mirror of https://github.com/ceph/ceph-ansible.git
Merge branch 'master' of https://github.com/jjoos/ceph-ansible into jjoos-master
Signed-off-by: Sébastien Han <sebastien.han@enovance.com> Conflicts: roles/ceph-common/defaults/main.yml roles/ceph-common/tasks/Debian.yml roles/ceph-osd/tasks/journal_collocation.yml roles/ceph-osd/tasks/osd_directory.yml roles/ceph-osd/tasks/raw_journal.yml roles/ceph-osd/tasks/raw_multi_journal.ymlpull/133/merge
Sébastien Han
commit
74ede6e166
|
|
@ -1,89 +0,0 @@
|
|||
---
|
||||
# Variables here are applicable to the current role
|
||||
|
||||
## Setup options
|
||||
#
|
||||
|
||||
# ACTIVATE THE FSID VARIABLE FOR NON-VAGRANT DEPLOYMENT
|
||||
#fsid:
|
||||
|
||||
## Packages branch
|
||||
ceph_key: https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc
|
||||
ceph_stable: true # use ceph stable branch
|
||||
ceph_stable_release: firefly # ceph stable release
|
||||
|
||||
# This option is needed for _both_ stable and dev version, so please always fill the right version
|
||||
# # supported distros are el6, rhel6, f18, f19, opensuse12.2, sles11, centos7 (see http://ceph.com/rpm-firefly/)
|
||||
ceph_stable_redhat_distro: el7
|
||||
|
||||
ceph_dev: false # use ceph developement branch
|
||||
ceph_dev_branch: master # developement branch you would like to use e.g: master, wip-hack
|
||||
# supported distros are centos6, centos7, fc17, fc18, fc19, fc20, fedora17, fedora18,
|
||||
# fedora19, fedora20, opensuse12, sles0. (see http://gitbuilder.ceph.com/).
|
||||
# For rhel, please pay attention to the versions: 'rhel6 3' or 'rhel 4', the fullname is _very_ important.
|
||||
ceph_dev_redhat_distro: centos7
|
||||
|
||||
## Ceph options
|
||||
#
|
||||
cephx: true
|
||||
cephx_require_signatures: true
|
||||
cephx_cluster_require_signatures: true
|
||||
cephx_service_require_signatures: false
|
||||
disable_in_memory_logs: true
|
||||
|
||||
## Monitor options
|
||||
#
|
||||
monitor_interface: eth1
|
||||
mon_osd_down_out_interval: 600
|
||||
mon_osd_min_down_reporters: 7 # number of OSDs per host + 1
|
||||
mon_clock_drift_allowed: .15
|
||||
mon_clock_drift_warn_backoff: 30
|
||||
mon_osd_full_ratio: .95
|
||||
mon_osd_nearfull_ratio: .85
|
||||
mon_osd_report_timeout: 300
|
||||
|
||||
## OSD options
|
||||
#
|
||||
journal_size: 100
|
||||
pool_default_pg_num: 128
|
||||
pool_default_pgp_num: 128
|
||||
pool_default_size: 2
|
||||
pool_default_min_size: 1
|
||||
cluster_network: 192.168.42.0/24
|
||||
public_network: 192.168.42.0/24
|
||||
osd_mkfs_type: xfs
|
||||
osd_mkfs_options_xfs: -f -i size=2048
|
||||
osd_mount_options_xfs: noatime
|
||||
osd_mon_heartbeat_interval: 30
|
||||
# CRUSH
|
||||
pool_default_crush_rule: 0
|
||||
osd_crush_update_on_start: "true"
|
||||
# Object backend
|
||||
osd_objectstore: filestore
|
||||
# Performance tuning
|
||||
filestore_merge_threshold: 40
|
||||
filestore_split_multiple: 8
|
||||
osd_op_threads: 8
|
||||
filestore_op_threads: 8
|
||||
filestore_max_sync_interval: 5
|
||||
osd_max_scrubs: 1
|
||||
# Recovery tuning
|
||||
osd_recovery_max_active: 5
|
||||
osd_max_backfills: 2
|
||||
osd_recovery_op_priority: 2
|
||||
osd_recovery_max_chunk: 8388608
|
||||
osd_recovery_threads: 1
|
||||
|
||||
## MDS options
|
||||
#
|
||||
mds: true # disable mds configuration in ceph.conf
|
||||
|
||||
# Rados Gateway options
|
||||
#
|
||||
radosgw: true # referenced in monitor role too.
|
||||
#radosgw_dns_name: your.subdomain.tld # subdomains used by radosgw. See http://ceph.com/docs/master/radosgw/config/#enabling-subdomain-s3-calls
|
||||
|
||||
## Testing mode
|
||||
# enable this mode _only_ when you have a single node
|
||||
# if you don't want it keep the option commented
|
||||
#common_single_host_mode: true
|
||||
|
|
@ -1,12 +1,11 @@
|
|||
---
|
||||
- name: update apt cache
|
||||
apt: update-cache=yes
|
||||
|
||||
- name: "update apt cache"
|
||||
action: apt update-cache=yes
|
||||
|
||||
- name: "restart ceph ubuntu"
|
||||
shell: service ceph restart ; service ceph-osd-all restart
|
||||
when: socket.rc == 0
|
||||
|
||||
- name: "restart ceph debian redhat"
|
||||
- name: restart ceph
|
||||
command: service ceph restart
|
||||
when: socket.rc == 0
|
||||
|
||||
- name: restart ceph-osd-all on ubuntu
|
||||
shell: service ceph restart ; service ceph-osd-all restart
|
||||
when: socket.rc == 0 and ansible_distribution == 'Ubuntu'
|
||||
|
|
|
|||
|
|
@ -1,67 +0,0 @@
|
|||
---
|
||||
## Common to all the Ceph Debian nodes
|
||||
#
|
||||
|
||||
- name: Fail on unsupported system
|
||||
fail: msg="System not supported {{ ansible_system }}"
|
||||
when: ansible_system not in ['Linux']
|
||||
|
||||
- name: Fail on unsupported architecture
|
||||
fail: msg="Architecture not supported {{ ansible_architecture }}"
|
||||
when: ansible_architecture not in ['x86_64']
|
||||
|
||||
- name: Fail on unsupported distribution
|
||||
fail: msg="Distribution not supported {{ ansible_os_family }}"
|
||||
when: ansible_os_family not in ['Debian', 'RedHat']
|
||||
|
||||
- name: Install dependencies
|
||||
apt: pkg={{ item }} state=present update_cache=yes cache_valid_time=3600 # we update the cache just in case...
