Instead of doing two parted calls we can check first if the device exist
and then test the partition table.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 14d458b3b4)
2888c08 introduced a regression as the check_devices tasks file was
only included based on the devices variable.
But that file also validate some devices from the lvm_volumes variable.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1906022
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ac0342b72e)
When calling the `ceph_key` module with `state: info`, if the ceph
command called fails, the actual error is hidden by the module which
makes it pretty difficult to troubleshoot.
The current code always states that if rc is not equal to 0 the keyring
doesn't exist.
`state: info` should always return the actual rc, stdout and stderr.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1964889
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d58500ade0)
All ceph daemons need to have the TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES
environment variable set to 128MB by default in container setup.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970913
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9758e3c513)
It was requested for us to update our alerting definitions to include a
slow OSD Ops health check.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1951664
Signed-off-by: Boris Ranto <branto@redhat.com>
(cherry picked from commit 2491d4e004)
There's no need to copy this keyring when using nfs with mds
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8dbee99882)
When running the switch-to-containers playbook with multisite enabled,
the fact "rgw_instances" is only set for the node being processed
(serial: 1), the consequence of that is that the set_fact of
'rgw_instances_all' can't iterate over all rgw node in order to look up
each 'rgw_instances_host'.
Adding a condition checking whether hostvars[item]["rgw_instances_host"]
is defined fixes this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967926
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8279d14d32)
When monitors and rgw are collocated with multisite enabled, the
rolling_update playbook fails because during the workflow, we run some
radosgw-admin commands very early on the first mon even though this is
the monitor being upgraded, it means the container doesn't exist since
it was stopped.
This block is relevant only for scaling out rgw daemons or initial
deployment. In rolling_update workflow, it is not needed so let's skip
it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970232
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f7166cccbf)
Due to a recent commit that has introduced a regression in ceph, this
test is failing.
Temporarily disabling it to unblock the CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2e19d1705e)
When deploying dashboard in a cluster with rgw multisite deployed.
Due to the last rgw multisite refactor, we now expect the variable
`rgw_zonemaster` to be defined in the dict `rgw_instances`.
The idea here is to create that user on the cluster as soon as we have 1
`rgw_zonemaster` set to `true` in `rgw_instances`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1964995
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ceph-crash deployments is broken when ceph-ansible playbook is called
with --limit in containerized contexts since we don't set
`container_exec_cmd` on the first monitor.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1964835
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 10ed26f14d)
When osd nodes are collocated in the clients group (HCI context for
instance), the current logic will exclude osd nodes since they are
present in the client group.
The best fix would be to exclude clients node only when they are not
member of another group but for now, as a workaround, we can enforce
the addition of osd nodes to fix this specific case.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1947695
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 664dae0564)
Enabling lvmetad in containerized deployments on el7 based OS might
cause issues.
This commit make it possible to disable this service if needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1955040
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We can end up with an arm only repo unless we are specific about the
architecture we require. Brings the deb code in line with the rpm
equivalent.
Signed-off-by: Brad Hubbard <bhubbard@redhat.com>
(cherry picked from commit 267cce9e83)
This commit checks the length of `virtual_ips` doesn't exceed the length
of `groups[rgwloadbalancer_group_name]`.
It also ensure this variable is defined when
`groups[rgwloadbalancer_group_name]` contains at least one node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3b63e0649c)
While 2ca33641 fixed a bug in the way the `keepalived.conf.j2` template matched
hostnames to set the VRRP `MASTER`/`BACKUP` states, it also introduced a
regression in the case where `virtual_ips` is a list of more than one IP
address.
The previous behavior would result in each host in the `rgwloadbalancers` group
to be `MASTER` for one of the `virtual_ips`, but the new behavior caused the
first host to be `MASTER` for all the IP address in `virtual_ips`.
This commit restores the original behavior.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 2bede4762e)
TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES is for both bluestore and filestore
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit 41295f0ef6)
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit e98d9b70bd)
When dashboard_frontend_vip is provided, all the services should be
configured using the related VIP. A new VIP variable is added for
both prometheus and alertmanager: we're already able to properly
config the grafana vip using dashboard_frontend_vip variable.
This change adds the same variable for both prometheus and
alertmanager.
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit 441651638d)
We shouldn't prevent from setting target_size_ratio when the autoscaler
is set to 'warn'.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1906305
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The `set_fact rgw_ports` task was failing due to a templating error, because
`hostvars[item].rgw_instances` is a list, but it was treated as if it was a
dictionary.
Another issue was the fact that the `unique` filter only applied to the list
being appended to `rgw_ports` instead of the entire list, which means it was
possible to have duplicate items.
Lastly, `rgw_ports` would have been a list of integers, but the `seport` module
expects a list of strings.
This commit fixes all of the issues above, allowing the `ceph-rgw-loadbalancer`
role to work on systems with SELinux enabled.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit c078513475)
This adds a `ExecStartPre=-/usr/bin/mkdir -p /var/log/ceph` in all
systemd service templates for all ceph daemon.
This is specific to RHCS after a Leapp upgrade is done. Indeed, the
`/var/log/ceph` seems to be removed after the upgrade.
In order to work around this issue let's ensure the directory is present
before trying to start the containers with podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1949489
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit bab403b603)
`configure_mirroring.yml` is called right after the daemon is started.
