On containerized deployment, the mon container sometimes needs to
access to the radosgw endpoint (via the radosgw-admin command). When
using TLS on the radosgw with self-signed certificates then we need to
access to the CA certification from the mon container.
The CA certificate needs to be added on the host and then the directory
will be bind mount on the container.
Resolves: #4358
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2b0616ecca)
Like the OpenStack keyrings, we can use the profile rbd for the clients
keyring (both mon and osd).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 49aa05b96c)
This reverts commit 2d955757ee.
The "osd blacklist" isn't an osd caps but should be used with mon caps.
Also the correct caps for this is: 'allow command "osd blacklist"'.
The current change is breaking the openstack and clients keyrings.
By using the profile rbd (which is already used) we already rely on the
ability to blacklist dead client.
Resolves: #4385
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 717af83475)
If the user has set the `ansible_python_interpreter`, ansible will not try to
discover python, so `discovered_python_interpreter` will not be set.
Solution: Set `discovered_python_interpreter` to `ansible_python_interpreter`
if `ansible_python_interpreter` is defined
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
(cherry picked from commit bd507fa147)
since the following commit:
commit 1ac94c048f
rgw: add support for multiple rgw instances on a single host
we have multi-instance rgw support on a single host and
the config section name of the rgw changed from
[client.rgw.$(hostname)] -> [client.rgw.$(hostname).rgwX]
when X is the sequence number: 0,1,2,...
So we should assign 'rgw_zone' item to the exact rgw instance
config section in ceph.conf
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
(cherry picked from commit a0590cae9d)
This commit makes it possible to parametrize the ceph directories modes.
So it changes hardocded mode for ceph related directories from 0755 to
customizable with `ceph_directories_mode` variable.
Closes: #2920
Signed-off-by: Artur Fijalkowski <artur.fijalkowski@ing.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 011270ca69)
On containerized deployment, the OSD entrypoint runs some ceph-volume
commands (lvm/simple scan and/or activate) which perform badly without
the ulimit option.
This option was added for all previous ceph-volume commands but not on
the ceph-osd container startup.
Also updating hard limit value to 4096 to reflect default baremetal
value.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9a4ac46d19)
The "run 'ceph-volume lvm batch --report' to see how many osds are to be
created" and "run 'ceph-volume lvm list' to see how many osds have already been
created" statements only register the lvm_batch_report and lvm_list variables.
Running those ceph-volume commands should never produce a change on the system.
Adding changed_when: false prevents irrelevant change messages from Ansible.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
(cherry picked from commit e11cbbbcb1)
This commit fixes a typo in roles/ceph-facts/tasks/facts.yml
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
(cherry picked from commit e1b9312084)
roles/ceph-validate/tasks/check_nfs.yml: fail on openSUSE Leap
using `ceph_origin = distro`, as the ganesha packages are not available from
the distribution repositories
Fixes: #4342
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
(cherry picked from commit 11aa5dbb58)
Otherwise rgw handler ends up with an error when using https.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9329bbb3af)
install packages on SUSE/openSUSE distributions, using the
same logic as on RedHat-based distributions
Fixes#4340
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
(cherry picked from commit c721cb99cb)
roles/ceph-common/tasks/installs/install_on_suse.yml: remove the task that
installs the dependencies, as this is done later in install_suse_packages.yml
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
(cherry picked from commit 504017d562)
This commits adds the `osd blacklist` cap on all OSP clients keyrings.
Fixes: #2296
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2d955757ee)
openSUSE switched from 'openSUSE 13.x' to 'openSUSE Leap 42.x' and then to
'openSUSE Leap 15.x' to align with SLES15 development.
The previous logic did not correctly allow the current release, as 15.x matched
the 'less than 42.3' condition.
For now only support openSUSE Leap 15.x, and extend support once 16.x is
released (or whatever the exact version will be)
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
(cherry picked from commit 5ee3d96fb4)
just like `ceph_osd_pool_default_size`, a pool size might change after an
initial deployment. Having this condition prevents from customizing the
pool in that case.
This is not needed so let's remove it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 70cf2a5846)
there is no need to use `shell` in these tasks. Let's use `command`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4df92152c0)
let's use `until` instead of doing test in bash using python oneliner
also, use `command` instead of `shell`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 687087fd43)
in order to use the right binary name when using python cli in command
or shell module.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 13815ad3ca)
There's no need to use `shell` module here.
Instead of using `| python -c`, let's use `from_json` filter.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5b9b841108)
When configuring grafana/prometheus embed in the mgr/dashboard, we need
to use the address of the grafana-server node and not the current
hostname because mgr/dashboard and grafana/prometheus could be present
on different hosts.
We should instead rely on the grafana_server_addr variable and remove
the dashboard_url.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4c6ec1dccb)
Because we need to execute commands from a monitor node (the first one
in the mons list) we are using delegate_to option.
If there's multiple nodes running the ceph-dashboard role then the
delegated task will be executed multiple times.
Also remove a mgr config-key option not present for nautilus+ releases.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f545b5be0d)
We don't have a reason to not apply firewall rules on the host when
using a containerized deployment.
The TripleO environments already manage the ceph firewall rules outside
ceph-ansible and set the configure_firewall variable to false.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1733251
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 771f25b1f8)
We don't need to create a grafana system user (in fact we even don't
set the righ uid to this user) because we're using a container setup.
Instead we just need to be sure to set the owner/group to 472 (grafana
user/group from the container) like we do for ceph/167.
We don't need to set the user/group recursively on /etc/grafana
directory in a dedicated task.
Also on Ubuntu system, the ceph-grafana-dashboards isn't present so on
non containerized deployment we won't have the
/etc/grafana/dashboards/ceph-dashboard directory present (coming with
the package) so we need to be sure it exists.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 34036c667c)
When creating OpenStack pools, we only check if the return code from
the pool list command isn't 0 (ie: if it doesn't exist). In that case,
the return code will be 2. That's why the next condition is rc != 0 for
the pool creation.
