This commit checks the length of `virtual_ips` doesn't exceed the length
of `groups[rgwloadbalancer_group_name]`.
It also ensure this variable is defined when
`groups[rgwloadbalancer_group_name]` contains at least one node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3b63e0649c)
While 2ca33641 fixed a bug in the way the `keepalived.conf.j2` template matched
hostnames to set the VRRP `MASTER`/`BACKUP` states, it also introduced a
regression in the case where `virtual_ips` is a list of more than one IP
address.
The previous behavior would result in each host in the `rgwloadbalancers` group
to be `MASTER` for one of the `virtual_ips`, but the new behavior caused the
first host to be `MASTER` for all the IP address in `virtual_ips`.
This commit restores the original behavior.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 2bede4762e)
This is a workaround for an issue in ansible.
When trying to stop/mask/disable this service in one task, the stop
didn't actually happen, the task doesn't fail but for some reason the
container is still present and running.
Then the task starting the service in the role ceph-crash fails because
it can't start the container since it's already running with the same
name.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1955393
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3db1ea7ec4)
TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES is for both bluestore and filestore
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit 41295f0ef6)
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit e98d9b70bd)
This removes the fact `skipped_nodes` which is useless when we run with
`--limit` since it gets reset when a new iteration is made.
Instead, let's print within a final play which node has been skipped
reusing the `skip_this_node` fact.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3d4267051f)
When dashboard_frontend_vip is provided, all the services should be
configured using the related VIP. A new VIP variable is added for
both prometheus and alertmanager: we're already able to properly
config the grafana vip using dashboard_frontend_vip variable.
This change adds the same variable for both prometheus and
alertmanager.
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit 441651638d)
We shouldn't prevent from setting target_size_ratio when the autoscaler
is set to 'warn'.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1906305
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The `set_fact rgw_ports` task was failing due to a templating error, because
`hostvars[item].rgw_instances` is a list, but it was treated as if it was a
dictionary.
Another issue was the fact that the `unique` filter only applied to the list
being appended to `rgw_ports` instead of the entire list, which means it was
possible to have duplicate items.
Lastly, `rgw_ports` would have been a list of integers, but the `seport` module
expects a list of strings.
This commit fixes all of the issues above, allowing the `ceph-rgw-loadbalancer`
role to work on systems with SELinux enabled.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit c078513475)
When collocating daemons, if we chown all files under `/var/lib/ceph` it
can cause issues for the collocated daemons that wouldn't have been
migrated yet.
This commit makes the playbook chown only the files corresponding to the
daemon being migrated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ddbc11c4a9)
This adds a `ExecStartPre=-/usr/bin/mkdir -p /var/log/ceph` in all
systemd service templates for all ceph daemon.
This is specific to RHCS after a Leapp upgrade is done. Indeed, the
`/var/log/ceph` seems to be removed after the upgrade.
In order to work around this issue let's ensure the directory is present
before trying to start the containers with podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1949489
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit bab403b603)
`configure_mirroring.yml` is called right after the daemon is started.
Sometimes, it can happen the first task in `configure_mirroring.yml` is
run while the daemon isn't yet ready, adding a retries/until on that
task should help to avoid causing the playbook to fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1944996
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b1e7e1ad0f)
when running docker-to-podman playbook, there's no need to call
`ceph-config` and `ceph-rgw` from the role `ceph-handler`.
It can even have side effects when coming from a baremetal cluster that
was previously migrated using the switch-to-containers playbook. Indeed
it might complain about missing .target systemd unit since they are
removed during that migration.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1944999
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 70f19be367)
this adds a small documentation in the header of the playbook in order
to explain what is the goal of this playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 36b4227dcd)
This moves some task from the `ceph-nfs` role in `ceph-common` since
some of them are needed in `ceph-rgwloadbalancer` role.
This avoids duplicated tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d0442d81b9)
This adds all rgw ports to the http_port_t selinux type so it
allows haproxy to connect to those ports in order to avoid AVC.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1923890
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6bbb90198b)
haproxy gets an AVC when configured to connect to port 8081
This commit adds a snippet regarding haproxy in a selinux environment
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1923890
Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com>
(cherry picked from commit 9e7f22a071)
Currently NFS Ganesha (ceph-nfs) consumes /etc/idmapd.conf, which
controls mapping of user/owner identities under NFSv4+. With
containerized service deployment, this file is an immutable part of the
container image and cannot be modified.
Here we provide group variables, and a taskk and templates for the
ceph-nfs role, to set the path of the idmap configuration file and
to make the most common adjustment to the contents of that file --
namely to set the 'Domain'. We default the path to /etc/ganesha/idmap.conf
so that we will not conflict with /etc/idmapd.conf on the controller nodes
where ganesha runs. NFSv4 clients, as used for example by the Cinder NFS
driver, consume /etc/idmapd.conf and may require different settings than
what is wanted for NFS Ganesha. Additionally, because we already bind
/etc/ganesha from the host into the ceph-nfs container, the file NFS
Ganesha consumes will no longer be an immutable part of the container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1925646
Signed-off-by: Tom Barron tpb@dyncloud.net
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2db2208e40)
This commit adds the parameter `--storage.tsdb.retention.time` to the
prometheus systemd unit template.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1928000
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b60c61ce45)
Playbook must fail anyway, the `rescue` block has been introduced for
unmasking the unit after the playbook has failed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e9ddb972fe)
if for some reason the playbook fails after the service was
stopped, disabled and masked and before it got restarted, enabled and
unmasked, the playbook leaves the service masked and which can make users
confused and forces them to unmask the unit manually.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1917680
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 07029e1bf1)
This add a quick documentation in ceph-defaults about `igw_network`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c5728bdc63)
This adds the possibility to deploy the dashboard with igw nodes using
a dedicated subnet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1926170
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c33de174f1)
rbd-mirroring is not configured as adding peer is getting skipped.
