath}00_log.json { "log": { "access":"${configPathLog}access.log", "error": "${configPathLog}error.log", "loglevel": "debug" } } EOF elif [[ "${logStatus}" == "true" ]]; then cat <${configPath}00_log.json { "log": { "error": "${configPathLog}error.log", "loglevel": "warning" } } EOF fi reloadCore checkLog 1 ;; 2) tail -f ${configPathLog}access.log ;; 3) tail -f ${configPathLog}error.log ;; 4) tail -n 100 /etc/v2ray-agent/crontab_tls.log ;; 5) tail -n 100 /etc/v2ray-agent/tls/acme.log ;; 6) echo >${configPathLog}access.log echo >${configPathLog}error.log ;; esac } # 脚本快捷方式 aliasInstall() { if [[ -f "$HOME/install.sh" ]] && [[ -d "/etc/v2ray-agent" ]] && grep <"$HOME/install.sh" -q "作者:mack-a"; then mv "$HOME/install.sh" /etc/v2ray-agent/install.sh local vasmaType= if [[ -d "/usr/bin/" ]]; then if [[ ! -f "/usr/bin/vasma" ]]; then ln -s /etc/v2ray-agent/install.sh /usr/bin/vasma chmod 700 /usr/bin/vasma vasmaType=true fi rm -rf "$HOME/install.sh" elif [[ -d "/usr/sbin" ]]; then if [[ ! -f "/usr/sbin/vasma" ]]; then ln -s /etc/v2ray-agent/install.sh /usr/sbin/vasma chmod 700 /usr/sbin/vasma vasmaType=true fi rm -rf "$HOME/install.sh" fi if [[ "${vasmaType}" == "true" ]]; then echoContent green "快捷方式创建成功，可执行[vasma]重新打开脚本" fi fi } # 检查ipv6、ipv4 checkIPv6() { # pingIPv6=$(ping6 -c 1 www.google.com | sed '2{s/[^(]*(//;s/).*//;q;}' | tail -n +2) pingIPv6=$(ping6 -c 1 www.google.com | sed -n '1p' | sed 's/.*(//g;s/).*//g') if [[ -z "${pingIPv6}" ]]; then echoContent red " ---> 不支持ipv6" exit 0 fi } # ipv6 分流 ipv6Routing() { if [[ -z "${configPath}" ]]; then echoContent red " ---> 未安装，请使用脚本安装" menu exit 0 fi checkIPv6 echoContent skyBlue "\n功能 1/${totalProgress} : IPv6分流" echoContent red "\n==============================================================" echoContent yellow "1.添加域名" echoContent yellow "2.卸载IPv6分流" echoContent red "==============================================================" read -r -p "请选择:" ipv6Status if [[ "${ipv6Status}" == "1" ]]; then echoContent red "==============================================================" echoContent yellow "# 注意事项\n" echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]" echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]" echoContent yellow "3.如内核启动失败请检查域名后重新添加域名" echoContent yellow "4.不允许有特殊字符，注意逗号的格式" echoContent yellow "5.每次添加都是重新添加，不会保留上次域名" echoContent yellow "6.强烈建议屏蔽国内的网站，下方输入【cn】即可屏蔽" echoContent yellow "7.录入示例:google,youtube,facebook,cn\n" read -r -p "请按照上面示例录入域名:" domainList if [[ -f "${configPath}09_routing.json" ]]; then unInstallRouting IPv6-out outboundTag routing=$(jq -r ".routing.rules += [{\"type\":\"field\",\"domain\":[\"geosite:${domainList//,/\",\"geosite:}\"],\"outboundTag\":\"IPv6-out\"}]" ${configPath}09_routing.json) echo "${routing}" | jq . >${configPath}09_routing.json else cat <"${configPath}09_routing.json" { "routing":{ "domainStrategy": "IPOnDemand", "rules": [ { "type": "field", "domain": [ "geosite:${domainList//,/\",\"geosite:}" ], "outboundTag": "IPv6-out" } ] } } EOF fi unInstallOutbounds IPv6-out outbounds=$(jq -r '.outbounds += [{"protocol":"freedom","settings":{"domainStrategy":"UseIPv6"},"tag":"IPv6-out"}]' ${configPath}10_ipv4_outbounds.json) echo "${outbounds}" | jq . >${configPath}10_ipv4_outbounds.json echoContent green " ---> 添加成功" elif [[ "${ipv6Status}" == "2" ]]; then unInstallRouting IPv6-out outboundTag unInstallOutbounds IPv6-out echoContent green " ---> IPv6分流卸载成功" else echoContent red " ---> 选择错误" exit 0 fi reloadCore } # bt下载管理 btTools() { if [[ -z "${configPath}" ]]; then echoContent red " ---> 未安装，请使用脚本安装" menu exit 0 fi echoContent skyBlue "\n功能 1/${totalProgress} : bt下载管理" echoContent red "\n==============================================================" if [[ -f ${configPath}09_routing.json ]] && grep -q bittorrent <${configPath}09_routing.json; then echoContent yellow "当前状态:已禁用" else echoContent yellow "当前状态:未禁用" fi echoContent yellow "1.禁用" echoContent yellow "2.