Commit Graph

2580 Commits (675087d01c3455f65a0df587cf5f5efba18527ff)
 

Author SHA1 Message Date
Guillaume Abrioux 675087d01c Doc: Add a note to clarify how to setup network
Explain how to setup networking in ceph-ansible by adding a note in
README.md.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-07-04 10:57:27 +02:00
Guillaume Abrioux 2a52d5b555 Tests: update tests according to ipv6 support
Since ceph.conf.j2 has been updated to add ipv6 support, the different
variables in many scenarios need to be updated.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-07-04 10:57:27 +02:00
Guillaume Abrioux 88df105d0b Common: Add ipv6 support
e8187f6 does not fix the ipv6 as expected since `ansible_default_*` are
filled with the IP address carried by the network interface used by the
default gateway route. By the way, it assumes that the MON_IP address will
be this IP address which is not always the case.

We need to keep using the previous fact but add some intelligence in the
template to determine how to retrieve the ipv4|ipv6 address since the path
to the fact in `hostvars` is not the same according to ipv4 vs ipv6 case.

Fix: 1569

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-07-04 10:57:26 +02:00
Sébastien Han 15b81bd255 Merge pull request #1633 from fullerdj/wip-djf-osd-seatbelt
ansible: fail if user selects OSD auto detection and raw devices are …
2017-06-30 10:58:41 +02:00
Douglas Fuller 6915dfcf81 ansible: fail if user selects OSD auto detection and raw devices are mounted
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
2017-06-29 17:02:17 +00:00
Sébastien Han 7ef908a4d9 Merge pull request #1629 from ceph/fix-openstack-key
mon: fix openstack key creation
2017-06-27 14:58:36 +02:00
Sébastien Han d6ba1d1d4e mon: fix openstack key creation
Somehow the shell module will return an error if the command line is not
next to it.
Plus fixed the import with the right path.

Signed-off-by: Sébastien Han <seb@redhat.com>
2017-06-27 11:47:02 +02:00
Sébastien Han 6ec2c51077 Merge pull request #1626 from ceph/fix_followup
Fix followup
2017-06-26 18:07:06 +02:00
Guillaume Abrioux 3dfeffab43 Fix followup on refact code (1469)
In addition to 7bb04a5, these lines are no longer needed and can even
cause playbook failures.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-06-26 15:53:41 +02:00
Sébastien Han 0c58257004 Merge pull request #1621 from ceph/openstack-key
mon: rework openstack keys creation
2017-06-26 14:39:05 +02:00
Sébastien Han 010897d1a5 Merge pull request #1624 from ceph/chose-ceph-config-location
Choose ceph config location
2017-06-26 14:38:54 +02:00
Sébastien Han 670d7a2495 mon: rework openstack keys creation
We now allow a user to pass a key secret.

Fixes: https://github.com/ceph/ceph-ansible/issues/1617
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-06-26 13:39:22 +02:00
Sébastien Han 0c21fb3f66 docker: ability to change ceph config directory
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-06-26 13:21:56 +02:00
Sébastien Han 7bb04a5970 docker: refactor followup
Followup on https://github.com/ceph/ceph-ansible/pull/1469 where we
merged most of the container code from roles/ceph-*/task/docker/*.yml
into roles/ceph-docker-common/tasks/

It seems that we forgot to remove the original files.

Signed-off-by: Sébastien Han <seb@redhat.com>
2017-06-26 13:21:36 +02:00
Sébastien Han e20001e242 Merge pull request #1620 from ceph/fix_bashism
Make the new check PGs working with /bin/sh
2017-06-23 14:57:42 +02:00
Andrew Schoen 872d1008d3 Merge pull request #1616 from ceph/disable-retry-file
ansible: disable retry files
2017-06-22 12:44:34 -05:00
Guillaume Abrioux 73141118d0 Make the new check PGs working with /bin/sh
The new test in the checks PGs are no longer working on distributions
where /bin/sh isn't linked to /bin/bash.