But in containerized deployment, the return code could be different if
there's a failure on the container engine command (like container not
running). In that case, the return code could but either 1 (docker) or
125 (podman) so we should fail at this point and not in the next tasks.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1732157
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d549fffdd2)
this commit adds two checks:
- check that the `[grafana-server]` group is defined
- check that the `[grafana-server]` contains at least one node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 02beb00916)
this tasks isn't using the right container_exec_cmd, that's delegating
to the wrong node.
Let's use the right fact to fix this command.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ec33ee7574)
According to this comment [1], this seems to be needed to detect wifi
devices.
In node exporter we can see this:
```
--collector.wifi Enable the wifi collector (default: disabled).
```
since it's enabled by default and we don't even change this in our
systemd templates for node-exporter, we can easily assume in the end
it's not needed. Therefore, let's remove this.
[1] dbf81b6b5b (diff-961545214e21efed3b84a9e178927a08L21-L23)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b9cdf341be)
There's no need to add complexity and trying to fallback on other group.
Let's deploy dashboard on all nodes present in grafana-server group.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d67230b2a2)
Some NBSP are still present in the yaml files.
Adding a test in travis CI.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 07c6695d16)
Those 2 directories should be renamed to be more generic (docker vs.
podman).
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 19950b5170)
This commit adds a when clause to avoid the setup of grafana
provisioners in a fully containerized scenario.
This is needed when the ceph-grafana-dashboards package is not
installed and this task could result in a wrong grafana
configuration that let the container crash.
Signed-off-by: fmount <fpantano@redhat.com>
(cherry picked from commit fac1b030cb)
The dashboard rgw frontend options only need to be applied when there's
some nodes present in the rgw ansible group.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5383c2f7f3)
The current port value for alertmanager, grafana, node-exporter and
prometheus is hardcoded in the roles so it's not possible to change the
port binding of those services.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8ab9b719fa)
Previously cephfs_pools items used to have a pgs: key but not
pgp_num: nor pg_num:
Signed-off-by: Giulio Fidente <gfidente@redhat.com>
(cherry picked from commit edd1420217)
fbf4ed42ae introduced a bug when
container binary is podman.
podman doesn't support ps -f using regular expression, the container id
is never set in the restart script causing the handler to fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1721536
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 618dbf271d)
ceph-volume will complain if gpt headers are found on devices.
This commit checks whether a gpt header is present on devices passed in
`devices` variable and fail early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1730541
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 487d701685)
Both ntp and chrony daemon use variable for the service name because it
could be different depending on the GNU/Linux distribution.
This has been update in 9d88d3199 for chrony but only for the start part
not for the handler.
The commit fixes this for both ntp and chrony.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 0ae0193144)
The Prometheus porrt 9090 isn't open in the firewall configuration.
Also the dashboard task on the grafana node was not required because
it's already present on the mgr node.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 41b44dde85)
since everything is already in a block with the same condition, it's not
needed to leave all of them on these tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ee29f7370a)
The message prints the whole content of the registered variable in the
playbook, this is not needed and makes the message pretty unclear and
unreadable.
```
"msg": "{'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, u'err': u'Error: Could not stat device /dev/sdf - No such file or directory.\\n', 'item': u'/dev/sdf', '_ansible_item_result': True, u'failed': False, '_ansible_item_label': u'/dev/sdf', u'msg': u\"Error while getting device information with parted script: '/sbin/parted -s -m /dev/sdf -- unit 'MiB' print'\", u'rc': 1, u'invocation': {u'module_args': {u'part_start': u'0%', u'part_end': u'100%', u'name': None, u'align': u'optimal', u'number': None, u'label': u'msdos', u'state': u'info', u'part_type': u'primary', u'flags': None, u'device': u'/dev/sdf', u'unit': u'MiB'}}, 'failed_when_result': False, '_ansible_ignore_errors': None, u'out': u''} is not a block special file!"
```
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1719023
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e6dc3ebd8c)
We are currently using incorrect dashboard default port. The upstream
uses 8443 instead of 8234 by default. This should get us closer to the
upstream project.
Signed-off-by: Boris Ranto <branto@redhat.com>
(cherry picked from commit 21758fcee8)
Some dashboard_rgw_api_* variables are using the bool filter but those
variables are strings with an empty string as default value.
So we should test the variable against an empty string instead of a
bool.
dashboard_rgw_api_host: ''
dashboard_rgw_api_port: ''
dashboard_rgw_api_scheme: ''
dashboard_rgw_api_admin_resource: ''
Resolves: #4179
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5413274412)
- Remove gateway_keyring from the configuration file because it's
not used in ceph-iscsi 3.x release.
- Use config_template instead of template module for iscsi-gateway
configuration file. Because the file is an ini file and we might want
to override more parameters than those present in ceph-ansible.
- Because we can now set the pool name in the configuration, we should
use a variable for that. This is refact with the iscsi_pool_* variables
also used to configure the pool size.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 1f2a4f1910)
c90f605b5 introduces the default ceph cluster name value in the rgw
socket path for the rgw restart script. But this should use the
`cluster` variable instead.
This commit also fixes this in the osd restart script.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit de7f948b75)
The ability to add nodes with the monitor role to an existing cluster
whose name differs from the default name is fixed.
Signed-off-by: ilyashestopalov <usr.tester@yandex.ru>
(cherry picked from commit 904532c5e2)
According to the OSP pattern, we need the package-install tag
to control what is installed on the host. This commit just add
the missing tag to meet the TripleO requirements.
See: /issues/4197 for details
Fixes: #4197
Signed-off-by: fmount <fpantano@redhat.com>
(cherry picked from commit 95bd002b35)
On containerized deployment we need to bind mount the ceph-iscsi
directory to avoid writing the logs in the container.
The /var/log/ceph directory isn't use by rbd-targe-api/gw services
because they have their own log directories.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 91bef94b6c)
This commit moves some old variables into ceph-defaults so we can move
the `use_new_ceph_iscsi` fact in ceph-facts role in order.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a781ce881c)
If the user is still using the older packages and does not setup
the target iqn you will just get a vague error message later on.
