The ansible_lsb fact is based on the lsb package (lsb-base,
lsb-release or redhat-lsb-core).
If the package isn't installed on the remote host then the fact isn't
populated.
--------
"ansible_lsb": {},
--------
Switching to the ansible_distribution_release fact instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit dc187ea6fa)
As per bz1718981, this commit adds higher values to check
the quorum status. This is helpful for several OSP deployments
that fail during the scale up.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1718981
Signed-off-by: fpantano <fpantano@redhat.com>
(cherry picked from commit ba73dc7b21)
The ceph-volume lvm list command takes ages to complete when having
a lot of LV devices on containerized deployment.
For instance, with 25 OSDs on a node it takes 3 mins 44s to list the
OSD.
Adding the max open files limit to the container engine cli when
executing the ceph-volume command seems to improve a lot thee
execution time ~30s.
This was impacting the OSDs creation with ceph-volume (both filestore
and bluestore) when using multiple LV devices.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1702285
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit b987534881)
We already set the become flag to true at a play level in the site*
playbooks so we don't need to set it at a task level.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7c3640177b)
`parted_results` isn't used anymore in the playbook.
By the way, `parted` seems to cause issue because it changes the
ownership on devices:
```
root@osd0 ~]# ls -l /dev/sdc*
brw-rw----. 1 root disk 8, 32 Jun 11 08:53 /dev/sdc
brw-rw----. 1 ceph ceph 8, 33 Jun 11 08:53 /dev/sdc1
brw-rw----. 1 ceph ceph 8, 34 Jun 11 08:53 /dev/sdc2
[root@osd0 ~]# parted -s /dev/sdc print
Model: ATA QEMU HARDDISK (scsi)
Disk /dev/sdc: 53.7GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 1075MB 1074MB ceph block.db
2 1075MB 2149MB 1074MB ceph block.db
[root@osd0 ~]# #We can see ownerships have changed from ceph:ceph to root:disk:
[root@osd0 ~]# ls -l /dev/sdc*
brw-rw----. 1 root disk 8, 32 Jun 11 08:57 /dev/sdc
brw-rw----. 1 root disk 8, 33 Jun 11 08:57 /dev/sdc1
brw-rw----. 1 root disk 8, 34 Jun 11 08:57 /dev/sdc2
[root@osd0 ~]#
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit eece362b38)
The definitions of cephfs pools should match openstack pools.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Co-Authored-by: Simone Caronni <simone.caronni@teralytics.net>
(cherry picked from commit 67071c3169)
The ceph-agent role was used only for RHCS 2 (jewel) so it's not
usefull anymore.
The current code will fail on CentOS distribution because the rhscon
package is only avaible on Red Hat with the RHCS 2 repository and
this ceph release is supported on stable-3.0 branch.
Resolves: #4020
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7503098ca0)
Because we're using vagrant, a ssh config file will be created for
each nodes with options like user, host, port, identity, etc...
But via tox we're override ANSIBLE_SSH_ARGS to use this file. This
remove the default value set in ansible.cfg.
Also adding PreferredAuthentications=publickey because CentOS/RHEL
servers are configured with GSSAPIAuthenticationis enabled for ssh
server forcing the client to make a PTR DNS query.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 34f9d51178)
Since timesyncd is not available on RHEL-based OSs, change the default
to chronyd for RHEL-based OSs. Also, chronyd is chrony on Ubuntu, so
set the Ansible fact accordingly.
Fixes: https://github.com/ceph/ceph-ansible/issues/3628
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 9d88d3199f)
if we don't assign the rbd application tag on this pool,
the cluster will get `HEALTH_WARN` state like following:
```
HEALTH_WARN application not enabled on 1 pool(s)
POOL_APP_NOT_ENABLED application not enabled on 1 pool(s)
application not enabled on pool 'rbd'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4cf17a6fdd)
Ubuntu-based CI jobs often fail with error code 404 while installing
NTP daemons. Updating cache beforehand should fix the issue.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit d1c266e6c7)
069076b introduced a bug in the systemd unit script template. This
commit fixes the options used by the node-exporter container.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d0840217f3)
Add a variable to support the allow_embedding support.
See ceph/ceph-ansible/issues/4084 for details.
Fixes: #4084
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 27856cc499)
This setting must be set to something resolvable.
See: ceph/ceph-ansible/issues/4085 for details
Fixes: #4085
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2c9cd9d9e7)
We're using fuser command to see if a process is using a ceph unix
socket file. But the fuser command runs through every PID present in
/proc/<PID> to see if one of them is using the file.
On a system running thousands processes, the fuser command can take
a long time to finish.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1717011
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit da9891da1e)
Instead of using the modprobe command from the path in the systemd
unit script, we can use the modprobe ansible module.
That way we don't have to manage the binary path based on the linux
distribution.
Resolves: #4072
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit dbf81b6b5b)
Few fixes on systemd unit templates for node_exporter and
alertmanager container parameters.
Added the ability to use a dedicated instance to deploy the
dashboard components (prometheus and grafana).
This commit also introduces the grafana_group_name variable
to refer grafana group and keep consistency with the other
groups.
During the integration with TripleO some grafana/prometheus
template variables resulted undefined. This commit adds the
ability to check if the group exist and create, accordingly,
different job groups in prometheus template.
Signed-off-by: fmount <fpantano@redhat.com>
(cherry picked from commit 069076bbfd)
Currently we're only able to use podman on ubuntu if podman's
installation is done manually before the ceph-ansible execution
because the deb package is present in an external repository.
We already manage the docker-ce installation via an external
repository so we should be able to allow the podman installation
with the same mechanism too.
https://github.com/containers/libpod/blob/master/install.md#ubuntuResolves: #3947
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 518ab794fb)
When using podman, the systemd unit scripts don't have a dependency
on the network. So we're not sure that the network is up and running
when the containers are starting.
With docker this behaviour is already handled because the systemd
unit scripts depend on docker service which is started after the
network.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f49090df7e)
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
(cherry picked from commit ab54fe20ec)
This add support for rgw loadbalancer based on HAProxy and Keepalived.
We define a single role ceph-rgw-loadbalancer and include HAProxy and
Keepalived configurations all in this.
A single haproxy backend is used to balance all RGW instances and
a single frontend is exported via a single port, default 80.
Keepalived is used to maintain the high availability of all haproxy
instances. You are free to use any number of VIPs. A single VIP is
shared across all keepalived instances and there will be one
master for one VIP, selected sequentially, and others serve as
backups.
This assumes that each keepalived instance is on the same node as
one haproxy instance and we use a simple check script to detect
the state of each haproxy instance and trigger the VIP failover
upon its failure.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
(cherry picked from commit 35d40c65f8)
if `nfs_obj_gw` is True when deploying an internal ganesha with an
external ceph cluster, `ceph_nfs_rgw_access_key` and
`ceph_nfs_rgw_secret_key` must be provided so the
ganesha configuration file can be generated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 003aeea45a)
This commits allows to deploy an internal ganesha with an external ceph
cluster.
This requires to define `external_cluster_mon_ips` with a comma
separated list of external monitors.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710358
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6a6785b719)
Otherwise content in /run/udev is mislabeled and prevent some services
like NetworkManager from starting.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 80875adba7)
the rhel8 image used is an outdated beta version, it is not worth it to
maintain this image upstream, since it's possible to test podman with a
newer version of centos/atomic-host image.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a78fb209b1)
789cef7 introduces a regression in the ganesha configuration file
generation. The new config_template module version broke it.
But the ganesha.conf file isn't an ini file and doesn't really
need to use the config_template module. Instead we can use the
classic template module.
Resolves: #4045
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 616c484698)
The fsid generation is done via a python command. When the ansible
controller node only have python3 available (like RHEL 8) then the
python command isn't necessarily present causing the fsid generation
to fail.
We already do some resource creation (like ceph keyring secret) with
the python command too but from the mon node so we should do the same
for fsid.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1714631
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit daf92a9e1f)
This commit splits the current `ceph-container-common` role.
This introduces a new role `ceph-container-engine` which handles the
tasks specific to the installation of containers tools (docker/podman).
This is needed for the ceph-dashboard implementation for 2 main reasons:
1/ Since the ceph-dashboard stack is only containerized, we must install
everything needed to run containers even in non containerized
deployments. Splitting this role allows us to not have to call the full
`ceph-container-common` role which would run a bunch of unneeded tasks
that would have been skipped anyway.
2/ The current implementation would have required to run
`ceph-container-common` on all ceph-clients nodes which would have been
conflicting with 9d3517c670 (we don't want
to run ceph-container-common on all client nodes, see mentioned commit
for more details)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 55420d6253)
The ceph mgr dashboard requires routes python library to be installed
on the system.
Resolves: #3995
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f37edfa113)
gpg package isn't available for all Debian/Ubuntu distribution but
gnupg is.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 622d9feae9)
As of nautilus, if you set `ms bind ipv6 = True` you must explicitly set
`ms bind ipv4 = False` too, otherwise OSDs will still try to pick up an
IPv4 address.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710319
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6ca7372a2d)
Because ansible_distribution_version doesn't return minor version on
CentOS with ansible 2.8 we can apply the selinux anyway but only for
CentOS/RHEL 7.
Starting RHEL 8, there's a dedicated package for selinux called
nfs-ganesha-selinux [1].
Also replace the command module + semanage by the selinux_permissive
module.
[1] https://github.com/nfs-ganesha/nfs-ganesha/commit/a7911f
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 0ee833432e)
Ceph iSCSI gateway requires Red Hat Enterprise Linux or CentOS 7.5
or later.
Because we can not check the ansible_distribution_version fact for
CentOS with ansible 2.8 (returns only the major version) we can
fallback by checking the kernel option.
- CONFIG_TARGET_CORE=m
- CONFIG_TCM_USER2=m
- CONFIG_ISCSI_TARGET=m
http://docs.ceph.com/docs/master/rbd/iscsi-target-cli-manual-install/
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 0c7fd79865)
When using a minimal Debian/Ubuntu distribution there's no
ca-certificates and gpg packages installed so the apt modules will
fail:
Failed to find required executable gpg in paths:
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
apt.cache.FetchFailedException:
W:https://download.ceph.com/debian-luminous/dists/bionic/InRelease:
No system certificates available. Try installing ca-certificates.
Resolves: #3994
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 494746b7a6)
There is no need to have default values for these variables in each roles
since there is no corresponding host groups
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9f0d4d6847)
This commit renames the `docker_exec_cmd` variable to
`container_exec_cmd` so it's more generic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e74d80e72f)
This commit aligns the way the different containers are managed with how
it's currently done with the other ceph daemon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cc285c417a)
make `dashboard_rgw_api_no_ssl_verify` a bool variable since it seems to
be used as it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cd5f3fca64)
since stable-4.0 isn't to deploy ceph releases prior to nautilus,
there's no need to add this complexity here.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4405f50c85)
use site.yml to deploy ceph-container-common in order to install docker
even in non-containerized deployments since there's no RPM available to
deploy the differents applications needed for ceph-dashboard.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cdff0da7d4)
there is no need to add more complexity for this, let's use
`containerized_deployment` in order to detect if we are running a
containerized deployment.
