rootsongjc
/
kubernetes-handbook
mirror of https://github.com/rootsongjc/kubernetes-handbook.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
kubernetes-handbook/concepts/flannel.md

395 lines
17 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

### Kubernetes中的网络解析——以flannel为例
我们当初使用[kubernetes-vagrant-centos-cluster](https://github.com/rootsongjc/kubernetes-vagrant-centos-cluster)安装了拥有三个节点的kubernetes集群，节点的状态如下所述。
```bash
[root@node1 ~]# kubectl get nodes -o wide
NAME STATUS ROLES AGE VERSION EXTERNAL-IP OS-IMAGE KERNEL-VERSION CONTAINER-RUNTIME
node1 Ready <none> 2d v1.9.1 <none> CentOS Linux 7 (Core) 3.10.0-693.11.6.el7.x86_64 docker://1.12.6
node2 Ready <none> 2d v1.9.1 <none> CentOS Linux 7 (Core) 3.10.0-693.11.6.el7.x86_64 docker://1.12.6
node3 Ready <none> 2d v1.9.1 <none> CentOS Linux 7 (Core) 3.10.0-693.11.6.el7.x86_64 docker://1.12.6
```
当前Kubernetes集群中运行的所有Pod信息：
```bash
[root@node1 ~]# kubectl get pods --all-namespaces -o wide
NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE
kube-system coredns-5984fb8cbb-sjqv9 1/1 Running 0 1h 172.33.68.2 node1
kube-system coredns-5984fb8cbb-tkfrc 1/1 Running 1 1h 172.33.96.3 node3
kube-system heapster-v1.5.0-684c7f9488-z6sdz 4/4 Running 0 1h 172.33.31.3 node2
kube-system kubernetes-dashboard-6b66b8b96c-mnm2c 1/1 Running 0 1h 172.33.31.2 node2
kube-system monitoring-influxdb-grafana-v4-54b7854697-tw9cd 2/2 Running 2 1h 172.33.96.2 node3
```
当前etcd中的注册的宿主机的pod地址网段信息：
```bash
[root@node1 ~]# etcdctl ls /kube-centos/network/subnets
/kube-centos/network/subnets/172.33.68.0-24
/kube-centos/network/subnets/172.33.31.0-24
/kube-centos/network/subnets/172.33.96.0-24
```
而每个node上的Pod子网是根据我们在安装flannel时配置来划分的，在etcd中查看该配置：
```bash
[root@node1 ~]# etcdctl get /kube-centos/network/config
{"Network":"172.33.0.0/16","SubnetLen":24,"Backend":{"Type":"host-gw"}}
```
我们知道Kubernetes集群内部存在三类IP，分别是：
- Node IP：宿主机的IP地址
- Pod IP：使用网络插件创建的IP（如flannel），使跨主机的Pod可以互通
- Cluster IP：虚拟IP，通过iptables规则访问服务
在安装node节点的时候，节点上的进程是按照flannel -> docker -> kubelet -> kube-proxy的顺序启动的，我们下面也会按照该顺序来讲解，flannel的网络划分和如何与docker交互，如何通过iptables访问service。
### Flannel
Flannel是作为一个二进制文件的方式部署在每个node上，主要实现两个功能：
- 为每个node分配subnet，容器将自动从该子网中获取IP地址
- 当有node加入到网络中时，为每个node增加路由配置
下面是使用`host-gw` backend的flannel网络架构图：
![flannel网络架构（图片来自openshift）](../images/flannel-networking.png)
**注意**：以上IP非本示例中的IP，但是不影响读者理解。
Node1上的flannel配置如下:
```bash
[root@node1 ~]# cat /usr/lib/systemd/system/flanneld.service
[Unit]
Description=Flanneld overlay address etcd agent
After=network.target
After=network-online.target
Wants=network-online.target
After=etcd.service
Before=docker.service
[Service]
Type=notify
EnvironmentFile=/etc/sysconfig/flanneld
EnvironmentFile=-/etc/sysconfig/docker-network
ExecStart=/usr/bin/flanneld-start $FLANNEL_OPTIONS
ExecStartPost=/usr/libexec/flannel/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/docker
Restart=on-failure
[Install]
WantedBy=multi-user.target
RequiredBy=docker.service
```
其中有两个环境变量文件的配置如下：
```bash
[root@node1 ~]# cat /etc/sysconfig/flanneld
# Flanneld configuration options
FLANNEL_ETCD_ENDPOINTS="http://172.17.8.101:2379"
FLANNEL_ETCD_PREFIX="/kube-centos/network"
FLANNEL_OPTIONS="-iface=eth2"
```
