This commit increases the default values for the following variable
consumed in switch-from-non-containerized-to-containerized-ceph-daemons.yml
playbook.
This also moves these variables in `ceph-defaults` role so the user can
set different values if needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1783223
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This wasn't necesarry. The container image was fixed on the
RedHat's registry
This reverts commit 3bd250c742.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
RHCS 4 is available for both RHEL 7 and 8 so we should also enable the
cdn repositories for that distribution.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1796853
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The [rgw] section in the ceph.conf file or via the ceph_conf_overrides
variable doesn't exist and has no effect.
To apply overrides to all radosgw instances we should use either the
[global] or [client] sections.
Overrides per radosgw instance should still use the
[client.rgw.{instance-name}] section.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1794552
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit adds a task to make sure user set a custom password for
`grafana_admin_password` and `dashboard_admin_password` variables.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1795509
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since this variable makes it possible to customize the mode for ceph
directories, let's make it a bit more explicit by adding a default value
in ceph-defaults.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There's no need to define a variable via a fact if we can do it via a
default value. Using a fact could be interesseting to override the
default value on some condition.
- ceph_uid could be set to 167 by default because it's only different on
non containerized deployment on Debian/Ubuntu.
- rbd_client_directory_{owner,group,mode} could be set to ceph,ceph,0770
by default install of null as we are doing in the facts.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In fc02fc9 the group_vars samples have been generated but only for
monitor_address variable not radosgw_address.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
To avoid confusion, let's change the default value from `0.0.0.0` to
`x.x.x.x`.
Users might think setting `0.0.0.0` will make the daemon binding on all
interfaces.
Fixes: #4827
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit isolates and adds an explicit comment about variables not
intended to be modified by the user.
Fixes: #4828
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
A recent change in ceph/ceph prevent from having username in the
password:
`Error EINVAL: Password cannot contain username.`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The md devices (RAID software) aren't excluded from the devices list in
the auto discovery scenario.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1764601
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Add ceph_docker_registry_username and ceph_docker_registry_password
variables in ceph-defaults role so they will be present in the group_vars
samples but commented.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1763139
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't have to use ceph_iscsi_config_dev (default true) on RHCS
because all iscsi packages are already included in the RHCS
repositories.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to have dedicated variables for the RGW integration into
the Ceph Dashboard and need to be manually filled.
Instead we can use the current values from the RGW nodes by using the
IP and port from the first RGW instance of the first RGW node via the
radosgw_address and radosgw_frontend_port variables.
We don't need to specify all RGW nodes, this will be done automatically
with one node.
The RGW api scheme is using the radosgw_frontend_ssl_certificate variable
to determine if the value is http or https. This variable is also reuse
as a condition for the ssl verify task.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The old default prometheus port 9090 clashes with cockpit in rhel 8. The
9090 port is reserved for web service administration of machines. We
should change the default to something that does not clash with other
ports used in rhel 8, at least by default. The port 9092 seems like a
good choice in my testing.
Signed-off-by: Boris Ranto <branto@redhat.com>
For some reason, the floating tags were changed from v4.1 to just 4.1
for these images when switching ti registry.redhat.io. We should fix
the locations.
We are also changing the downstream grafana image to the one we used for
rhcs 3. The ose grafana image lacks the support for a lot of features
that we need (e.g. vonage and piechart grafana plugins, grafana-cli
binary and others).
Signed-off-by: Boris Ranto <branto@redhat.com>
The package python-xml is needed for ansible's zypper module to interact with
the zypper package management tool.
roles/ceph-defaults/defaults/main.yml:
Remove python-xml from variable suse_package_dependencies to only
install python-xml on SUSE/openSUSE if python is not found.
raw_install_python.yml already contains all the logic needed to check
if there is a valid python installation, so this is better suited there.
openSUSE Leap 15.x / SLES 15.x do no longer have /usr/bin/python,
only /usr/bin/python3, which already contains the xml module, so
nothing needs to be installed in that case.
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
The registry.redhat.io regsitry requires authentication so before pulling
the RHCS 4 container images from the registry we need to do the login
step.
This is done via the new ceph_docker_registry_auth variable. The
default value is false but true for RHCS setup.
When set to true, you need to provide the username and password
for the registry via the associated variables.