The idea is to use `container_exec_cmd` the same way we do in the rest of
the playbook to run the different ceph commands needed to deploy the
ceph-dashboard role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 742bb6214c)
This is needed for the ceph-dashboard implementation since it requires
to run containerized application which aren't packaged as RPMs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6d9dbb1d39)
add .j2 to all templates file related to dashboard roles.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3578d576a4)
This adds support for podman in dashboard-related roles. It also drops
the creation of custom network for the dashboard-related roles as this
functionality works in a different way with podman.
Signed-off-by: Boris Ranto <branto@redhat.com>
(cherry picked from commit b4d1c3693b)
We cannot use the old fashioned config-key way, here. It was not
supported when the option was introduced (post 14.2.0). Since the option
is not always supported we can simply ignore the potential failure on
ceph clusters that do not support it.
Signed-off-by: Boris Ranto <branto@redhat.com>
(cherry picked from commit e737a1f83e)
This commit adds a list of alerting rules for ceph-dashboard from the
old cephmetrics project. It also installs the configuration file so that
the rules get recognized by the prometheus server.
Signed-off-by: Boris Ranto <branto@redhat.com>
(cherry picked from commit 8f77caa932)
This commit will merge dashboard-ansible installation scripts with
ceph-ansible. This includes several new roles to setup ceph-dashboard
and the underlying technologies like prometheus and grafana server.
Signed-off-by: Boris Ranto & Zack Cerza <team-gmeno@redhat.com>
Co-authored-by: Zack Cerza <zcerza@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2f141a6e80)
Currently podman installation is very tied to RHEL 8 even if we're
able to install it on Debian/Ubuntu distribution.
This patch changes the way we are starting or not the (fat) container
daemon. Before the condition was based on the distribution release
and now on the container_service_name variable.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d2ad191eca)
If we do this in one line we get the error described in #3968fixes#3968
Signed-off-by: Bruceforce <markus.greis@gmx.de>
(cherry picked from commit c3b0ee30a1)
RHCS 4 will be based on Nautilus and only usable on RHEL 8.
Updated the default ceph_rhcs_version to 4 and update the rhcs
repositories to rhcs 4 with RHEL 8.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ba49225eab)
The old condition would resolve to
"when": "nfs_ganesha_stable - ceph_repository == 'community'"
now it is
"when": [
"nfs_ganesha_stable",
"ceph_repository == 'community'"
]
Please backport to stable-4.0
Signed-off-by: Bruceforce <markus.greis@gmx.de>
(cherry picked from commit 29f2c953b4)
Set the application to rgw for pools created from rgw_create_pools. On Ceph Nautilus the heath is set to HEALTH_WARN with the message "application not enabled on X pool(s)" if an application isn't specified for a pool.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
(cherry picked from commit 381c58ca3e)
Use blocks for similar tasks in main.yml. And move when keywords before
block keywords.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 121b5e4184)
running an external ceph cluster deployment with (obviously) no
monitors defined in inventory breaks with an undefined error because
`_monitor_addresses` never get defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1707460
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 936c6fca78)
Except for some corner case, it's not correct to access some other
node's copy of variable docker_exec_cmd. Therefore replace
"hostvars[groups[mon_group_name][0]]['docker_exec_cmd']" by
"docker_exec_cmd".
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 89748d579a)
Add code in ceph-mgr for creating a keyring for manager in so that
managers can be deployed on a separate node too.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 56bfec7c58)
Adds "check_mode: no" to commands which register cluster state in a
variable and don't modify anything. These commands have to run in order
to support running the playbook in check mode.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 3c8987c7a5)
Keywords requiring only one item shouldn't express it by creating a
list with single item.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 739a662c80)
Conflicts:
roles/ceph-mon/tasks/ceph_keys.yml
roles/ceph-validate/tasks/check_devices.yml
This will be removed in ansible 2.8 and breaks the playbook execution
with this release.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ae266c6f2b)
In containerized deployment the default mds cpu quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1695850
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 1999cf3d19)
In containerized deployment the default osd cpu quota is too low
for production environment using NVMe devices.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1695880
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c17106874c)
Only rbd-target-api and rbd-target-gw were started/enabled for non
containerized deployment.
The issue doesn't happen with containerized setup.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4ae5ce399b)
Otherwise the reader is forced to search for "when" when blocks are too
long.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit e0beaf123a)
Conflicts:
roles/ceph-config/tasks/main.yml
roles/ceph-container-common/tasks/pre_requisites/prerequisites.yml
roles/ceph-validate/tasks/check_devices.yml
1/ The OSD already supports cpuset to be used for containerized deployments
through the use of the ceph_osd_docker_cpuset_cpus variable. This adds similar
support to the RGW service for containerized deployments by setting a new
variable named ceph_rgw_docker_cpuset_cpus. Like the OSD, there are times where
using distinct cores has advantages over using the CFS in kernel scheduler.
ceph_rgw_docker_cpuset_cpus accepts a comma delimited set of CPU ids
2/ Add support for specifying --cpuset-mem variable to restrict the cgroup's memory
allocations to a particular numa node, which should typically correspond with
the cpu ids of that numa node that were provided with --cpuset-cpus. To ensure
the correct cpu ids are used one can run `numactl --hardware` to list the nodes
and which cpu ids correspond to each.
Signed-off-by: Kyle Bader <kbader@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0bee90b201)
Until now it was not possible to install a specific container package
because it was somehow hardcoded.
This patch allows to override the container package name (docker.io
vs docker-ce) and refacts the package installation. This could be
achieve via the container_package_name variable.
Instead of using one task per distribution we can set the package and
service name in vars. This allows to have a unified package task.
Also refactorize the debian_prerequisites tasks because the content
was outdated.
https://docs.docker.com/install/linux/docker-ce/debian/https://docs.docker.com/install/linux/docker-ce/ubuntu/Resolves: #3609
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8105a1cefb)
We do this so that the ceph-config role can most accurately
report the number of osds for the generation of the ceph.conf
file.
We don't want to use ceph-volume to determine the number of
osds because in an upgrade to nautilus ceph-volume won't be able to
accurately count osds created by ceph-disk.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 67453853ff)
When performing a rolling update do not try to create
any new osds with `ceph-volume lvm batch`. This is troublesome
because when upgrading to nautilus the devices list might contain
devices that are currently being used by ceph-disk and have GPT
headers on them, which will cause ceph-volume to fail when
trying to use such a device. Any devices originally created
by ceph-disk will need to be removed from the devices list
before any new osds can be created.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 5e3dfe5021)
Since Nautilus there's mgr extra modules not present in ceph-mgr
package but in dedicated packages.
Resolves: #3860
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 86315272c7)
this commit refact the msgr2 protocol introduction.
If it's a fresh install, let's go with v2 only.
If we upgrade to nautilus, we should go with v2+v1 syntax to ensure
nothing breaks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a4bc7bda51)
The library directory that contain the custom ceph modules in present
in the ceph-ansible root directory.
All igw_* mocules are already present there so we don't need the one
present in roles/ceph-iscsi-gw/library.
Also remove the associated spec file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c8814d1331)
this task has nothing to do in stable-4.0 and after.
Let's remove it since stable-4.0 and after aren't intended to deploy
luminous.
Closes: #3873
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 58f3851573)
Currently we only support ansible 2.7
We plan to use 2.8 when it will be release so we have to support both
2.7 and 2.8.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1700548
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit e471bce76b)
Because 5c98e361df could be seen as a non
backward compatible change this commit reverts it and bring back package
dependencies installation support.
Let's just modify the default value instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit edfa4310d3)
These packages aren't needed anymore.
They were needed for ceph-init-detect buti as of ceph-init-detect doesn't exist
anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1683885
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5c98e361df)
When adding a new monitor, we must reuse the existing initial monitor
keyring. Otherwise, the new monitor will issue its 'mkfs' with a new
monitor keyring and it will result with a mismatch between them. The
new monitor will be unable to join the quorum in the end.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit edf1ee2073)
these files aren't needed anymore since we only use lvm scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4f68462009)
This variable was related to ceph-disk scenarios.
Since we are entirely dropping ceph-disk support as of stable-4.0, let's
remove this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f0416c8892)
As of stable-4.0, the only valid scenario is `lvm`.
Thus, this makes this variable useless.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4d35e9eeed)
ceph_disk_cli_options_facts.yml is not used anymore, let's remove it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4d5637fd8a)
We only validate the devices that are passed if there is a list of
devices to validate.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 2888c0825f)
osd_scenario has become obsolete and defaults to lvm. With lvm there is
no such things has collocated and non-collocated.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 52df15895b)
ceph-disk is not supported anymore, so all the newly created OSDs will
be configured using ceph-volume.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 9ea1e49407)
We don't support the preparation of OSD with ceph-disk. ceph-volume is
only supported. However, the start operation of OSD is still supported.
So let's say you change a config option, the handlers will be able to
restart all the OSDs via their respective systemd unit files.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e2a5aa062e)
We don't need to use the cephfs variable for the application pool
name because it's always cephfs.
If the cephfs variable is set to something else than the default
value it will break the appplication pool task.
Resolves: #3790
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d2efb7f02b)
ceph-volume didn't work when the devices where passed by path.
Since it now support it, let's allow this feature in ceph-ansible
Closes: #3812
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7e0adca7a4)
As discussed in ceph/ceph#26599, beast is now the default frontend
for rados gateway with nautilus release.
Add rgw_thread_pool_size variable with 512 as default value and keep
backward compatibility with num_threads option when using civetweb.
Update radosgw_civetweb_num_threads to reflect rgw_thread_pool_size
change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d17b1b48b6)
Let's use a condition to run this task only on the first mon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 631e5d3144)
The Ubuntu Cloud Archive-related (UCA) defaults in
roles/ceph-defaults/defaults/main.yml were commented out, which means
if you set `ceph_repository` to "uca", you get undefined variable
errors, e.g.
```
The task includes an option with an undefined variable. The error was: 'ceph_stable_repo_uca' is undefined
The error appears to have been in '/nfs/users/nfs_m/mv3/software/ceph-ansible/roles/ceph-common/tasks/installs/debian_uca_repository.yml': line 6, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- name: add ubuntu cloud archive repository
^ here
```
Unfortunately, uncommenting these results in some other breakage,
because further roles were written that use the fact of
`ceph_stable_release_uca` being defined as a proxy for "we're using
UCA", so try and install packages from the bionic-updates/queens
release, for example, which doesn't work. So there are a few `apt` tasks
that need modifying to not use `ceph_stable_release_uca` unless
`ceph_origin` is `repository` and `ceph_repository` is `uca`.
Closes: #3475
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit 9dd913cf8a)
docker daemon is automatically started during package installation
but the service isn't enabled on boot.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 37816570c6)
Add a tox scenario that adds an new MDS node as a part of already
deployed Ceph cluster and deploys MDS there.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit c0dfa9b61a)
When using monitor_address_block or radosgw_address_block variables
to configure the mon/rgw address we're getting the first ip address
from the ansible facts present in that cidr.
When there's VIP on that network the first filter could return the
wrong value.
This seems to affect only IPv6 setup because the VIP addresses are
added to the ansible facts at the beginning of the list. This is the
opposite (at the end) when using IPv4.