上面的配置文件仅供flanneld使用。
```bash
[root@node1 ~]# cat /etc/sysconfig/docker-network
# /etc/sysconfig/docker-network
DOCKER_NETWORK_OPTIONS=
```
还有一个`ExecStartPost=/usr/libexec/flannel/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/docker`，其中的`/usr/libexec/flannel/mk-docker-opts.sh`脚本是在flanneld启动后运行，将会生成两个环境变量配置文件：
- /run/flannel/docker
- /run/flannel/subnet.env
我们再来看下`/run/flannel/docker`的配置。
```bash
[root@node1 ~]# cat /run/flannel/docker
DOCKER_OPT_BIP="--bip=172.33.68.1/24"
DOCKER_OPT_IPMASQ="--ip-masq=true"
DOCKER_OPT_MTU="--mtu=1500"
DOCKER_NETWORK_OPTIONS=" --bip=172.33.68.1/24 --ip-masq=true --mtu=1500"
```
如果你使用`systemctl`命令先启动flannel后启动docker的话，docker将会读取以上环境变量。
我们再来看下`/run/flannel/subnet.env`的配置。
```bash
[root@node1 ~]# cat /run/flannel/subnet.env
FLANNEL_NETWORK=172.33.0.0/16
FLANNEL_SUBNET=172.33.68.1/24
FLANNEL_MTU=1500
FLANNEL_IPMASQ=false
```
以上环境变量是flannel向etcd中注册的。
### Docker
Node1的docker配置如下：
```bash
[root@node1 ~]# cat /usr/lib/systemd/system/docker.service
[Unit]
Description=Docker Application Container Engine
Documentation=http://docs.docker.com
After=network.target rhel-push-plugin.socket registries.service
Wants=docker-storage-setup.service
Requires=docker-cleanup.timer
[Service]
Type=notify
NotifyAccess=all
EnvironmentFile=-/run/containers/registries.conf
EnvironmentFile=-/etc/sysconfig/docker
EnvironmentFile=-/etc/sysconfig/docker-storage
EnvironmentFile=-/etc/sysconfig/docker-network
Environment=GOTRACEBACK=crash
Environment=DOCKER_HTTP_HOST_COMPAT=1
Environment=PATH=/usr/libexec/docker:/usr/bin:/usr/sbin
ExecStart=/usr/bin/dockerd-current \
--add-runtime docker-runc=/usr/libexec/docker/docker-runc-current \
--default-runtime=docker-runc \
--exec-opt native.cgroupdriver=systemd \
--userland-proxy-path=/usr/libexec/docker/docker-proxy-current \
$OPTIONS \
$DOCKER_STORAGE_OPTIONS \
$DOCKER_NETWORK_OPTIONS \
$ADD_REGISTRY \
$BLOCK_REGISTRY \
$INSECURE_REGISTRY\
$REGISTRIES
ExecReload=/bin/kill -s HUP $MAINPID
LimitNOFILE=1048576
LimitNPROC=1048576
LimitCORE=infinity
TimeoutStartSec=0
Restart=on-abnormal
MountFlags=slave
KillMode=process
[Install]
WantedBy=multi-user.target
```
查看Node1上的docker启动参数：
```bash
[root@node1 ~]# systemctl status -l docker
● docker.service - Docker Application Container Engine
Loaded: loaded (/usr/lib/systemd/system/docker.service; enabled; vendor preset: disabled)
Drop-In: /usr/lib/systemd/system/docker.service.d
└─flannel.conf
Active: active (running) since Fri 2018-02-02 22:52:43 CST; 2h 28min ago
Docs: http://docs.docker.com
Main PID: 4334 (dockerd-current)
CGroup: /system.slice/docker.service
‣ 4334 /usr/bin/dockerd-current --add-runtime docker-runc=/usr/libexec/docker/docker-runc-current --default-runtime=docker-runc --exec-opt native.cgroupdriver=systemd --userland-proxy-path=/usr/libexec/docker/docker-proxy-current --selinux-enabled --log-driver=journald --signature-verification=false --bip=172.33.68.1/24 --ip-masq=true --mtu=1500
```
我们可以看到在docker在启动时有如下参数：`--bip=172.33.68.1/24 --ip-masq=true --mtu=1500`。上述参数flannel启动时运行的脚本生成的，通过环境变量传递过来的。
我们查看下node1宿主机上的网络接口：
```bash
[root@node1 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 52:54:00:00:57:32 brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 brd 10.0.2.255 scope global dynamic eth0