|
||||
with_items:
|
||||
- python-pycurl
|
||||
- ntp
|
||||
- hdparm
|
||||
|
||||
- name: Install the Ceph repository stable key
|
||||
apt_key: data="{{ lookup('file', 'cephstable.asc') }}" state=present
|
||||
when: ceph_stable
|
||||
|
||||
- name: Install the Ceph developement repository key
|
||||
apt_key: data="{{ lookup('file', 'cephdev.asc') }}" state=present
|
||||
when: ceph_dev
|
||||
|
||||
- name: Add Ceph stable repository
|
||||
apt_repository: repo='deb http://ceph.com/debian-{{ ceph_stable_release }}/ {{ ansible_lsb.codename }} main' state=present
|
||||
when: ceph_stable
|
||||
|
||||
- name: Add Ceph development repository
|
||||
apt_repository: repo='deb http://gitbuilder.ceph.com/ceph-deb-{{ ansible_lsb.codename }}-x86_64-basic/ref/{{ ceph_dev_branch }} {{ ansible_lsb.codename }} main' state=present
|
||||
when: ceph_dev
|
||||
|
||||
- name: Install Ceph
|
||||
apt: pkg={{ item }} state=latest
|
||||
with_items:
|
||||
- ceph
|
||||
- ceph-common #|
|
||||
- ceph-fs-common #|--> yes, they are already all dependencies from 'ceph'
|
||||
- ceph-fuse #|--> however while proceding to rolling upgrades and the 'ceph' package upgrade
|
||||
- ceph-mds #|--> they don't get update so we need to force them
|
||||
- libcephfs1 #|
|
||||
|
||||
- name: Check for a Ceph socket
|
||||
shell: stat /var/run/ceph/*.asok > /dev/null 2>&1
|
||||
ignore_errors: true
|
||||
register: socket
|
||||
|
||||
- name: Generate Ceph configuration file
|
||||
template: src=ceph.conf.j2 dest=/etc/ceph/ceph.conf owner=root group=root mode=0644
|
||||
notify: restart ceph ubuntu
|
||||
when: ansible_distribution == 'Ubuntu'
|
||||
|
||||
- name: Generate Ceph configuration file
|
||||
template: src=ceph.conf.j2 dest=/etc/ceph/ceph.conf owner=root group=root mode=0644
|
||||
notify: restart ceph debian redhat
|
||||
when: ansible_distribution == 'Debian' or ansible_os_family == 'RedHat'
|
||||
|
||||
- name: Disable OSD directory parsing by updatedb
|
||||
command: updatedb -e /var/lib/ceph
|
||||
ignore_errors: true
|
||||
|
|
@ -1,54 +0,0 @@
|
|||
---
|
||||
## Common to all the Ceph RedHat nodes
|
||||
#
|
||||
|
||||
- name: Fail on unsupported system
|
||||
fail: msg="System not supported {{ ansible_system }}"
|
||||
when: ansible_system not in ['Linux']
|
||||
|
||||
- name: Fail on unsupported architecture
|
||||
fail: msg="Architecture not supported {{ ansible_architecture }}"
|
||||
when: ansible_architecture not in ['x86_64']
|
||||
|
||||
- name: Fail on unsupported distribution
|
||||
fail: msg="Distribution not supported {{ ansible_os_family }}"
|
||||
when: ansible_os_family not in ['Debian', 'RedHat']
|
||||
|
||||
- name: Install dependencies
|
||||
yum: name={{ item }} state=present
|
||||
with_items:
|
||||
- python-pycurl
|
||||
- ntp
|
||||
- hdparm
|
||||
|
||||
- name: Install the Ceph stable repository key
|
||||
rpm_key: key={{ ceph_key }} state=present
|
||||
when: ceph_stable
|
||||
|
||||
- name: Install the Ceph developement repository key
|
||||
rpm_key: key={{ ceph_key }} state=present
|
||||
when: ceph_dev
|
||||
|
||||
- name: Add Ceph stable repository
|
||||
command: rpm -U http://ceph.com/rpm-{{ ceph_stable_release }}/{{ redhat_distro }}/noarch/ceph-release-1-0.el6.noarch.rpm creates=/etc/yum.repos.d/ceph.repo
|
||||
when: ceph_stable
|
||||
|
||||
- name: Add Ceph development repository
|
||||
command: rpm -U http://gitbuilder.ceph.com/ceph-rpm-{{ ceph_dev_redhat_distro }}-x86_64-basic/ref/{{ ceph_dev_branch }}/noarch/ceph-release-1-0.{{ ceph_stable_redhat_distro }}.noarch.rpm creates=/etc/yum.repos.d/ceph.repo
|
||||
when: ceph_dev
|
||||
|
||||
- name: Install Ceph
|
||||
yum: name=ceph state=latest
|
||||
|
||||
- name: Check for a Ceph socket
|
||||
shell: stat /var/run/ceph/*.asok > /dev/null 2>&1
|
||||
ignore_errors: true
|
||||
register: socket
|
||||
|
||||
- name: Generate Ceph configuration file
|
||||
template: src=ceph.conf.j2 dest=/etc/ceph/ceph.conf owner=root group=root mode=0644
|
||||
notify: restart ceph debian redhat
|
||||
|
||||
- name: Disable OSD directory parsing by updatedb
|
||||
command: updatedb -e /var/lib/ceph
|
||||
ignore_errors: true
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
---
|
||||
- name: Install dependencies
|
||||
apt: >
|
||||
pkg={{ item }}
|
||||
state=present
|
||||
update_cache=yes
|
||||
cache_valid_time=3600
|
||||
with_items:
|
||||
- python-pycurl
|
||||
- ntp
|
||||
- hdparm
|
||||
|
||||
- name: Install the Ceph repository stable key
|
||||
apt_key: >
|
||||
data="{{ lookup('file', 'cephstable.asc') }}"
|
||||
state=present
|
||||
when: ceph_stable
|
||||
|
||||
- name: Install the Ceph developement repository key
|
||||
apt_key: >
|
||||
data="{{ lookup('file', 'cephdev.asc') }}"
|
||||
state=present
|
||||
when: ceph_dev
|
||||
|
||||
- name: Add Ceph stable repository
|
||||
apt_repository: >
|
||||
repo="deb http://ceph.com/debian-{{ ceph_stable_release }}/ {{ ansible_lsb.codename }} main"
|
||||
state=present
|
||||
when: ceph_stable
|
||||
|
||||
- name: Add Ceph development repository
|
||||
apt_repository: >
|
||||
repo="deb http://gitbuilder.ceph.com/ceph-deb-{{ ansible_lsb.codename }}-x86_64-basic/ref/{{ ceph_dev_branch }} {{ ansible_lsb.codename }} main"
|
||||
state=present
|
||||
when: ceph_dev
|
||||
|
||||
- name: Install Ceph
|
||||
apt: >
|
||||
pkg={{ item }}
|
||||
state=latest
|
||||
with_items:
|
||||
- ceph
|
||||
- ceph-common #|
|
||||
- ceph-fs-common #|--> yes, they are already all dependencies from 'ceph'
|
||||
- ceph-fuse #|--> however while proceding to rolling upgrades and the 'ceph' package upgrade
|
||||
- ceph-mds #|--> they don't get update so we need to force them
|
||||
- libcephfs1 #|
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
---
|
||||
- name: Install dependencies
|
||||
yum: >
|
||||
name={{ item }}
|
||||
state=present
|
||||
with_items:
|
||||
- python-pycurl
|
||||
- ntp
|
||||
- hdparm
|
||||
|
||||
- name: Install the Ceph stable repository key
|
||||
rpm_key: >
|
||||
key={{ ceph_key }}
|
||||
state=present
|
||||
when: ceph_stable
|
||||
|
||||
- name: Install the Ceph developement repository key
|
||||
rpm_key: >
|
||||
key={{ ceph_key }}
|
||||
state=present
|
||||
when: ceph_dev
|
||||
|
||||
- name: Add Ceph stable repository
|
||||
command: "rpm -U http://ceph.com/rpm-{{ ceph_stable_release }}/{{ redhat_distro }}/noarch/ceph-release-1-0.el6.noarch.rpm creates=/etc/yum.repos.d/ceph.repo"
|
||||
when: ceph_stable
|
||||
|
||||
- name: Add Ceph development repository
|
||||
command: "rpm -U http://gitbuilder.ceph.com/ceph-rpm-{{ ceph_dev_redhat_distro }}-x86_64-basic/ref/{{ ceph_dev_branch }}/noarch/ceph-release-1-0.{{ ceph_stable_redhat_distro }}.noarch.rpm creates=/etc/yum.repos.d/ceph.repo"
|
||||
when: ceph_dev
|
||||
|
||||
- name: Install Ceph
|
||||
yum: >
|
||||
name=ceph
|
||||
state=latest
|
||||
|
||||
|
|
@ -1,8 +1,38 @@
|
|||
---
|
||||
## Check OS family
|
||||
#
|
||||
- name: Fail on unsupported system
|
||||
fail: "msg=System not supported {{ ansible_system }}"
|
||||
when: "ansible_system not in ['Linux']"
|
||||
|
||||
- include: RedHat.yml
|
||||
- name: Fail on unsupported architecture
|
||||
fail: "msg=Architecture not supported {{ ansible_architecture }}"
|
||||
when: "ansible_architecture not in ['x86_64']"
|
||||
|
||||
- name: Fail on unsupported distribution
|
||||
fail: "msg=Distribution not supported {{ ansible_os_family }}"
|
||||
when: "ansible_os_family not in ['Debian', 'RedHat']"
|
||||
|
||||
- include: install_on_redhat.yml
|
||||
when: ansible_os_family == 'RedHat'
|
||||
- include: Debian.yml
|
||||
|
||||
- include: install_on_debian.yml
|
||||
when: ansible_os_family == 'Debian'
|
||||
|
||||
- name: Check for a Ceph socket
|
||||
shell: "stat /var/run/ceph/*.asok > /dev/null 2>&1"
|
||||
ignore_errors: true
|
||||
register: socket
|
||||
|
||||
- name: Generate Ceph configuration file
|
||||
template: >
|
||||
src=ceph.conf.j2
|
||||
dest=/etc/ceph/ceph.conf
|
||||
owner=root
|
||||
group=root
|
||||
mode=0644
|
||||
notify:
|
||||
- restart ceph
|
||||
- restart ceph-osd-all on ubuntu
|
||||
|
||||
- name: Disable OSD directory parsing by updatedb
|
||||
command: updatedb -e /var/lib/ceph
|
||||
ignore_errors: true
|
||||
|
|
|
|||
|
|
@ -1,3 +1,89 @@
|
|||
---
|
||||
# You can override default vars defined in defaults/main.yml here,
|
||||
# but I would advice to use host or group vars instead
|
||||
# You can override vars by using host or group vars
|
||||
|
||||
## Setup options
|
||||
#
|
||||
|
||||
# ACTIVATE THE FSID VARIABLE FOR NON-VAGRANT DEPLOYMENT
|
||||
#fsid:
|
||||
|
||||
## Packages branch
|
||||
ceph_key: https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc
|
||||
ceph_stable: true # use ceph stable branch
|
||||
ceph_stable_release: firefly # ceph stable release
|
||||
|
||||
# This option is needed for _both_ stable and dev version, so please always fill the right version
|
||||
# # supported distros are el6, rhel6, f18, f19, opensuse12.2, sles11, centos7 (see http://ceph.com/rpm-firefly/)
|
||||
ceph_stable_redhat_distro: el7
|
||||
|
||||
ceph_dev: false # use ceph developement branch
|
||||
ceph_dev_branch: master # developement branch you would like to use e.g: master, wip-hack