This causes the mon/rgw processes to bind on the VIP address.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1680155
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit fd4b0ec7eb)
The path of the RGW environment file (in the /var/lib/ceph/radosgw/
directory) depends on the Ceph clustername. It was not taken into
account in the Ansible role `ceph-rgw`.
Signed-off-by: flaf <francois.lafont.1978@gmail.com>
(cherry picked from commit 4c3e77d869)
When mgrs are implicitly collocated on monitors (no mgrs in mgrs group).
That include was skipped because of this condition :
`inventory_hostname == groups[mgr_group_name][0]`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cbfdbab177)
before managing mgr modules, we must ensure all mgr are available
otherwise we can hit failure like following:
```
stdout:Error ENOENT: all mgr daemons do not support module 'restful', pass --force to force enablement
```
It happens because all mgr are not yet available when trying to manage
with mgr modules.
Closes: #3100
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f596cc1711)
According to rdo testing https://review.rdoproject.org/r/#/c/18721
a check on the output of the ceph_health value is added to
allow the playbook to make several attempts (according to the
retry/delay variables) when waiting the cluster quorum or
when the container bootstrap is not ended.
It avoids the failure of the command execution when it doesn't
receive a valid json object to decode (because cluster is too
slow to boostrap compared to ceph-ansible task execution).
Signed-off-by: fpantano <fpantano@redhat.com>
(cherry picked from commit afbb90e4ac)
In containerized deployment the default radosgw quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1680171
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d3ae9fd05f)
Since https://github.com/ceph/ceph/commit/77912c0 ceph-volume uses
stdout encoding based on LC_CTYPE and PYTHONIOENCODING environment
variables.
Thoses variables aren't set when using ansible.
Currently this commit breaks non containerized deployment on Ubuntu.
TASK [use ceph-volume to create bluestore osds] ********************
cmd:
- ceph-volume
- --cluster
- ceph
- lvm
- create
- --bluestore
- --data
- /dev/sdb
rc: 1
stderr: |-
Traceback (most recent call last):
(...)
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in
position 132: ordinal not in range(128)
Note that the task is failing on ansible side due to the stdout
decoding but the osd creation is successful.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7e5e4229b7)
Similar to #3658
Since there's too many changes between master and stable branches let's
commit directly in each branches instead of trying to backport this
commit.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When installing python-minimal on Ubuntu bionic, this will add the
/usr/bin/python symlink to the default python interpreter.
On bionic, this isn't python2 but python3.
$ /usr/bin/python --version
Python 3.6.7
The python docker library is only installed for python2 which causes
issues when running the purge-docker-cluster playbook. This playbook
uses the ansible docker modules and requires to have python bindings
installed on the remote host.
Without the bindings we can see python error reported by the docker
module.
msg: Failed to import docker or docker-py - No module named 'docker'.
Try `pip install docker` or `pip install docker-py` (Python 2.6)
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
sometimes those tasks might fail because of a timeout.
I've been facing this several times in the CI, adding this retry might
help and won't hurt in any case.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a couple of fixes to allow containerized deployments upgrade support
to upgrade from luminous/mimic to nautilus.
- pass CEPH_CONTAINER_IMAGE and CEPH_CONTAINER_BINARY environment
variable to the ceph_key module,
- fix the docker exec command in 'waiting for the containerized monitor
to join the quorum' task according to the `delegate_to` parameter,
- override `docker_exec_cmd` in `ceph-facts` with `mon_host` when
rolling_update is `True`,
- do not run unnecessarily `create_mds_filesystems.yml` when performing an
upgrade.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This prevents the packaging from restarting services before we do need
to restart them in the rolling update sequence.
We want to handle services restart at rolling_update playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of nautilus, the initial keyrings list has changed, it means when
upgrading from Luminous or Mimic, it is expected there's a mismatch
between what is found on the cluster and the expected initial keyring
list hardcoded in ceph_key module. We shouldn't fail when upgrading to
nautilus.
str_to_bool() took from ceph-volume.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-Authored-by: Alfredo Deza <adeza@redhat.com>
rolling_update playbook already takes care of stopping/starting services
during the sequence. There's no need to trigger potential unwanted
services restart.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using osd_scenario lvm, we never check if the lvm2 package is
present on the host.
When using containerized deployment and docker on CentOS/RedHat this
package will be automatically installed as a dependency but not for
Ubuntu distribution.
OSD deployed via ceph-volume require the lvmetad.socket to be active
and running.
Resolves: #3728
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since all files in container image have moved to `/opt/ceph-container`
this check must look for new AND the old path so it's backward
compatible. Otherwise it could end up by templating an inconsistent
`ceph-osd-run.sh`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using monitor_address_block to determine the ip address of the
monitor node, we need an ip address available in that cidr to be
present in the ansible facts (ansible_all_ipv[46]_addresses).
Currently we don't check if there's an ip address available during
the ceph-validate role.
As a result, the ceph-config role fails due to an empty list during
ceph.conf template creation but the error isn't explicit.
TASK [ceph-config : generate ceph.conf configuration file] *****
fatal: [0]: FAILED! => {"msg": "No first item, sequence was empty."}
With this patch we will fail before the ceph deployment with an
explicit failure message.
Resolves: rhbz#1673687
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using community repository we need to set the priority on the
ceph repositories because we could have some conflict with EPEL
packages.
In order to set the priority on the ceph repositories, we need to
install the yum-plugin-priorities package.
http://docs.ceph.com/docs/master/install/get-packages/#rpm-packages
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the task will be delegated to mons[0] for all mgr hosts, so we can just run it on the first host and have the same effect.
Signed-off-by: wumingqiao <wumingqiao@beyondcent.com>
Currently the default crush rule value is added to the ceph config
on the mon nodes as an extra configuration applied after the template
generation via the ansible ini module.
This implies two behaviors:
1/ On each ceph-ansible run, the ceph.conf will be regenerated via
ceph-config+template and then ceph-mon+ini_file. This leads to a
non necessary daemons restart.
2/ When other ceph daemons are collocated on the monitor nodes
(like mgr or rgw), the default crush rule value will be erased by
the ceph.conf template (mon -> mgr -> rgw).
This patch adds the osd_pool_default_crush_rule config to the ceph
template and only for the monitor nodes (like crush_rules.yml).
The default crush rule id is read (if exist) from the current ceph
configuration.
The default configuration is -1 (ceph default).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1638092
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
With 3e32dce we can run OSD containers with numactl support.
When using numactl command in a containerized deployment we need to
be sure that the corresponding package is installed on the host.
The package installation is only executed when the
ceph_osd_numactl_opts variable isn't empty.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to set After=docker.service when the container_binary
variable isn't set to docker.
It doesn't break anything currently but it could be confusing when
using podman.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using subscription-manager with command module we can use
the rhsm_repository ansible module.
This module already uses repos list feature to determine if a
repository is enabled or not. That way this module is idempotent so
we don't need changed_when: false anymore.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph stable community repository only enables the basearch
packages url.
Adding the noarch url because starting with nautilus release, some
packages are added there and useful for mgr or grafana.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
After b8d580b and e9e5d5a we could have either item.min_size or
osd_pool_default_min_size using string instead of int causing the
condition to be true when it's false.
As a result, the task could try to set the pool min_size value to
0 which leads to:
Error EINVAL: pool min_size must be between 1 and 1
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
b8d580b3f4 introduced a bug when
`min_size` isn't set (default to 0).
Typical error:
```
Error EINVAL: pool min_size must be between 1 and 1
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The following lint issues have been resolved:
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-mon/tasks/ceph_keys.yml:2
[305] Use shell only when shell functionality is required
/home/travis/build/ceph/ceph-ansible/roles/ceph-osd/tasks/start_osds.yml:47
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:2
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:7
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:14
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:19
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:24
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
Tuned name of a task and error message to make it more user understandable
Fixes BZ 1648168 - ceph-validate : devices are not validated in non-collocated and lvm_batch scenario
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1648168
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
The "get osd ids" statement only registers the osd_ids_non_container variable. Running "ls /var/lib/ceph/osd/ | sed 's/.*-//'" should never produce a change on the system. Adding changed_when: false prevents irrelevant change messages from Ansible.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
Referring to BZ#1683290, as dsavineau suggests, being this
bug tripleO specific, removed the ubuntu section and removed
useless mountpoints.
Signed-off-by: fpantano <fpantano@redhat.com>
There's no need to set the client_admin_ceph_authtool_cap variable
via a set_fact task.
Instead we can set this in the role defaults.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The administrator keyring needs full capabilities on mds like mon,
osd and mgr.
Whithout this, the client.admin key won't be able to run commands
against mds (like ceph tell mds.0 session ls)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1672878
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Set directories to 755 and files to 644 to /var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }} recursively instead of setting files and directories to 755 recursively. The ceph mon process writes files to this path with permissions 644. This update stops ansible from updating the permissions in /var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }} every time ceph mon writes a file and increases idempotency.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
the previous approach was wrong.
checking if `item.key` is in `osd_auto_discovery_exclude` (`['dm-',
'loop']`) is incorrect because it will obviously not match. Therefore,
the condition will return `True` whatever the device we are checking.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a new `osd_auto_discovery_exclude` to give the possibility of
excluding some devices in auto_discovery scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There's no need to restart firewalld service when a new rule is
added due to the usage of the immediate flag.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We shouldn't reset `ceph_release` with `ceph_stable_release` when
`ceph_repository` is `rhcs`
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1645379
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
introduce two new variables to make the check that 'wait for all osd to
be up' configurable.
It's possible that for some deployments, OSDs can take longer to be seen
as UP and IN.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1676763
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The existing task checks that the number of OSDs is equal to the number of up OSDs before continuing.
The problem is that if none of the OSDs have been discovered yet, the task will exit immediately and subsequent pool creation will fail (num_osds = 0, num_up_osds = 0).
This is related to Bugzilla 1578086.
In this change, we also check that at least one OSD is present. In our testing, this results in the task correctly waiting for all OSDs to come up before continuing.
Signed-off-by: David Waiting <david_waiting@comcast.com>
This reverts commit bb2bbeb941.
Looks like when not passing `--pid=host` we are facing some issues when
deploying more than 2 OSDs in containerized environment.
At the moment, we are still troubleshooting this issue but we prefer to
revert this commit so it doesn't block any PR in the CI.
As soon as we have a fix; we will push a new PR to remove `--pid=host`
(a revert of revert...)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
is_atomic is defined in ceph-facts or very early in main playbook.
In non containerized deployment, is_atomic is only set in ceph-facts
which is played after ceph-validate.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
instead of using `RuntimeDirectory` parameter in systemd unit files,
let's use a systemd `tmpfiles.d` to ensure `/run/ceph`.
Explanation:
`podman` doesn't create the `/var/run/ceph` if it doesn't exist the time
where the container is run while `docker` used to create it.
In case of `switch_to_containers` scenario, `/run/ceph` gets created by
a tmpfiles.d systemd file; when switching to containers, the systemd
unit file complains because `/run/ceph` already exists
The better fix would be to ensure `/usr/lib/tmpfiles.d/ceph-common.conf`
is removed and only rely on `RuntimeDirectory` from systemd unit file parameter
but we come from a non-containerized environment which is already running,
it means `/run/ceph` is already created and when starting the unit to
start the container, systemd will still complain and we can't simply
remove the directory if daemons are collocated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`ceph-mon` tries to redeploy monitors because it assumes it was not yet
deployed since `mon_socket_stat` and `ceph_mon_container_stat` are
undefined (indeed, we stop the daemon before calling `ceph-mon` in the
switch_to_containers playbook).