打开" echoContent red "==============================================================" read -r -p "请选择:" btStatus if [[ "${btStatus}" == "1" ]]; then if [[ -f "${configPath}09_routing.json" ]]; then unInstallRouting blackhole-out outboundTag routing=$(jq -r '.routing.rules += [{"type":"field","outboundTag":"blackhole-out","protocol":["bittorrent"]}]' ${configPath}09_routing.json) echo "${routing}" | jq . >${configPath}09_routing.json else cat <${configPath}09_routing.json { "routing":{ "domainStrategy": "IPOnDemand", "rules": [ { "type": "field", "outboundTag": "blackhole-out", "protocol": [ "bittorrent" ] } ] } } EOF fi installSniffing unInstallOutbounds blackhole-out outbounds=$(jq -r '.outbounds += [{"protocol":"blackhole","tag":"blackhole-out"}]' ${configPath}10_ipv4_outbounds.json) echo "${outbounds}" | jq . >${configPath}10_ipv4_outbounds.json echoContent green " ---> BT下载禁用成功" elif [[ "${btStatus}" == "2" ]]; then unInstallSniffing unInstallRouting blackhole-out outboundTag bittorrent # unInstallOutbounds blackhole-out echoContent green " ---> BT下载打开成功" else echoContent red " ---> 选择错误" exit 0 fi reloadCore } # 域名黑名单 blacklist() { if [[ -z "${configPath}" ]]; then echoContent red " ---> 未安装，请使用脚本安装" menu exit 0 fi echoContent skyBlue "\n进度 $1/${totalProgress} : 域名黑名单" echoContent red "\n==============================================================" echoContent yellow "1.添加域名" echoContent yellow "2.删除黑名单" echoContent red "==============================================================" read -r -p "请选择:" blacklistStatus if [[ "${blacklistStatus}" == "1" ]]; then echoContent red "==============================================================" echoContent yellow "# 注意事项\n" echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]" echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]" echoContent yellow "3.如内核启动失败请检查域名后重新添加域名" echoContent yellow "4.不允许有特殊字符，注意逗号的格式" echoContent yellow "5.每次添加都是重新添加，不会保留上次域名" echoContent yellow "6.录入示例:speedtest,facebook\n" read -r -p "请按照上面示例录入域名:" domainList if [[ -f "${configPath}09_routing.json" ]]; then unInstallRouting blackhole-out outboundTag routing=$(jq -r ".routing.rules += [{\"type\":\"field\",\"domain\":[\"geosite:${domainList//,/\",\"geosite:}\"],\"outboundTag\":\"blackhole-out\"}]" ${configPath}09_routing.json) echo "${routing}" | jq . >${configPath}09_routing.json else cat <${configPath}09_routing.json { "routing":{ "domainStrategy": "IPOnDemand", "rules": [ { "type": "field", "domain": [ "geosite:${domainList//,/\",\"geosite:}" ], "outboundTag": "blackhole-out" } ] } } EOF fi echoContent green " ---> 添加成功" elif [[ "${blacklistStatus}" == "2" ]]; then unInstallRouting blackhole-out outboundTag echoContent green " ---> 域名黑名单删除成功" else echoContent red " ---> 选择错误" exit 0 fi reloadCore } # 根据tag卸载Routing unInstallRouting() { local tag=$1 local type=$2 local protocol=$3 if [[ -f "${configPath}09_routing.json" ]]; then local routing if grep -q "${tag}" ${configPath}09_routing.json && grep -q "${type}" ${configPath}09_routing.json; then jq -c .routing.rules[] ${configPath}09_routing.json | while read -r line; do local index=$((index + 1)) local delStatus=0 if [[ "${type}" == "outboundTag" ]] && echo "${line}" | jq .outboundTag | grep -q "${tag}"; then delStatus=1 elif [[ "${type}" == "inboundTag" ]] && echo "${line}" | jq .inboundTag | grep -q "${tag}"; then delStatus=1 fi if [[ -n ${protocol} ]] && echo "${line}" | jq .protocol | grep -q "${protocol}"; then delStatus=1 elif [[ -z ${protocol} ]] && [[ $(echo "${line}" | jq .protocol) != "null" ]]; then delStatus=0 fi if [[ ${delStatus} == 1 ]]; then routing=$(jq -r 'del(.routing.rules['"$(("${index}" - 1))"'])' ${configPath}09_routing.json) echo "${routing}" | jq . >${configPath}09_routing.json fi done fi fi } # 根据tag卸载出站 unInstallOutbounds() { local tag=$1 if grep -q "${tag}" ${configPath}10_ipv4_outbounds.json; then local ipv6OutIndex ipv6OutIndex=$(jq .outbounds[].tag ${configPath}10_ipv4_outbounds.json | awk '{print ""NR""":"$0}' | grep "${tag}" | awk -F "[:]" '{print $1}' | head -1) if [[ ${ipv6OutIndex} -gt 0 ]]; then routing=$(jq -r 'del(.outbounds['$(("${ipv6OutIndex}" - 1))'])' ${configPath}10_ipv4_outbounds.json) echo "${routing}" | jq . >${configPath}10_ipv4_outbounds.json fi fi } # 卸载嗅探 unInstallSniffing() { find ${configPath} -name "*inbounds.json*" | awk -F "[c][o][n][f][/]" '{print $2}' | while read -r inbound; do sniffing=$(jq -r 'del(.inbounds[0].sniffing)' "${configPath}${inbound}") echo "${sniffing}" | jq . >"${configPath}${inbound}" done } # 安装嗅探 installSniffing() { find ${configPath} -name "*inbounds.json*" | awk -F "[c][o][n][f][/]" '{print $2}' | while read -r inbound; do sniffing=$(jq -r '.inbounds[0].sniffing = {"enabled":true,"destOverride":["http","tls"]}' "${configPath}${inbound}") echo "${sniffing}" | jq . >"${configPath}${inbound}" done } # warp分流 warpRouting() { echoContent skyBlue "\n进度 $1/${totalProgress} : WARP分流" echoContent red "==============================================================" # echoContent yellow "# 注意事项\n" # echoContent yellow "1.