This patch also updates the ceph_docker_registry value for RHCS setup.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1748911
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We should pin down the versions of downstream container for dashboard
instead of using upstream containers.
Signed-off-by: Boris Ranto <branto@redhat.com>
This commit also remove the notify on new added debian repo,
force update_cache to yes and define sample ceph_custom_key vars.
Signed-off-by: Anthony Rusdi <33247310+antrusd@users.noreply.github.com>
Instead of hardcoding `luminous`, use the `ceph_stable_release` variable
to point to the correct repository.
This is now uncommented in roles/ceph-defaults/defaults/main.yml to be
available, as it is only used if ceph_repository is set to 'obs'.
group_vars/*.sample files have been regenerated using the
./generate_group_vars_sample.sh script.
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
This reverts commit 2d955757ee.
The "osd blacklist" isn't an osd caps but should be used with mon caps.
Also the correct caps for this is: 'allow command "osd blacklist"'.
The current change is breaking the openstack and clients keyrings.
By using the profile rbd (which is already used) we already rely on the
ability to blacklist dead client.
Resolves: #4385
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When configuring grafana/prometheus embed in the mgr/dashboard, we need
to use the address of the grafana-server node and not the current
hostname because mgr/dashboard and grafana/prometheus could be present
on different hosts.
We should instead rely on the grafana_server_addr variable and remove
the dashboard_url.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
There's no need to add complexity and trying to fallback on other group.
Let's deploy dashboard on all nodes present in grafana-server group.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The current port value for alertmanager, grafana, node-exporter and
prometheus is hardcoded in the roles so it's not possible to change the
port binding of those services.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We are currently using incorrect dashboard default port. The upstream
uses 8443 instead of 8234 by default. This should get us closer to the
upstream project.
Signed-off-by: Boris Ranto <branto@redhat.com>
This commit moves some old variables into ceph-defaults so we can move
the `use_new_ceph_iscsi` fact in ceph-facts role in order.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is necessary when configuring RGW with SSL because
in addition to passing specific frontend options, civetweb
appends the 's' character to the binding port and beast uses
ssl_endpoint instead of endpoint.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1722071
Signed-off-by: Giulio Fidente <gfidente@redhat.com>
The ansible_lsb fact is based on the lsb package (lsb-base,
lsb-release or redhat-lsb-core).
If the package isn't installed on the remote host then the fact isn't
populated.
--------
"ansible_lsb": {},
--------
Switching to the ansible_distribution_release fact instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
As per bz1718981, this commit adds higher values to check
the quorum status. This is helpful for several OSP deployments
that fail during the scale up.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1718981
Signed-off-by: fpantano <fpantano@redhat.com>
Since timesyncd is not available on RHEL-based OSs, change the default
to chronyd for RHEL-based OSs. Also, chronyd is chrony on Ubuntu, so
set the Ansible fact accordingly.
Fixes: https://github.com/ceph/ceph-ansible/issues/3628
Signed-off-by: Rishabh Dave <ridave@redhat.com>
The definitions of cephfs pools should match openstack pools.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Co-Authored-by: Simone Caronni <simone.caronni@teralytics.net>
Add a variable to support the allow_embedding support.
See ceph/ceph-ansible/issues/4084 for details.
Fixes: #4084
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Few fixes on systemd unit templates for node_exporter and
alertmanager container parameters.
Added the ability to use a dedicated instance to deploy the
dashboard components (prometheus and grafana).
This commit also introduces the grafana_group_name variable
to refer grafana group and keep consistency with the other
groups.
During the integration with TripleO some grafana/prometheus
template variables resulted undefined. This commit adds the
ability to check if the group exist and create, accordingly,
different job groups in prometheus template.
Signed-off-by: fmount <fpantano@redhat.com>
This add support for rgw loadbalancer based on HAProxy and Keepalived.
We define a single role ceph-rgw-loadbalancer and include HAProxy and
Keepalived configurations all in this.
A single haproxy backend is used to balance all RGW instances and
a single frontend is exported via a single port, default 80.
Keepalived is used to maintain the high availability of all haproxy
instances. You are free to use any number of VIPs. A single VIP is
shared across all keepalived instances and there will be one
master for one VIP, selected sequentially, and others serve as
backups.