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since it's already confusing whether ntp_daemon_type should be "ntp" or
"ntpd", fix the mistake in the title of the task that aborts if
ntp_daemon_type is set to "ntpd" and OS being used is Atomic.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Since Atomic doesn't allow any installations and NTPd is not present
on Atomic image we are using, abort when ntp_daemon_type is set to ntpd.
https://github.com/ceph/ceph-ansible/issues/3572
Signed-off-by: Rishabh Dave <ridave@redhat.com>
167 is the ceph uid for Red Hat based system, thus trying to deploy a
monitor on Debian fail since the ceph user id on that system is 64045.
This commit uses the ceph_uid variable which contains the right uid
based on system/container detection.
Closes: https://github.com/ceph/ceph-ansible/issues/3589
Signed-off-by: Sébastien Han <seb@redhat.com>
When {{omit}} is concatenated with another string, it expands to something
like __omit_place_holder__63eea0d96dd6ed867b95405e11d87dddf61f448d.
However, in these use-cases we need an empty string.
Regression introduced in d53f55e807.
Signed-off-by: Leah Neukirchen <leah.neukirchen@mayflower.de>
The task setup chronyd called the handler disable chronyd, which of
course defeats the purpose.
Changing the task to disable ntpd instead fixes the issue of chronyd
being disabled after it got enabled.
Fixes: #3582
Signed-off-by: Patrick C. F. Ernzer pcfe@redhat.com
Typical error:
```
fatal: [iscsi-gw0]: FAILED! =>
msg: 'an error occurred while trying to read the file ''/home/guits/ceph-ansible/tests/functional/all_daemons/fetch/e5f4ab94-c099-4781-b592-dbd440a9d6f3/iscsi-gateway.key'': [Errno 13] Permission denied: b''/home/guits/ceph-ansible/tests/functional/all_daemons/fetch/e5f4ab94-c099-4781-b592-dbd440a9d6f3/iscsi-gateway.key'''
```
`become: True` is not needed on the following task:
`copy crt file(s) to gateway nodes`.
Since it's already set in the main playbook (site.yml/site-container.yml)
The thing is that the files get generated in the 'fetch_directory' with
root user because there is a 'delegate_to' + we run the playbook with
`become: True` (from main playbook).
The idea here is to create files under ansible user so we can open them
later to copy them on the remote machine.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
With 'podman version 1.0.0' on RHEL8 beta the 'get ceph version' and
'ceph monitor mkfs' commands fail [1] with "error configuring network
namespace for container Missing CNI default network".
When net=host is added these errors are resolved. net=host is used in
many other calls (grep -R net=host | wc -l --> 38).
Fixes: #3561
Signed-off-by: John Fulton <fulton@redhat.com>
(cherry picked from commit 410abd7745)
/var/run/ceph resides in a non persistent filesystem (tmpfs)
After a reboot, all daemons won't start because this directory will be
missing.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
without this, the command `ceph-volume lvm list --format json` hangs and
takes a very long time to complete.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- also add `--foreground` which seems to fix some issue we are facing when
using timeout with `podman`.
- use this fact in the `is ceph running already?` task.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The restart_osd_daemon.sh generated from the j2 template
contains a python call which uses 'print x' instead of
'print(x)'. Add the missing parentheses to make this call
compatible with both 2 and 3.
Also add parentheses to other python print calls found
in roles/ceph-client/defaults/main.yml and
infrastructure-playbooks/cluster-os-migration.yml.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1671721
Signed-off-by: John Fulton <fulton@redhat.com>
This task used to live in ceph-osd, but we need it defined here to that
ceph-config can use it when trying to determine the number of osds.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
If user sets "docker_pull_timeout: '0'" then do not use the
timeout command when running podman/docker pull. Also, use
"timeout -s KILL"; without KILL, podman on RHEL8 beta does
not timeout and deployment can hang.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1670625
Signed-off-by: John Fulton <fulton@redhat.com>
nfs-ganesha v2.5 and 2.6 have hit EOL. Install nfs-ganesha v2.7
stable that is currently being maintained.
Signed-off-by: Ramana Raja <rraja@redhat.com>
when `ceph_origin` is set to `'repository'` and `ceph_repository` to
`'community'` we need to ensure `ceph_release` reflect
`ceph_stable_release`.
4a3f180f9d simply removed the override
while it should just have to be run only when the condition mentioned
above is satisfied.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`ceph_release` is set in `ceph-container-common` but this role is
played only on first node for clients, this means ceph-config will fail
on all client nodes except the first one.
This commit ensure ceph_release is set for all client nodes.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Enabling msgr2 style declaration for Nautilus and above. Prior releases
will keep the right syntax.
When upgrading from Mimic to Nautilus we must maintain something in the
form of:
mon_host = [v1:127.0.0.1:6789/0,v2:127.0.0.1:3300/0]
Signed-off-by: Sébastien Han <seb@redhat.com>
You can now use 'ceph_mon_container_listen_port' to change the port the
monitor will listen on.
Setting the default to 3300 (assigned by IANA) since Nautilus has released the messenger2
transport protocol.
Signed-off-by: Sébastien Han <seb@redhat.com>
This reverts commit ee08d1f89a which was
mostly to workaround a bug in ceph@master. Now, ceph@master is fixed so
reverting this. Thanks to https://github.com/ceph/ceph/pull/25900
Signed-off-by: Sébastien Han <seb@redhat.com>
With this, we could have multiple rgw instances on a single host
with a single run, don't have to use rgw-standalone.yml which does not
seems able to bind ports separately.
If you want to have multiple rgw instances, just change 'radosgw_instances'
to the number you want, which defaults to 1.
Not compatible with Multi-Site yet.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
This part of the code is not needed since ceph-ansible@master is
intended to deploy ceph@master only.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This condition is useless and it's also creating issues we don't see in
our CI. ceph_release is set by either ceph-common or ceph-docker-common
so let's keep it this way.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1645379
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Somewhat something changed with the introduction of msg2 and we have to
add each node as a peer so the monitors can form a quorum. This might be
due to our CI environment, although adding this is completly harmless
and solves monitors not being able to form quorum.
It seems that the initial monitor map wasn't containing the right
information about the peers (addresses like 0.0.0.0/0r1, for each rank.
Signed-off-by: Sébastien Han <seb@redhat.com>
The nfs_ganesha_dev_apt_repo variable was set incorrect in task
"fetch nfs-ganesha development repository"
Signed-off-by: Bruceforce <Bruceforce@users.noreply.github.com>
If we don't copy the key after the package install the directory /var/lib/ceph/bootstrap-rbd-mirror
will not exist and the copy will fail.
Signed-off-by: Sébastien Han <seb@redhat.com>
We don't need to create the directories on non-containers, they are
created by the packages.
Closes: https://github.com/ceph/ceph-ansible/issues/3430
Signed-off-by: Sébastien Han <seb@redhat.com>
When one of the currently supported NTP services has been set up,
disable rest of the NTP services on Ceph nodes.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Merge ntp_debian.yml and ntp_rpm.yml into one (the new file is called
setup_ntp.yml) since they are almost identical. Also avoid repetition
of the common setup step for ntpd and chronyd services.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Since the current user on the controller node, might not have the
permission to read the TLS certificate and related files, copy these
files to the Ceph nodes as root user.
Fixes: https://github.com/ceph/ceph-ansible/issues/3465
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Make linter happy and add more robustness to remote tasks by retrying 3
times (the default) before failing.
Signed-off-by: Sébastien Han <seb@redhat.com>
These aliases have led to several issues making believe that ceph
binaries are actually present on the host when running the command.
However it wasn't explicit that the commands were only ran inside a
container.
It has brought to much confusion so we decided to remove them.
Closes: https://github.com/ceph/ceph-ansible/issues/3445
Signed-off-by: Sébastien Han <seb@redhat.com>
sometimes we play the whole role `ceph-defaults` just to access the
default value of some variables. It means we play the `facts.yml` part
in this role while it's not desired. Splitting this role will speedup
the playbook.
Closes: #3282
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We want to test podman on f29 non-atomic, atomic is not a hard
requirement. However, if you want to get podman then you will have to
install it first before running the playbook.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit removes the default module, so ceph-ansible does not enable
any manager module.
To enable a module you need to set a value to 'ceph_mgr_modules', you
can pass a list of modules like this:
ceph_mgr_modules:
- status
- dashboard
Signed-off-by: Sébastien Han <seb@redhat.com>
Json is a type structure which is always typed as a string, where before
this we were declaring a dict, which is not a json valid structure.
Signed-off-by: Sébastien Han <seb@redhat.com>
The code is now able (again) to start osds that where configured with
ceph-disk on a non-container scenario.
Closes: https://github.com/ceph/ceph-ansible/issues/3388
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 452069cb3a)
Applying and passing the OSD_BLUESTORE/FILESTORE on the fly is wrong for
existing clusters as their config will be changed.
Typically, if an OSD was prepared with ceph-disk on filestore and we
change the default objectstore to bluestore, the activation will fail.
The flag osd_objectstore should only be used for the preparation, not
activation. The activate in this case detects the osd objecstore which
prevents failures like the one described above.
Signed-off-by: Sébastien Han <seb@redhat.com>
If an existing cluster runs this config, and has ceph-disk OSD, the
`expose_partitions` won't be expected by jinja since it's inside the
'old' if. We need it as part of the osd_scenario != 'lvm' condition.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1640273
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit unifies the container and non-container code, which in the
meantime gives use the ability to deploy N mon container at the same
time without having to serialized the deployment. This will drastically
reduces the time needed to bootstrap the cluster.
Note, this is only possible since Nautilus because the monitors are
bootstrap the initial keys on their own once they reach quorum. In the
Nautilus version of the ceph-container mon, we stopped generating the
keys 'manually' from inside the container, for more detail see: https://github.com/ceph/ceph-container/pull/1238
Signed-off-by: Sébastien Han <seb@redhat.com>
When collocating mon and mgr, the mgr container will attempt to create
its own key since it has the admin key at its disposal. Also at this
point there is nothing to fetch since the key is not created by the
mons, as mentionned above the mgr creates the key on its own.
Signed-off-by: Sébastien Han <seb@redhat.com>
This will speed up the deployment and also deploy mon and mgr collocated
just as recommended.
This won't prevent you of adding more and dedicaded machines for mgr if
needed.
Signed-off-by: Sébastien Han <seb@redhat.com>
During the first iteration, the command won't return anything, or can
simply fail and might not return a valid json structure. Ansible will
fail parsing it in the filter `from_json` so let's default that variable
to empty dictionary.
Signed-off-by: Sébastien Han <seb@redhat.com>
This removes a bit of unnecessary code, the check was always wrong
because of the condition 'not ceph_current_status.get('rc', 1) == 0'
It will never match since `Not` is used for bool and we are checking for
an rc.
Also, even though the check would work, this will be a major blocker for
a complete meltdown. If the whole platform is shutdown then nothing will
be up but files will be present, so this check is definitely wrong.