Fix: #1619
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-06-22 17:59:38 +02:00
Sébastien Han 955783d5a7 ansible: disable retry files
Closes: https://github.com/ceph/ceph-ansible/issues/1611

Signed-off-by: Sébastien Han <seb@redhat.com>
2017-06-22 15:56:41 +02:00
Sébastien Han cc7f9e874a Merge pull request #1613 from ceph/wip-takeover
Fixes to take-over-existing-cluster playbook
2017-06-21 16:06:09 +02:00
David Galloway 127b5ad9b4 infra: Create a backup of ceph.conf when taking over existing cluster
Signed-off-by: David Galloway <dgallowa@redhat.com>
2017-06-21 09:53:09 -04:00
David Galloway 40ed2d7be6 infra: Fix ceph.conf creation when taking over existing cluster
Fixes bug introduced in https://github.com/ceph/ceph-ansible/pull/1330

The "stat ceph.conf" task was basically using the stat module on a
string instead of the ceph.conf filename.  This caused the "generate
ceph configuration file" task to fail.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1463382

Signed-off-by: David Galloway <dgallowa@redhat.com>
2017-06-21 09:52:01 -04:00
Sébastien Han 79cac8043f Merge pull request #1612 from fultonj/add_openstack_metrics_pool
Add OpenStack metrics pool
2017-06-20 10:53:16 +02:00
John Fulton 9619ef33d0 Add OpenStack metrics pool
OpenStack's Gnocchi service expects to have a pool called "metrics".
This change addess "metrics" to the list of `openstack_pools` and
creates a corresponding key. It is only run if the user sets
`openstack_config: false`.
2017-06-19 14:25:59 -04:00
Sébastien Han 62192df644 Merge pull request #1595 from czunker/restart_all_osds
Restart all OSDs and do not stop after the first one.
2017-06-16 11:15:47 +02:00
Sébastien Han 294f35be27 Merge pull request #1609 from ceph/quick_clean
Remove duplicate entry in a test Vagrantfile
2017-06-15 16:57:09 +02:00
Guillaume Abrioux 35ad0e1c11 Remove duplicate entry in test Vagrantfile
remove some leftover since code has been refactored

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-06-15 16:42:58 +02:00
Christian Zunker bf8347e149 Restart all OSDs and do not stop after the first one.
The current handler only restarts one OSD on each OSD server. After
the first one the handler stops, not matter what results the checks had.

Co-Authored-By: Gaudenz Steinlin (@gaudenz)
2017-06-14 09:38:07 +00:00
Sébastien Han fccb07d39c Merge pull request #1607 from SoneraCloud/bluestore-acivation-fix
Bluestore: Omit "osd mkfs type" etc from ceph.conf
2017-06-14 11:36:35 +02:00
Peter Jenkins 804b0eef24 Bluestore: Omit "osd mkfs type" etc from ceph.conf
Remove "osd mkfs type" and the other pre-Bluestore parameters from the
generated ceph.conf so that disk activation on OSDs will work. The
current default xfs config results in a failed deployment and
incorrect partition metadata.
2017-06-14 10:44:13 +03:00
Sébastien Han 1b9e2e3021 Merge pull request #1599 from ceph/bz-1458024
tests: adds a test for rolling updates of containerized clusters
2017-06-13 18:00:06 +02:00
Andrew Schoen a440c2b3fe Merge pull request #1598 from ceph/test-rbd-pool
ceph-mon: fix get rbd size hanging
2017-06-13 10:04:57 -05:00
Andrew Schoen e2104acb62 rolling_update: set health_mon_check_delay to 15
The old value of 10 did not give enough time for a containerized mon to
pass the health check.

Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-06-13 08:56:44 -05:00
Andrew Schoen a9867e22fb tests: add PG config to the docker_cluster scenario
This is so we'll pass the PG check when performing a rolling update.

Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-06-13 08:56:43 -05:00
Andrew Schoen d15e464b81 tests: adds *-update_docker_cluster testing scenarios
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-06-13 08:56:43 -05:00
Sébastien Han 8b4624fa4c Merge pull request #1604 from ceph/rewrite_pgs_clean_tasks
rewrite check pgs clean tasks
2017-06-13 13:41:42 +02:00
Guillaume Abrioux 5af9bb432c rewrite check pgs clean tasks
Avoid screen scrapping by rewriting `waiting for clean pgs` tasks like it is
done in 304de48.