|
||||
# supported distros are centos6, centos7, fc17, fc18, fc19, fc20, fedora17, fedora18,
|
||||
# fedora19, fedora20, opensuse12, sles0. (see http://gitbuilder.ceph.com/).
|
||||
# For rhel, please pay attention to the versions: 'rhel6 3' or 'rhel 4', the fullname is _very_ important.
|
||||
ceph_dev_redhat_distro: centos7
|
||||
|
||||
## Ceph options
|
||||
#
|
||||
cephx: true
|
||||
cephx_require_signatures: true
|
||||
cephx_cluster_require_signatures: true
|
||||
cephx_service_require_signatures: false
|
||||
disable_in_memory_logs: true
|
||||
|
||||
## Monitor options
|
||||
#
|
||||
monitor_interface: eth1
|
||||
mon_osd_down_out_interval: 600
|
||||
mon_osd_min_down_reporters: 7 # number of OSDs per host + 1
|
||||
mon_clock_drift_allowed: .15
|
||||
mon_clock_drift_warn_backoff: 30
|
||||
mon_osd_full_ratio: .95
|
||||
mon_osd_nearfull_ratio: .85
|
||||
mon_osd_report_timeout: 300
|
||||
|
||||
## OSD options
|
||||
#
|
||||
journal_size: 100
|
||||
pool_default_pg_num: 128
|
||||
pool_default_pgp_num: 128
|
||||
pool_default_size: 2
|
||||
pool_default_min_size: 1
|
||||
cluster_network: 192.168.42.0/24
|
||||
public_network: 192.168.42.0/24
|
||||
osd_mkfs_type: xfs
|
||||
osd_mkfs_options_xfs: -f -i size=2048
|
||||
osd_mount_options_xfs: noatime
|
||||
osd_mon_heartbeat_interval: 30
|
||||
# CRUSH
|
||||
pool_default_crush_rule: 0
|
||||
osd_crush_update_on_start: "true"
|
||||
# Object backend
|
||||
osd_objectstore: filestore
|
||||
# Performance tuning
|
||||
filestore_merge_threshold: 40
|
||||
filestore_split_multiple: 8
|
||||
osd_op_threads: 8
|
||||
filestore_op_threads: 8
|
||||
filestore_max_sync_interval: 5
|
||||
osd_max_scrubs: 1
|
||||
# Recovery tuning
|
||||
osd_recovery_max_active: 5
|
||||
osd_max_backfills: 2
|
||||
osd_recovery_op_priority: 2
|
||||
osd_recovery_max_chunk: 1048576
|
||||
osd_recovery_threads: 1
|
||||
|
||||
## MDS options
|
||||
#
|
||||
mds: true # disable mds configuration in ceph.conf
|
||||
|
||||
# Rados Gateway options
|
||||
#
|
||||
radosgw: true # referenced in monitor role too.
|
||||
#radosgw_dns_name: your.subdomain.tld # subdomains used by radosgw. See http://ceph.com/docs/master/radosgw/config/#enabling-subdomain-s3-calls
|
||||
|
||||
## Testing mode
|
||||
# enable this mode _only_ when you have a single node
|
||||
# if you don't want it keep the option commented
|
||||
#common_single_host_mode: true
|
||||
|
|
|
|||
|
|
@ -1,7 +0,0 @@
|
|||
---
|
||||
# Variables here are applicable to the current role
|
||||
|
||||
## Ceph options
|
||||
#
|
||||
cephx: true
|
||||
|
||||
|
|
@ -1,13 +1,22 @@
|
|||
---
|
||||
## Deploy Ceph metadata server(s)
|
||||
#
|
||||
|
||||
- name: Copy MDS bootstrap key
|
||||
copy: src=fetch/{{ fsid }}/var/lib/ceph/bootstrap-mds/ceph.keyring dest=/var/lib/ceph/bootstrap-mds/ceph.keyring owner=root group=root mode=600
|
||||
copy: >
|
||||
src=fetch/{{ fsid }}/var/lib/ceph/bootstrap-mds/ceph.keyring
|
||||
dest=/var/lib/ceph/bootstrap-mds/ceph.keyring
|
||||
owner=root
|
||||
group=root
|
||||
mode=600
|
||||
when: cephx
|
||||
|
||||
- name: Create MDS directory
|
||||
action: file path=/var/lib/ceph/mds/ceph-{{ ansible_hostname }} state=directory owner=root group=root mode=0644
|
||||
file: >
|
||||
path=/var/lib/ceph/mds/ceph-{{ ansible_hostname }}
|
||||
state=directory
|
||||
owner=root
|
||||
group=root
|
||||
mode=0644
|
||||
when: cephx
|
||||
|
||||
- name: Create MDS keyring
|
||||
|
|
@ -16,8 +25,16 @@
|
|||
changed_when: False
|
||||
|
||||
- name: Set MDS key permissions
|
||||
file: path=/var/lib/ceph/mds/ceph-{{ ansible_hostname }}/keyring mode=0600 owner=root group=root