valid_lft 85095sec preferred_lft 85095sec
inet6 fe80::5054:ff:fe00:5732/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:00:27:7b:0f:b1 brd ff:ff:ff:ff:ff:ff
inet 172.17.8.101/24 brd 172.17.8.255 scope global eth1
valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:00:27:ef:25:06 brd ff:ff:ff:ff:ff:ff
inet 172.30.113.231/21 brd 172.30.119.255 scope global dynamic eth2
valid_lft 85096sec preferred_lft 85096sec
inet6 fe80::a00:27ff:feef:2506/64 scope link
valid_lft forever preferred_lft forever
5: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 02:42:d0:ae:80:ea brd ff:ff:ff:ff:ff:ff
inet 172.33.68.1/24 scope global docker0
valid_lft forever preferred_lft forever
inet6 fe80::42:d0ff:feae:80ea/64 scope link
valid_lft forever preferred_lft forever
7: veth295bef2@if6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP
link/ether 6a:72:d7:9f:29:19 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 fe80::6872:d7ff:fe9f:2919/64 scope link
valid_lft forever preferred_lft forever
```
我们分类来解释下该虚拟机中的网络接口。
- lo：回环网络，127.0.0.1
- eth0：NAT网络，虚拟机创建时自动分配，仅可以在几台虚拟机之间访问
- eth1：bridge网络，使用vagrant分配给虚拟机的地址，虚拟机之间和本地电脑都可以访问
- eth2：bridge网络，使用DHCP分配，用于访问互联网的网卡
- docker0：bridge网络，docker默认使用的网卡，作为该节点上所有容器的虚拟交换机
- veth295bef2@if6：veth pair，连接docker0和Pod中的容器。veth pair可以理解为使用网线连接好的两个接口，把两个端口放到两个namespace中，那么这两个namespace就能打通。参考[linux 网络虚拟化： network namespace 简介](http://cizixs.com/2017/02/10/network-virtualization-network-namespace)。
我们再看下该节点的docker上有哪些网络。
```bash
[root@node1 ~]# docker network ls
NETWORK ID NAME DRIVER SCOPE
940bb75e653b bridge bridge local
d94c046e105d host host local
2db7597fd546 none null local
```
再检查下bridge网络`940bb75e653b`的信息。
```bash
[root@node1 ~]# docker network inspect 940bb75e653b
[
{
"Name": "bridge",
"Id": "940bb75e653bfa10dab4cce8813c2b3ce17501e4e4935f7dc13805a61b732d2c",
"Scope": "local",
"Driver": "bridge",
"EnableIPv6": false,
"IPAM": {
"Driver": "default",
"Options": null,
"Config": [
{
"Subnet": "172.33.68.1/24",
"Gateway": "172.33.68.1"
}
]
},
"Internal": false,
"Containers": {
"944d4aa660e30e1be9a18d30c9dcfa3b0504d1e5dbd00f3004b76582f1c9a85b": {
"Name": "k8s_POD_coredns-5984fb8cbb-sjqv9_kube-system_c5a2e959-082a-11e8-b4cd-525400005732_0",
"EndpointID": "7397d7282e464fc4ec5756d6b328df889cdf46134dbbe3753517e175d3844a85",
"MacAddress": "02:42:ac:21:44:02",
"IPv4Address": "172.33.68.2/24",
"IPv6Address": ""
}
},
"Options": {
"com.docker.network.bridge.default_bridge": "true",
"com.docker.network.bridge.enable_icc": "true",
"com.docker.network.bridge.enable_ip_masquerade": "true",
"com.docker.network.bridge.host_binding_ipv4": "0.0.0.0",
"com.docker.network.bridge.name": "docker0",
"com.docker.network.driver.mtu": "1500"
},
"Labels": {}
}
]
```
我们可以看到该网络中的`Config`与docker的启动配置相符。
Node1上运行的容器：
```bash
[root@node1 ~]# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
a37407a234dd docker.io/coredns/coredns@sha256:adf2e5b4504ef9ffa43f16010bd064273338759e92f6f616dd159115748799bc "/coredns -conf /etc/" About an hour ago Up About an hour k8s_coredns_coredns-5984fb8cbb-sjqv9_kube-system_c5a2e959-082a-11e8-b4cd-525400005732_0