官方warp经过几轮测试有bug，重启会导致warp失效，并且无法启动，也有可能CPU使用率暴涨" # echoContent yellow "2.不重启机器可正常使用，如果非要使用官方warp，建议不重启机器" # echoContent yellow "3.有的机器重启后仍正常使用" # echoContent yellow "4.重启后无法使用，也可卸载重新安装" # 安装warp if [[ -z $(which warp-cli) ]]; then echo read -r -p "WARP未安装，是否安装 ？[y/n]:" installCloudflareWarpStatus if [[ "${installCloudflareWarpStatus}" == "y" ]]; then installWarp else echoContent yellow " ---> 放弃安装" exit 0 fi fi echoContent red "\n==============================================================" echoContent yellow "1.添加域名" echoContent yellow "2.卸载WARP分流" echoContent red "==============================================================" read -r -p "请选择:" warpStatus if [[ "${warpStatus}" == "1" ]]; then echoContent red "==============================================================" echoContent yellow "# 注意事项\n" echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]" echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]" echoContent yellow "3.只可以把流量分流给warp，不可指定是ipv4或者ipv6" echoContent yellow "4.如内核启动失败请检查域名后重新添加域名" echoContent yellow "5.不允许有特殊字符，注意逗号的格式" echoContent yellow "6.每次添加都是重新添加，不会保留上次域名" echoContent yellow "7.录入示例:google,youtube,facebook\n" read -r -p "请按照上面示例录入域名:" domainList if [[ -f "${configPath}09_routing.json" ]]; then unInstallRouting warp-socks-out outboundTag routing=$(jq -r ".routing.rules += [{\"type\":\"field\",\"domain\":[\"geosite:${domainList//,/\",\"geosite:}\"],\"outboundTag\":\"warp-socks-out\"}]" ${configPath}09_routing.json) echo "${routing}" | jq . >${configPath}09_routing.json else cat <${configPath}09_routing.json { "routing":{ "domainStrategy": "IPOnDemand", "rules": [ { "type": "field", "domain": [ "geosite:${domainList//,/\",\"geosite:}" ], "outboundTag": "warp-socks-out" } ] } } EOF fi unInstallOutbounds warp-socks-out local outbounds outbounds=$(jq -r '.outbounds += [{"protocol":"socks","settings":{"servers":[{"address":"127.0.0.1","port":31303}]},"tag":"warp-socks-out"}]' ${configPath}10_ipv4_outbounds.json) echo "${outbounds}" | jq . >${configPath}10_ipv4_outbounds.json echoContent green " ---> 添加成功" elif [[ "${warpStatus}" == "2" ]]; then ${removeType} cloudflare-warp >/dev/null 2>&1 unInstallRouting warp-socks-out outboundTag unInstallOutbounds warp-socks-out echoContent green " ---> WARP分流卸载成功" else echoContent red " ---> 选择错误" exit 0 fi reloadCore } # 流媒体工具箱 streamingToolbox() { echoContent skyBlue "\n功能 1/${totalProgress} : 流媒体工具箱" echoContent red "\n==============================================================" # echoContent yellow "1.Netflix检测" echoContent yellow "1.任意门落地机解锁流媒体" echoContent yellow "2.DNS解锁流媒体" echoContent yellow "3.VMess+WS+TLS解锁流媒体" read -r -p "请选择:" selectType case ${selectType} in 1) dokodemoDoorUnblockStreamingMedia ;; 2) dnsUnlockNetflix ;; 3) unblockVMessWSTLSStreamingMedia ;; esac } # 任意门解锁流媒体 dokodemoDoorUnblockStreamingMedia() { echoContent skyBlue "\n功能 1/${totalProgress} : 任意门落地机解锁流媒体" echoContent red "\n==============================================================" echoContent yellow "# 注意事项" echoContent yellow "任意门解锁详解，请查看此文章[https://github.com/mack-a/v2ray-agent/blob/master/documents/netflix/dokodemo-unblock_netflix.md]\n" echoContent yellow "1.添加出站" echoContent yellow "2.添加入站" echoContent yellow "3.卸载" read -r -p "请选择:" selectType case ${selectType} in 1) setDokodemoDoorUnblockStreamingMediaOutbounds ;; 2) setDokodemoDoorUnblockStreamingMediaInbounds ;; 3) removeDokodemoDoorUnblockStreamingMedia ;; esac } # VMess+WS+TLS 出战解锁流媒体【仅出站】 unblockVMessWSTLSStreamingMedia() { echoContent skyBlue "\n功能 1/${totalProgress} : VMess+WS+TLS 出站解锁流媒体" echoContent red "\n==============================================================" echoContent yellow "# 注意事项" echoContent yellow "适合通过其他服务商提供的VMess解锁服务\n" echoContent yellow "1.添加出站" echoContent yellow "2.卸载" read -r -p "请选择:" selectType case ${selectType} in 1) setVMessWSTLSUnblockStreamingMediaOutbounds ;; 2) removeVMessWSTLSUnblockStreamingMedia ;; esac } # 设置VMess+WS+TLS解锁Netflix【仅出站】 setVMessWSTLSUnblockStreamingMediaOutbounds() { read -r -p "请输入解锁流媒体VMess+WS+TLS的地址:" setVMessWSTLSAddress echoContent red "==============================================================" echoContent yellow "# 注意事项\n" echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]" echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]" echoContent yellow "3.