This adds a check during the validate task, so it is clear to the
user.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit 08a6d10c32)
Update iscsigws.yml.sample to document that we cannot use ansible to
setup iSCSI objects and use the new ceph-iscsi package.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit 75fee55d19)
This adds support for the ceph-iscsi package during install. ceph-iscsi
does not support setting up targets/gws, luns and clients with the
current library/igw_* code. Going forward those tasks should be done with
gwcli or dashboard. ceph-iscsi will only be used if the user has no iscsi
objects setup so we do not break existing setups.
The next patch will update the iscsigws.yml.sample to document that
users must not setup any iscsi object if they want to use the new
package and tools.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit cbe66cec52)
The gateway_ip_list is not used in container setups, so drop it
for that case.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit b7b2213be1)
Since Mimic the radosgw socket has two extra fields in the socket
name (before the .asok suffix): <pid>.<ctid>
Before:
/var/run/ceph/ceph-client.rgw.cephaio-1.asok
After:
/var/run/ceph/ceph-client.rgw.cephaio-1.16913.23928832.asok
The radosgw restart script doesn't handle this and could fail during
an upgrade.
If the SOCKETS variable isn't defined in the script then the test
command won't fail because the return code is 0
$ test -S
$ echo $?
0
There multiple issues in that script:
- The default SOCKETS value isn't defined due to a typo
SOCKET vs SOCKETS.
- Because the socket name uses the pid then we need to check the
socket name after the service restart.
- After restarting the radosgw service we need to wait few seconds
otherwise the socket won't be created.
- Update the wget parameters because the command is doing a loop.
We now use the same option than curl.
- The check_rest function doesn't test the radosgw at all due to
a wrong test command (test against a string) and always returns 0.
This needs to use the DOCKER_EXECS variable in order to execute the
command.
$ test 'wget http://192.168.100.11:8080'
$ echo $?
0
Also remove the test based on the ansible_fqdn because we only use
the ansible_hostname + rgw instance name.
Finally group all for loop into a single one.
Resolves: #3926
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c90f605b51)
This is necessary when configuring RGW with SSL because
in addition to passing specific frontend options, civetweb
appends the 's' character to the binding port and beast uses
ssl_endpoint instead of endpoint.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1722071
Signed-off-by: Giulio Fidente <gfidente@redhat.com>
(cherry picked from commit d526803c6c)
This environment variable was added in cb381b4 but was removed in
4d35e9e.
This commit reintroduces the change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 02fbe76e62)
This commit moves the package installation into ceph-dashboard role.
This is needed to install ceph dasboard json file in
`/etc/grafana/dashboards/ceph-dashboard/`.
Closes: #4026
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6e2e30db54)
- There is no need to open ports 3000, 8234, 9283 on all nodes.
- Add missing rule for alertmanager (port 9093)
Closes: #4023
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 14f5fc3c86)
when `dashboard_enabled` is `True`, let's append `dashboard` and
`prometheus` modules to `ceph_mgr_modules` so they are automatically
loaded.
Closes: #4026
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a2b6f44665)
As the bz1721914 describes, the grafana_server_addr
fact is not defined if ip_version used is ipv6.
This commit adds the ip_version condition to set
correctly this fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1721914
Signed-off-by: fmount <fpantano@redhat.com>
(cherry picked from commit e655038743)
If no grafana-server group is defined while an mgr group is, that task
will fail because `hostvars[groups[grafana_server_group_name][0]` can't
return anything since `groups['grafana-server']` will be a non existing
key.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 366b309c12)
To address this warning:
```
[DEPRECATION WARNING]: evaluating nfs_ganesha_dev as a bare variable, this
behaviour will go away and you might need to add |bool to the expression in the
future
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2b9fb377a8)
This task is already present in pre_requisite_non_container.yml
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit edb8d42596)
There's two big issues with the current OSD restart script.
1/ We try to test if the ceph osd daemon socket exists but we use a
wildcard for the socket name : /var/run/ceph/*.asok.
This fails because we usually have multiple ceph osd sockets (or
other ceph daemon collocated) present in /var/run/ceph directory.
Currently the test fails with:
bash: line xxx: [: too many arguments
But it doesn't stop the script execution.
Instead we can specify the full ceph osd socket name because we
already know the OSD id.
2/ The container filter pattern is wrong and could matches multiple
containers resulting the script to fail.
We use the filter with two different patterns. One is with the device
name (sda, sdb, ..) and the other one is with the OSD id (ceph-osd-0,
ceph-osd-15, ..).
In both case we could match more than needed.
$ docker container ls
CONTAINER ID IMAGE NAMES
958121a7cc7d ceph-daemon:latest ceph-osd-strg0-sda
589a982d43b5 ceph-daemon:latest ceph-osd-strg0-sdb
46c7240d71f3 ceph-daemon:latest ceph-osd-strg0-sdaa
877985ec3aca ceph-daemon:latest ceph-osd-strg0-sdab
$ docker container ls -q -f "name=sda"
958121a7cc7d
46c7240d71f3
877985ec3aca
$ docker container ls
CONTAINER ID IMAGE NAMES
2db399b3ee85 ceph-daemon:latest ceph-osd-5
099dc13f08f1 ceph-daemon:latest ceph-osd-13
5d0c2fe8f121 ceph-daemon:latest ceph-osd-17
d6c7b89db1d1 ceph-daemon:latest ceph-osd-1
$ docker container ls -q -f "name=ceph-osd-1"
099dc13f08f1
5d0c2fe8f121
d6c7b89db1d1
Adding an extra '$' character at the end of the pattern solves the
problem.
Finally removing the get_container_osd_id function because it's not
used in the script at all.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 45d46541cb)
The ansible_lsb fact is based on the lsb package (lsb-base,
lsb-release or redhat-lsb-core).