Peer addition should not get skipped if its not added already
Closes - https://bugzilla.redhat.com/show_bug.cgi?id=1942444
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
(cherry picked from commit 006998e804)
This adds the missing service stop task for ceph-crash upgrade workflow.
It should have been added through commit
`15872e3db1e342238636bc9c8e1aef6bd1d3dcd8` in stable-4.0 but at the time
we backported this patch ceph-crash wasn't implemented yet so the
ceph-crash related content in this patch was removed. Then, ceph-crash
has been implemented later so we are still missing this part of the patch in
stable-4.0.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1943471
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
0.17.0 which was released today (03/26/2021) breaks ansible-lint execution with
py2.7.
From https://pypi.org/project/ruamel.yaml we can read:
> The 0.16.13 release was the last that will tested to be working on Python 2.7.
Let's enforce the version on 0.16.13 when running with py2.7
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Docs reflect that each instance of `rgw_instances`
can now take rgw_zonemaster, rgw_zonesecondary,
rgw_zonegroupmaster, rgw_multisite_proto.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
(cherry picked from commit a59bc2da3b)
This converts some missed calls to `ansible_*` that were missed in
initial PR #6312
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0163ecc924)
As a continuation of a7f2fa73e6, this
change switches fact injection to off by default in the provided
ansible.cfg.
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit db031a4993)
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit a7f2fa73e6)
This is never called in the playbook and seems unmaintained.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b01f16e835)
for some reason, `quay.io/app-sre/grafana` no longer exist.
as a workaround, all dashboard related images have been mirrored on
quay.ceph.io.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c90b0985e5)
due to recent changes in shaman, we must fetch the right repo by
filtering on the desired architecture.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5801171b37)
The data structure seems to have been modified in ceph@master (quincy).
This commit update the test accordingly.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b8080bac41)
the data structure seems to have been modified in ceph@master (quincy).
This commit update the test accordingly.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7e1db0b599)
This function makes the `ceph_volume` module be not idempotent in
containerized context because it tries to run a container and bindmount
directories that no longer exist.
In that case, the `lvs` command being executed returns something
different than `0` so we can't call `json.loads(out)['report'][0]['lv']`
since it might throw an python error.
The idea is to return `True` only if `rc` is equal to `0` and
`len(result)` is greater than `0`, which means the command matched an
LV.
Fixes: #6284
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ed79bc7a4e)
`command -v` is a bash script which needs a shell to run.
Fixes: #6325
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 14c472707c)
When collocating OSDs with other daemon, `num_osds` is incorrectly calculated
because `ceph-config` is called multiple times.
Indeed, the following code:
```
num_osds: "{{ lvm_list.stdout | default('{}') | from_json | length | int + num_osds | default(0) | int }}"
```
makes `num_osds` be incremented each time `ceph-config` is called.
We have to reset it in order to get the correct number of expected OSDs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 31a0f2653d)
In order to avoid false positive in the CI that I've been unable to
reproduce.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f7fd1c2298)
While working on the previous PR, I found a couple of typos in the
docs. This fixes those.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit 8b1474ab75)
The "update apt cache" in the ceph-handler role was never called and the
handler trigger after adding the uca repository doesn't exist at all.
Instead of using a handler for that we can just set the update_cache
parameter to true like the other apt_repository tasks.
Resolve merge conflict from cherry-picking this commit.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 09d6706697)
When asking `ceph-volume` to report only in `lvm batch` context, there's
a bug described in bz1896803 [1] when `--yes` is passed (which by the
way isn't necessary with `--report`).
This commit ensure `--yes` isn't passed to `ceph-volume` when `--report`
is used.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1896803
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1896803
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fe6d6ba622)
This commit makes sure purge playbooks remove those file if for any reason they
have been left.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1920900
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b9dd253a4f)
There's no need to slow down the playbook execution time by migrating
all the `ceph-crash` instances in a serial way. Let's remove the
`serial: 1` so the migration is achieved in a parallel way.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 980a5a7df4)
When running the rolling_update.yml playbook and adding the dashboard
component in the same time then the requirement (like container packages)
aren't installed.
This could lead to a failure in case of using authentication on the
container registry because the playbook will try to login on the registry
but podman/docker aren't yet installed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1903504
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1918650
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 48a456dc8c)
The monitoring node running grafana needs the rhcs tools repostory
enabled in non containerized deployment to be able to install the
ceph-grafana-dashboards rpm package.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1918650
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit e4dd0067c6)
Since b105549 we don't install node-exporter on client nodes so we should
also exclude the client node from the node-exporter upgrade.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 94af3c87d1)
Guillaume Abrioux
Benoît Knecht
Seena Fallah
Francesco Pantano
kalebskeithley
VasishtaShastry
Ali Maredia
Alex Schultz
Ken Dreyer
Matthew Vernon
Dimitri Savineau