|
||||
file: >
|
||||
path=/var/lib/ceph/mds/ceph-{{ ansible_hostname }}/keyring
|
||||
mode=0600
|
||||
owner=root
|
||||
group=root
|
||||
when: cephx
|
||||
|
||||
- name: Start and add that the MDS service to the init sequence
|
||||
service: name=ceph state=started enabled=yes args=mds
|
||||
service: >
|
||||
name=ceph
|
||||
state=started
|
||||
enabled=yes
|
||||
args=mds
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
---
|
||||
# You can override default vars defined in defaults/main.yml here,
|
||||
# but I would advice to use host or group vars instead
|
||||
# You can override vars by using host or group vars
|
||||
|
||||
cephx: true
|
||||
|
|
|
|||
|
|
@ -1,14 +0,0 @@
|
|||
---
|
||||
# Variables here are applicable to the current role
|
||||
|
||||
## Ceph options
|
||||
#
|
||||
|
||||
# ACTIVATE BOTH FSID AND MONITOR_SECRET VARIABLES FOR NON-VAGRANT DEPLOYMENT
|
||||
# fsid:
|
||||
# monitor_secret:
|
||||
cephx: true
|
||||
|
||||
# Rados Gateway options
|
||||
# referenced in common role too.
|
||||
radosgw: true
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
---
|
||||
- name: Create monitor initial keyring
|
||||
command: "ceph-authtool /var/lib/ceph/tmp/keyring.mon.{{ ansible_hostname }} --create-keyring --name=mon. --add-key={{ monitor_secret }} --cap mon 'allow *' creates=/var/lib/ceph/tmp/keyring.mon.{{ ansible_hostname }}"
|
||||
|
||||
- name: Set initial monitor key permissions
|
||||
file: >
|
||||
path=/var/lib/ceph/tmp/keyring.mon.{{ ansible_hostname }}
|
||||
mode=0600
|
||||
owner=root
|
||||
group=root
|
||||
|
||||
- name: Create monitor directory
|
||||
file: >
|
||||
path=/var/lib/ceph/mon/ceph-{{ ansible_hostname }}
|
||||
state=directory
|
||||
owner=root
|
||||
group=root
|
||||
mode=0644
|
||||
|
||||
- name: Ceph monitor mkfs
|
||||
command: "ceph-mon --mkfs -i {{ ansible_hostname }} --keyring /var/lib/ceph/tmp/keyring.mon.{{ ansible_hostname }} creates=/var/lib/ceph/mon/ceph-{{ ansible_hostname }}/keyring"
|
||||
|
||||
- name: Start and add that the monitor service to the init sequence
|
||||
service: >
|
||||
name=ceph
|
||||
state=started
|
||||
enabled=yes
|
||||
args=mon
|
||||
|
|
@ -1,26 +1,8 @@
|
|||
---
|
||||
## Deploy Ceph monitor(s)
|
||||
#
|
||||
|
||||
- name: Create monitor initial keyring
|
||||
command: ceph-authtool /var/lib/ceph/tmp/keyring.mon.{{ ansible_hostname }} --create-keyring --name=mon. --add-key={{ monitor_secret }} --cap mon 'allow *' creates=/var/lib/ceph/tmp/keyring.mon.{{ ansible_hostname }}
|
||||
|
||||
- name: Set initial monitor key permissions
|
||||
file: path=/var/lib/ceph/tmp/keyring.mon.{{ ansible_hostname }} mode=0600 owner=root group=root
|
||||
|
||||
- name: Create monitor directory
|
||||
file: path=/var/lib/ceph/mon/ceph-{{ ansible_hostname }} state=directory owner=root group=root mode=0644
|
||||
|
||||
- name: Ceph monitor mkfs
|
||||
command: ceph-mon --mkfs -i {{ ansible_hostname }} --keyring /var/lib/ceph/tmp/keyring.mon.{{ ansible_hostname }} creates=/var/lib/ceph/mon/ceph-{{ ansible_hostname }}/keyring
|
||||
|
||||
- name: Start and add that the monitor service to the init sequence
|
||||
service: name=ceph state=started enabled=yes args=mon
|
||||
- include: deploy_monitors.yml
|
||||
|
||||
# Wait for mon discovery and quorum resolution
|
||||
# the admin key is not instantanely created so we have to wait a bit
|
||||
#
|
||||
|
||||
- name: If client.admin key exists
|
||||
command: stat /etc/ceph/ceph.client.admin.keyring
|
||||
register: result
|
||||
|
|
@ -33,7 +15,10 @@
|
|||
changed_when: False
|
||||
|
||||
- name: Copy keys to the ansible server
|
||||
fetch: src={{ item }} dest=fetch/{{ fsid }}/{{ item }} flat=yes
|
||||
fetch: >
|
||||
src={{ item }}
|
||||
dest=fetch/{{ fsid }}/{{ item }}
|
||||
flat=yes
|
||||
when: cephx
|
||||
with_items:
|
||||
- /etc/ceph/ceph.client.admin.keyring # just in case another application needs it
|
||||
|
|
@ -42,5 +27,10 @@
|
|||
- /etc/ceph/keyring.radosgw.gateway
|
||||
|
||||
- name: Drop in a motd script to report status when logging in
|
||||
copy: src=precise/92-ceph dest=/etc/update-motd.d/92-ceph owner=root group=root mode=0755
|
||||
copy: >
|
||||
src=precise/92-ceph
|
||||
dest=/etc/update-motd.d/92-ceph
|
||||
owner=root
|
||||
group=root
|
||||
mode=0755
|
||||
when: ansible_distribution_release == 'precise'
|
||||
|
|
|
|||
|
|
@ -1,3 +1,11 @@
|
|||
---
|
||||
# You can override default vars defined in defaults/main.yml here,
|
||||
# but I would advice to use host or group vars instead
|
||||
# You can override vars by using host or group vars
|
||||
|
||||
# ACTIVATE BOTH FSID AND MONITOR_SECRET VARIABLES FOR NON-VAGRANT DEPLOYMENT
|
||||
# fsid:
|
||||
# monitor_secret:
|
||||
cephx: true
|
||||
|
||||
# Rados Gateway options
|
||||
# referenced in common role too.
|
||||
radosgw: true
|
||||
|
|
|
|||
|
|
@ -1,65 +0,0 @@
|
|||
---
|
||||
# Variables here are applicable to the current role
|
||||
#
|
||||
|
||||
## Ceph options
|
||||
#
|
||||
|
||||
# ACTIVATE THE FSID VARIABLE FOR NON-VAGRANT DEPLOYMENT
|
||||
# fsid:
|
||||
cephx: true
|
||||
|
||||
# Devices to be used as OSDs
|
||||
# You can pre-provision disks that are not present yet.
|
||||
# Ansible will just skip them. Newly added disk will be
|
||||
# automatically configured during the next run.
|
||||
#
|
||||
|
||||
|
||||
# !! WARNING !!
|
||||
#
|
||||
# /!\ ENABLE ONLY ONE SCENARIO AT A TIME /!\
|
||||
#
|
||||
# !! WARNING !!
|
||||
|
||||
|
||||
# Declare devices
|
||||
# All the scenarii inherit from the following device declaration
|
||||
#
|
||||
devices: [ '/dev/sdb', '/dev/sdc', '/dev/sdd', '/dev/sde']
|
||||
|
||||
|
||||
# I. First scenario: journal and osd_data on the same device
|
||||
# Use 'true' to enable this scenario
|
||||
# This will collocate both journal and data on the same disk
|
||||
# creating a partition at the beginning of the device
|
||||
#
|
||||
journal_collocation: true
|
||||
|
||||
|
||||
# II. Second scenario: single journal device for N OSDs
|
||||
# Use 'true' to enable this scenario
|
||||
#
|
||||
raw_journal: false
|
||||
raw_journal_device: /dev/sdb
|
||||
|
||||
|
||||
# III. Third scenario: N journal devices for N OSDs
|
||||
# Use 'true' to enable this scenario
|
||||
#
|
||||
# In the following example:
|
||||
# * sdd and sde will get sdb as a journal
|
||||
# * sdf and sdg will get sdc as a journal
|
||||
# While starting you have 2 options:
|
||||
# 1. Pre-allocate all the devices
|
||||
# 2. Progressively add new devices
|
||||
|
||||
raw_multi_journal: false
|
||||
raw_journal_devices: [ '/dev/sdb', '/dev/sdb', '/dev/sdc', '/dev/sdc' ]
|
||||
|
||||
|
||||
# IV. Fourth scenario: use directory instead of disk for OSDs
|
||||
# Use 'true' to enable this scenario
|
||||
|
||||
osd_directory: false
|
||||
osd_directories: [ '/var/lib/ceph/osd/mydir1', '/var/lib/ceph/osd/mydir2', '/var/lib/ceph/osd/mydir3', '/var/lib/ceph/osd/mydir4']
