kubernetes-handbook/practice/master-installation.md

305 lines
11 KiB
Markdown
Raw Normal View History

# 部署master节点
2017-04-14 17:39:40 +08:00
kubernetes master 节点包含的组件:
+ kube-apiserver
+ kube-scheduler
+ kube-controller-manager
目前这三个组件需要部署在同一台机器上。
+ `kube-scheduler`、`kube-controller-manager` 和 `kube-apiserver` 三者的功能紧密相关;
+ 同时只能有一个 `kube-scheduler`、`kube-controller-manager` 进程处于工作状态,如果运行多个,则需要通过选举产生一个 leader
2017-05-09 09:59:14 +08:00
~~本文档记录部署一个三个节点的高可用 kubernetes master 集群步骤。(后续创建一个 load balancer 来代理访问 kube-apiserver 的请求)~~
暂时未实现master节点的高可用。
2017-04-14 17:39:40 +08:00
## TLS 证书文件
pem和token.csv证书文件我们在[TLS证书和秘钥](./01-TLS证书和秘钥.md)这一步中已经创建过了。我们再检查一下。
``` bash
$ ls /etc/kubernetes/ssl
admin-key.pem admin.pem ca-key.pem ca.pem kube-proxy-key.pem kube-proxy.pem kubernetes-key.pem kubernetes.pem
```
## 下载最新版本的二进制文件
有两种下载方式
**方式一**
从 [github release 页面](https://github.com/kubernetes/kubernetes/releases) 下载发布版 tarball解压后再执行下载脚本
``` shell
wget https://github.com/kubernetes/kubernetes/releases/download/v1.6.0/kubernetes.tar.gz
tar -xzvf kubernetes.tar.gz
cd kubernetes
./cluster/get-kube-binaries.sh
2017-04-14 17:39:40 +08:00
```
**方式二**
从 [`CHANGELOG`页面](https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG.md) 下载 `client``server` tarball 文件
`server` 的 tarball `kubernetes-server-linux-amd64.tar.gz` 已经包含了 `client`(`kubectl`) 二进制文件,所以不用单独下载`kubernetes-client-linux-amd64.tar.gz`文件;
``` shell
# wget https://dl.k8s.io/v1.6.0/kubernetes-client-linux-amd64.tar.gz
wget https://dl.k8s.io/v1.6.0/kubernetes-server-linux-amd64.tar.gz
tar -xzvf kubernetes-server-linux-amd64.tar.gz
cd kubernetes
tar -xzvf kubernetes-src.tar.gz
2017-04-14 17:39:40 +08:00
```
将二进制文件拷贝到指定路径
``` bash
cp -r server/bin/{kube-apiserver,kube-controller-manager,kube-scheduler,kubectl,kube-proxy,kubelet} /usr/local/bin/
2017-04-14 17:39:40 +08:00
```
## 配置和启动 kube-apiserver
**创建 kube-apiserver的service配置文件**
serivce配置文件`/usr/lib/systemd/system/kube-apiserver.service`内容:
```ini
[Unit]
Description=Kubernetes API Service
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target
After=etcd.service
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/apiserver
2017-04-27 23:52:53 +08:00
ExecStart=/usr/local/bin/kube-apiserver \
2017-04-14 17:39:40 +08:00
$KUBE_LOGTOSTDERR \
$KUBE_LOG_LEVEL \
$KUBE_ETCD_SERVERS \
$KUBE_API_ADDRESS \
$KUBE_API_PORT \
$KUBELET_PORT \
$KUBE_ALLOW_PRIV \
$KUBE_SERVICE_ADDRESSES \
$KUBE_ADMISSION_CONTROL \
$KUBE_API_ARGS
Restart=on-failure
Type=notify
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
```
`/etc/kubernetes/config`文件的内容为:
```ini
###
# kubernetes system config
#
# The following values are used to configure various aspects of all
# kubernetes services, including
#
# kube-apiserver.service
# kube-controller-manager.service
# kube-scheduler.service
# kubelet.service
# kube-proxy.service
# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"
# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"
# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=true"
# How the controller-manager, scheduler, and proxy find the apiserver
#KUBE_MASTER="--master=http://sz-pg-oam-docker-test-001.tendcloud.com:8080"
KUBE_MASTER="--master=http://172.20.0.113:8080"
```
该配置文件同时被kube-apiserver、kube-controller-manager、kube-scheduler、kubelet、kube-proxy使用。
apiserver配置文件`/etc/kubernetes/apiserver`内容为:
``` Ini
###
## kubernetes system config
##
## The following values are used to configure the kube-apiserver
##
#
## The address on the local server to listen to.
#KUBE_API_ADDRESS="--insecure-bind-address=sz-pg-oam-docker-test-001.tendcloud.com"
KUBE_API_ADDRESS="--advertise-address=172.20.0.113 --bind-address=172.20.0.113 --insecure-bind-address=172.20.0.113"
#
## The port on the local server to listen on.
#KUBE_API_PORT="--port=8080"
#
## Port minions listen on
#KUBELET_PORT="--kubelet-port=10250"
#
## Comma separated list of nodes in the etcd cluster
2017-05-09 10:02:07 +08:00
KUBE_ETCD_SERVERS="--etcd-servers=https://172.20.0.113:2379,https://172.20.0.114:2379,https://172.20.0.115:2379"
2017-04-14 17:39:40 +08:00
#
## Address range to use for services
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"
#
## default admission control policies
KUBE_ADMISSION_CONTROL="--admission-control=ServiceAccount,NamespaceLifecycle,NamespaceExists,LimitRanger,ResourceQuota"
#
## Add your own!
KUBE_API_ARGS="--authorization-mode=RBAC --runtime-config=rbac.authorization.k8s.io/v1beta1 --kubelet-https=true --experimental-bootstrap-token-auth --token-auth-file=/etc/kubernetes/token.csv --service-node-port-range=30000-32767 --tls-cert-file=/etc/kubernetes/ssl/kubernetes.pem --tls-private-key-file=/etc/kubernetes/ssl/kubernetes-key.pem --client-ca-file=/etc/kubernetes/ssl/ca.pem --service-account-key-file=/etc/kubernetes/ssl/ca-key.pem --etcd-cafile=/etc/kubernetes/ssl/ca.pem --etcd-certfile=/etc/kubernetes/ssl/kubernetes.pem --etcd-keyfile=/etc/kubernetes/ssl/kubernetes-key.pem --enable-swagger-ui=true --apiserver-count=3 --audit-log-maxage=30 --audit-log-maxbackup=3 --audit-log-maxsize=100 --audit-log-path=/var/lib/audit.log --event-ttl=1h"
```
+ `--authorization-mode=RBAC` 指定在安全端口使用 RBAC 授权模式,拒绝未通过授权的请求;
+ kube-scheduler、kube-controller-manager 一般和 kube-apiserver 部署在同一台机器上,它们使用**非安全端口**和 kube-apiserver通信;
+ kubelet、kube-proxy、kubectl 部署在其它 Node 节点上,如果通过**安全端口**访问 kube-apiserver则必须先通过 TLS 证书认证,再通过 RBAC 授权;
+ kube-proxy、kubectl 通过在使用的证书里指定相关的 User、Group 来达到通过 RBAC 授权的目的;
+ 如果使用了 kubelet TLS Boostrap 机制,则不能再指定 `--kubelet-certificate-authority`、`--kubelet-client-certificate` 和 `--kubelet-client-key` 选项,否则后续 kube-apiserver 校验 kubelet 证书时出现 ”x509: certificate signed by unknown authority“ 错误;
+ `--admission-control` 值必须包含 `ServiceAccount`
+ `--bind-address` 不能为 `127.0.0.1`
+ `runtime-config`配置为`rbac.authorization.k8s.io/v1beta1`表示运行时的apiVersion
+ `--service-cluster-ip-range` 指定 Service Cluster IP 地址段,该地址段不能路由可达;
+ 缺省情况下 kubernetes 对象保存在 etcd `/registry` 路径下,可以通过 `--etcd-prefix` 参数进行调整;
2017-09-01 21:30:06 +08:00
完整 unit 见 [kube-apiserver.service](../systemd/kube-apiserver.service)
2017-04-14 17:39:40 +08:00
**启动kube-apiserver**
``` bash
systemctl daemon-reload
systemctl enable kube-apiserver
systemctl start kube-apiserver
systemctl status kube-apiserver
2017-04-14 17:39:40 +08:00
```
## 配置和启动 kube-controller-manager
**创建 kube-controller-manager的serivce配置文件**
文件路径`/usr/lib/systemd/system/kube-controller-manager.service`
```ini
[Unit]
2017-04-14 17:39:40 +08:00
Description=Kubernetes Controller Manager
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/controller-manager
2017-04-27 23:52:53 +08:00
ExecStart=/usr/local/bin/kube-controller-manager \
2017-04-14 17:39:40 +08:00
$KUBE_LOGTOSTDERR \
$KUBE_LOG_LEVEL \
$KUBE_MASTER \
$KUBE_CONTROLLER_MANAGER_ARGS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