如内核启动失败请检查域名后重新添加域名" echoContent yellow "4.不允许有特殊字符，注意逗号的格式" echoContent yellow "5.每次添加都是重新添加，不会保留上次域名" echoContent yellow "6.录入示例:netflix,disney,hulu\n" read -r -p "请按照上面示例录入域名:" domainList if [[ -z ${domainList} ]]; then echoContent red " ---> 域名不可为空" setVMessWSTLSUnblockStreamingMediaOutbounds fi if [[ -n "${setVMessWSTLSAddress}" ]]; then unInstallOutbounds VMess-out echo read -r -p "请输入VMess+WS+TLS的端口:" setVMessWSTLSPort echo if [[ -z "${setVMessWSTLSPort}" ]]; then echoContent red " ---> 端口不可为空" fi read -r -p "请输入VMess+WS+TLS的UUID:" setVMessWSTLSUUID echo if [[ -z "${setVMessWSTLSUUID}" ]]; then echoContent red " ---> UUID不可为空" fi read -r -p "请输入VMess+WS+TLS的Path路径:" setVMessWSTLSPath echo if [[ -z "${setVMessWSTLSPath}" ]]; then echoContent red " ---> 路径不可为空" fi outbounds=$(jq -r ".outbounds += [{\"tag\":\"VMess-out\",\"protocol\":\"vmess\",\"streamSettings\":{\"network\":\"ws\",\"security\":\"tls\",\"tlsSettings\":{\"allowInsecure\":false},\"wsSettings\":{\"path\":\"${setVMessWSTLSPath}\"}},\"mux\":{\"enabled\":true,\"concurrency\":8},\"settings\":{\"vnext\":[{\"address\":\"${setVMessWSTLSAddress}\",\"port\":${setVMessWSTLSPort},\"users\":[{\"id\":\"${setVMessWSTLSUUID}\",\"security\":\"auto\",\"alterId\":0}]}]}}]" ${configPath}10_ipv4_outbounds.json) echo "${outbounds}" | jq . >${configPath}10_ipv4_outbounds.json if [[ -f "${configPath}09_routing.json" ]]; then unInstallRouting VMess-out outboundTag local routing routing=$(jq -r ".routing.rules += [{\"type\":\"field\",\"domain\":[\"ip.sb\",\"geosite:${domainList//,/\",\"geosite:}\"],\"outboundTag\":\"VMess-out\"}]" ${configPath}09_routing.json) echo "${routing}" | jq . >${configPath}09_routing.json else cat <${configPath}09_routing.json { "routing": { "rules": [ { "type": "field", "domain": [ "ip.sb", "geosite:${domainList//,/\",\"geosite:}" ], "outboundTag": "VMess-out" } ] } } EOF fi reloadCore echoContent green " ---> 添加出站解锁成功" exit 0 fi echoContent red " ---> 地址不可为空" setVMessWSTLSUnblockStreamingMediaOutbounds } # 设置任意门解锁Netflix【出站】 setDokodemoDoorUnblockStreamingMediaOutbounds() { read -r -p "请输入解锁流媒体 vps的IP:" setIP echoContent red "==============================================================" echoContent yellow "# 注意事项\n" echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]" echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]" echoContent yellow "3.如内核启动失败请检查域名后重新添加域名" echoContent yellow "4.不允许有特殊字符，注意逗号的格式" echoContent yellow "5.每次添加都是重新添加，不会保留上次域名" echoContent yellow "6.录入示例:netflix,disney,hulu\n" read -r -p "请按照上面示例录入域名:" domainList if [[ -z ${domainList} ]]; then echoContent red " ---> 域名不可为空" setDokodemoDoorUnblockStreamingMediaOutbounds fi if [[ -n "${setIP}" ]]; then unInstallOutbounds streamingMedia-80 unInstallOutbounds streamingMedia-443 outbounds=$(jq -r ".outbounds += [{\"tag\":\"streamingMedia-80\",\"protocol\":\"freedom\",\"settings\":{\"domainStrategy\":\"AsIs\",\"redirect\":\"${setIP}:22387\"}},{\"tag\":\"streamingMedia-443\",\"protocol\":\"freedom\",\"settings\":{\"domainStrategy\":\"AsIs\",\"redirect\":\"${setIP}:22388\"}}]" ${configPath}10_ipv4_outbounds.json) echo "${outbounds}" | jq . >${configPath}10_ipv4_outbounds.json if [[ -f "${configPath}09_routing.json" ]]; then unInstallRouting streamingMedia-80 outboundTag unInstallRouting streamingMedia-443 outboundTag local routing routing=$(jq -r ".routing.rules += [{\"type\":\"field\",\"port\":80,\"domain\":[\"ip.sb\",\"geosite:${domainList//,/\",\"geosite:}\"],\"outboundTag\":\"streamingMedia-80\"},{\"type\":\"field\",\"port\":443,\"domain\":[\"ip.sb\",\"geosite:${domainList//,/\",\"geosite:}\"],\"outboundTag\":\"streamingMedia-443\"}]" ${configPath}09_routing.json) echo "${routing}" | jq . >${configPath}09_routing.json else cat <${configPath}09_routing.json { "routing": { "domainStrategy": "AsIs", "rules": [ { "type": "field", "port": 80, "domain": [ "ip.sb", "geosite:${domainList//,/\",\"geosite:}" ], "outboundTag": "streamingMedia-80" }, { "type": "field", "port": 443, "domain": [ "ip.sb", "geosite:${domainList//,/\",\"geosite:}" ], "outboundTag": "streamingMedia-443" } ] } } EOF fi reloadCore echoContent green " ---> 添加出站解锁成功" exit 0 fi echoContent red " ---> ip不可为空" } # 设置任意门解锁Netflix【入站】 setDokodemoDoorUnblockStreamingMediaInbounds() { echoContent skyBlue "\n功能 1/${totalProgress} : 任意门添加入站" echoContent red "\n==============================================================" echoContent yellow "# 注意事项\n" echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]" echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]" echoContent yellow "3.