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
---
|
||||
# Activate means:
|
||||
# - mount the volume in a temp location
|
||||
# - allocate an osd id (if needed)
|
||||
# - remount in the correct location /var/lib/ceph/osd/$cluster-$id
|
||||
# - start ceph-osd
|
||||
#
|
||||
|
||||
# This task is for disk devices only because of the explicit use of the first
|
||||
# partition.
|
||||
|
||||
- name: Activate OSD(s) when device is a disk
|
||||
command: |
|
||||
ceph-disk activate {{ item.2 | regex_replace('^(\/dev\/cciss\/c[0-9]{1}d[0-9]{1})$', '\\1p') }}1
|
||||
with_together:
|
||||
- parted.results
|
||||
- ispartition.results
|
||||
- devices
|
||||
when: item.0.rc == 0 and item.1.rc != 0
|
||||
ignore_errors: True
|
||||
changed_when: False
|
||||
|
||||
# This task is for partitions because we don't explicitly use a partition.
|
||||
|
||||
- name: Activate OSD(s) when device is a partition
|
||||
command: "ceph-disk activate {{ item.1 }}"
|
||||
with_together:
|
||||
- ispartition.results
|
||||
- devices
|
||||
when: item.0.rc == 0
|
||||
ignore_errors: True
|
||||
changed_when: False
|
||||
|
||||
- name: Start and add that the OSD service to the init sequence
|
||||
service: >
|
||||
name=ceph
|
||||
state=started
|
||||
enabled=yes
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
---
|
||||
# NOTE (leseb): current behavior of ceph-disk is to fail when the device is mounted "stderr: ceph-disk: Error: Device is mounted: /dev/sdb1"
|
||||
# the return code is 1, which makes sense, however ideally if ceph-disk will detect a ceph partition
|
||||
# it should exist we rc=0 and don't do anything unless we do something like --force
|
||||
# As as a final word, I prefer to keep the partition check instead of running ceph-disk prepare with "ignore_errors: True"
|
||||
# I believe it's safer
|
||||
- name: Check if the device is a partition or a disk
|
||||
shell: "echo '{{ item }}' | egrep '/dev/(([a-z]{3,4}[0-9]$)|(cciss/c[0-9]{1}d[0-9]{1}p[0-9]$))'"
|
||||
ignore_errors: true
|
||||
with_items: devices
|
||||
register: ispartition
|
||||
changed_when: False
|
||||
|
||||
- name: If partition named 'ceph' exists
|
||||
shell: "parted --script {{ item }} print | egrep -sq '^ 1.*ceph'"
|
||||
ignore_errors: True
|
||||
with_items: devices
|
||||
register: parted
|
||||
changed_when: False
|
||||
|
|
@ -1,39 +1,7 @@
|
|||
---
|
||||
## SCENARIO 1: JOURNAL AND OSD_DATA ON THE SAME DEVICE
|
||||
#
|
||||
|
||||
- name: Install dependencies
|
||||
apt: pkg=parted state=present
|
||||
when: ansible_os_family == 'Debian'
|
||||
|
||||
- name: Install dependencies
|
||||
yum: name=parted state=present
|
||||
when: ansible_os_family == 'RedHat'
|
||||
|
||||
- name: Copy OSD bootstrap key
|
||||
copy: src=fetch/{{ fsid }}/var/lib/ceph/bootstrap-osd/ceph.keyring dest=/var/lib/ceph/bootstrap-osd/ceph.keyring owner=root group=root mode=600
|
||||
when: cephx
|
||||
|
||||
# NOTE (leseb): current behavior of ceph-disk is to fail when the device is mounted "stderr: ceph-disk: Error: Device is mounted: /dev/sdb1"
|
||||
# the return code is 1, which makes sense, however ideally if ceph-disk will detect a ceph partition
|
||||
# it should exist we rc=0 and don't do anything unless we do something like --force
|
||||
# As as a final word, I prefer to keep the partition check instead of running ceph-disk prepare with "ignore_errors: True"
|
||||
# I believe it's safer
|
||||
#
|
||||
|
||||
- name: Check if the device is a partition or a disk
|
||||
shell: echo '{{ item }}' | egrep '/dev/(([a-z]{3,4}[0-9]$)|(cciss/c[0-9]{1}d[0-9]{1}p[0-9]$))'
|
||||
ignore_errors: true
|
||||
with_items: devices
|
||||
register: ispartition
|
||||
changed_when: False
|
||||
|
||||
- name: If partition named 'ceph' exists
|
||||
shell: parted --script {{ item }} print | egrep -sq '^ 1.*ceph'
|
||||
ignore_errors: True
|
||||
with_items: devices
|
||||
register: parted
|
||||
changed_when: False
|
||||
- include: check_devices.yml
|
||||
|
||||
# Prepare means
|
||||
# - create GPT partition for a disk, or a loop label for a partition
|
||||
|
|
@ -52,7 +20,7 @@
|
|||
# failed, this is why we check if the device is a partition too.
|
||||
|
||||
- name: Prepare OSD disk(s)
|
||||
command: ceph-disk prepare {{ item.2 }}
|
||||
command: "ceph-disk prepare {{ item.2 }}"
|
||||
when: (item.0.rc != 0 or item.1.rc != 0) and journal_collocation
|
||||
ignore_errors: True
|
||||
with_together:
|
||||
|
|
@ -60,36 +28,4 @@
|
|||
- ispartition.results
|
||||
- devices
|
||||
|
||||
# Activate means:
|
||||
# - mount the volume in a temp location
|
||||
# - allocate an osd id (if needed)
|
||||
# - remount in the correct location /var/lib/ceph/osd/$cluster-$id
|
||||
# - start ceph-osd
|
||||
#
|
||||
|
||||
# This task is for disk devices only because of the explicit use of the first
|
||||
# partition.
|
||||
|
||||
- name: Activate OSD(s) when device is a disk
|
||||
command: ceph-disk activate {{ item.2 | regex_replace('^(\/dev\/cciss\/c[0-9]{1}d[0-9]{1})$', '\\1p') }}1
|
||||
with_together:
|
||||
- parted.results
|
||||
- ispartition.results
|
||||
- devices
|
||||
when: item.0.rc == 0 and item.1.rc != 0
|
||||
ignore_errors: True
|
||||
changed_when: False
|
||||
|
||||
# This task is for partitions because we don't explicitly use a partition.
|
||||
|
||||
- name: Activate OSD(s) when device is a partition
|
||||
command: ceph-disk activate {{ item.1 }}
|
||||
with_together:
|
||||
- ispartition.results
|
||||
- devices
|
||||
when: item.0.rc == 0
|
||||
ignore_errors: True
|
||||
changed_when: False
|
||||
|
||||
- name: Start and add that the OSD service to the init sequence
|
||||
service: name=ceph state=started enabled=yes args=osd
|
||||
- include: activate_osds.yml
|
||||
|
|
|
|||
|
|
@ -1,13 +1,30 @@
|
|||
---
|
||||
## Deploy Ceph Oject Storage Daemon(s)
|
||||
#
|
||||
|
||||
- name: Install dependencies
|
||||
apt: >
|
||||
pkg=parted
|
||||
state=present
|
||||
when: ansible_os_family == 'Debian'
|
||||
|
||||
- name: Install dependencies
|
||||
yum: >
|
||||
name=parted
|
||||
state=present
|
||||
when: ansible_os_family == 'RedHat'
|
||||
|
||||
- name: Copy OSD bootstrap key
|
||||
copy: >
|
||||
src=fetch/{{ fsid }}/var/lib/ceph/bootstrap-osd/ceph.keyring
|
||||
dest=/var/lib/ceph/bootstrap-osd/ceph.keyring
|
||||
owner=root
|
||||
group=root
|
||||
mode=600
|
||||
when: cephx
|
||||
|
||||
- include: journal_collocation.yml
|
||||
when: journal_collocation
|
||||
|
||||
- include: raw_journal.yml
|
||||
when: raw_journal
|
||||
|
||||
- include: raw_multi_journal.yml
|
||||
when: raw_multi_journal
|
||||
|
||||
|
|
|
|||
|
|
@ -1,25 +1,16 @@
|
|||
---
|
||||
## SCENARIO 4: USE A DIRECTORY INSTEAD OF A DISK FOR OSD
|
||||
#
|
||||
|
||||
- name: Install dependencies
|
||||
apt: pkg=parted state=present
|
||||
when: ansible_os_family == 'Debian'
|
||||
|
||||
- name: Install dependencies
|
||||
yum: name=parted state=present
|
||||
when: ansible_os_family == 'RedHat'
|
||||
|
||||
- name: Copy OSD bootstrap key
|
||||
copy: src=fetch/{{ fsid }}/var/lib/ceph/bootstrap-osd/ceph.keyring dest=/var/lib/ceph/bootstrap-osd/ceph.keyring owner=root group=root mode=600
