mindoc/Dockerfile

136 lines
6.0 KiB
Docker
Raw Blame History

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

FROM amd64/golang:1.13 AS build
ARG TAG=0.0.1
# 编译-环境变量
ENV GO111MODULE=on
ENV GOPROXY=https://goproxy.cn,direct
ENV CGO_ENABLED=1
ENV GOARCH=amd64
ENV GOOS=linux
# 工作目录
ADD . /go/src/github.com/mindoc-org/mindoc
WORKDIR /go/src/github.com/mindoc-org/mindoc
# 编译
RUN go env
RUN go mod tidy -v
RUN go build -o mindoc_linux_amd64 -ldflags "-w -s -X 'main.VERSION=$TAG' -X 'main.BUILD_TIME=`date`' -X 'main.GO_VERSION=`go version`'"
RUN cp conf/app.conf.example conf/app.conf
# 清理不需要的文件
RUN rm appveyor.yml docker-compose.yml Dockerfile .travis.yml .gitattributes .gitignore go.mod go.sum main.go README.md simsun.ttc start.sh conf/*.go
RUN rm -rf cache commands controllers converter .git .github graphics mail models routers utils
# 测试编译的mindoc是否ok
RUN ./mindoc_linux_amd64 version
# 必要的文件复制
ADD simsun.ttc /usr/share/fonts/win/
ADD start.sh /go/src/github.com/mindoc-org/mindoc
# Ubuntu 20.04
FROM ubuntu:focal
# 切换默认shell为bash
SHELL ["/bin/bash", "-c"]
COPY --from=build /usr/share/fonts/win/simsun.ttc /usr/share/fonts/win/
COPY --from=build /go/src/github.com/mindoc-org/mindoc /mindoc
WORKDIR /mindoc
RUN chmod a+r /usr/share/fonts/win/simsun.ttc
# 备份原有源
RUN mv /etc/apt/sources.list /etc/apt/sources.list-backup
# 最小化源缩短apt update时间(ca-certificates必须先安装才支持换tsinghua源)
RUN echo 'deb http://archive.ubuntu.com/ubuntu/ focal main restricted' > /etc/apt/sources.list
RUN apt-get update
RUN apt install -y ca-certificates
# 更换tsinghua源(echo多行内容不能以#开头会被docker误判为注释行所以采用\n#开头)
RUN echo $'\
\n# from: https://mirrors.tuna.tsinghua.edu.cn/help/ubuntu/\n\
deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ focal main restricted universe multiverse\
\n# deb-src https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ focal main restricted universe multiverse\n\
deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ focal-updates main restricted universe multiverse\
\n# deb-src https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ focal-updates main restricted universe multiverse\n\
deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ focal-backports main restricted universe multiverse\
\n# deb-src https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ focal-backports main restricted universe multiverse\n\
deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ focal-security main restricted universe multiverse\
\n# deb-src https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ focal-security main restricted universe multiverse\
\n# deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ focal-proposed main restricted universe multiverse\
\n# deb-src https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ focal-proposed main restricted universe multiverse'\
> /etc/apt/sources.list
# 更新软件包信息
RUN apt-get update
# 安装必要的系统工具
RUN apt install -y apt-transport-https ca-certificates curl wget xz-utils
# 时区设置(如果不设置, calibre依赖的tzdata在安装过程中会要求选择时区)
ENV TZ=Asia/Shanghai
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
# tzdata的前端类型默认为readlineShell情况下或dialog支持GUI的情况下
ARG DEBIAN_FRONTEND=noninteractive
# 安装时区信息
RUN apt install -y --no-install-recommends tzdata
# 重新配置tzdata软件包使得时区设置生效
RUN dpkg-reconfigure --frontend noninteractive tzdata
# 安装 calibre 依赖的包
RUN apt install -y libgl-dev libnss3-dev libxcomposite-dev libxrandr-dev libxi-dev
# 安装文泉驿字体
RUN apt install -y fonts-wqy-microhei fonts-wqy-zenhei
# 安装中文语言包
RUN apt-get install -y locales language-pack-zh-hans language-pack-zh-hans-base
# 设置默认编码
RUN locale-gen "zh_CN.UTF-8"
RUN update-locale LANG=zh_CN.UTF-8
ENV LANG=zh_CN.UTF-8
ENV LANGUAGE=zh_CN:en
ENV LC_ALL=zh_CN.UTF-8
# 安装-calibre
# RUN apt-get install -y calibre # 此种方式安装省事,但会安装很多额外不需要的软件包,导致体积过大
RUN mkdir -p /tmp/calibre-cache
# 获取最新版本号
RUN curl -s http://code.calibre-ebook.com/latest>/tmp/calibre-cache/version
# 下载最新版本
# RUN wget -O /tmp/calibre-cache/calibre-x86_64.txz -c https://download.calibre-ebook.com/`cat /tmp/calibre-cache/version`/calibre-`cat /tmp/calibre-cache/version`-x86_64.txz
RUN wget -O /tmp/calibre-cache/calibre-x86_64.txz -c https://github.com/kovidgoyal/calibre/releases/download/v`cat /tmp/calibre-cache/version`/calibre-`cat /tmp/calibre-cache/version`-x86_64.txz
# 注: 调试阶段下载alibre-5.22.1-x86_64.txz到本地(使用 python -m http.server),加速构建
# RUN wget -O /tmp/calibre-cache/calibre-x86_64.txz -c http://10.96.8.252:8000/calibre-5.22.1-x86_64.txz
# 解压
RUN mkdir -p /opt/calibre
# RUN tar --extract --file=/tmp/calibre-cache/calibre-x86_64.txz --directory /opt/calibre
RUN tar xJof /tmp/calibre-cache/calibre-x86_64.txz -C /opt/calibre
ENV PATH=$PATH:/opt/calibre
# 设置calibre相关环境变量
ENV QTWEBENGINE_CHROMIUM_FLAGS="--no-sandbox"
ENV QT_QPA_PLATFORM='offscreen'
# 测试 calibre 可正常使用
RUN ebook-convert --version
# 清理calibre缓存
RUN rm -rf /tmp/calibre-cache
# refer: https://docs.docker.com/engine/reference/builder/#volume
# 数据同步目录
VOLUME /mindoc-sync-host
# refer: https://docs.docker.com/engine/reference/builder/#expose
EXPOSE 8181/tcp
# 如果配置文件不存在就复制
RUN cp --no-clobber /mindoc/conf/app.conf.example /mindoc/conf/app.conf
ENV ZONEINFO=/mindoc/lib/time/zoneinfo.zip
RUN chmod +x /mindoc/start.sh
ENTRYPOINT ["/bin/bash", "/mindoc/start.sh"]
# https://docs.docker.com/engine/reference/commandline/build/#options
# docker build --progress plain --rm --build-arg TAG=2.0.1 --tag gsw945/mindoc:2.0.1 .
# https://docs.docker.com/engine/reference/commandline/run/#options
# set MINDOC=//d/mindoc # windows
# export MINDOC=/home/ubuntu/mindoc-docker # linux
# docker run --rm -it -p 8181:8181 -v "%MINDOC%":"/mindoc-sync-host" --name mindoc -e MINDOC_ENABLE_EXPORT=true -d gsw945/mindoc:2.0.1