如内核启动失败请检查域名后重新添加域名" echoContent yellow "4.不允许有特殊字符，注意逗号的格式" echoContent yellow "5.每次添加都是重新添加，不会保留上次域名" echoContent yellow "6.ip录入示例:1.1.1.1,1.1.1.2" echoContent yellow "7.下面的域名一定要和出站的vps一致" # echoContent yellow "8.如有防火墙请手动开启22387、22388端口" echoContent yellow "8.域名录入示例:netflix,disney,hulu\n" read -r -p "请输入允许访问该解锁 vps的IP:" setIPs if [[ -n "${setIPs}" ]]; then read -r -p "请按照上面示例录入域名:" domainList allowPort 22387 allowPort 22388 cat <${configPath}01_netflix_inbounds.json { "inbounds": [ { "listen": "0.0.0.0", "port": 22387, "protocol": "dokodemo-door", "settings": { "address": "0.0.0.0", "port": 80, "network": "tcp", "followRedirect": false }, "sniffing": { "enabled": true, "destOverride": [ "http" ] }, "tag": "streamingMedia-80" }, { "listen": "0.0.0.0", "port": 22388, "protocol": "dokodemo-door", "settings": { "address": "0.0.0.0", "port": 443, "network": "tcp", "followRedirect": false }, "sniffing": { "enabled": true, "destOverride": [ "tls" ] }, "tag": "streamingMedia-443" } ] } EOF cat <${configPath}10_ipv4_outbounds.json { "outbounds":[ { "protocol":"freedom", "settings":{ "domainStrategy":"UseIPv4" }, "tag":"IPv4-out" }, { "protocol":"freedom", "settings":{ "domainStrategy":"UseIPv6" }, "tag":"IPv6-out" }, { "protocol":"blackhole", "tag":"blackhole-out" } ] } EOF if [[ -f "${configPath}09_routing.json" ]]; then unInstallRouting streamingMedia-80 inboundTag unInstallRouting streamingMedia-443 inboundTag local routing routing=$(jq -r ".routing.rules += [{\"source\":[\"${setIPs//,/\",\"}\"],\"type\":\"field\",\"inboundTag\":[\"streamingMedia-80\",\"streamingMedia-443\"],\"outboundTag\":\"direct\"},{\"domains\":[\"geosite:${domainList//,/\",\"geosite:}\"],\"type\":\"field\",\"inboundTag\":[\"streamingMedia-80\",\"streamingMedia-443\"],\"outboundTag\":\"blackhole-out\"}]" ${configPath}09_routing.json) echo "${routing}" | jq . >${configPath}09_routing.json else cat <${configPath}09_routing.json { "routing": { "rules": [ { "source": [ "${setIPs//,/\",\"}" ], "type": "field", "inboundTag": [ "streamingMedia-80", "streamingMedia-443" ], "outboundTag": "direct" }, { "domains": [ "geosite:${domainList//,/\",\"geosite:}" ], "type": "field", "inboundTag": [ "streamingMedia-80", "streamingMedia-443" ], "outboundTag": "blackhole-out" } ] } } EOF fi reloadCore echoContent green " ---> 添加落地机入站解锁成功" exit 0 fi echoContent red " ---> ip不可为空" } # 移除任意门解锁Netflix removeDokodemoDoorUnblockStreamingMedia() { unInstallOutbounds streamingMedia-80 unInstallOutbounds streamingMedia-443 unInstallRouting streamingMedia-80 inboundTag unInstallRouting streamingMedia-443 inboundTag unInstallRouting streamingMedia-80 outboundTag unInstallRouting streamingMedia-443 outboundTag rm -rf ${configPath}01_netflix_inbounds.json reloadCore echoContent green " ---> 卸载成功" } # 移除VMess+WS+TLS解锁流媒体 removeVMessWSTLSUnblockStreamingMedia() { unInstallOutbounds VMess-out unInstallRouting VMess-out outboundTag reloadCore echoContent green " ---> 卸载成功" } # 重启核心 reloadCore() { if [[ "${coreInstallType}" == "1" ]]; then handleXray stop handleXray start elif [[ "${coreInstallType}" == "2" ]]; then handleV2Ray stop handleV2Ray start fi if [[ -n "${hysteriaConfigPath}" ]]; then handleHysteria stop handleHysteria start fi } # dns解锁Netflix dnsUnlockNetflix() { if [[ -z "${configPath}" ]]; then echoContent red " ---> 未安装，请使用脚本安装" menu exit 0 fi echoContent skyBlue "\n功能 1/${totalProgress} : DNS解锁流媒体" echoContent red "\n==============================================================" echoContent yellow "1.添加" echoContent yellow "2.卸载" read -r -p "请选择:" selectType case ${selectType} in 1) setUnlockDNS ;; 2) removeUnlockDNS ;; esac } # 设置dns setUnlockDNS() { read -r -p "请输入解锁流媒体DNS:" setDNS if [[ -n ${setDNS} ]]; then echoContent red "==============================================================" echoContent yellow "# 注意事项\n" echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]" echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]" echoContent yellow "3.如内核启动失败请检查域名后重新添加域名" echoContent yellow "4.不允许有特殊字符，注意逗号的格式" echoContent yellow "5.每次添加都是重新添加，不会保留上次域名" echoContent yellow "6.录入示例:netflix,disney,hulu" echoContent yellow "7.