If the package isn't installed on the remote host then the fact isn't
populated.
--------
"ansible_lsb": {},
--------
Switching to the ansible_distribution_release fact instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit dc187ea6fa)
As per bz1718981, this commit adds higher values to check
the quorum status. This is helpful for several OSP deployments
that fail during the scale up.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1718981
Signed-off-by: fpantano <fpantano@redhat.com>
(cherry picked from commit ba73dc7b21)
The ceph-volume lvm list command takes ages to complete when having
a lot of LV devices on containerized deployment.
For instance, with 25 OSDs on a node it takes 3 mins 44s to list the
OSD.
Adding the max open files limit to the container engine cli when
executing the ceph-volume command seems to improve a lot thee
execution time ~30s.
This was impacting the OSDs creation with ceph-volume (both filestore
and bluestore) when using multiple LV devices.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1702285
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit b987534881)
We already set the become flag to true at a play level in the site*
playbooks so we don't need to set it at a task level.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7c3640177b)
`parted_results` isn't used anymore in the playbook.
By the way, `parted` seems to cause issue because it changes the
ownership on devices:
```
root@osd0 ~]# ls -l /dev/sdc*
brw-rw----. 1 root disk 8, 32 Jun 11 08:53 /dev/sdc
brw-rw----. 1 ceph ceph 8, 33 Jun 11 08:53 /dev/sdc1
brw-rw----. 1 ceph ceph 8, 34 Jun 11 08:53 /dev/sdc2
[root@osd0 ~]# parted -s /dev/sdc print
Model: ATA QEMU HARDDISK (scsi)
Disk /dev/sdc: 53.7GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 1075MB 1074MB ceph block.db
2 1075MB 2149MB 1074MB ceph block.db
[root@osd0 ~]# #We can see ownerships have changed from ceph:ceph to root:disk:
[root@osd0 ~]# ls -l /dev/sdc*
brw-rw----. 1 root disk 8, 32 Jun 11 08:57 /dev/sdc
brw-rw----. 1 root disk 8, 33 Jun 11 08:57 /dev/sdc1
brw-rw----. 1 root disk 8, 34 Jun 11 08:57 /dev/sdc2
[root@osd0 ~]#
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit eece362b38)
The definitions of cephfs pools should match openstack pools.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Co-Authored-by: Simone Caronni <simone.caronni@teralytics.net>
(cherry picked from commit 67071c3169)
The ceph-agent role was used only for RHCS 2 (jewel) so it's not
usefull anymore.
The current code will fail on CentOS distribution because the rhscon
package is only avaible on Red Hat with the RHCS 2 repository and
this ceph release is supported on stable-3.0 branch.
Resolves: #4020
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7503098ca0)
Because we're using vagrant, a ssh config file will be created for
each nodes with options like user, host, port, identity, etc...
But via tox we're override ANSIBLE_SSH_ARGS to use this file. This
remove the default value set in ansible.cfg.
Also adding PreferredAuthentications=publickey because CentOS/RHEL
servers are configured with GSSAPIAuthenticationis enabled for ssh
server forcing the client to make a PTR DNS query.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 34f9d51178)
Since timesyncd is not available on RHEL-based OSs, change the default
to chronyd for RHEL-based OSs. Also, chronyd is chrony on Ubuntu, so
set the Ansible fact accordingly.
Fixes: https://github.com/ceph/ceph-ansible/issues/3628
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 9d88d3199f)
if we don't assign the rbd application tag on this pool,
the cluster will get `HEALTH_WARN` state like following:
```
HEALTH_WARN application not enabled on 1 pool(s)
POOL_APP_NOT_ENABLED application not enabled on 1 pool(s)
application not enabled on pool 'rbd'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4cf17a6fdd)
Ubuntu-based CI jobs often fail with error code 404 while installing
NTP daemons. Updating cache beforehand should fix the issue.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit d1c266e6c7)
069076b introduced a bug in the systemd unit script template. This
commit fixes the options used by the node-exporter container.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d0840217f3)
Add a variable to support the allow_embedding support.
See ceph/ceph-ansible/issues/4084 for details.
Fixes: #4084
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 27856cc499)
This setting must be set to something resolvable.
See: ceph/ceph-ansible/issues/4085 for details
Fixes: #4085
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2c9cd9d9e7)
We're using fuser command to see if a process is using a ceph unix
socket file. But the fuser command runs through every PID present in
/proc/<PID> to see if one of them is using the file.
On a system running thousands processes, the fuser command can take
a long time to finish.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1717011
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit da9891da1e)
Instead of using the modprobe command from the path in the systemd
unit script, we can use the modprobe ansible module.
That way we don't have to manage the binary path based on the linux
distribution.
Resolves: #4072
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit dbf81b6b5b)
Few fixes on systemd unit templates for node_exporter and
alertmanager container parameters.
Added the ability to use a dedicated instance to deploy the
dashboard components (prometheus and grafana).
This commit also introduces the grafana_group_name variable
to refer grafana group and keep consistency with the other
groups.
During the integration with TripleO some grafana/prometheus
template variables resulted undefined. This commit adds the
ability to check if the group exist and create, accordingly,
different job groups in prometheus template.
Signed-off-by: fmount <fpantano@redhat.com>
(cherry picked from commit 069076bbfd)
Currently we're only able to use podman on ubuntu if podman's
installation is done manually before the ceph-ansible execution
because the deb package is present in an external repository.
We already manage the docker-ce installation via an external
repository so we should be able to allow the podman installation
with the same mechanism too.
https://github.com/containers/libpod/blob/master/install.md#ubuntuResolves: #3947
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 518ab794fb)
When using podman, the systemd unit scripts don't have a dependency
on the network. So we're not sure that the network is up and running
when the containers are starting.
With docker this behaviour is already handled because the systemd
unit scripts depend on docker service which is started after the
network.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f49090df7e)
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
(cherry picked from commit ab54fe20ec)
This add support for rgw loadbalancer based on HAProxy and Keepalived.