Signed-off-by: Sébastien Han <seb@redhat.com>
This is false, `./defaults/main.yml` is not supposed to be modified
directly. groups_vars a/o host_vars should always be preferred.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will fix the following yamllint warning:
Variables should have spaces after {{ and before }}
Signed-off-by: Christian Berendt <berendt@betacloud-solutions.de>
change default value of `radosgw_address` to keep consistency with
`monitor_address`.
Moreover, `ceph-validate` checks if the value is '0.0.0.0' to determine
if it has to run `check_eth_rgw.yml`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600227
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is not needed to play these tasks on nodes that are not in rgw
group.
Always playing this code makes `shrink_mon.yml` failing.
Typical error:
```
TASK [ceph-defaults : set_fact _radosgw_address to radosgw_interface - ipv4] ***
task path: /home/jenkins-build/build/workspace/ceph-ansible-prs-dev-shrink_mon/roles/ceph-defaults/tasks/set_radosgw_address.yml:21
Thursday 22 November 2018 12:34:51 +0000 (0:00:00.154) 0:00:12.371 *****
fatal: [localhost]: FAILED! => {}
MSG:
The task includes an option with an undefined variable. The error was: 'ansible.vars.hostvars.HostVarsVars object' has no attribute u'ansible_eth1'
```
Indeed, `radosgw_interface` is the network interface on rgw only. It is
expected that this same interface doesn't exist on `localhost`, so, when
running `shrink_mon.yml`, the role `ceph-defaults` is called in
`hosts: localhost` and causes the playbook to fail.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It seems Atomic 7.5 has podman already, however this is an old version
(0.4). The podman integration is targetting RHEL 8, so Fedora is
currently the closest to that.
Signed-off-by: Sébastien Han <seb@redhat.com>
During its initialisation both rbd-target-api and rbd-target-gw try to
open /dev/log for their syslog handler. If the device is not present the
service fails to start. Thus expose /dev/log from the host in the
container solves that problem.
Signed-off-by: Sébastien Han <seb@redhat.com>
Since 84fcf4639140c390a7f1fcd790ba190503713f86 we now use the container
binary cli to create ceph keys instead of creating a container and
'docker execing' into it.
Signed-off-by: Sébastien Han <seb@redhat.com>
In order to be able to retrieve udev information, we must expose its
socket. As per, https://github.com/ceph/ceph/pull/25201 ceph-volume will
start consuming udev output.
Signed-off-by: Sébastien Han <seb@redhat.com>
This is to add a granularity level.
We can have ceph specific variables that user shouldn't have to change
here.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add real default value for osd pool size customization.
Ceph itself has an `osd_pool_default_size` default value to `3`.
If users don't specify a pool size in various pools definition within
ceph-ansible, we should default to `3`.
By the way, this kind of condition isn't really clear:
```
when:
- rbd_pool_size | default ("")
```
we should try to get the customized value then default to what is in
`osd_pool_default_size` (which has its default value pointing to
`ceph_osd_pool_default_size` (`3`) as well) and compare it to
`ceph_osd_pool_default_size`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`osd_pool_default_pg_num` parameter is set in `ceph-mon`.
When using ceph-ansible with `--limit` on a specifc group of nodes, it
will fail when trying to access this variables since it wouldn't be
defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1518696
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ceph.conf doesn't accept float value.
Typical error seen:
```
$ sudo ceph daemon osd.2 config get osd_memory_target
Can't get admin socket path: unable to get conf option admin_socket for osd.2:
parse error setting 'osd_memory_target' to '7823740108,8' (strict_si_cast:
unit prefix not recognized)
```
This commit ensures the value inserted in ceph.conf will be an integer.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It is safer to use the list filter than the keys() method since the keys
method does have some interoperability issues between python2 and
python3 based ansible/jinja.
Signed-off-by: Boris Ranto <branto@redhat.com>
If you use python3 based ansible then keys() returns a dict_keys object,
not a list of keys. This breaks the installation on such a system. Using
the list filter provides a more robust solution that should work on both
python2 and python3 based ansible. You can find some more information
about the issue, here:
https://github.com/ansible/ansible/issues/19514
Signed-off-by: Boris Ranto <branto@redhat.com>
* The default value of osd_memory_target used by ceph is 4294967296 bytes,
so use the same as ceph-ansible default.
* Convert ansible_memtotal_mb to bytes to calculate osd_memory_target
Signed-off-by: Neha Ojha <nojha@redhat.com>
This error was introduced in the recent refactor of ceph-docker-common
in https://github.com/ceph/ceph-ansible/pull/3251. However, the Ansible
galaxy linter is not happy about it and fails importing the role.
Removing this since it's not used anymore.
Signed-off-by: Sébastien Han <seb@redhat.com>
if firewalld.service systemd unit is masked, the handler will fail when
trying to restart it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1650281
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since `ceph-volume` introduction, there is no need to split those tasks.
Let's refact this part of the code so it's clearer.
By the way, this was breaking rolling_update.yml when `openstack_config:
true` playbook because nothing ensured OSDs were started in ceph-osd role (In
`openstack_config.yml` there is a check ensuring all OSD are UP which was
obviously failing) and resulted with OSDs on the last OSD node not started
anyway.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Those tasks aren't needed in docker-common since the introduction of
`ceph-infra` role. They are duplicated tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this is already done in ceph-defaults, there is no need to have this
check in ceph-docker-common.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this fact is already set in ceph-defaults, there is no need to set it
again in ceph-docker-common
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Instead of looping over a list of packages or repeating the task
separately for different packages, pass the list of packages to the
task performing package management.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
This is needed for Nautilus since the ceph-create-keys script goes away.
(https://github.com/ceph/ceph/pull/21305)
Now the module if called with 'state: fetch_initial_keys' will lookup
keys generated by the monitor and write them down on the filesystem to
the right location (/etc/ceph and /var/lib/ceph/boostrap*).
This is not applicable to container since keys are generated by the
container only.
Signed-off-by: Sébastien Han <seb@redhat.com>
The firewall setup for igw is not getting setup because iscsi_group_name
does not it exist. It should be iscsi_gw_group_name.
Signed-off-by: Mike Christie <mchristi@redhat.com>
The default igw api port is 5000 in the manual setup docs and
ceph-iscsi-config package so this syncs up ansible.
Signed-off-by: Mike Christie <mchristi@redhat.com>
This is needed for Nautilus since the ceph-create-keys script goes away.
(https://github.com/ceph/ceph/pull/21305)
Now the module if called with 'state: fetch_initial_keys' will lookup
keys generated by the monitor and write them down on the filesystem to
the right location (/etc/ceph and /var/lib/ceph/boostrap*).
This is not applicable to container since keys are generated by the
container only.
Signed-off-by: Sébastien Han <seb@redhat.com>
description = 'Use `when: var` rather than `when: var != ""` (or ' \ 'conversely `when: not var` rather than `when: var == ""`)'
Signed-off-by: Sébastien Han <seb@redhat.com>
The use of a handler meant that the cache would be updated at the very
end of the play, which doesn't work when adding a development repo and
trying to install right after it. This mostly reverts
53cdddf886 without an actual `git revert`
because that caused other conflicts.
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Update the meta with the relavant support such as:
* ansible version: min 2.4
* distro supported (tested on) centos 7
Signed-off-by: Sébastien Han <seb@redhat.com>
Do not run the linter for these 3:
* we use latest for pip docker-py package
* for ssl keys this is a false positive since the inital command is a
'shell' it'll always change
* for keystone, we must use shell since the with_items contains pipes
Signed-off-by: Sébastien Han <seb@redhat.com>
Calling command should have changed_when false otherwise each time it
runs it will show as 'changed' and this is irrelevant.
Commands should not change things if nothing needs doing
Signed-off-by: Sébastien Han <seb@redhat.com>
since the jinja logic has been moved into ansible task, we can simply
this part of the code and use `_current_monitor_address`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
So we don't have to loop over `_monitor_addresses` when we need the
monitor address of the current node being played.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
using consecutive set_fact in the playbook instead of complex jinja syntax
makes ceph.conf.j2 more readable.
By the way, jinja can be painful to debug at some point.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Latest ansible version at the moment is 2.7
We should explicitly require 2.7 only on master branch.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Let's test ceph-ansible master against ansible 2.7 to catch early any
potential issue with this ansible version.
Closes: #3148
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
run commands on containers when containerized deployments.
(At the moment, all commands are run on the host only)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since `rgw_multisite_endpoint_addr` has a default value to
`{{ ansible_fqdn }}`, it shouldn't be mandatory to set this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- updated README-MULTISITE
- re-added destroy.yml
- added tasks in ceph-validate to make sure the
rgw multisite vars are set
Signed-off-by: Ali Maredia <amaredia@redhat.com>
We should give users the possibility to set the IP they want as
multisite endpoint, setting the default value to `{{ ansible_fqdn }}` to
not force them to set this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- remove destroy tasks
- cleanup conditionals and syntax
- remove unnecessary realm pulls
- enable multisite to be tested in automated
testing infra
- add multisite related vars to main.yml and
group_vars
- update README-MULTISITE
- ensure all `radosgw-admin` commands are being run
on a mon
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Since we do not have enough data to put valid upper bounds for the memory
usage of these daemons, do not put artificial limits by default. This will
help us avoid failures like OOM kills due to low default values.
Whenever required, these limits can be manually enforced by the user.
More details in
https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Signed-off-by: Neha Ojha <nojha@redhat.com>
we ensure that firewalld is installed and running before adding any
rule. This has no sense anymore not to reload firewalld once the rule
are added.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The playbook has various improvements:
* run ceph-validate role before doing anything
* run ceph-fetch-keys only on the first monitor of the inventory list
* set noup flag so PGs get distributed once all the new OSDs have been
added to the cluster and unset it when they are up and running
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1624962
Signed-off-by: Sébastien Han <seb@redhat.com>
This commits simplies the usage of the ceph-fetch-keys role. The role
now has a nicer way to find various ceph keys and fetch them on the
ansible server.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1624962
Signed-off-by: Sébastien Han <seb@redhat.com>
Currently a throw-away container is built to run ceph client
commands to setup users, pools & auth keys. This utilises
the same base ceph container which has all the ceph services
inside it.
This PR allows the use of a separate container if the deployer
wishes - but defaults to use the same full ceph container.
This can be used for different architectures or distributions,
which may support the the Ceph client, but not Ceph server,
and allows the deployer to build and specify a separate client
container if need be.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
a non skipped task won't have the `skipped` attribute, so `start
firewalld` task will complain about that.
Indeed, `skipped` and `rc` attributes won't exist since the first task
`check firewalld installation on redhat or suse` won't be skipped in
case of non-containerized deployment.
Fixes: #3236
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1541840
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Liberty is no longer available in the UCA. The last available release there
is currently Queens.
Signed-off-by: Christian Berendt <berendt@betacloud-solutions.de>
`ceph_osd_container_stat` might not be set on other osd node.
We must ensure we are on the last node before trying to evaluate
`ceph_osd_container_stat`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of now, we should no longer support Jewel in ceph-ansible.
The latest ceph-ansible release supporting Jewel is `stable-3.1`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit does a couple of things:
* Avoid code duplication
* Clarify the code
* add more unit tests
* add myself to the author of the module
Signed-off-by: Sébastien Han <seb@redhat.com>
This task was created for ceph-disk based deployments so it's not needed
when osd are prepared with ceph-volume.
