osd: remove dedicated_devices variable

This variable was related to ceph-disk scenarios.
Since we are entirely dropping ceph-disk support as of stable-4.0, let's
remove this variable.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f0416c8892)

docs/source/index.rst

@@ -201,20 +201,19 @@ At the most basic level you must tell ``ceph-ansible`` what version of Ceph you
 how you want your OSDs configured. To begin your configuration rename each file in ``group_vars/`` you wish to use so that it does not include the ``.sample``
 at the end of the filename, uncomment the options you wish to change and provide your own value.
 
-An example configuration that deploys the upstream ``jewel`` version of Ceph with OSDs that have collocated journals would look like this in ``group_vars/all.yml``:
+An example configuration that deploys the upstream ``octopus`` version of Ceph with lvm batch method would look like this in ``group_vars/all.yml``:
 
 .. code-block:: yaml
 
    ceph_origin: repository
    ceph_repository: community
-   ceph_stable_release: jewel
+   ceph_stable_release: octopus
    public_network: "192.168.3.0/24"
    cluster_network: "192.168.4.0/24"
    monitor_interface: eth1
    devices:
      - '/dev/sda'
      - '/dev/sdb'
-   osd_scenario: collocated
 
 The following config options are required to be changed on all installations but there could be other required options depending on your OSD scenario
 selection or other aspects of your cluster.
@@ -222,7 +221,6 @@ selection or other aspects of your cluster.
 - ``ceph_origin``
 - ``ceph_stable_release``
 - ``public_network``
-- ``osd_scenario``
 - ``monitor_interface`` or ``monitor_address``
 
 
@@ -264,9 +262,8 @@ Full documentation for configuring each of the Ceph daemon types are in the foll
 OSD Configuration
 -----------------
 
-OSD configuration is set by selecting an OSD scenario and providing the configuration needed for
-that scenario. Each scenario is different in it's requirements. Selecting your OSD scenario is done
-by setting the ``osd_scenario`` configuration option.
+OSD configuration was used to be set by selecting an OSD scenario and providing the configuration needed for
+that scenario. As of nautilus in stable-4.0, the only scenarios available is ``lvm``.
 
 .. toctree::
    :maxdepth: 1

docs/source/osds/scenarios.rst

@@ -1,24 +1,22 @@
 OSD Scenario
 ============
 
-As of stable-3.2, the following scenarios are not supported anymore since they are associated to ``ceph-disk``:
+As of stable-4.0, the following scenarios are not supported anymore since they are associated to ``ceph-disk``:
 
 * `collocated`
 * `non-collocated`
 
-``ceph-disk`` was deprecated during the ceph-ansible 3.2 cycle and has been removed entirely from Ceph itself in the Nautilus version.
-Supported values for the required ``osd_scenario`` variable are:
+Since the Ceph luminous release, it is preferred to use the :ref:`lvm scenario
+<osd_scenario_lvm>` that uses the ``ceph-volume`` provisioning tool. Any other
+scenario will cause deprecation warnings.
 
-At present (starting from stable-3.2), there is only one scenario, which defaults to ``lvm``, see:
+``ceph-disk`` was deprecated during the ceph-ansible 3.2 cycle and has been removed entirely from Ceph itself in the Nautilus version.
+At present (starting from stable-4.0), there is only one scenario, which defaults to ``lvm``, see:
 
 * :ref:`lvm <osd_scenario_lvm>`
 
 So there is no need to configure ``osd_scenario`` anymore, it defaults to ``lvm``.
 
-Since the Ceph luminous release, it is preferred to use the :ref:`lvm scenario
-<osd_scenario_lvm>` that uses the ``ceph-volume`` provisioning tool. Any other
-scenario will cause deprecation warnings.
-
 The ``lvm`` scenario mentionned above support both containerized and non-containerized cluster.
 As a reminder, deploying a containerized cluster can be done by setting ``containerized_deployment``
 to ``True``.
@@ -30,13 +28,7 @@ lvm
 
 This OSD scenario uses ``ceph-volume`` to create OSDs, primarily using LVM, and
 is only available when the Ceph release is luminous or newer.
-
-**It is the preferred method of provisioning OSDs.**
-
-It is enabled with the following setting::
-
-
-    osd_scenario: lvm
+It is automatically enabled.
 