This assumes that each keepalived instance is on the same node as
one haproxy instance and we use a simple check script to detect
the state of each haproxy instance and trigger the VIP failover
upon its failure.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
This commits allows to deploy an internal ganesha with an external ceph
cluster.
This requires to define `external_cluster_mon_ips` with a comma
separated list of external monitors.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710358
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There is no need to have default values for these variables in each roles
since there is no corresponding host groups
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit renames the `docker_exec_cmd` variable to
`container_exec_cmd` so it's more generic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds support for podman in dashboard-related roles. It also drops
the creation of custom network for the dashboard-related roles as this
functionality works in a different way with podman.
Signed-off-by: Boris Ranto <branto@redhat.com>
This commit will merge dashboard-ansible installation scripts with
ceph-ansible. This includes several new roles to setup ceph-dashboard
and the underlying technologies like prometheus and grafana server.
Signed-off-by: Boris Ranto & Zack Cerza <team-gmeno@redhat.com>
Co-authored-by: Zack Cerza <zcerza@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
RHCS 4 will be based on Nautilus and only usable on RHEL 8.
Updated the default ceph_rhcs_version to 4 and update the rhcs
repositories to rhcs 4 with RHEL 8.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
b2f2426 didn't use the generate_group_vars_sample.sh script so we
currently have a difference between the content in group_vars and the
ceph-defaults/defaults directories.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
this commit refact the msgr2 protocol introduction.
If it's a fresh install, let's go with v2 only.
If we upgrade to nautilus, we should go with v2+v1 syntax to ensure
nothing breaks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Because 5c98e361df could be seen as a non
backward compatible change this commit reverts it and bring back package
dependencies installation support.
Let's just modify the default value instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
These packages aren't needed anymore.
They were needed for ceph-init-detect buti as of ceph-init-detect doesn't exist
anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1683885
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As discussed in ceph/ceph#26599, beast is now the default frontend
for rados gateway with nautilus release.
Add rgw_thread_pool_size variable with 512 as default value and keep
backward compatibility with num_threads option when using civetweb.
Update radosgw_civetweb_num_threads to reflect rgw_thread_pool_size
change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The Ubuntu Cloud Archive-related (UCA) defaults in
roles/ceph-defaults/defaults/main.yml were commented out, which means
if you set `ceph_repository` to "uca", you get undefined variable
errors, e.g.
```
The task includes an option with an undefined variable. The error was: 'ceph_stable_repo_uca' is undefined
The error appears to have been in '/nfs/users/nfs_m/mv3/software/ceph-ansible/roles/ceph-common/tasks/installs/debian_uca_repository.yml': line 6, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- name: add ubuntu cloud archive repository
^ here
```
Unfortunately, uncommenting these results in some other breakage,
because further roles were written that use the fact of
`ceph_stable_release_uca` being defined as a proxy for "we're using
UCA", so try and install packages from the bionic-updates/queens
release, for example, which doesn't work. So there are a few `apt` tasks
that need modifying to not use `ceph_stable_release_uca` unless
`ceph_origin` is `repository` and `ceph_repository` is `uca`.
Closes: #3475
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
Also fixed rhcs_edits.txt for variable ceph_docker_registry.
Moved namespace to ceph_docker_image variable.
Signed-off-by: Phuong Nguyen <pnguyen@redhat.com>
I suspect `./generate_group_vars_sample.sh` wasn't used in
b8d580b3f4 because it introduced a typo in
`group_vars/all.yml.sample` and `group_vars/clients.yml.sample`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the previous approach was wrong.
checking if `item.key` is in `osd_auto_discovery_exclude` (`['dm-',
'loop']`) is incorrect because it will obviously not match. Therefore,
the condition will return `True` whatever the device we are checking.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a new `osd_auto_discovery_exclude` to give the possibility of
excluding some devices in auto_discovery scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
nfs-ganesha v2.5 and 2.6 have hit EOL. Install nfs-ganesha v2.7
stable that is currently being maintained.
Signed-off-by: Ramana Raja <rraja@redhat.com>
change default value of `radosgw_address` to keep consistency with
`monitor_address`.
Moreover, `ceph-validate` checks if the value is '0.0.0.0' to determine
if it has to run `check_eth_rgw.yml`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600227
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`osd_pool_default_pg_num` parameter is set in `ceph-mon`.