We define a single role ceph-rgw-loadbalancer and include HAProxy and
Keepalived configurations all in this.
A single haproxy backend is used to balance all RGW instances and
a single frontend is exported via a single port, default 80.
Keepalived is used to maintain the high availability of all haproxy
instances. You are free to use any number of VIPs. A single VIP is
shared across all keepalived instances and there will be one
master for one VIP, selected sequentially, and others serve as
backups.
This assumes that each keepalived instance is on the same node as
one haproxy instance and we use a simple check script to detect
the state of each haproxy instance and trigger the VIP failover
upon its failure.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
(cherry picked from commit 35d40c65f8)
if `nfs_obj_gw` is True when deploying an internal ganesha with an
external ceph cluster, `ceph_nfs_rgw_access_key` and
`ceph_nfs_rgw_secret_key` must be provided so the
ganesha configuration file can be generated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 003aeea45a)
This commits allows to deploy an internal ganesha with an external ceph
cluster.
This requires to define `external_cluster_mon_ips` with a comma
separated list of external monitors.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710358
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6a6785b719)
Otherwise content in /run/udev is mislabeled and prevent some services
like NetworkManager from starting.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 80875adba7)
the rhel8 image used is an outdated beta version, it is not worth it to
maintain this image upstream, since it's possible to test podman with a
newer version of centos/atomic-host image.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a78fb209b1)
789cef7 introduces a regression in the ganesha configuration file
generation. The new config_template module version broke it.
But the ganesha.conf file isn't an ini file and doesn't really
need to use the config_template module. Instead we can use the
classic template module.
Resolves: #4045
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 616c484698)
The fsid generation is done via a python command. When the ansible
controller node only have python3 available (like RHEL 8) then the
python command isn't necessarily present causing the fsid generation
to fail.
We already do some resource creation (like ceph keyring secret) with
the python command too but from the mon node so we should do the same
for fsid.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1714631
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit daf92a9e1f)
This commit splits the current `ceph-container-common` role.
This introduces a new role `ceph-container-engine` which handles the
tasks specific to the installation of containers tools (docker/podman).
This is needed for the ceph-dashboard implementation for 2 main reasons:
1/ Since the ceph-dashboard stack is only containerized, we must install
everything needed to run containers even in non containerized
deployments. Splitting this role allows us to not have to call the full
`ceph-container-common` role which would run a bunch of unneeded tasks
that would have been skipped anyway.
2/ The current implementation would have required to run
`ceph-container-common` on all ceph-clients nodes which would have been
conflicting with 9d3517c670 (we don't want
to run ceph-container-common on all client nodes, see mentioned commit
for more details)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 55420d6253)
The ceph mgr dashboard requires routes python library to be installed
on the system.
Resolves: #3995
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f37edfa113)
gpg package isn't available for all Debian/Ubuntu distribution but
gnupg is.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 622d9feae9)
As of nautilus, if you set `ms bind ipv6 = True` you must explicitly set
`ms bind ipv4 = False` too, otherwise OSDs will still try to pick up an
IPv4 address.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710319
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6ca7372a2d)
Because ansible_distribution_version doesn't return minor version on
CentOS with ansible 2.8 we can apply the selinux anyway but only for
CentOS/RHEL 7.
Starting RHEL 8, there's a dedicated package for selinux called
nfs-ganesha-selinux [1].
Also replace the command module + semanage by the selinux_permissive
module.
[1] https://github.com/nfs-ganesha/nfs-ganesha/commit/a7911f
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 0ee833432e)
Ceph iSCSI gateway requires Red Hat Enterprise Linux or CentOS 7.5
or later.
Because we can not check the ansible_distribution_version fact for
CentOS with ansible 2.8 (returns only the major version) we can
fallback by checking the kernel option.
- CONFIG_TARGET_CORE=m
- CONFIG_TCM_USER2=m
- CONFIG_ISCSI_TARGET=m
http://docs.ceph.com/docs/master/rbd/iscsi-target-cli-manual-install/
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 0c7fd79865)
When using a minimal Debian/Ubuntu distribution there's no
ca-certificates and gpg packages installed so the apt modules will
fail:
Failed to find required executable gpg in paths:
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
apt.cache.FetchFailedException:
W:https://download.ceph.com/debian-luminous/dists/bionic/InRelease:
No system certificates available. Try installing ca-certificates.
Resolves: #3994
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 494746b7a6)
There is no need to have default values for these variables in each roles
since there is no corresponding host groups
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9f0d4d6847)
This commit renames the `docker_exec_cmd` variable to
`container_exec_cmd` so it's more generic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e74d80e72f)
This commit aligns the way the different containers are managed with how
it's currently done with the other ceph daemon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cc285c417a)
make `dashboard_rgw_api_no_ssl_verify` a bool variable since it seems to
be used as it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cd5f3fca64)
since stable-4.0 isn't to deploy ceph releases prior to nautilus,
there's no need to add this complexity here.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4405f50c85)
use site.yml to deploy ceph-container-common in order to install docker
even in non-containerized deployments since there's no RPM available to
deploy the differents applications needed for ceph-dashboard.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cdff0da7d4)
there is no need to add more complexity for this, let's use
`containerized_deployment` in order to detect if we are running a
containerized deployment.
The idea is to use `container_exec_cmd` the same way we do in the rest of
the playbook to run the different ceph commands needed to deploy the
ceph-dashboard role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 742bb6214c)
This is needed for the ceph-dashboard implementation since it requires
to run containerized application which aren't packaged as RPMs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6d9dbb1d39)
add .j2 to all templates file related to dashboard roles.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3578d576a4)
This adds support for podman in dashboard-related roles. It also drops
the creation of custom network for the dashboard-related roles as this
functionality works in a different way with podman.
Signed-off-by: Boris Ranto <branto@redhat.com>
(cherry picked from commit b4d1c3693b)
We cannot use the old fashioned config-key way, here. It was not
supported when the option was introduced (post 14.2.0). Since the option
is not always supported we can simply ignore the potential failure on
ceph clusters that do not support it.
