When creating a new pool, target_size_ratio was ignored by ansible module ceph_pool.py.
target_size_ratio is now used when pg_autoscale_mode is on.
Tests added to library tests.
This adds too the use in the role ceph-rgw.
Signed-off-by: Fabien Brachere <fabien.brachere@celeste.fr>
Since the major ceph-volume lvm batch refactoring, the report value
is different.
Before the refact, the report was a dict with the OSDs list to be created
under the "osds" key.
After the refact, the report is a list of dict.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
set fetch_directory variable in default/main.yml instead of using the
defaults jinja filter in tasks/main.yml.
Fixes: #6072
Signed-off-by: Karl-Heinz Preuß <karl-heinz.preuss@cms.hu-berlin.de>
This reverts commit 4d1fdd2b05.
This breaks the backward compatibility with previous osd_memory_target
calculation and we could have a value lower than the minimum value allowed
(896M) which causes some ceph commands to fail (like ceph assimilate-conf).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The alertmanager, grafana and prometheus configuration file are
generated with the template module which doesn't allow for using
config overrides.
Instead we could use the config_template plugin action and add a
new variable for overrides (one for each component).
With this patch, one should be able to add configuration to
prometheus with the following:
---
alertmanager_conf_overrides:
global:
smtp_smarthost: 'localhost:25'
...
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1902999
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
81233dd introduced a regression with the ceph_ec_profile module call in
the ceph-rgw role due the missing cluster module parameter.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The conversion fact task was only executed when the grafana_server_group_name
variable was explicitly set in the user configuration. If an user was using
the default value then the conversion wasn't executed.
This also adds back the default grafana_server_group_name value in case user
was using the default value and to avoid undefined variable error.
Instead of hardcoding the "monitoring" group name then we can reuse the
monitoring_group_name variable.
There's no need to override the monitoring_group_name variable, it's either
using the default value or the one defined by the user.
Finally removing the delegate_to statement on the add_host task since it's
always executed on the ansible controller.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1903732
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since the backing generate_secret() just hands out urandom output,
running as privileged doesn't seem to be required. It's not
desireable to provide sudo in some Ansible runner environments.
Signed-off-by: Jukka Nousiainen <jukka.nousiainen@csc.fi>
Let's discard the ansible lint error 306 and add a "# noqa 306" on tasks
where we don't need `set -o pipefail`
Fixes: #6090
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We should always use the ceph_volume ansible module when possible.
This patch replace the ceph-volume inventory and lvm {list,zap} commands
called via the command/shell modules by the corresponding call with the
ceph_volume module.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds ceph_crush_rule ansible module for replacing the command
module usage with the ceph osd crush rule commands.
This module can manage both erasure and replicated crush rules.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This allows skipping this task if really desired.
Use it carefully. Use it at your own risk.
Fixes: #6073
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Instead of iterate over all client nodes with a loop sequentially, we
can use the group_by ansible buildin.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds ceph_osd_flag ansible module for replacing the command module
usage with the ceph osd set/unset commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
As of podman `2.0.5`, `--cap-add` and `--privileged` are exclusive
options.
```
Nov 30 13:56:30 magna089 podman[171677]: Error: invalid config provided: CapAdd and privileged are mutually exclusive options
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1902149
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of podman 2.0.5, `--ignore` param conflicts with `--storage`.
```
Nov 30 13:53:10 magna089 podman[164443]: Error: --storage conflicts with --volumes, --all, --latest, --ignore and --cidfile
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds ceph_mgr_module ansible module for replacing the command module
usage with the ceph mgr module enable/disable commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Set the owner/group on alertmanager and prometheus directories and
files to nobody and nogroup (uid and gid 65534) to avoid permission
issues.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1901543
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
adding monitor is no longer possible because we generate a new mon
keyring each time the playbook is run.
Fixes: #5864
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using a custom pool for iSCSI gateway then we need to set the pool
name in the configuration otherwise the default rbd pool name will be
used.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit ensures that the `/var/lib/ceph/osd/{{ cluster }}-{{ osd_id }}` is
present before starting OSDs.
This is needed specificly when redeploying an OSD in case of OS upgrade
failure.
Since ceph data are still present on its devices then the node can be
redeployed, however those directories aren't present since they are
initially created by ceph-volume. We could recreate them manually but
for better user experience we can ask ceph-ansible to recreate them.
NOTE:
this only works for OSDs that were deployed with ceph-volume.
ceph-disk deployed OSDs would have to get those directories recreated
manually.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1898486
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to use run_once on that task when having running monitors
otherwise the read task could be skip and the set task will fail.
The conditional check 'crush_rule_variable.rc == 0' failed. The error
was: error while evaluating conditional (crush_rule_variable.rc == 0):
'dict object' has no attribute 'rc'
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1898856
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit changes the bind mount option for the mount point
`/var/lib/ceph` in the systemd template for mon and mgr containers. This
is needed in case of collocating mon/mgr with osds using dmcrypt
scenario.
Once mon/mgr got converted to containers, the dmcrypt layer sub mount is
still seen in `/var/lib/ceph`. For some reason it makes the
corresponding devices busy so any other container can't open/close it.
As a result, it prevents osds from starting properly.