```
配置文件`/etc/kubernetes/controller-manager`。
``` ini
###
# The following values are used to configure the kubernetes controller-manager
# defaults from config and apiserver should be adequate
# Add your own!
KUBE_CONTROLLER_MANAGER_ARGS="--address=127.0.0.1 --service-cluster-ip-range=10.254.0.0/16 --cluster-name=kubernetes --cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem --cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem --service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem --root-ca-file=/etc/kubernetes/ssl/ca.pem --leader-elect=true"
```
+ `--service-cluster-ip-range` 参数指定 Cluster 中 Service 的CIDR范围该网络在各 Node 间必须路由不可达,必须和 kube-apiserver 中的参数一致;
+ `--cluster-signing-*` 指定的证书和私钥文件用来签名为 TLS BootStrap 创建的证书和私钥;
+ `--root-ca-file` 用来对 kube-apiserver 证书进行校验,**指定该参数后才会在Pod 容器的 ServiceAccount 中放置该 CA 证书文件**
+ `--address` 值必须为 `127.0.0.1`,因为当前 kube-apiserver 期望 scheduler 和 controller-manager 在同一台机器,否则:
``` bash
$ kubectl get componentstatuses
NAME STATUS MESSAGE ERROR
scheduler Unhealthy Get http://127.0.0.1:10251/healthz: dial tcp 127.0.0.1:10251: getsockopt: connection refused
controller-manager Healthy ok
2017-05-09 10:02:07 +08:00
etcd-2 Healthy {"health": "true"}
2017-04-14 17:39:40 +08:00
etcd-0 Healthy {"health": "true"}
etcd-1 Healthy {"health": "true"}
```
2017-05-09 10:02:07 +08:00
如果有组件report unhealthy请参考https://github.com/kubernetes-incubator/bootkube/issues/64
2017-04-14 17:39:40 +08:00
2017-09-01 21:30:06 +08:00
完整 unit 见 [kube-controller-manager.service](../systemd/kube-controller-manager.service)
2017-04-14 17:39:40 +08:00
### 启动 kube-controller-manager
``` bash
systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl start kube-controller-manager
2017-04-14 17:39:40 +08:00
```
## 配置和启动 kube-scheduler
**创建 kube-scheduler的serivce配置文件**
2017-04-27 23:52:53 +08:00
文件路径`/usr/lib/systemd/system/kube-scheduler.service`。
2017-04-14 17:39:40 +08:00
```ini
[Unit]
Description=Kubernetes Scheduler Plugin
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/scheduler
2017-04-27 23:52:53 +08:00
ExecStart=/usr/local/bin/kube-scheduler \
2017-04-14 17:39:40 +08:00
$KUBE_LOGTOSTDERR \
$KUBE_LOG_LEVEL \
$KUBE_MASTER \
$KUBE_SCHEDULER_ARGS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
```
配置文件`/etc/kubernetes/scheduler`。
``` Ini
###
# kubernetes scheduler config
# default config should be adequate
# Add your own!
KUBE_SCHEDULER_ARGS="--leader-elect=true --address=127.0.0.1"
```
+ `--address` 值必须为 `127.0.0.1`,因为当前 kube-apiserver 期望 scheduler 和 controller-manager 在同一台机器;
2017-09-01 21:30:06 +08:00
完整 unit 见 [kube-scheduler.service](../systemd/kube-scheduler.service)
2017-04-14 17:39:40 +08:00
### 启动 kube-scheduler
``` bash
systemctl daemon-reload
systemctl enable kube-scheduler
systemctl start kube-scheduler
2017-04-14 17:39:40 +08:00
```
## 验证 master 节点功能
``` bash
$ kubectl get componentstatuses
NAME STATUS MESSAGE ERROR
scheduler Healthy ok
controller-manager Healthy ok
etcd-0 Healthy {"health": "true"}
etcd-1 Healthy {"health": "true"}
etcd-2 Healthy {"health": "true"}
```