Signed-off-by: Boris Ranto <branto@redhat.com>
(cherry picked from commit e737a1f83e)
This commit adds a list of alerting rules for ceph-dashboard from the
old cephmetrics project. It also installs the configuration file so that
the rules get recognized by the prometheus server.
Signed-off-by: Boris Ranto <branto@redhat.com>
(cherry picked from commit 8f77caa932)
This commit will merge dashboard-ansible installation scripts with
ceph-ansible. This includes several new roles to setup ceph-dashboard
and the underlying technologies like prometheus and grafana server.
Signed-off-by: Boris Ranto & Zack Cerza <team-gmeno@redhat.com>
Co-authored-by: Zack Cerza <zcerza@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2f141a6e80)
Currently podman installation is very tied to RHEL 8 even if we're
able to install it on Debian/Ubuntu distribution.
This patch changes the way we are starting or not the (fat) container
daemon. Before the condition was based on the distribution release
and now on the container_service_name variable.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d2ad191eca)
If we do this in one line we get the error described in #3968fixes#3968
Signed-off-by: Bruceforce <markus.greis@gmx.de>
(cherry picked from commit c3b0ee30a1)
RHCS 4 will be based on Nautilus and only usable on RHEL 8.
Updated the default ceph_rhcs_version to 4 and update the rhcs
repositories to rhcs 4 with RHEL 8.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ba49225eab)
The old condition would resolve to
"when": "nfs_ganesha_stable - ceph_repository == 'community'"
now it is
"when": [
"nfs_ganesha_stable",
"ceph_repository == 'community'"
]
Please backport to stable-4.0
Signed-off-by: Bruceforce <markus.greis@gmx.de>
(cherry picked from commit 29f2c953b4)
Set the application to rgw for pools created from rgw_create_pools. On Ceph Nautilus the heath is set to HEALTH_WARN with the message "application not enabled on X pool(s)" if an application isn't specified for a pool.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
(cherry picked from commit 381c58ca3e)
Use blocks for similar tasks in main.yml. And move when keywords before
block keywords.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 121b5e4184)
running an external ceph cluster deployment with (obviously) no
monitors defined in inventory breaks with an undefined error because
`_monitor_addresses` never get defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1707460
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 936c6fca78)
Except for some corner case, it's not correct to access some other
node's copy of variable docker_exec_cmd. Therefore replace
"hostvars[groups[mon_group_name][0]]['docker_exec_cmd']" by
"docker_exec_cmd".
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 89748d579a)
Add code in ceph-mgr for creating a keyring for manager in so that
managers can be deployed on a separate node too.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 56bfec7c58)
Adds "check_mode: no" to commands which register cluster state in a
variable and don't modify anything. These commands have to run in order
to support running the playbook in check mode.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 3c8987c7a5)
Keywords requiring only one item shouldn't express it by creating a
list with single item.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 739a662c80)
Conflicts:
roles/ceph-mon/tasks/ceph_keys.yml
roles/ceph-validate/tasks/check_devices.yml
This will be removed in ansible 2.8 and breaks the playbook execution
with this release.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ae266c6f2b)
In containerized deployment the default mds cpu quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1695850
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 1999cf3d19)
In containerized deployment the default osd cpu quota is too low
for production environment using NVMe devices.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1695880
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c17106874c)
Only rbd-target-api and rbd-target-gw were started/enabled for non
containerized deployment.
The issue doesn't happen with containerized setup.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4ae5ce399b)
Otherwise the reader is forced to search for "when" when blocks are too
long.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit e0beaf123a)
Conflicts:
roles/ceph-config/tasks/main.yml
roles/ceph-container-common/tasks/pre_requisites/prerequisites.yml
roles/ceph-validate/tasks/check_devices.yml
1/ The OSD already supports cpuset to be used for containerized deployments
through the use of the ceph_osd_docker_cpuset_cpus variable. This adds similar
support to the RGW service for containerized deployments by setting a new
variable named ceph_rgw_docker_cpuset_cpus. Like the OSD, there are times where
using distinct cores has advantages over using the CFS in kernel scheduler.
ceph_rgw_docker_cpuset_cpus accepts a comma delimited set of CPU ids
2/ Add support for specifying --cpuset-mem variable to restrict the cgroup's memory
allocations to a particular numa node, which should typically correspond with
the cpu ids of that numa node that were provided with --cpuset-cpus. To ensure
the correct cpu ids are used one can run `numactl --hardware` to list the nodes
and which cpu ids correspond to each.
Signed-off-by: Kyle Bader <kbader@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0bee90b201)
Until now it was not possible to install a specific container package
because it was somehow hardcoded.
This patch allows to override the container package name (docker.io
vs docker-ce) and refacts the package installation. This could be
achieve via the container_package_name variable.
Instead of using one task per distribution we can set the package and
service name in vars. This allows to have a unified package task.
Also refactorize the debian_prerequisites tasks because the content
was outdated.
https://docs.docker.com/install/linux/docker-ce/debian/https://docs.docker.com/install/linux/docker-ce/ubuntu/Resolves: #3609
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8105a1cefb)
We do this so that the ceph-config role can most accurately
report the number of osds for the generation of the ceph.conf
file.
We don't want to use ceph-volume to determine the number of
osds because in an upgrade to nautilus ceph-volume won't be able to
accurately count osds created by ceph-disk.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 67453853ff)
When performing a rolling update do not try to create
any new osds with `ceph-volume lvm batch`. This is troublesome
because when upgrading to nautilus the devices list might contain
devices that are currently being used by ceph-disk and have GPT
headers on them, which will cause ceph-volume to fail when
trying to use such a device. Any devices originally created
by ceph-disk will need to be removed from the devices list
before any new osds can be created.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 5e3dfe5021)
Since Nautilus there's mgr extra modules not present in ceph-mgr
package but in dedicated packages.