Sometimes, it can happen the first task in `configure_mirroring.yml` is
run while the daemon isn't yet ready, adding a retries/until on that
task should help to avoid causing the playbook to fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1944996
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b1e7e1ad0f)
when running docker-to-podman playbook, there's no need to call
`ceph-config` and `ceph-rgw` from the role `ceph-handler`.
It can even have side effects when coming from a baremetal cluster that
was previously migrated using the switch-to-containers playbook. Indeed
it might complain about missing .target systemd unit since they are
removed during that migration.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1944999
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 70f19be367)
This moves some task from the `ceph-nfs` role in `ceph-common` since
some of them are needed in `ceph-rgwloadbalancer` role.
This avoids duplicated tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d0442d81b9)
This adds all rgw ports to the http_port_t selinux type so it
allows haproxy to connect to those ports in order to avoid AVC.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1923890
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6bbb90198b)
haproxy gets an AVC when configured to connect to port 8081
This commit adds a snippet regarding haproxy in a selinux environment
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1923890
Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com>
(cherry picked from commit 9e7f22a071)
Currently NFS Ganesha (ceph-nfs) consumes /etc/idmapd.conf, which
controls mapping of user/owner identities under NFSv4+. With
containerized service deployment, this file is an immutable part of the
container image and cannot be modified.
Here we provide group variables, and a taskk and templates for the
ceph-nfs role, to set the path of the idmap configuration file and
to make the most common adjustment to the contents of that file --
namely to set the 'Domain'. We default the path to /etc/ganesha/idmap.conf
so that we will not conflict with /etc/idmapd.conf on the controller nodes
where ganesha runs. NFSv4 clients, as used for example by the Cinder NFS
driver, consume /etc/idmapd.conf and may require different settings than
what is wanted for NFS Ganesha. Additionally, because we already bind
/etc/ganesha from the host into the ceph-nfs container, the file NFS
Ganesha consumes will no longer be an immutable part of the container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1925646
Signed-off-by: Tom Barron tpb@dyncloud.net
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2db2208e40)
This commit adds the parameter `--storage.tsdb.retention.time` to the
prometheus systemd unit template.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1928000
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b60c61ce45)
This add a quick documentation in ceph-defaults about `igw_network`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c5728bdc63)
This adds the possibility to deploy the dashboard with igw nodes using
a dedicated subnet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1926170
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c33de174f1)
rbd-mirroring is not configured as adding peer is getting skipped.
Peer addition should not get skipped if its not added already
Closes - https://bugzilla.redhat.com/show_bug.cgi?id=1942444
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
(cherry picked from commit 006998e804)
This converts some missed calls to `ansible_*` that were missed in
initial PR #6312
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0163ecc924)
As a continuation of a7f2fa73e6, this
change switches fact injection to off by default in the provided
ansible.cfg.
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit db031a4993)
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit a7f2fa73e6)
due to recent changes in shaman, we must fetch the right repo by
filtering on the desired architecture.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5801171b37)
When collocating OSDs with other daemon, `num_osds` is incorrectly calculated
because `ceph-config` is called multiple times.
Indeed, the following code:
```
num_osds: "{{ lvm_list.stdout | default('{}') | from_json | length | int + num_osds | default(0) | int }}"
```
makes `num_osds` be incremented each time `ceph-config` is called.
We have to reset it in order to get the correct number of expected OSDs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 31a0f2653d)
The "update apt cache" in the ceph-handler role was never called and the
handler trigger after adding the uca repository doesn't exist at all.
Instead of using a handler for that we can just set the update_cache
parameter to true like the other apt_repository tasks.
Resolve merge conflict from cherry-picking this commit.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 09d6706697)
The monitoring node running grafana needs the rhcs tools repostory
enabled in non containerized deployment to be able to install the
ceph-grafana-dashboards rpm package.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1918650
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit e4dd0067c6)
Just likve `devices`, this commit adds the support for linux device aliases for
`dedicated_devices` and `bluestore_wal_devices`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1919084
Signed-off-by: Tyler Bishop <tbishop@liquidweb.com>
(cherry picked from commit ee4b8804ae)
Due to missing condition on `cephx` variable, cephx disabled deployments
are broken.
This commit fixes this.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1910151
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4af0845702)
Due to recent changes in shaman, there's a chance it returns the wrong
repository from architecture point of view.
We can query shaman and ask for the correct architecture to get around
this.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 39649f0ce8)
http://docs.ceph.com/docs/nautilus/radosgw/frontends/ 404s so replace
it with a working "latest" docs link, and correct the spelling of
"additional" while I'm at it.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit 847611048e)
the `ceph_cmd` fact is missing the `--net=host` parameter.
Some tasks consuming this fact can fail like following:
```
Error: error configuring network namespace for container b8ec913db1fb694ae683faf202680de7a59c714a004e533aba87e8503d29261f: Missing CNI default network
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1931365
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f143b1a647)
if `rgw_zonegroupmaster` is not defined at the rgw instance level in
`rgw_instances` it will fallback to a wrong variable (`rgw_zonemaster`).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1925247
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 931b87e830)
Dimitri Savineau
Guillaume Abrioux
Boris Ranto
VasishtaShastry
Brad Hubbard
Benoît Knecht
Seena Fallah
Francesco Pantano
kalebskeithley
Alex Schultz
Tyler Bishop
Matthew Vernon