Use the json output returned by `ceph -s` instead

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-06-13 09:48:56 +02:00
Sébastien Han f5c2d3de9c Merge pull request #1573 from duritong/master-control_path-port
keep port as part of the control path
2017-06-12 15:05:11 +02:00
Sébastien Han 497924795d ceph-mon: fix get rbd size hanging
For newly created cluster the command: ceph --cluster {{ cluster }} osd
pool get rbd size does not respond properly.
We only want to check if the rbd pool exists, so we know use an ls |
grep approach.

Closes: https://github.com/ceph/ceph-ansible/issues/1547
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-06-12 14:39:39 +02:00
Alfredo Deza 93fc892978 Merge pull request #1584 from ceph/rewrite_check_pgs
Common: Rewrite check_pgs
2017-06-12 07:52:29 -04:00
Guillaume Abrioux 304de4833f Common: Rewrite check_pgs
Rewrite the check_pgs by using json parsing instead of complex regexp to
parse the `ceph -s` output.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-06-12 10:59:16 +02:00
Andrew Schoen a6fd955d3c Merge pull request #1590 from ceph/fix_ceph_docker_on_openstack
Common: Add a default for ceph_docker_on_openstack
2017-06-07 08:50:21 -05:00
Andrew Schoen 040b5c4b7f Merge pull request #1589 from ceph/bz-1454945
remove ceph-iscsi-gw play from site.yml.sample
2017-06-06 10:17:44 -05:00
Guillaume Abrioux a09ce92d51 Common: Add a default for ceph_docker_on_openstack
Add a default value for `ceph_docker_on_openstack` to avoid a
conditional check error for the task `pause after docker install before starting` in
`roles/ceph-docker-common/tasks/pre_requisites/prerequisites.yml`

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-06-06 16:49:04 +02:00
Andrew Schoen dd193df4b9 remove ceph-iscsi-gw play from site.yml.sample
We ship ceph-iscsi-gw in a separate repo downstream and do not package
it with ceph-ansible. Including the play for ceph-iscsi-gw in
site.yml.sample makes the playbook fail when using the downstream
packages.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1454945

Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-06-06 09:04:58 -05:00
Andrew Schoen b7f3be6c35 Merge pull request #1586 from ceph/rpm-strip-iscsi
rpm: do not package iscsi files
2017-06-05 13:46:41 -05:00
Gregory Meno 634bc588c2 Merge pull request #1587 from ceph/bz-1451786
ceph-mon: fix support for ipv6 on containerized mons
2017-06-05 11:14:49 -07:00
Andrew Schoen e8187f6a0f ceph-mon: fix support for ipv6 on containerized mons
The fact ['ansible_$interface']['ipv4'] is a dictionary where
['ansible_$interface']['ipv6'] is a list. If we use
ansible_default_ipv6|ipv4 is is always a dictionary which allows us to
get the ipv6 and ipv4 address without adding more complexity to the
template.

Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-06-05 10:51:47 -05:00
Ken Dreyer 2cfb3677d8 rpm: do not package iscsi files
Currently we cannot install the ceph-iscsi-ansible RPM on a node where
the ceph-ansible RPM is already installed.

ceph-iscsi-ansible should install on top of the ceph-ansible environment
without issues.
2017-06-05 09:19:48 -06:00
Andrew Schoen 28c724d5c6 Merge pull request #1582 from ceph/purge-docker-fix
purge-docker-cluster: include ceph_docker_registry
2017-06-05 09:31:53 -05:00
Andrew Schoen 59992c54cc purge-docker-cluster: include ceph_docker_registry
We need to include ceph_docker_registry when removing containers/images
because if we don't it will assume docker.io which is not always where
the image originated from, causing the playbook to fail.

Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2017-06-02 09:49:17 -05:00