Signed-off-by: Sébastien Han <seb@redhat.com>
The restart script wasn't working with the current new addition of
ceph-volume in container where now OSDs have the OSD id name in the
container name.
Signed-off-by: Sébastien Han <seb@redhat.com>
Now that the container is named ceph-osd@<id> looking for something that
contains a host is not necessary. This is also backward compatible as it
will continue to match container names with hostname in them.
Signed-off-by: Sébastien Han <seb@redhat.com>
We don't need to pass the device and discover the OSD ID. We have a
task that gathers all the OSD ID present on that machine, so we simply
re-use them and activate them. This also handles the situation when you
have multiple OSDs running on the same device.
Signed-off-by: Sébastien Han <seb@redhat.com>
We don't need to pass the hostname on the container name but we can keep
it simple and just call it ceph-osd-$id.
Signed-off-by: Sébastien Han <seb@redhat.com>
expose_partitions is only needed on ceph-disk OSDs so we don't need to
activate this code when running lvm prepared OSDs.
Signed-off-by: Sébastien Han <seb@redhat.com>
The batch option got recently added, while rebasing this patch it was
necessary to implement it. So now, the batch option can work on
containerized environments.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1630977
Signed-off-by: Sébastien Han <seb@redhat.com>
At the moment, all daemons accept connections from 0.0.0.0.
We should at least restrict to public_network and add
cluster_network for OSDs.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1541840
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Fixes the deprecation warning:
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of
using `result|search` use `result is search`.
Signed-off-by: Noah Watkins <nwatkins@redhat.com>
These checks will never pass unless ceph_stable_release is passed and
ceph-defaults is run before ceph-validate. Additionally, we don't want
to support deploying jewel upstream at ceph-ansible master.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1637537
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Check firewall isn't working as expected and might break deployments.
This part of the code will be reworked soon.
Let's focus on configure_firewall code for now.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1541840
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Instead used "import_tasks" and "include_tasks" to tell whether tasks
must be included statically or dynamically.
Fixes: https://github.com/ceph/ceph-ansible/issues/2998
Signed-off-by: Rishabh Dave <ridave@redhat.com>
`monitor_address_block` should be read from hostvars[host] instead of
current node being played.
eg:
Let's assume we have:
```
[mons]
ceph-mon0 monitor_address=192.168.1.10
ceph-mon1 monitor_interface=eth1
ceph-mon2 monitor_address_block=192.168.1.0/24
```
the ceph.conf generation task will end up with:
```
fatal: [ceph-mon0]: FAILED! => {}
MSG:
'ansible.vars.hostvars.HostVarsVars object' has no attribute u'ansible_interface'
```
the reason is that it will assume `monitor_address_block` isn't defined even on
ceph-mon2 because looking for `monitor_address_block` instead of
`hostvars[host]['monitor_address_block']`, therefore it enters in the condition as default value:
```
{%- else -%}
{% set interface = 'ansible_' + (monitor_interface | replace('-', '_')) %}
{% if ip_version == 'ipv4' -%}
{{ hostvars[host][interface][ip_version]['address'] }}
{%- elif ip_version == 'ipv6' -%}
[{{ hostvars[host][interface][ip_version][0]['address'] }}]
{%- endif %}
{%- endif %}
```
`monitor_interface` is set with default value `'interface'` so the `interface`
variable is built with 'ansible_' + 'interface'. It makes ansible throwing a
confusing message about `'ansible_interface'`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1635303
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Allow user to choose between timesyncd, chronyd and ntpd
Installation will default to timesyncd since it is distributed as
part of the systemd installation for most distros.
Added note indicating NTP daemon type is not used for containerized
deployments.
Fixes issue #3086 on Github
Signed-off-by: Benjamin Cherian <benjamin_cherian@amat.com>
The linux kernel target layer, LIO, does not support the iscsi target to
mix ACLs that have chap enabled and disabled under the same tpg. This
patch adds a check and fails if this type of setup is detected.
This fixes Red Hat BZ:
https://bugzilla.redhat.com/show_bug.cgi?id=1615088
Signed-off-by: Mike Christie <mchristi@redhat.com>
The role contains all the handlers for Ceph services. We decided to
leave ceph-defaults role with variables and a few facts only. This is
useful when organizing the site.yml files and also adding the known
variables to infrastructure-playbooks.
Signed-off-by: Sébastien Han <seb@redhat.com>
As per #1013 it appears that BS will soon use THP to lower TLB misses,
also disabling THP hasn't demonstrated any gains so far.
Closes: https://github.com/ceph/ceph-ansible/issues/1013
Signed-off-by: Sébastien Han <seb@redhat.com>
`+` is more idiomatic for "one or more" in a regex than `{1,}`; the
latter was introduced in a previous fix for an incorrect `{1,2}`
restriction.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
After restarting each OSD, restart_osd_daemon.sh checks that the
cluster is in a good state before moving on to the next one. One of
the checks it does is that the number of pgs in the state
"active+clean" is equal to the total number of pgs in the cluster.
On large clusters (e.g. we have 173,696 pgs), it is likely that at
least one pg will be scrubbing and/or deep-scrubbing at any one
time. These pgs are in state "active+clean+scrubbing" or
"active+clean+scrubbing+deep", so the script was erroneously not
including them in the "good" count. Similar concerns apply to
"active+clean+snaptrim" and "active+clean+snaptrim_wait".
Fix this by considering as good any pg whose state contains
active+clean. Do this as an integer comparison to num_pgs in pgmap.
(could this be backported to at least stable-3.0 please?)
Closes: #2008
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
Previously RETRIES was set (by default to 40) once at the start of the
script; this meant that it would only ever wait for up to 40 lots of
30s across *all* the OSDs on a host before bombing out. In fact, we
want to be prepared to wait for the same amount of time after each OSD
restart for the clusters' pgs to be happy again before continuing.
Closes: #3154
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
...with the exception of the purge operation, since
removing Calamari would still be useful for an old
cluster.
Signed-off-by: John Spray <john.spray@redhat.com>
For now our best guess is to count the number of devices and multiply
by osds_per_device. Ideally we'd like to run ceph-volume lvm batch
--report and get the number of OSDs that way, but currently we need
a ceph.conf in place already before we can do that. There is a tracker
ticket that would allow os to get around the need for a ceph.conf:
http://tracker.ceph.com/issues/36088
Fixes: https://github.com/ceph/ceph-ansible/issues/3135
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
the default value for _rgw_hostname was took from the current node being
played while it should be took from the respective node in the loop.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622505
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This avoids errors when the osd scenario choosen does not require
setting devices or lvm_volumes. The default values for these are not
set because they exist in the ceph-osd role, not ceph-defaults.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
BlueStore's cache is sized conservatively by default, so that it does
not overwhelm under-provisioned servers. The default is 1G for HDD, and
3G for SSD.
To replace the page cache, as much memory as possible should be given to
BlueStore. This is required for good performance. Since ceph-ansible
knows how much memory a host has, it can set
`bluestore cache size = max(total host memory / num OSDs on this host * safety
factor, 1G)`
Due to fragmentation and other memory use not included in bluestore's
cache, a safety factor of 0.5 for dedicated nodes and 0.2 for
hyperconverged nodes is recommended.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1595003
Signed-off-by: Neha Ojha <nojha@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
The commit:
commit 1164cdc002
Author: Guillaume Abrioux <gabrioux@redhat.com>
Date: Thu Aug 2 11:58:47 2018 +0200
iscsigw: install ceph-iscsi-cli package
installs the cli package but does not start and enable the
rbd-target-api daemon needed for gwcli to communicate with the igw
nodes. This patch just enables and starts it for the non-container
setup. The container setup is already doing this.
This fixes bz https://bugzilla.redhat.com/show_bug.cgi?id=1613963
Signed-off-by: Mike Christie <mchristi@redhat.com>
As of rhel 7.6, it has been decided it doesn't make sense to confine
`ganesha_t` anymore. It means this domain won't exist anymore.
Let's add a `failed_when: false` in order to make the deployment not
failing when trying to run this command.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1626070
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If this is set to anything other than the default value of 1 then the
--osds-per-device flag will be used by the batch command to define how
many osds will be created per device.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This command line is not supported.
According to official documentation:
```
Note that shell command lines are not directly supported.
If shell command lines are to be used,
they need to be passed explicitly to a shell implementation of some kind.
```
We must run this using /bin/sh instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
let's add ansible_hostname as a default value for rgw_hostname if no
hostname in servicemap matches ansible_fqdn.
Fixes: #3063
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622505
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit is adding quotes that make keyring unusuable
eg:
```
client.john
key: AQAN0RdbAAAAABAAH5D3WgMN9Rxw3M8jkpMIfg==
caps: [mds] ''
caps: [mgr] 'allow *'
caps: [mon] 'allow rw'
caps: [osd] 'allow rw'
```
Trying to import such a keyring and use it will result:
```
Error EACCES: access denied
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1623417
This reverts commit 424815501a.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When ceph-nfs is deployed containerized and ceph-common is not
installed on the host the start_nfs task fails because the rados
command is missing on the host.
Run rados commands from a ceph container instead so that
they will succeed.
Signed-off-by: Tom Barron <tpb@dyncloud.net>
If the ceph-radosgw target is not enabled, then enabling the
ceph-radosgw@ service has no effect since nothing will pull
it on the next reboot. As such, we need to ensure that the
target is enabled.
Signed-off-by: Markos Chandras <mchandras@suse.de>
The dummy client container currently wont work on non-x86_64 hosts.
This PR creates a filtered client group that contains only hosts
that are x86_64 - which can then be the group to run the
dummy container against.
This is for the specific case of a containerized_deployment where
there is a mixture of non-x86_64 hosts and x86_64 hosts. As such
the filtered group will contain all hosts when running with
containerized_deployment: false.
Currently ppc64le is not supported for Ceph server components.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
A couple if things were wrong in the initial commit:
* ceph_release_num[ceph_release] >= ceph_release_num['luminous'] will
never work since the ceph_release fact is set in the roles after. So
either ceph-common or ceph-docker-common set it
* we can easily re-use the initial command to check if a cluster is
running, it's more elegant than running it twice.
* set the fact rgw_hostname on rgw nodes only
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1618678
Signed-off-by: Sébastien Han <seb@redhat.com>
The config_template plugin exists in the ceph-common role so that
config_template will still work with ansible galaxy.
This PR syncs the config_template module from the base of the repo in
plugins/actions to the ceph-common role.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
If there are no services on the cluster, then the 'rgw' could be missing
and the task is failing with the following problem:
msg": "The task includes an option with an undefined variable.
The error was: 'dict object' has no attribute 'rgw'
We fix this by checking the existence of the 'rgw' attribute. If it's
missing, we skip the task since the role already contains code to set
a good default rgw_hostname.
Signed-off-by: Markos Chandras <mchandras@suse.de>
Since commit f422efb1d6 ("config: ensure
rgw section has the correct name") we observe the following failures in
new Ceph deployment with OpenStack-Ansible
fatal: [aio1_ceph-rgw_container-fc588f0a]: FAILED! => {"changed": false,
"cmd": "ceph --cluster ceph -s -f json", "msg": "[Errno 2] No such file
or directory"
This is because the task executes 'ceph' but at this point no package
installation has happened. Packages are normally installed in the
'ceph-common' role which runs after the 'ceph-defaults' one.