Resolves: #3860
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 86315272c7)
this commit refact the msgr2 protocol introduction.
If it's a fresh install, let's go with v2 only.
If we upgrade to nautilus, we should go with v2+v1 syntax to ensure
nothing breaks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a4bc7bda51)
The library directory that contain the custom ceph modules in present
in the ceph-ansible root directory.
All igw_* mocules are already present there so we don't need the one
present in roles/ceph-iscsi-gw/library.
Also remove the associated spec file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c8814d1331)
this task has nothing to do in stable-4.0 and after.
Let's remove it since stable-4.0 and after aren't intended to deploy
luminous.
Closes: #3873
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 58f3851573)
Currently we only support ansible 2.7
We plan to use 2.8 when it will be release so we have to support both
2.7 and 2.8.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1700548
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit e471bce76b)
Because 5c98e361df could be seen as a non
backward compatible change this commit reverts it and bring back package
dependencies installation support.
Let's just modify the default value instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit edfa4310d3)
These packages aren't needed anymore.
They were needed for ceph-init-detect buti as of ceph-init-detect doesn't exist
anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1683885
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5c98e361df)
When adding a new monitor, we must reuse the existing initial monitor
keyring. Otherwise, the new monitor will issue its 'mkfs' with a new
monitor keyring and it will result with a mismatch between them. The
new monitor will be unable to join the quorum in the end.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit edf1ee2073)
these files aren't needed anymore since we only use lvm scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4f68462009)
This variable was related to ceph-disk scenarios.
Since we are entirely dropping ceph-disk support as of stable-4.0, let's
remove this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f0416c8892)
As of stable-4.0, the only valid scenario is `lvm`.
Thus, this makes this variable useless.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4d35e9eeed)
ceph_disk_cli_options_facts.yml is not used anymore, let's remove it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4d5637fd8a)
We only validate the devices that are passed if there is a list of
devices to validate.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 2888c0825f)
osd_scenario has become obsolete and defaults to lvm. With lvm there is
no such things has collocated and non-collocated.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 52df15895b)
ceph-disk is not supported anymore, so all the newly created OSDs will
be configured using ceph-volume.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 9ea1e49407)
We don't support the preparation of OSD with ceph-disk. ceph-volume is
only supported. However, the start operation of OSD is still supported.
So let's say you change a config option, the handlers will be able to
restart all the OSDs via their respective systemd unit files.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e2a5aa062e)
We don't need to use the cephfs variable for the application pool
name because it's always cephfs.
If the cephfs variable is set to something else than the default
value it will break the appplication pool task.
Resolves: #3790
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d2efb7f02b)
ceph-volume didn't work when the devices where passed by path.
Since it now support it, let's allow this feature in ceph-ansible
Closes: #3812
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7e0adca7a4)
As discussed in ceph/ceph#26599, beast is now the default frontend
for rados gateway with nautilus release.
Add rgw_thread_pool_size variable with 512 as default value and keep
backward compatibility with num_threads option when using civetweb.
Update radosgw_civetweb_num_threads to reflect rgw_thread_pool_size
change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d17b1b48b6)
Let's use a condition to run this task only on the first mon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 631e5d3144)
The Ubuntu Cloud Archive-related (UCA) defaults in
roles/ceph-defaults/defaults/main.yml were commented out, which means
if you set `ceph_repository` to "uca", you get undefined variable
errors, e.g.
```
The task includes an option with an undefined variable. The error was: 'ceph_stable_repo_uca' is undefined
The error appears to have been in '/nfs/users/nfs_m/mv3/software/ceph-ansible/roles/ceph-common/tasks/installs/debian_uca_repository.yml': line 6, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- name: add ubuntu cloud archive repository
^ here
```
Unfortunately, uncommenting these results in some other breakage,
because further roles were written that use the fact of
`ceph_stable_release_uca` being defined as a proxy for "we're using
UCA", so try and install packages from the bionic-updates/queens
release, for example, which doesn't work. So there are a few `apt` tasks
that need modifying to not use `ceph_stable_release_uca` unless
`ceph_origin` is `repository` and `ceph_repository` is `uca`.
Closes: #3475
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit 9dd913cf8a)
docker daemon is automatically started during package installation
but the service isn't enabled on boot.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 37816570c6)
Add a tox scenario that adds an new MDS node as a part of already
deployed Ceph cluster and deploys MDS there.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit c0dfa9b61a)
When using monitor_address_block or radosgw_address_block variables
to configure the mon/rgw address we're getting the first ip address
from the ansible facts present in that cidr.
When there's VIP on that network the first filter could return the
wrong value.
This seems to affect only IPv6 setup because the VIP addresses are
added to the ansible facts at the beginning of the list. This is the
opposite (at the end) when using IPv4.
This causes the mon/rgw processes to bind on the VIP address.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1680155
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit fd4b0ec7eb)
The path of the RGW environment file (in the /var/lib/ceph/radosgw/
directory) depends on the Ceph clustername. It was not taken into
account in the Ansible role `ceph-rgw`.
Signed-off-by: flaf <francois.lafont.1978@gmail.com>
(cherry picked from commit 4c3e77d869)
When mgrs are implicitly collocated on monitors (no mgrs in mgrs group).
That include was skipped because of this condition :
`inventory_hostname == groups[mgr_group_name][0]`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cbfdbab177)
before managing mgr modules, we must ensure all mgr are available
otherwise we can hit failure like following:
```
stdout:Error ENOENT: all mgr daemons do not support module 'restful', pass --force to force enablement
```
It happens because all mgr are not yet available when trying to manage
with mgr modules.
Closes: #3100
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f596cc1711)
According to rdo testing https://review.rdoproject.org/r/#/c/18721
a check on the output of the ceph_health value is added to
allow the playbook to make several attempts (according to the
retry/delay variables) when waiting the cluster quorum or
when the container bootstrap is not ended.
It avoids the failure of the command execution when it doesn't
receive a valid json object to decode (because cluster is too
slow to boostrap compared to ceph-ansible task execution).