 Other (optional) supported settings:
 
@@ -72,7 +64,6 @@ Ceph usage, the configuration would be:
 
 .. code-block:: yaml
 
-   osd_scenario: lvm
    devices:
      - /dev/sda
      - /dev/sdb
@@ -85,7 +76,6 @@ devices, for example:
 
 .. code-block:: yaml
 
-   osd_scenario: lvm
    devices:
      - /dev/sda
      - /dev/sdb
@@ -102,7 +92,6 @@ This option can also be used with ``osd_auto_discovery``, meaning that you do no
 
 .. code-block:: yaml
 
-   osd_scenario: lvm
    osd_auto_discovery: true
 
 Other (optional) supported settings:
@@ -176,7 +165,6 @@ Supported ``lvm_volumes`` configuration settings:
 .. code-block:: yaml
 
    osd_objectstore: bluestore
-   osd_scenario: lvm
    lvm_volumes:
      - data: /dev/sda
      - data: /dev/sdb
@@ -189,7 +177,6 @@ Supported ``lvm_volumes`` configuration settings:
 .. code-block:: yaml
 
    osd_objectstore: bluestore
-   osd_scenario: lvm
    lvm_volumes:
      - data: data-lv1
        data_vg: data-vg1
@@ -204,7 +191,6 @@ Supported ``lvm_volumes`` configuration settings:
 .. code-block:: yaml
 
    osd_objectstore: bluestore
-   osd_scenario: lvm
    lvm_volumes:
      - data: data-lv1
        data_vg: data-vg1
@@ -227,7 +213,6 @@ Supported ``lvm_volumes`` configuration settings:
 .. code-block:: yaml
 
    osd_objectstore: filestore
-   osd_scenario: lvm
    lvm_volumes:
      - data: data-lv1
        data_vg: data-vg1

group_vars/osds.yml.sample

@@ -55,9 +55,6 @@ dummy:
 # If set to True, no matter which osd_objecstore you use the data will be encrypted
 #dmcrypt: False
 
-
-#dedicated_devices: []
-
 # Use ceph-volume to create OSDs from logical volumes.
 # lvm_volumes is a list of dictionaries.
 #

roles/ceph-osd/defaults/main.yml

@@ -47,9 +47,6 @@ osd_auto_discovery: false
 # If set to True, no matter which osd_objecstore you use the data will be encrypted
 dmcrypt: False
 
-
-dedicated_devices: []
-
 # Use ceph-volume to create OSDs from logical volumes.
 # lvm_volumes is a list of dictionaries.
 #

roles/ceph-validate/tasks/check_devices.yml

@@ -1,6 +1,4 @@
 ---
-- name: devices validation
-  block:
 - name: validate devices is actually a device
   parted:
     device: "{{ item }}"
@@ -14,30 +12,3 @@
   when:
     - item.failed
   with_items: "{{ devices_parted.results }}"
-  when:
-    - devices is defined
-
-- name: validate dedicated_device is/are actually device(s)
-  parted:
-    device: "{{ item }}"
-    unit: MiB
-  register: dedicated_device_parted
-  with_items: "{{ dedicated_devices }}"
-  when:
-    - dedicated_devices|default([]) | length > 0
-
-- name: fail if one of the dedicated_device is not a device
-  fail:
-    msg: "{{ item }} is not a block special file!"
-  with_items: "{{ dedicated_device_parted.results }}"
-  when:
-    - dedicated_devices|default([]) | length > 0
-    - item.failed
-
-- name: fail if number of dedicated_devices is not equal to number of devices
-  fail:
-    msg: "Number of dedicated_devices must be equal to number of devices. dedicated_devices: {{ dedicated_devices | length }}, devices: {{ devices | length }}"
-  when:
-    - dedicated_devices|default([]) | length > 0
-    - devices | length > 0
-    - dedicated_devices | length != devices | length