默认方案请输入1，默认方案包括以下内容" echoContent yellow "netflix,bahamut,hulu,hbo,disney,bbc,4chan,fox,abema,dmm,niconico,pixiv,bilibili,viu" read -r -p "请按照上面示例录入域名:" domainList if [[ "${domainList}" == "1" ]]; then cat <${configPath}11_dns.json { "dns": { "servers": [ { "address": "${setDNS}", "port": 53, "domains": [ "geosite:netflix", "geosite:bahamut", "geosite:hulu", "geosite:hbo", "geosite:disney", "geosite:bbc", "geosite:4chan", "geosite:fox", "geosite:abema", "geosite:dmm", "geosite:niconico", "geosite:pixiv", "geosite:bilibili", "geosite:viu" ] }, "localhost" ] } } EOF elif [[ -n "${domainList}" ]]; then cat <${configPath}11_dns.json { "dns": { "servers": [ { "address": "${setDNS}", "port": 53, "domains": [ "geosite:${domainList//,/\",\"geosite:}" ] }, "localhost" ] } } EOF fi reloadCore echoContent yellow "\n ---> 如还无法观看可以尝试以下两种方案" echoContent yellow " 1.重启vps" echoContent yellow " 2.卸载dns解锁后，修改本地的[/etc/resolv.conf]DNS设置并重启vps\n" else echoContent red " ---> dns不可为空" fi exit 0 } # 移除Netflix解锁 removeUnlockDNS() { cat <${configPath}11_dns.json { "dns": { "servers": [ "localhost" ] } } EOF reloadCore echoContent green " ---> 卸载成功" exit 0 } # v2ray-core个性化安装 customV2RayInstall() { echoContent skyBlue "\n========================个性化安装============================" echoContent yellow "VLESS前置，默认安装0，如果只需要安装0，则只选择0即可" echoContent yellow "0.VLESS+TLS/XTLS+TCP" echoContent yellow "1.VLESS+TLS+WS[CDN]" echoContent yellow "2.Trojan+TLS+gRPC[CDN]" echoContent yellow "3.VMess+TLS+WS[CDN]" echoContent yellow "4.Trojan" echoContent yellow "5.VLESS+TLS+gRPC[CDN]" read -r -p "请选择[多选]，[例如:123]:" selectCustomInstallType echoContent skyBlue "--------------------------------------------------------------" if [[ -z ${selectCustomInstallType} ]]; then selectCustomInstallType=0 fi if [[ "${selectCustomInstallType}" =~ ^[0-5]+$ ]]; then cleanUp xrayClean totalProgress=17 installTools 1 # 申请tls initTLSNginxConfig 2 installTLS 3 handleNginx stop # 随机path if echo ${selectCustomInstallType} | grep -q 1 || echo ${selectCustomInstallType} | grep -q 3 || echo ${selectCustomInstallType} | grep -q 4; then randomPathFunction 5 customCDNIP 6 fi nginxBlog 7 updateRedirectNginxConf handleNginx start # 安装V2Ray installV2Ray 8 installV2RayService 9 initV2RayConfig custom 10 cleanUp xrayDel installCronTLS 14 handleV2Ray stop handleV2Ray start # 生成账号 checkGFWStatue 15 showAccounts 16 else echoContent red " ---> 输入不合法" customV2RayInstall fi } # Xray-core个性化安装 customXrayInstall() { echoContent skyBlue "\n========================个性化安装============================" echoContent yellow "VLESS前置，默认安装0，如果只需要安装0，则只选择0即可" echoContent yellow "0.VLESS+TLS/XTLS+TCP" echoContent yellow "1.VLESS+TLS+WS[CDN]" echoContent yellow "2.Trojan+TLS+gRPC[CDN]" echoContent yellow "3.VMess+TLS+WS[CDN]" echoContent yellow "4.Trojan" echoContent yellow "5.VLESS+TLS+gRPC[CDN]" read -r -p "请选择[多选]，[例如:123]:" selectCustomInstallType echoContent skyBlue "--------------------------------------------------------------" if [[ -z ${selectCustomInstallType} ]]; then echoContent red " ---> 不可为空" customXrayInstall elif [[ "${selectCustomInstallType}" =~ ^[0-5]+$ ]]; then cleanUp v2rayClean totalProgress=17 installTools 1 # 申请tls initTLSNginxConfig 2 handleXray stop handleNginx start checkIP installTLS 3 handleNginx stop # 随机path if echo "${selectCustomInstallType}" | grep -q 1 || echo "${selectCustomInstallType}" | grep -q 2 || echo "${selectCustomInstallType}" | grep -q 3 || echo "${selectCustomInstallType}" | grep -q 5; then randomPathFunction 5 customCDNIP 6 fi nginxBlog 7 updateRedirectNginxConf handleNginx start # 安装V2Ray installXray 8 installXrayService 9 initXrayConfig custom 10 cleanUp v2rayDel installCronTLS 14 handleXray stop handleXray start # 生成账号 checkGFWStatue 15 showAccounts 16 else echoContent red " ---> 输入不合法" customXrayInstall fi } # 选择核心安装---v2ray-core、xray-core selectCoreInstall() { echoContent skyBlue "\n功能 1/${totalProgress} : 选择核心安装" echoContent red "\n==============================================================" echoContent yellow "1.Xray-core" echoContent yellow "2.v2ray-core" echoContent red "==============================================================" read -r -p "请选择:" selectCoreType case ${selectCoreType} in 1) if [[ "${selectInstallType}" == "2" ]]; then customXrayInstall else xrayCoreInstall fi ;; 2) v2rayCoreVersion= if [[ "${selectInstallType}" == "2" ]]; then customV2RayInstall else v2rayCoreInstall fi ;; 3) v2rayCoreVersion=v4.32.1 if [[ "${selectInstallType}" == "2" ]]; then customV2RayInstall else v2rayCoreInstall fi ;; *) echoContent red ' ---> 选择错误，重新选择' selectCoreInstall ;; esac } # v2ray-core 安装 v2rayCoreInstall() { cleanUp xrayClean selectCustomInstallType= totalProgress=13 installTools 2 # 申请tls initTLSNginxConfig 3 handleV2Ray stop handleNginx start checkIP installTLS 4 handleNginx stop # initNginxConfig 5 randomPathFunction 5 # 安装V2Ray installV2Ray 6 installV2RayService 7 customCDNIP 8 initV2RayConfig all 9 cleanUp xrayDel installCronTLS 10 nginxBlog 11 updateRedirectNginxConf handleV2Ray stop sleep 2 handleV2Ray start handleNginx start # 生成账号 checkGFWStatue 12 showAccounts 13 } # xray-core 安装 xrayCoreInstall() { cleanUp v2rayClean selectCustomInstallType= totalProgress=13 installTools 2 # 申请tls initTLSNginxConfig 3 handleXray stop handleNginx start checkIP installTLS 4 handleNginx stop randomPathFunction 5 # 安装Xray # handleV2Ray stop installXray 6 installXrayService 7 customCDNIP 8 initXrayConfig all 9 cleanUp v2rayDel installCronTLS 10 nginxBlog 11 updateRedirectNginxConf handleXray stop sleep 2 handleXray start handleNginx start # 生成账号 checkGFWStatue 12 showAccounts 13 } # Hysteria安装 hysteriaCoreInstall() { if [[ -z "${coreInstallType}" ]]; then echoContent red "\n ---> 由于环境依赖，如安装hysteria，请先安装Xray/V2ray" menu exit 0 fi totalProgress=5 installHysteria 1 initHysteriaConfig 2 installHysteriaService 3 handleHysteria stop handleHysteria start showAccounts 5 } # 卸载 hysteria unInstallHysteriaCore() { if [[ -z "${hysteriaConfigPath}" ]]; then echoContent red "\n ---> 未安装" exit 0 fi handleHysteria stop rm -rf /etc/v2ray-agent/hysteria/* rm -rf /etc/systemd/system/hysteria.service echoContent green " ---> 卸载完成" } # 核心管理 coreVersionManageMenu() { if [[ -z "${coreInstallType}" ]]; then echoContent red "\n ---> 没有检测到安装目录，请执行脚本安装内容" menu exit 0 fi if [[ "${coreInstallType}" == "1" ]]; then xrayVersionManageMenu 1 elif [[ "${coreInstallType}" == "2" ]]; then v2rayCoreVersion= v2rayVersionManageMenu 1 fi } # 定时任务检查证书 cronRenewTLS() { if [[ "${renewTLS}" == "RenewTLS" ]]; then renewalTLS exit 0 fi } # 账号管理 manageAccount() { echoContent skyBlue "\n功能 1/${totalProgress} : 账号管理" echoContent red "\n==============================================================" echoContent yellow "# 每次删除、添加账号后，需要重新查看订阅生成订阅" echoContent yellow "# 如安装了Hysteria，账号会同时添加到Hysteria\n" echoContent yellow "1.查看账号" echoContent yellow "2.查看订阅" echoContent yellow "3.添加用户" echoContent yellow "4.删除用户" echoContent red "==============================================================" read -r -p "请输入:" manageAccountStatus if [[ "${manageAccountStatus}" == "1" ]]; then showAccounts 1 elif [[ "${manageAccountStatus}" == "2" ]]; then subscribe 1 elif [[ "${manageAccountStatus}" == "3" ]]; then addUser elif [[ "${manageAccountStatus}" == "4" ]]; then removeUser else echoContent red " ---> 选择错误" fi } # 订阅 subscribe() { if [[ -n "${configPath}" ]]; then echoContent skyBlue "-------------------------备注---------------------------------" echoContent yellow "# 查看订阅时会重新生成订阅" echoContent yellow "# 每次添加、删除账号需要重新查看订阅" rm -rf /etc/v2ray-agent/subscribe/* rm -rf /etc/v2ray-agent/subscribe_tmp/* showAccounts >/dev/null mv /etc/v2ray-agent/subscribe_tmp/* /etc/v2ray-agent/subscribe/ if [[ -n $(ls /etc/v2ray-agent/subscribe/) ]]; then find /etc/v2ray-agent/subscribe/* | while read -r email; do email=$(echo "${email}" | awk -F "[b][e][/]" '{print $2}') local base64Result base64Result=$(base64 -w 0 "/etc/v2ray-agent/subscribe/${email}") echo "${base64Result}" >"/etc/v2ray-agent/subscribe/${email}" echoContent skyBlue "--------------------------------------------------------------" echoContent yellow "email:${email}\n" local currentDomain=${currentHost} if [[ -n "${currentDefaultPort}" && "${currentDefaultPort}" != "443" ]]; then currentDomain="${currentHost}:${currentDefaultPort}" fi echoContent yellow "url:https://${currentDomain}/s/${email}\n" echoContent yellow "在线二维码:https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=https://${currentDomain}/s/${email}\n" echo "https://${currentDomain}/s/${email}" | qrencode -s 10 -m 1 -t UTF8 echoContent skyBlue "--------------------------------------------------------------" done fi else echoContent red " ---> 未安装" fi } # 切换alpn switchAlpn() { echoContent skyBlue "\n功能 1/${totalProgress} : 切换alpn" if [[ -z ${currentAlpn} ]]; then echoContent red " ---> 无法读取alpn，请检查是否安装" exit 0 fi echoContent red "\n==============================================================" echoContent green "当前alpn首位为:${currentAlpn}" echoContent yellow " 1.