Since we are looking to obtain cluster information, the task should be
delegated to a monitor node similar to other tasks in that role
Signed-off-by: Markos Chandras <mchandras@suse.de>
Follow up on 36942af698
"disabled_modules" is always a list, it's the items in the list that
can be dicts in mimic. Many ways to fix this, here's one.
Signed-off-by: Dardo D Kleiner <dardokleiner@gmail.com>
This reverts commit e84f11e99e.
This commit was giving a new failure later during the rolling_update
process. Basically, this was modifying the list of devices and started
impacting the ceph-osd itself. The modification to accomodate the
osd_auto_discovery parameter should happen outside of the ceph-osd.
Also we are trying to not play ceph-osd role during the rolling_update
process so we can speed up the upgrade.
Signed-off-by: Sébastien Han <seb@redhat.com>
fqdn configuration possibility caused a lot of trouble, it's adding a
lot of complexity because of multiple cases and the relation between
ceph-ansible and ceph-container. Moreover, there is no benefit for such
a feature.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1613155
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the ceph.conf.j2 always assumes the hostname used to register the
radosgw in the servicemap is equivalent to `{{ ansible_hostname }}`
which returns the shortname form.
We need to detect which form of the hostname was used in case of already
deployed cluster and update the ceph.conf accordingly.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1580408
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
there is no need to have all these conditions.
for instance, assuming `mds_group_name` is set to 'mdss':
- `if groups[mds_group_name] is defined` checks if `'mdss'` is present in `{{ groups }}`
- `if {{ mds_group_name }} in group_names` checks if the current node is part
the group `'mdss'`
- `if inventory_hostname in groups.get(mds_group_name, [])` checks if
the current node is part of the group 'mdss'
The third condition is enough to cover the need of ensuring we are
running on a mds node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If calamari is already installed and ceph has been upgraded to a higher
version the initialisation will fail later. So if we detect the
calamari-server is too old compare to ceph_rhcs_version we try to update
it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1601755
Signed-off-by: Sébastien Han <seb@redhat.com>
rolling_update relies on the list of devices when performing the restart
of the OSDs. The task that is builind the devices list out of the
ansible_devices dict only runs when there are no partitions on the
drives. However during an upgrade the OSD are already configured, they
have been prepared and have partitions so this task won't run and thus
the devices list will be empty, skipping the restart during
rolling_update. We now run the same task under different requirements
when rolling_update is true and build a list when:
* osd_auto_discovery is true
* rolling_update is true
* ansible_devices exists
* no dm/lv are part of the discovery
* the device is not removable
* the device has more than 1 sector
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1613626
Signed-off-by: Sébastien Han <seb@redhat.com>
This is used with the lvm osd scenario. When using devices you need the
option to set the crush device class for all of the OSDs that are
created from those devices.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This adds the action 'batch' to the ceph-volume module so that we can
run the new 'ceph-volume lvm batch' subcommand. A functional test is
also included.
If devices is defind and osd_scenario is lvm then the 'ceph-volume lvm
batch' command will be used to create the OSDs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Since the container now simply reads the ceph.conf, we remove all the
unnecessary options.
Also this PR is the foundation to support multiple backend, such as the
new 'beast' from Ceph Mimic.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1582411
Signed-off-by: Sébastien Han <seb@redhat.com>
The include does not need a condition on containerized_deployment since
we are already in an include than has the same condition.
Signed-off-by: Sébastien Han <seb@redhat.com>
In environments where we wish to have manual/greater control over
how the bootstrap keyrings are used, we need to able to externally
define what the mgr keyring secret will be and have ceph-ansible
use it, instead of it being autogenerated
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1610213
Signed-off-by: Graeme Gillies <ggillies@akamai.com>
deployment.
restart_osd_daemon.sh is used to discover and restart all OSDs on a
host. To do it the scripts loops the list of ceph-osd@ services in the
system. This commit fixes bug in the regular expression responsile for
extraction of OSDs - prior version uses `[0-9]{1,2}` expression
which is ignoring all OSDS which numbers are greater than 99 (thus
longer than 2 digits). Fix removed upper limit of digits in the number.
This problem existed in two places in the script.
Closes: #2964
Signed-off-by: Artur Fijalkowski <artur.fijalkowski@ing.com>
This commit ensures we are backward compatible with fqdn deployments.
Since ceph-container enforces deployment to be done with shortname, we
must keep backward compatibility with clusters already deployed with
fqdn configuration
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This was introduced by
59ee2e8d3b
and made our socket checks impossible to run. The PID could be found,
but the cctid cannot.
This happens during upgrade to mimic and on cluster running on mimic.
So let's force the admin socket the way it was so we can properly check
for existing instances also the line $cluster-$name.$pid.$cctid.asok
is only needed when running multiple instances of the same daemon,
thing ceph-ansible cannot do at the time of writing
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1610220
Signed-off-by: Sébastien Han <seb@redhat.com>
Instead of failing the entire purge operation when the rbd command fails
just log an error. This will allow the higher level target and config
cleanup to complete, and the user only has to manually delete the rbd
images.
Signed-off-by: Mike Christie <mchristi@redhat.com>
We were not passing in the ceph conf info into the rbd image removal
command, so if the clustername was not the default igw purge would fail
due to the rbd rm command failing.
This just fixes the bug by passing in the ceph conf info which has the
clustername to use.
This fixes Red Hat bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1601949
Signed-off-by: Mike Christie <mchristi@redhat.com>
The container runs with --rm which means it will be deleted by Docker
when exiting. Also 'docker rm -f' is not idempotent and returns 1 if the
container does not exist.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1609007
Signed-off-by: Sébastien Han <seb@redhat.com>
rbd-mirror can't start when deploying jewel because it needs admin
keyring.
Getting back this task brings backward compatibility for jewel
deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If we want to be backward compatible with release prior to luminous, we
have to set the rule name accordingly to default values used in jewel.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This task would be run on both containerized *and* non containerized
deployment.
Let's have a proper title to avoid confusion.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In containerized deployments we now inherite from the
radosgw_civetweb_options options when bootstrapping the container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1582411
Signed-off-by: Sébastien Han <seb@redhat.com>
When distributing ceph-nfs role, creation of rados index object
fails as it assumes availability of client.admin locally.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1607970
Signed-off-by: Giulio Fidente <gfidente@redhat.com>
Check if the interface provided:
* exists in the gathered facts (thus on the system)
* is active
* has an IP address (depending on ip_version )
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600227
Signed-off-by: Sébastien Han <seb@redhat.com>
Ansible 2.4 is currently end-of-life.
Ansible 2.5 will go end-of-life after Ansible 2.7 is released.
Fixes: #2901
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Do not run device validation on every hosts, only on OSD nodes.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
We know make sure that:
* devices are actually block special files
* length of dedicated_device is identical to devices
Signed-off-by: Sébastien Han <seb@redhat.com>
Since `V2.6-stable` is available and has packages for `mimic`, let's
update this default value accordingly so nfs nodes can be deployed with
mimic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Relying on `copy_admin_key` to import created keys on client nodes makes
us obliged to copy admin key on those nodes which is not something we might
want.
We should use the fact `condition_copy_admin_key` which will be set to
`True` when the delegated node is a mon which means we can import keys
without taking care of admin keyring.
Fixes: #2867
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Follow up on #2784
We must check in the generated fact `_disabled_ceph_mgr_modules` to
enable disabled mgr module.
Otherwise, this task will be skipped because it's not comparing the
right list.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600155
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
On containerized deployment, if a mon is stopped, the socket is not
purged and can cause failure when a cluster is redeployed after the
purge playbook has been run.
Typical error:
```
fatal: [osd0]: FAILED! => {}
MSG:
'dict object' has no attribute 'osd_pool_default_pg_num'
```
the fact is not set because of this previous failure earlier:
```
ok: [mon0] => {
"changed": false,
"cmd": "docker exec ceph-mon-mon0 ceph --cluster test daemon mon.mon0 config get osd_pool_default_pg_num",
"delta": "0:00:00.217382",
"end": "2018-07-09 22:25:53.155969",
"failed_when_result": false,
"rc": 22,
"start": "2018-07-09 22:25:52.938587"
}
STDERR:
admin_socket: exception getting command descriptions: [Errno 111] Connection refused
MSG:
non-zero return code
```
This failure happens when the ceph-mon service is stopped, indeed, since
the socket isn't purged, it's a leftover which is confusing the process.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When you delete a zone without removing from zonegroup, the period update would
fail since that command needs to load the zone and zonegroup to be able to
update the master. Period update would fail with an error like this:
radosgw-admin period update --commit
-1 Cannot find zone id= (name=), switching to local zonegroup configuration
-1 Cannot find zone id= (name=)
Signed-off-by: Shilpa Jagannath <smanjara@redhat.com>
As of Kraken, the journal code does not use the hdparm command anymore
so we can remove it from our package dependency list.
Fixes: https://github.com/ceph/ceph-ansible/issues/1402
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit f6910efa24389c264062963b2054c7cd29ffebb3)
The container image recently merged both cluster and mon log into a
single stream. Following this, we now see this warning coming from the
container image:
2018-06-19 13:44:01.542990 7ff75b024700 1 mon.vm02@1(peon).log
v57928205 unable to write to '/var/log/ceph/ceph.log' for channel
'cluster': (2) No such file or directory
So we now tell the mon to not log cluster log on the filesystem.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1591771
Signed-off-by: Sébastien Han <seb@redhat.com>
We forgot to add mgr_group_name when checking for the mon repo, thus the
conditional on the next task was failing.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1598185
Signed-off-by: Sébastien Han <seb@redhat.com>
The data structure has slightly changed on mimic.
Prior to mimic, it used to be:
```
{
"enabled_modules": [
"status"
],
"disabled_modules": [
"balancer",
"dashboard",
"influx",
"localpool",
"prometheus",
"restful",
"selftest",
"zabbix"
]
}
```
From mimic it looks like this:
```
{
"enabled_modules": [
"status"
],
"disabled_modules": [
{
"name": "balancer",
"can_run": true,
"error_string": ""
},
{
"name": "dashboard",
"can_run": true,
"error_string": ""
}
]
}
```
This means we can't simply check if `item` is in `item in
_ceph_mgr_modules.disabled_modules`
the idea here is to use filter `map(attribute='name')` to build a list
when deploying mimic.
Fixes: #2766
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The container runs for 300 sec, then dies and removes itself thanks to
the '--rm' option, so there is no point of removing it. Also this is
causing failure under some circonstances.
Closing: https://bugzilla.redhat.com/show_bug.cgi?id=1568157
Signed-off-by: Sébastien Han <seb@redhat.com>
We now add a default 'rbd' application type to each pool we create. This
will remove the warning: " application not enabled on N pool(s) "
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1590275
Signed-off-by: Sébastien Han <seb@redhat.com>
The script ceph-osd-run.sh holds the config options to start the
container, if one of these options are modified we must restart the
container. This was not the case before becauase the 'notify' flag
wasn't present.