When using ceph-ansible with `--limit` on a specifc group of nodes, it
will fail when trying to access this variables since it wouldn't be
defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1518696
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
* The default value of osd_memory_target used by ceph is 4294967296 bytes,
so use the same as ceph-ansible default.
* Convert ansible_memtotal_mb to bytes to calculate osd_memory_target
Signed-off-by: Neha Ojha <nojha@redhat.com>
ee2d52d33d missed this sync between
ceph-defaults/defaults/main.yml and group_vars/all.yml.sampl
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Currently a throw-away container is built to run ceph client
commands to setup users, pools & auth keys. This utilises
the same base ceph container which has all the ceph services
inside it.
This PR allows the use of a separate container if the deployer
wishes - but defaults to use the same full ceph container.
This can be used for different architectures or distributions,
which may support the the Ceph client, but not Ceph server,
and allows the deployer to build and specify a separate client
container if need be.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
Liberty is no longer available in the UCA. The last available release there
is currently Queens.
Signed-off-by: Christian Berendt <berendt@betacloud-solutions.de>
Check firewall isn't working as expected and might break deployments.
This part of the code will be reworked soon.
Let's focus on configure_firewall code for now.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1541840
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Allow user to choose between timesyncd, chronyd and ntpd
Installation will default to timesyncd since it is distributed as
part of the systemd installation for most distros.
Added note indicating NTP daemon type is not used for containerized
deployments.
Fixes issue #3086 on Github
Signed-off-by: Benjamin Cherian <benjamin_cherian@amat.com>
As per #1013 it appears that BS will soon use THP to lower TLB misses,
also disabling THP hasn't demonstrated any gains so far.
Closes: https://github.com/ceph/ceph-ansible/issues/1013
Signed-off-by: Sébastien Han <seb@redhat.com>
BlueStore's cache is sized conservatively by default, so that it does
not overwhelm under-provisioned servers. The default is 1G for HDD, and
3G for SSD.
To replace the page cache, as much memory as possible should be given to
BlueStore. This is required for good performance. Since ceph-ansible
knows how much memory a host has, it can set
`bluestore cache size = max(total host memory / num OSDs on this host * safety
factor, 1G)`
Due to fragmentation and other memory use not included in bluestore's
cache, a safety factor of 0.5 for dedicated nodes and 0.2 for
hyperconverged nodes is recommended.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1595003
Signed-off-by: Neha Ojha <nojha@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
fqdn configuration possibility caused a lot of trouble, it's adding a
lot of complexity because of multiple cases and the relation between
ceph-ansible and ceph-container. Moreover, there is no benefit for such
a feature.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1613155
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since the container now simply reads the ceph.conf, we remove all the
unnecessary options.
Also this PR is the foundation to support multiple backend, such as the
new 'beast' from Ceph Mimic.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1582411
Signed-off-by: Sébastien Han <seb@redhat.com>
Since `V2.6-stable` is available and has packages for `mimic`, let's
update this default value accordingly so nfs nodes can be deployed with
mimic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of Kraken, the journal code does not use the hdparm command anymore
so we can remove it from our package dependency list.
Fixes: https://github.com/ceph/ceph-ansible/issues/1402
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit f6910efa24389c264062963b2054c7cd29ffebb3)
We now add a default 'rbd' application type to each pool we create. This
will remove the warning: " application not enabled on N pool(s) "
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1590275
Signed-off-by: Sébastien Han <seb@redhat.com>
keyring files in /etc/ceph. Default value is the same as it was (0600),
but this variable allows user to override it (f.e. set it to 0640).
Signed-off-by: George Shuklin <george.shuklin@gmail.com>
Dimitri Savineau
Guillaume Abrioux
Dmitriy Rabotyagov
Philip Brown
Boris Ranto
Johannes Kastl
liuxu
Anthony Rusdi
Giulio Fidente
fpantano
Rishabh Dave
guihecheng
Radu Toader
Matthew Vernon
Ali Maredia
Phuong Nguyen
Ramana Raja
jtudelag
Sébastien Han
Neha Ojha
Andy McCrae
Christian Berendt
Andrew Schoen
Benjamin Cherian
George Shuklin