|
||||
when: cephx
|
||||
|
||||
# NOTE (leseb): we do not check the filesystem underneath the directory
|
||||
# so it is really up to you to configure this properly.
|
||||
# Declaring more than one directory on the same filesystem will confuse Ceph.
|
||||
|
||||
- name: Create OSD directories
|
||||
file: path={{ item }} state=directory owner=root group=root
|
||||
file: >
|
||||
path={{ item }}
|
||||
state=directory
|
||||
owner=root
|
||||
group=root
|
||||
with_items: osd_directories
|
||||
|
||||
# Prepare means
|
||||
|
|
@ -36,7 +27,7 @@
|
|||
# since Ansible will sequential process the loop
|
||||
|
||||
- name: Prepare OSD disk(s)
|
||||
command: ceph-disk prepare {{ item }}
|
||||
command: "ceph-disk prepare {{ item }}"
|
||||
when: osd_directory
|
||||
with_items: osd_directories
|
||||
|
||||
|
|
@ -48,9 +39,12 @@
|
|||
#
|
||||
|
||||
- name: Activate OSD(s)
|
||||
command: ceph-disk activate {{ item }}
|
||||
command: "ceph-disk activate {{ item }}"
|
||||
with_items: osd_directories
|
||||
changed_when: False
|
||||
|
||||
- name: Start and add that the OSD service to the init sequence
|
||||
service: name=ceph state=started enabled=yes args=osd
|
||||
service: >
|
||||
name=ceph
|
||||
state=started
|
||||
enabled=yes
|
||||
|
|
|
|||
|
|
@ -1,39 +1,7 @@
|
|||
---
|
||||
## SCENARIO 3: N JOURNAL DEVICES FOR N OSDS
|
||||
#
|
||||
|
||||
- name: Install dependencies
|
||||
apt: pkg=parted state=present
|
||||
when: ansible_os_family == 'Debian'
|
||||
|
||||
- name: Install dependencies
|
||||
yum: name=parted state=present
|
||||
when: ansible_os_family == 'RedHat'
|
||||
|
||||
- name: Copy OSD bootstrap key
|
||||
copy: src=fetch/{{ fsid }}/var/lib/ceph/bootstrap-osd/ceph.keyring dest=/var/lib/ceph/bootstrap-osd/ceph.keyring owner=root group=root mode=600
|
||||
when: cephx
|
||||
|
||||
# NOTE (leseb): current behavior of ceph-disk is to fail when the device is mounted "stderr: ceph-disk: Error: Device is mounted: /dev/sdb1"
|
||||
# the return code is 1, which makes sense, however ideally if ceph-disk will detect a ceph partition
|
||||
# it should exist we rc=0 and don't do anything unless we do something like --force
|
||||
# As as a final word, I prefer to keep the partition check instead of running ceph-disk prepare with "ignore_errors: True"
|
||||
# I believe it's safer
|
||||
#
|
||||
|
||||
- name: Check if the device is a partition or a disk
|
||||
shell: echo '{{ item }}' | egrep '/dev/[a-z]{3}[0-9]$'
|
||||
ignore_errors: true
|
||||
with_items: devices
|
||||
register: ispartition
|
||||
changed_when: False
|
||||
|
||||
- name: If partition named 'ceph' exists
|
||||
shell: parted --script {{ item }} print | egrep -sq '^ 1.*ceph'
|
||||
ignore_errors: True
|
||||
with_items: devices
|
||||
register: parted
|
||||
changed_when: False
|
||||
- include: check_devices.yml
|
||||
|
||||
# Prepare means
|
||||
# - create GPT partition for a disk, or a loop label for a partition
|
||||
|
|
@ -52,7 +20,7 @@
|
|||
# failed, this is why we check if the device is a partition too.
|
||||
|
||||
- name: Prepare OSD disk(s)
|
||||
command: ceph-disk prepare {{ item.2 }} {{ item.3 }}
|
||||
command: "ceph-disk prepare {{ item.2 }} {{ item.3 }}"
|
||||
when: (item.0.rc != 0 or item.1.rc != 0) and raw_multi_journal
|
||||
ignore_errors: True
|
||||
with_together:
|
||||
|
|
@ -61,36 +29,4 @@
|
|||
- devices
|
||||
- raw_journal_devices
|
||||
|
||||
# Activate means:
|
||||
# - mount the volume in a temp location
|
||||
# - allocate an osd id (if needed)
|
||||
# - remount in the correct location /var/lib/ceph/osd/$cluster-$id
|
||||
# - start ceph-osd
|
||||
#
|
||||
|
||||
# This task is for disk devices only because of the explicit use of the first
|
||||
# partition.
|
||||
|
||||
- name: Activate OSD(s) when device is a disk
|
||||
command: ceph-disk activate {{ item.2 }}1
|
||||
with_together:
|
||||
- parted.results
|
||||
- ispartition.results
|
||||
- devices
|
||||
when: item.0.rc == 0 and item.1.rc != 0
|
||||
ignore_errors: True
|
||||
changed_when: False
|
||||
|
||||
# This task is for partitions because we don't explicitly use a partition.
|
||||
|
||||
- name: Activate OSD(s) when device is a partition
|
||||
command: ceph-disk activate {{ item.1 }}
|
||||
with_together:
|
||||
- ispartition.results
|
||||
- devices
|
||||
when: item.0.rc == 0
|
||||
ignore_errors: True
|
||||
changed_when: False
|
||||
|
||||
- name: Start and add that the OSD service to the init sequence
|
||||
service: name=ceph state=started enabled=yes args=osd
|
||||
- include: activate_osds.yml
|
||||
|
|
|
|||
|
|
@ -1,3 +1,76 @@
|
|||
---
|
||||
# You can override default vars defined in defaults/main.yml here,
|
||||
# but I would advice to use host or group vars instead
|
||||
|
||||
## Ceph options
|
||||
#
|
||||
|
||||
# ACTIVATE THE FSID VARIABLE FOR NON-VAGRANT DEPLOYMENT
|
||||
# fsid:
|
||||
cephx: true
|
||||
|
||||
# Devices to be used as OSDs
|
||||
# You can pre-provision disks that are not present yet.
|
||||
# Ansible will just skip them. Newly added disk will be
|
||||
# automatically configured during the next run.
|
||||
#
|
||||
|
||||
|
||||
# !! WARNING !!
|
||||
#
|
||||
# /!\ ENABLE ONLY ONE SCENARIO AT A TIME /!\
|
||||
#
|
||||
# !! WARNING !!
|
||||
|
||||
|
||||
# Declare devices
|
||||
# All the scenarii inherit from the following device declaration
|
||||
#
|
||||
devices:
|
||||
- /dev/sdb
|
||||
- /dev/sdc
|
||||
- /dev/sdd
|
||||
- /dev/sde
|
||||
|
||||
|
||||
# I. First scenario: journal and osd_data on the same device
|
||||
# Use 'true' to enable this scenario
|
||||
# This will collocate both journal and data on the same disk
|
||||
# creating a partition at the beginning of the device
|
||||
|
||||
journal_collocation: true
|
||||
|
||||
|
||||
# II. Second scenario: single journal device for N OSDs
|
||||
# Use 'true' to enable this scenario
|
||||
|
||||
# deprecated, please use scenario III with a single raw_journal_device
|
||||
|
||||
|
||||
# III. Third scenario: N journal devices for N OSDs
|
||||
# Use 'true' to enable this scenario
|
||||
#
|
||||
# In the following example:
|
||||
# * sdd and sde will get sdb as a journal
|
||||
# * sdf and sdg will get sdc as a journal
|
||||
# While starting you have 2 options:
|
||||
# 1. Pre-allocate all the devices
|
||||
# 2. Progressively add new devices
|
||||
|
||||
raw_multi_journal: false
|
||||
raw_journal_devices:
|
||||
- /dev/sdb
|
||||
- /dev/sdb
|
||||
- /dev/sdc
|
||||
- /dev/sdc
|
||||
|
||||
|
||||
# IV. Fourth scenario: use directory instead of disk for OSDs
|
||||
# Use 'true' to enable this scenario
|
||||
|
||||
osd_directory: false
|
||||
osd_directories:
|
||||
- /var/lib/ceph/osd/mydir1
|
||||
- /var/lib/ceph/osd/mydir2
|
||||
- /var/lib/ceph/osd/mydir3
|
||||
- /var/lib/ceph/osd/mydir4
|
||||
|
|
|
|||
|
|
@ -1,12 +0,0 @@
|
|||
---
|
||||
# Variables here are applicable to the current role
|
||||
|
||||
|
||||
## Ceph options
|
||||
#
|
||||
cephx: true
|
||||
|
||||
# Rados Gateway options
|
||||
redhat_distro_ceph_extra: centos6.4 # supported distros are centos6.3, centos6.4, centos6, fedora18, fedora19, opensuse12.2, rhel6.3, rhel6.4, rhel6.5, rhel6, sles11sp2
|
||||
email_address: foo@bar.com
|
||||
|
||||
|
|
@ -1,8 +1,14 @@
|
|||
---
|
||||
- name: restart apache2
|
||||
service: name=apache2 state=restarted enabled=yes
|
||||
service: >
|
||||
name=apache2
|
||||
state=restarted
|
||||
enabled=yes
|
||||
when: ansible_os_family == 'Debian'
|
||||
|
||||
- name: restart apache2
|
||||
service: name=httpd state=restarted enabled=yes
|
||||
service: >
|
||||
name=httpd
|
||||
state=restarted
|
||||
enabled=yes
|
||||
when: ansible_os_family == 'RedHat'
|
||||
|
|
|
|||
|
|
@ -1,70 +0,0 @@
|
|||
---
|
||||
## Deploy RADOS Gateway
|
||||
#
|
||||
|
||||
- name: Copy RGW bootstrap key
|
||||
copy: src=fetch/{{ fsid }}/etc/ceph/keyring.radosgw.gateway dest=/etc/ceph/keyring.radosgw.gateway owner=root group=root mode=600
|
||||
when: cephx
|
||||
|
||||
- name: Set RGW bootstrap key permissions
|
||||
file: path=/etc/ceph/keyring.radosgw.gateway mode=0600 owner=root group=root
|
||||
when: cephx
|
||||
|
||||
#- name: Add optimized version of the apache2 package repository
|
||||
# apt_repository: repo='deb http://gitbuilder.ceph.com/apache2-deb-{{ ansible_lsb.codename }}-x86_64-basic/ref/master {{ ansible_lsb.codename }} main' state=present
|
||||
#
|
||||
#- name: Add optimized version of the fastcgi package repository
|
||||
# apt_repository: repo='deb http://gitbuilder.ceph.com/libapache-mod-fastcgi-deb-{{ ansible_lsb.codename }}-x86_64-basic/ref/master {{ ansible_lsb.codename }} main' state=present
|
||||
#
|
||||
|
||||
- name: Add Ceph extra
|
||||
apt_repository: repo='deb http://ceph.com/packages/ceph-extras/debian {{ ansible_lsb.codename }} main' state=present
|
||||
|
||||
- name: Install Apache, fastcgi and Rados Gateway
|
||||
apt: pkg={{ item }} state=present
|
||||
with_items:
|
||||
- apache2
|
||||
- libapache2-mod-fastcgi
|
||||
- radosgw
|
||||
|
||||
## Prepare Apache
|
||||
#
|
||||
|
||||
- name: Install default httpd.conf
|
||||
template: src=httpd.conf dest=/etc/apache2/httpd.conf owner=root group=root
|
||||
|
||||
- name: Enable some apache mod rewrite and fastcgi
|
||||
command: "{{ item }}"
|
||||
with_items:
|
||||
- a2enmod rewrite
|
||||
- a2enmod fastcgi
|
||||
|
||||
- name: Install Rados Gateway vhost
|
||||
template: src=rgw.conf dest=/etc/apache2/sites-available/rgw.conf owner=root group=root
|
||||
|
||||
## Prepare RGW
|
||||
#
|
||||
|
||||
- name: Create RGW directory
|
||||
file: path=/var/lib/ceph/radosgw/{{ ansible_fqdn }} state=directory owner=root group=root mode=0644
|
||||
|
||||
- name: Enable Rados Gateway vhost and disable default site
|
||||
command: "{{ item }}"
|
||||
with_items:
|
||||
- a2ensite rgw.conf
|
||||
- a2dissite default
|
||||
notify:
|
||||
- restart apache2
|
||||
|
||||
- name: Install s3gw.fcgi script
|
||||
copy: src=s3gw.fcgi dest=/var/www/s3gw.fcgi mode=0555 owner=root group=root
|
||||
|
||||
## If we don't perform this check Ansible will start multiple instance of radosgw
|
||||
- name: Check if RGW is started
|
||||
command: /etc/init.d/radosgw status
|
||||
register: rgwstatus
|
||||
ignore_errors: True
|
||||
|
||||
- name: Start RGW
|
||||
command: /etc/init.d/radosgw start
|
||||
when: rgwstatus.rc != 0
|
||||
|
|
@ -0,0 +1,73 @@
|
|||
---
|
||||
## Deploy RADOS Gateway
|
||||
#
|
||||
|
||||
- name: Add Ceph extra
|
||||
apt_repository: >
|
||||
repo="deb http://ceph.com/packages/ceph-extras/debian {{ ansible_lsb.codename }} main"
|
||||
state=present
|
||||
|
||||
- name: "Install Apache, fastcgi and Rados Gateway"
|
||||
apt: >
|
||||
pkg={{ item }}
|
||||
state=present
|
||||
with_items:
|
||||
- apache2
|
||||
- libapache2-mod-fastcgi
|
||||
- radosgw
|
||||
|
||||
## Prepare Apache
|
||||
#
|
||||
|
||||
- name: Install default httpd.conf
|
||||
template: src=httpd.conf dest=/etc/apache2/httpd.conf owner=root group=root
|
||||
|
||||
- name: Enable some apache mod rewrite and fastcgi
|
||||
command: "{{ item }}"
|
||||
with_items:
|
||||
- a2enmod rewrite
|
||||
- a2enmod fastcgi
|
||||
|
||||
- name: Install Rados Gateway vhost
|
||||
template: >
|
||||
src=rgw.conf
|
||||
dest=/etc/apache2/sites-available/rgw.conf