Closing: https://bugzilla.redhat.com/show_bug.cgi?id=1596061
Signed-off-by: Sébastien Han <seb@redhat.com>
When using a module there is no need to apply this Ansible option. The
module will handle the idempotency on its own. So the module decides
wether or not the task has changed during the execution.
Signed-off-by: Sébastien Han <seb@redhat.com>
keyring files in /etc/ceph. Default value is the same as it was (0600),
but this variable allows user to override it (f.e. set it to 0640).
Signed-off-by: George Shuklin <george.shuklin@gmail.com>
During 226f80c22b only Debian package
installs had the correct state set to ensure packages were upgraded when
the "upgrade_ceph_packages" var was set to true.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
--net=host was hardcoded in the startup line so even though
mon_docker_net_host was set to False the net option would always be
activated.
mon_docker_net_host is set to True by default so this commit does not
change the behaviour.
Signed-off-by: Sébastien Han <seb@redhat.com>
Depending on your setup, ceph-mgr might get restarted multiple times.
When this is done to fast, systemd will prevent further restarts because of
configured limits in the ceph-mgr systemd unit file.
Resetting the failure count will prevent this problem. The reset is done before
the restart so in case of a real problem during the restart it still fails.
Fixes: #2768
Signed-off-by: Christian Zunker <christian.zunker@codecentric.cloud>
Currently we expect that if configure_firewall is set to True to have
firewalld enabled and running. Let's enforce that.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1589146
Signed-off-by: Sébastien Han <seb@redhat.com>
As discussed with the cores, the current limits are too low and should
be bumped to higher value.
So now by default monitors get 3GB and OSDs get 5GB.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1591876
Signed-off-by: Sébastien Han <seb@redhat.com>
The 'dummy' container is created only on first client node, it means we
must seek to destroy this container only on this node, otherwise this
can cause failure like following :
```
fatal: [192.168.24.8]: FAILED! => {"changed": false, "cmd": ["docker", "rm",
"-f", "ceph-create-keys"], "delta": "0:00:00.023692", "end": "2018-06-12
20:56:07.261278", "msg": "non-zero return code", "rc": 1, "start":
"2018-06-12 20:56:07.237586", "stderr": "Error response from daemon: No such
container: ceph-create-keys", "stderr_lines": ["Error response from daemon: No
such container: ceph-create-keys"], "stdout": "", "stdout_lines": []}
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1590746
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Prior to this patch if you were running on a Red Hat system,
ceph-ansible would try to configure firewalld for you without the
operators's consent.
Now you can enable or disable the fw configuration by setting
configure_firewall to either true or false.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1589146
Signed-off-by: Sébastien Han <seb@redhat.com>
The current secure cluster play runs with all the monitors. The rerun
of this task is unnecessary and can be skipped.
Fixes: #2737
Signed-off-by: Vishal Kanaujia <vishal.kanaujia@flipkart.com>
combining `run_once: true` with `inventory_hostname ==
groups.get(client_group_name) | first` might cause bug when the only
node being run is not the first in the group.
In a deployment with a single client node it might cause issue because
sometimes keyring won't be created since the task could be definitively
skipped.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1588093
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Let's try to avoid using dashes as testinfra needs to be able to read
the groups.
Typically, with iscsi-gws we can't add a marker for these iscsi nodes,
using an underscore fixes the issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
We now have the ability to deploy a containerized version of ceph-iscsi.
The result is similar to the non-containerized version, you simply have
3 containers running for the following services:
* rbd-target-api
* rbd-target-gw
* tcmu-runner
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1508144
Signed-off-by: Sébastien Han <seb@redhat.com>
Potential error if someone doesnt pass the mode in `keys` dict for
client nodes:
```
fatal: [client2]: FAILED! => {}
MSG:
The task includes an option with an undefined variable. The error was: 'dict object' has no attribute 'mode'
The error appears to have been in '/home/guits/ceph-ansible/roles/ceph-client/tasks/create_users_keys.yml': line 117, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- name: get client cephx keys
^ here
exception type: <class 'ansible.errors.AnsibleUndefinedVariable'>
exception: 'dict object' has no attribute 'mode'
```
adding a default value will avoid the deployment failing for this.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Functional tests are broken when testing against 'dev' release (ceph).
Adding a dummy value here will make it possible to run ceph-ansible CI
against dev ceph release.
Typical error:
```
> if request.node.get_marker("from_luminous") and ceph_release_num[ceph_stable_release] < ceph_release_num['luminous']:
E KeyError: 'dev'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fd1487d93f21b609a637053f5b33cd2a4e408d00)
We need to do this because on dev or rhcs installs ceph_stable_release
is not mandatory and the firewall check tasks have a task that is
conditional based off the installed version of ceph. If we perform those
checks after package install then they will not fail on dev or rhcs
installs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
the `docker_exec_cmd` fact set in client role when there is no monitor
in inventory is wrong, `ceph-client-{{ hostname }}` is never created so
it will fail anyway.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When configuring openstack, the created keyrings aren't copied over to
all monitors nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1588093
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Refact of 8704144e31
There is no need to have duplicated tasks for this. The rgw pools
creation should be delegated on a monitor node se we don't have to care
if the admin keyring is present on rgw node.
By the way, only one task is needed to create the pools, we just need to
use the `docker_exec_cmd` fact already defined in `ceph-defaults` to
achieve it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1550281
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The initial keyring is generated from ansible server locally and the snippet works well for both v2 and v3 of python.
I don't see any reason why we should explicitly invoke`python2` instead of just `python`.
In some setups, `python2` is not symlinked to `python`; while `python` and `python3` refer to v2 and v3 respectively.
Signed-off-by: Ha Phan <thanhha.work@gmail.com>
Prior to this commit the firewall tasks were not opening the ceph-mgr
ports. This would lead to unclean configuration since the ceph-mgr
daemons can not connect to the OSDs.
Thi commit opens the right ports on the ceph-mgr nodes to talk with the
OSDs.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1526400
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph command has to be executed from one of the monitor containers
if not admin copy present in RGWs. Task has to be delegated then.
Adds test to check proper RGW pool creation for Docker container scenarios.
Signed-off-by: Jorge Tudela <jtudelag@redhat.com>
Since the openstack_config.yml has been moved to `ceph-osd` we must move
this `set_fact` in ceph-osd otherwise the tasks in
`openstack_config.yml` using `openstack_keys` will actually use the
defaults value from `ceph-defaults`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1585139
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The first 14.x tag has been cut so this needs to be added so that
version detection will still work on the master branch of ceph.
Fixes: https://github.com/ceph/ceph-ansible/issues/2671
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This is a follow up on #2628.
Even with the openstack pools creation moved later in the playbook,
there is still an issue because OSDs are not all UP when trying to
create pools.
Adding a task which checks for all OSDs to be UP with a `retries/until`
condition should definitively fix this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When playing ceph-mds role, mon nodes have set a fact with the default
pg num for osd pools, we can simply default to this value for cephfs
pools (`cephfs_pools` variable).
At the moment the variable definition for `cephfs_pools` looks like:
```
cephfs_pools:
- { name: "{{ cephfs_data }}", pgs: "" }
- { name: "{{ cephfs_metadata }}", pgs: "" }
```
and we have a task in `ceph-validate` to ensure `pgs` has been set to a
valid value.
We could simply avoid this check by setting the default value of `pgs`
to `hostvars[groups[mon_group_name][0]]['osd_pool_default_pg_num']` and
let to users the possibility to override this value.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1581164
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
in `ceph-osd` there is no need to set `docker_exec_cmd` since the only
place where this fact is used is in `openstack_config.yml` which
delegate all docker command to a monitor node. It means we need the
`docker_exec_cmd` fact that has been set referring to `ceph-mon-*`
containers, this fact is already set earlier in `ceph-defaults`.
By the way, when collocating an OSD with a MON it fails because the container
`ceph-osd-{{ ansible_hostname }}` doesn't exist.
Removing this task will allow to collocate an OSD with a MON.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1584179
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When collocating mds on monitor node, the cephpfs will fail
because `docker_exec_cmd` is reset to `ceph-mds-monXX` which is
incorrect because we need to delegate the task on `ceph-mon-monXX`.
In addition, it wouldn't have worked since `ceph-mds-monXX` container
isn't started yet.
Moving the task earlier in the `ceph-mds` role will fix this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
You can now use RGW_ZONE and RGW_ZONEGROUP on each rgw host from your
inventory and assign them a value. Once the rgw container starts it'll
pick the info and add itself to the right zone.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1551637
Signed-off-by: Sébastien Han <seb@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move cephfs pools creation in `ceph-mds` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move openstack pools creation at the end of `ceph-osd` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The NSS PKI database is needed only if radosgw_keystone_ssl
is explicitly set to true, otherwise the SSL integration is
not enabled.
It is worth noting that the PKI support was removed from Keystone
starting from the Ocata release, so some code paths should be
changed anyway.
Also, remove radosgw_keystone, which is not useful anymore.
This variable was used until fcba2c801a.
Now profiles drives the setting of rgw keystone *.
Signed-off-by: Luigi Toscano <ltoscano@redhat.com>
The LVM lvcreate fails if the disk already has a GPT header.
We create GPT header regardless of OSD scenario. The fix is to
skip header creation for lvm scenario.
fixes: https://github.com/ceph/ceph-ansible/issues/2592
Signed-off-by: Vishal Kanaujia <vishal.kanaujia@flipkart.com>
During a rolling update, OSDs are restarted twice currently. Once, by the
handler in roles/ceph-defaults/handlers/main.yml and a second time by tasks
in the rolling_update playbook. This change turns off restarts by the handler.
Further, the restart initiated by the rolling_update playbook is more
efficient as it restarts all the OSDs on a host as one operation and waits
for them to rejoin the cluster. The restart task in the handler restarts one
OSD at a time and waits for it to join the cluster.
A dev or rhcs install does not require ceph_stable_release to be set and
instead generates that by looking at the installed ceph-version.
However, at this point in the playbook ceph may not have been installed
yet and ceph-common has not be run.
Fixes: https://github.com/ceph/ceph-ansible/issues/2618
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Dimitri Savineau
fpantano
Guillaume Abrioux
Rishabh Dave
L3D
guihecheng
Boris Ranto
Bruceforce
Kevin Coakley
Gaudenz Steinlin
Kyle Bader
Radu Toader
Andrew Schoen
Sébastien Han
Matthew Vernon
François Lafont
Ali Maredia
wumingqiao
VasishtaShastry
ToprHarley
Patrick Donnelly
David Waiting
Leah Neukirchen
Patrick C. F. Ernzer
John Fulton
Ramana Raja
Zack Cerza
Bruceforce
Kai Wembacher
jtudelag
Noah Watkins
Christian Berendt
Neha Ojha
Mike Christie
Jason Dillaman
Alfredo Deza
Andy McCrae
Nan Li
Benjamin Cherian
Giulio Fidente
John Spray
Tom Barron
Markos Chandras
Dardo D Kleiner
Graeme Gillies
Artur Fijalkowski
Shilpa Jagannath
Vasu Kulkarni
George Shuklin
Ha Phan
Michel Rode
Christian Zunker
Konstantin Shalygin
Vishal Kanaujia
Luigi Toscano
Subhachandra Chandra