当http/1.1首位时，trojan可用，gRPC部分客户端可用【客户端支持手动选择alpn的可用】" echoContent yellow " 2.当h2首位时，gRPC可用，trojan部分客户端可用【客户端支持手动选择alpn的可用】" echoContent yellow " 3.如客户端不支持手动更换alpn，建议使用此功能更改服务端alpn顺序，来使用相应的协议" echoContent red "==============================================================" if [[ "${currentAlpn}" == "http/1.1" ]]; then echoContent yellow "1.切换alpn h2 首位" elif [[ "${currentAlpn}" == "h2" ]]; then echoContent yellow "1.切换alpn http/1.1 首位" else echoContent red '不符合' fi echoContent red "==============================================================" read -r -p "请选择:" selectSwitchAlpnType if [[ "${selectSwitchAlpnType}" == "1" && "${currentAlpn}" == "http/1.1" ]]; then local frontingTypeJSON frontingTypeJSON=$(jq -r ".inbounds[0].streamSettings.tlsSettings.alpn = [\"h2\",\"http/1.1\"]" ${configPath}${frontingType}.json) echo "${frontingTypeJSON}" | jq . >${configPath}${frontingType}.json elif [[ "${selectSwitchAlpnType}" == "1" && "${currentAlpn}" == "h2" ]]; then local frontingTypeJSON frontingTypeJSON=$(jq -r ".inbounds[0].streamSettings.tlsSettings.alpn =[\"http/1.1\",\"h2\"]" ${configPath}${frontingType}.json) echo "${frontingTypeJSON}" | jq . >${configPath}${frontingType}.json else echoContent red " ---> 选择错误" exit 0 fi reloadCore } # hysteria管理 manageHysteria() { echoContent skyBlue "\n进度 1/1 : Hysteria管理" echoContent red "\n==============================================================" local hysteriaStatus= if [[ -n "${hysteriaConfigPath}" ]]; then echoContent yellow "1.重新安装" echoContent yellow "2.卸载" echoContent yellow "3.更新core" echoContent yellow "4.查看日志" hysteriaStatus=true else echoContent yellow "1.安装" fi echoContent red "==============================================================" read -r -p "请选择:" installHysteriaStatus if [[ "${installHysteriaStatus}" == "1" ]]; then hysteriaCoreInstall elif [[ "${installHysteriaStatus}" == "2" && "${hysteriaStatus}" == "true" ]]; then unInstallHysteriaCore elif [[ "${installHysteriaStatus}" == "3" && "${hysteriaStatus}" == "true" ]]; then installHysteria 1 handleHysteria start elif [[ "${installHysteriaStatus}" == "4" && "${hysteriaStatus}" == "true" ]]; then journalctl -fu hysteria fi } # 主菜单 menu() { cd "$HOME" || exit echoContent red "\n==============================================================" echoContent green "作者:mack-a" echoContent green "当前版本:v2.6.16" echoContent green "Github:https://github.com/mack-a/v2ray-agent" echoContent green "描述:八合一共存脚本\c" showInstallStatus echoContent red "\n==============================================================" echoContent red " 推广区 " echoContent green "AFF捐赠：https://github.com/mack-a/v2ray-agent/blob/master/documents/donation_aff.md\n" echoContent red "==============================================================" if [[ -n "${coreInstallType}" ]]; then echoContent yellow "1.重新安装" else echoContent yellow "1.安装" fi echoContent yellow "2.任意组合安装" if echo ${currentInstallProtocolType} | grep -q trojan; then echoContent yellow "3.切换VLESS[XTLS]" elif echo ${currentInstallProtocolType} | grep -q 0; then echoContent yellow "3.切换Trojan[XTLS]" fi echoContent yellow "4.Hysteria管理" echoContent skyBlue "-------------------------工具管理-----------------------------" echoContent yellow "5.账号管理" echoContent yellow "6.更换伪装站" echoContent yellow "7.更新证书" echoContent yellow "8.更换CDN节点" echoContent yellow "9.IPv6分流" echoContent yellow "10.WARP分流" echoContent yellow "11.流媒体工具" echoContent yellow "12.添加新端口" echoContent yellow "13.BT下载管理" echoContent yellow "14.切换alpn" echoContent yellow "15.域名黑名单" echoContent skyBlue "-------------------------版本管理-----------------------------" echoContent yellow "16.core管理" echoContent yellow "17.更新脚本" echoContent yellow "18.安装BBR、DD脚本" echoContent skyBlue "-------------------------脚本管理-----------------------------" echoContent yellow "19.查看日志" echoContent yellow "20.卸载脚本" echoContent red "==============================================================" mkdirTools aliasInstall read -r -p "请选择:" selectInstallType case ${selectInstallType} in 1) selectCoreInstall ;; 2) selectCoreInstall ;; 3) initXrayFrontingConfig 1 ;; 4) manageHysteria ;; 5) manageAccount 1 ;; 6) updateNginxBlog 1 ;; 7) renewalTLS 1 ;; 8) updateV2RayCDN 1 ;; 9) ipv6Routing 1 ;; 10) warpRouting 1 ;; 11) streamingToolbox 1 ;; 12) addCorePort 1 ;; 13) btTools 1 ;; 14) switchAlpn 1 ;; 15) blacklist 1 ;; 16) coreVersionManageMenu 1 ;; 17) updateV2RayAgent 1 ;; 18) bbrInstall ;; 19) checkLog 1 ;; 20) unInstall 1 ;; esac } cronRenewTLS menu