Signed-off-by: fpantano <fpantano@redhat.com>
(cherry picked from commit afbb90e4ac)
In containerized deployment the default radosgw quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1680171
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d3ae9fd05f)
Since https://github.com/ceph/ceph/commit/77912c0 ceph-volume uses
stdout encoding based on LC_CTYPE and PYTHONIOENCODING environment
variables.
Thoses variables aren't set when using ansible.
Currently this commit breaks non containerized deployment on Ubuntu.
TASK [use ceph-volume to create bluestore osds] ********************
cmd:
- ceph-volume
- --cluster
- ceph
- lvm
- create
- --bluestore
- --data
- /dev/sdb
rc: 1
stderr: |-
Traceback (most recent call last):
(...)
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in
position 132: ordinal not in range(128)
Note that the task is failing on ansible side due to the stdout
decoding but the osd creation is successful.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7e5e4229b7)
Similar to #3658
Since there's too many changes between master and stable branches let's
commit directly in each branches instead of trying to backport this
commit.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When installing python-minimal on Ubuntu bionic, this will add the
/usr/bin/python symlink to the default python interpreter.
On bionic, this isn't python2 but python3.
$ /usr/bin/python --version
Python 3.6.7
The python docker library is only installed for python2 which causes
issues when running the purge-docker-cluster playbook. This playbook
uses the ansible docker modules and requires to have python bindings
installed on the remote host.
Without the bindings we can see python error reported by the docker
module.
msg: Failed to import docker or docker-py - No module named 'docker'.
Try `pip install docker` or `pip install docker-py` (Python 2.6)
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
sometimes those tasks might fail because of a timeout.
I've been facing this several times in the CI, adding this retry might
help and won't hurt in any case.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a couple of fixes to allow containerized deployments upgrade support
to upgrade from luminous/mimic to nautilus.
- pass CEPH_CONTAINER_IMAGE and CEPH_CONTAINER_BINARY environment
variable to the ceph_key module,
- fix the docker exec command in 'waiting for the containerized monitor
to join the quorum' task according to the `delegate_to` parameter,
- override `docker_exec_cmd` in `ceph-facts` with `mon_host` when
rolling_update is `True`,
- do not run unnecessarily `create_mds_filesystems.yml` when performing an
upgrade.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This prevents the packaging from restarting services before we do need
to restart them in the rolling update sequence.
We want to handle services restart at rolling_update playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of nautilus, the initial keyrings list has changed, it means when
upgrading from Luminous or Mimic, it is expected there's a mismatch
between what is found on the cluster and the expected initial keyring
list hardcoded in ceph_key module. We shouldn't fail when upgrading to
nautilus.
str_to_bool() took from ceph-volume.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-Authored-by: Alfredo Deza <adeza@redhat.com>
rolling_update playbook already takes care of stopping/starting services
during the sequence. There's no need to trigger potential unwanted
services restart.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using osd_scenario lvm, we never check if the lvm2 package is
present on the host.
When using containerized deployment and docker on CentOS/RedHat this
package will be automatically installed as a dependency but not for
Ubuntu distribution.
OSD deployed via ceph-volume require the lvmetad.socket to be active
and running.
Resolves: #3728
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since all files in container image have moved to `/opt/ceph-container`
this check must look for new AND the old path so it's backward
compatible. Otherwise it could end up by templating an inconsistent
`ceph-osd-run.sh`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using monitor_address_block to determine the ip address of the
monitor node, we need an ip address available in that cidr to be
present in the ansible facts (ansible_all_ipv[46]_addresses).
Currently we don't check if there's an ip address available during
the ceph-validate role.
As a result, the ceph-config role fails due to an empty list during
ceph.conf template creation but the error isn't explicit.
TASK [ceph-config : generate ceph.conf configuration file] *****
fatal: [0]: FAILED! => {"msg": "No first item, sequence was empty."}
With this patch we will fail before the ceph deployment with an
explicit failure message.
Resolves: rhbz#1673687
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using community repository we need to set the priority on the
ceph repositories because we could have some conflict with EPEL
packages.
In order to set the priority on the ceph repositories, we need to
install the yum-plugin-priorities package.
http://docs.ceph.com/docs/master/install/get-packages/#rpm-packages
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the task will be delegated to mons[0] for all mgr hosts, so we can just run it on the first host and have the same effect.
Signed-off-by: wumingqiao <wumingqiao@beyondcent.com>
Currently the default crush rule value is added to the ceph config
on the mon nodes as an extra configuration applied after the template
generation via the ansible ini module.
This implies two behaviors:
1/ On each ceph-ansible run, the ceph.conf will be regenerated via
ceph-config+template and then ceph-mon+ini_file. This leads to a
non necessary daemons restart.
2/ When other ceph daemons are collocated on the monitor nodes
(like mgr or rgw), the default crush rule value will be erased by
the ceph.conf template (mon -> mgr -> rgw).
This patch adds the osd_pool_default_crush_rule config to the ceph
template and only for the monitor nodes (like crush_rules.yml).
The default crush rule id is read (if exist) from the current ceph
configuration.
The default configuration is -1 (ceph default).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1638092
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
With 3e32dce we can run OSD containers with numactl support.
When using numactl command in a containerized deployment we need to
be sure that the corresponding package is installed on the host.
The package installation is only executed when the
ceph_osd_numactl_opts variable isn't empty.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to set After=docker.service when the container_binary
variable isn't set to docker.
It doesn't break anything currently but it could be confusing when
using podman.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Dimitri Savineau
Johannes Kastl
guihecheng
Artur Fijalkowski
Kevin Coakley
Guillaume Abrioux
fmount
Giulio Fidente
Boris Ranto
ilyashestopalov
Mike Christie
Rishabh Dave
L3D
Bruceforce
Gaudenz Steinlin
Kyle Bader
Radu Toader
Andrew Schoen
Sébastien Han
Matthew Vernon
François Lafont
Ali Maredia
wumingqiao