|
||||
owner=root
|
||||
group=root
|
||||
|
||||
## Prepare RGW
|
||||
#
|
||||
|
||||
- name: Create RGW directory
|
||||
file: >
|
||||
path=/var/lib/ceph/radosgw/{{ ansible_fqdn }}
|
||||
state=directory
|
||||
owner=root
|
||||
group=root
|
||||
mode=0644
|
||||
|
||||
- name: Enable Rados Gateway vhost and disable default site
|
||||
command: "{{ item }}"
|
||||
with_items:
|
||||
- a2ensite rgw.conf
|
||||
- a2dissite default
|
||||
notify:
|
||||
- restart apache2
|
||||
|
||||
- name: Install s3gw.fcgi script
|
||||
copy: >
|
||||
src=s3gw.fcgi
|
||||
dest=/var/www/s3gw.fcgi
|
||||
mode=0555
|
||||
owner=root
|
||||
group=root
|
||||
|
||||
## If we don't perform this check Ansible will start multiple instance of radosgw
|
||||
- name: Check if RGW is started
|
||||
command: /etc/init.d/radosgw status
|
||||
register: rgwstatus
|
||||
ignore_errors: True
|
||||
|
||||
- name: Start RGW
|
||||
command: /etc/init.d/radosgw start
|
||||
when: rgwstatus.rc != 0
|
||||
|
|
@ -2,16 +2,12 @@
|
|||
## Deploy RADOS Gateway
|
||||
#
|
||||
|
||||
- name: Copy RGW bootstrap key
|
||||
copy: src=fetch/{{ fsid }}/etc/ceph/keyring.radosgw.gateway dest=/etc/ceph/keyring.radosgw.gateway owner=root group=root mode=600
|
||||
when: cephx
|
||||
|
||||
- name: Set RGW bootstrap key permissions
|
||||
file: path=/etc/ceph/keyring.radosgw.gateway mode=0644 owner=root group=root
|
||||
when: cephx
|
||||
|
||||
- name: Add Ceph extra
|
||||
template: src=ceph-extra.repo dest=/etc/yum.repos.d owner=root group=root
|
||||
template: >
|
||||
src=ceph-extra.repo
|
||||
dest=/etc/yum.repos.d
|
||||
owner=root
|
||||
group=root
|
||||
|
||||
- name: Add special fastcgi repository key
|
||||
rpm_key: key=http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt
|
||||
|
|
@ -19,8 +15,10 @@
|
|||
- name: Add special fastcgi repository
|
||||
command: rpm -ivh http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el6.rf.x86_64.rpm
|
||||
|
||||
- name: Install Apache, fastcgi, and Rados Gateway
|
||||
yum: name={{ item }} state=present
|
||||
- name: "Install Apache, fastcgi, and Rados Gateway"
|
||||
yum: >
|
||||
name={{ item }}
|
||||
state=present
|
||||
with_items:
|
||||
- httpd
|
||||
- mod_fastcgi
|
||||
|
|
@ -31,16 +29,30 @@
|
|||
#
|
||||
|
||||
- name: Install Rados Gateway vhost
|
||||
template: src=rgw.conf dest=/etc/httpd/conf.d/rgw.conf owner=root group=root
|
||||
template: >
|
||||
src=rgw.conf
|
||||
dest=/etc/httpd/conf.d/rgw.conf
|
||||
owner=root
|
||||
group=root
|
||||
|
||||
## Prepare RGW
|
||||
#
|
||||
|
||||
- name: Create RGW directory
|
||||
file: path=/var/lib/ceph/radosgw/{{ ansible_fqdn }} state=directory owner=root group=root mode=0644
|
||||
file: >
|
||||
path=/var/lib/ceph/radosgw/{{ ansible_fqdn }}
|
||||
state=directory
|
||||
owner=root
|
||||
group=root
|
||||
mode=0644
|
||||
|
||||
- name: Install s3gw.fcgi script
|
||||
copy: src=s3gw.fcgi dest=/var/www/s3gw.fcgi mode=0555 owner=root group=root
|
||||
copy: >
|
||||
src=s3gw.fcgi
|
||||
dest=/var/www/s3gw.fcgi
|
||||
mode=0555
|
||||
owner=root
|
||||
group=root
|
||||
|
||||
- name: Disable default site
|
||||
shell: sed -i "s/^[^+#]/#/g" /etc/httpd/conf.d/welcome.conf
|
||||
|
|
@ -1,9 +1,17 @@
|
|||
---
|
||||
- name: Copy RGW bootstrap key
|
||||
copy: src=fetch/{{ fsid }}/etc/ceph/keyring.radosgw.gateway dest=/etc/ceph/keyring.radosgw.gateway owner=root group=root mode=600
|
||||
when: cephx
|
||||
|
||||
- name: Set RGW bootstrap key permissions
|
||||
file: path=/etc/ceph/keyring.radosgw.gateway mode=0600 owner=root group=root
|
||||
when: cephx
|
||||
|
||||
## Check OS family
|
||||
#
|
||||
|
||||
- include: RedHat.yml
|
||||
- include: install_redhat.yml
|
||||
when: ansible_os_family == 'RedHat'
|
||||
|
||||
- include: Debian.yml
|
||||
- include: install_debian.yml
|
||||
when: ansible_os_family == 'Debian'
|
||||
|
|
|
|||
|
|
@ -1,3 +1,10 @@
|
|||
---
|
||||
# You can override default vars defined in defaults/main.yml here,
|
||||
# but I would advice to use host or group vars instead
|
||||
# You can override vars by using host or group vars
|
||||
|
||||
## Ceph options
|
||||
#
|
||||
cephx: true
|
||||
|
||||
# Rados Gateway options
|
||||
redhat_distro_ceph_extra: centos6.4 # supported distros are centos6.3, centos6.4, centos6, fedora18, fedora19, opensuse12.2, rhel6.3, rhel6.4, rhel6.5, rhel6, sles11sp2
|
||||
email_address: foo@bar.com
|
||||
|
|
|
|||
|
|
@ -1,6 +0,0 @@
|
|||
---
|
||||
# Variables here are applicable to the current role
|
||||
|
||||
# Rados Gateway options
|
||||
radosgw_interface: eth1 # the public interface which the radosgw talks to the world with, this variable is used in the haproxy role, this does not need to be set if haproxy is not used.
|
||||
|
||||
|
|
@ -1,3 +1,5 @@
|
|||
---
|
||||
- name: restart haproxy
|
||||
service: name=haproxy state=restarted
|
||||
service: >
|
||||
name=haproxy
|
||||
state=restarted
|
||||
|
|
|
|||
|
|
@ -1,15 +1,32 @@
|
|||
---
|
||||
- apt_repository: repo=ppa:vbernat/haproxy-1.5 state=present
|
||||
- name: Add repository
|
||||
apt_repository: >
|
||||
repo=ppa:vbernat/haproxy-1.5
|
||||
state=present
|
||||
|
||||
- apt: name={{ item }} state=present
|
||||
- name: Install haproxy
|
||||
apt: >
|
||||
name={{ item }}
|
||||
state=present
|
||||
with_items:
|
||||
- haproxy
|
||||
- socat
|
||||
|
||||
- copy: src=precise/haproxy dest=/etc/default/haproxy
|
||||
- name: Copy default configuration
|
||||
copy: >
|
||||
src=precise/haproxy
|
||||
dest=/etc/default/haproxy
|
||||
notify: restart haproxy
|
||||
|
||||
- template: src=precise/haproxy.cfg dest=/etc/haproxy/haproxy.cfg backup=yes
|
||||
- name: Create configuration
|
||||
template: >
|
||||
src=precise/haproxy.cfg
|
||||
dest=/etc/haproxy/haproxy.cfg
|
||||
backup=yes
|
||||
notify: restart haproxy
|
||||
|
||||
- service: name=haproxy state=started enabled=yes
|
||||
- name: Start and enable haproxy
|
||||
service: >
|
||||
name=haproxy
|
||||
state=started
|
||||
enabled=yes
|
||||
|
|
|
|||
|
|
@ -1,3 +1,5 @@
|
|||
---
|
||||
# You can override default vars defined in defaults/main.yml here,
|
||||
# but I would advice to use host or group vars instead
|
||||
# You can override vars by using host or group vars
|
||||
|
||||
# Rados Gateway options
|
||||
radosgw_interface: eth1 # the public interface which the radosgw talks to the world with, this variable is used in the haproxy role, this does not need to be set if haproxy is not used.
|
||||
|
|
|
|||
|
|
@ -25,7 +25,10 @@
|
|||
- ceph-mon
|
||||
post_tasks:
|
||||
- name: restart monitor(s)
|
||||
service: name=ceph state=restarted args=mon
|
||||
service: >
|
||||
name=ceph
|
||||
state=restarted
|
||||
args=mon
|
||||
|
||||
- hosts: osds
|
||||
serial: 1
|
||||
|
|
@ -47,4 +50,7 @@
|
|||
- ceph-mds
|
||||
post_tasks:
|
||||
- name: restart metadata server(s)
|
||||
service: name=ceph state=restarted args=mds
|
||||
service: >
|
||||
name=ceph
|
||||
state=restarted
|
||||
args=mds
|
||||
|
|
|
|||
Loading…
Reference in New Issue