944d4aa660e3 docker.io/openshift/origin-pod "/usr/bin/pod" About an hour ago Up About an hour k8s_POD_coredns-5984fb8cbb-sjqv9_kube-system_c5a2e959-082a-11e8-b4cd-525400005732_0
```
我们可以看到当前已经有2个容器在运行。
Node1上的路由信息：
```bash
[root@node1 ~]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0
0.0.0.0 172.30.116.1 0.0.0.0 UG 101 0 0 eth2
10.0.2.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0
172.17.8.0 0.0.0.0 255.255.255.0 U 100 0 0 eth1
172.30.112.0 0.0.0.0 255.255.248.0 U 100 0 0 eth2
172.33.68.0 0.0.0.0 255.255.255.0 U 0 0 0 docker0
172.33.96.0 172.30.118.65 255.255.255.0 UG 0 0 0 eth2
```
以上路由信息是由flannel添加的，当有新的节点加入到Kubernetes集群中后，每个节点上的路由表都将增加。
我们在node上来`traceroute`下node3上的`coredns-5984fb8cbb-tkfrc`容器，其IP地址是`172.33.96.3`，看看其路由信息。
```bash
[root@node1 ~]# traceroute 172.33.96.3
traceroute to 172.33.96.3 (172.33.96.3), 30 hops max, 60 byte packets
1 172.30.118.65 (172.30.118.65) 0.518 ms 0.367 ms 0.398 ms
2 172.33.96.3 (172.33.96.3) 0.451 ms 0.352 ms 0.223 ms
```
我们看到路由直接经过node3的公网IP后就到达了node3节点上的Pod。
Node1的iptables信息：
```bash
[root@node1 ~]# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
KUBE-FIREWALL all -- anywhere anywhere
KUBE-SERVICES all -- anywhere anywhere /* kubernetes service portals */
Chain FORWARD (policy ACCEPT)
target prot opt source destination
KUBE-FORWARD all -- anywhere anywhere /* kubernetes forward rules */
DOCKER-ISOLATION all -- anywhere anywhere
DOCKER all -- anywhere anywhere
ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED
ACCEPT all -- anywhere anywhere
ACCEPT all -- anywhere anywhere
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
KUBE-FIREWALL all -- anywhere anywhere
KUBE-SERVICES all -- anywhere anywhere /* kubernetes service portals */
Chain DOCKER (1 references)
target prot opt source destination
Chain DOCKER-ISOLATION (1 references)
target prot opt source destination
RETURN all -- anywhere anywhere
Chain KUBE-FIREWALL (2 references)
target prot opt source destination
DROP all -- anywhere anywhere /* kubernetes firewall for dropping marked packets */ mark match 0x8000/0x8000
Chain KUBE-FORWARD (1 references)
target prot opt source destination
ACCEPT all -- anywhere anywhere /* kubernetes forwarding rules */ mark match 0x4000/0x4000
ACCEPT all -- 10.254.0.0/16 anywhere /* kubernetes forwarding conntrack pod source rule */ ctstate RELATED,ESTABLISHED
ACCEPT all -- anywhere 10.254.0.0/16 /* kubernetes forwarding conntrack pod destination rule */ ctstate RELATED,ESTABLISHED
Chain KUBE-SERVICES (2 references)
target prot opt source destination
```
从上面的iptables中可以看到注入了很多Kuberentes service的规则，请参考[iptables 规则](https://www.cnyunwei.cc/archives/393)获取更多详细信息。
## 参考
- [coreos/flannel - github.com](https://github.com/coreos/flannel)
- [linux 网络虚拟化： network namespace 简介](http://cizixs.com/2017/02/10/network-virtualization-network-namespace)
- [Linux虚拟网络设备之veth](https://segmentfault.com/a/1190000009251098)
- [iptables 规则](https://www.cnyunwei.cc/archives/393)
- [flannel host-gw network](http://hustcat.github.io/flannel-host-gw-network/)
- [flannel - openshift.com](https://docs.openshift.com/container-platform/3.4/architecture/additional_concepts/flannel.html)
Reference in New Issue View Git Blame Copy Permalink