Since it only happens on the nodes converted before the OSD play, the idea is
to bind mount `/var/lib/ceph` on mon and mgr with the `rshared` option
so once the sub mount is unmounted, it is propagated inside the
container so it doesn't see that mount point.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1896392
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is a workaround to avoid error like following:
```
Error: error creating container storage: the container name "ceph-mgr-magna022" is already in use by "4a5f674e113f837a0cc561dea5d2cd55d16ca159a647b7794ab06c4c276ef701"
```
that doesn't seem to be 100% reproducible but it shows up after a
reboot. The only workaround we came up with at the moment is to run
`podman rm --storage <container>` before starting it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1887716
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The `osd_pool_default_crush_rule` is set based on `crush_rule_variable`, which
is the output of a `grep` command.
However, two consecutive tasks can set that variable, and if the second task is
skipped, it still overwrites the `crush_rule_variable`, leading the
`osd_pool_default_crush_rule` to be set to `ceph_osd_pool_default_crush_rule`
instead of the output of the first task.
This commit ensures that the fact is set right after the `crush_rule_variable`
is assigned, before it can be overwritten.
Closes#5912
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The osd_memory_target variable was only used if it was higher than the
calculated value based on the number of OSDs. This is changed to always
use the value if it is set in the configuration. This allows this value
to be intentionally set lower so that it does not have to be changed
when more OSDs are added later.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
This sets the `dashboard_grafana_api_no_ssl_verify` default value
according to the length of `dashboard_crt` and `dashboard_key`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If some OSDs are to be created and others already exist the calculation
only counted the to be created OSDs. This changes the calculation to
take all OSDs into account.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the rgw/rbdmirror services status, we're only using the
servicmap structure in the ceph status output.
To optimize this, we could use the ceph service dump command which contains
the same needed information.
This command returns less information and is slightly faster than the ceph
status command.
$ ceph status -f json | wc -c
2001
$ ceph service dump -f json | wc -c
1105
$ time ceph status -f json > /dev/null
real 0m0.557s
user 0m0.516s
sys 0m0.040s
$ time ceph service dump -f json > /dev/null
real 0m0.454s
user 0m0.434s
sys 0m0.020s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the quorum status, we're only using the quorum_names
structure in the ceph status output.
To optimize this, we could use the ceph quorum_status command which contains
the same needed information.
This command returns less information.
$ ceph status -f json | wc -c
2001
$ ceph quorum_status -f json | wc -c
957
$ time ceph status -f json > /dev/null
real 0m0.577s
user 0m0.538s
sys 0m0.029s
$ time ceph quorum_status -f json > /dev/null
real 0m0.544s
user 0m0.527s
sys 0m0.016s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Improve the checked way of the OSD created checking process.
This replaces the ceph status command by the ceph osd stat command.
The osdmap structure isn't needed anymore.
$ ceph status -f json | wc -c
2001
$ ceph osd stat -f json | wc -c
132
$ time ceph status -f json > /dev/null
real 0m0.563s
user 0m0.526s
sys 0m0.036s
$ time ceph osd stat -f json > /dev/null
real 0m0.457s
user 0m0.411s
sys 0m0.045s
Signed-off-by: wangxiaotong <wangxiaotong@fiberhome.com>
After rolling updates performed with
`infrastructure-playbooks/rolling_updates.yml`, files located in
`/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }}` had mode 0755 (including
the keyring), making them world-readable.
This commit separates the task that configured permissions recursively on
`/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }}` into two separate tasks:
1. Set the ownership and mode of the directory itself;
2. Recursively set ownership in the directory, but don't modify the mode.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Instead of using ceph auth get-or-create command via the ansible command
module then we can use the ceph_key module.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using ceph auth get command via the ansible command module
then we can use the ceph_key module and the info state.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Otherwise this task fails if no permission is set on the item.
Previously the code omited the mode parameter if it was not set, but
this was lost with commit ab370b6ad8.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
Since we've changed to podman configuration using the detach mode and
systemd type to forking then the container logs aren't present in the
journald anymore.
The default conmon log driver is using k8s-file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using the curl command with ipv6 address and brackets then we need
to use the -g option otherwise the command fails.
$ curl http://[fdc2:328:750b:6983::6]:8080
curl: (3) [globbing] error: bad range specification after pos 9
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This file is currently deployed with '0644' ownership making this file
readable by any user on the system.
Since it contains sensitive information it should be readable by the
owner only.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890119
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit cleans up the `main.yml` task file of `ceph-config`.
It drops the local ceph.conf generation.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Correctly set `osd_ids_non_container.stdout_lines` to an empty list if it's
undefined (i.e. in check mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The current task installs the ceph-crash key to "most" hosts via
"delegate_to". This key is only used by the ceph-crash daemon and should
just be installed on all hosts targeted by this role. There is no need
for using a delegated task.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
The service should be started after the ceph-osd systemd overrides has
been added, otherwise, the latter isn't considered.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1860739
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Fabien Brachere
Dimitri Savineau
Karl-Heinz Preuß
Seena Fallah
Jukka Nousiainen
Guillaume Abrioux
Benoît Knecht
Gaudenz Steinlin
wangxiaotong