It restricts access to the iSCSI API.
It can be left empty if the API isn't going to be access from outside the
gateway node
Even though this seems to be a limited use case, it's better to leave it
empty by default than having a meaningless default value.
We could make this variable mandatory but that would be a breaking
change. Let's just add a logic in the template in order to set this
variable in the configuration file only if it was specified by users.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1994930
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Dimitri Savineau <dsavinea@redhat.com>
This adds ceph-*.target systemd unit files support for containerized
deployments.
This also fixes a regression introduced by PR #6719 (rgw and nfs systemd
units not getting purged)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1962748
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using a vagrant command from the root directory of the repo, it
throws an error if no 'vagrant_variables.yml' file is present.
```
Message: Errno::ENOENT: No such file or directory @ rb_sysopen - /home/guits/workspaces/ceph-ansible/vagrant_variables.yml
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since [1] multiple ceph dashboard commands have been removed and this is
breaking the current ceph-ansible dashboard with RGW automation.
This removes the following dashboard rgw commands:
- ceph dashboard set-rgw-api-access-key
- ceph dashboard set-rgw-api-secret-key
- ceph dashboard set-rgw-api-host
- ceph dashboard set-rgw-api-port
- ceph dashboard set-rgw-api-scheme
Which are replaced by `ceph dashboard set-rgw-credentials`
The RGW user creation task is also removed.
Finally moving the delegate_to statement from the rgw tasks at the block
level.
[1] https://github.com/ceph/ceph/pull/42252
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using ceph-volume lvm create/prepare/batch then the keyring of each
OSD created is displayed in the output.
Let's replace those by some '*' chars.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
With OpenSSL version prior 1.1.1 (like CentOS 7 with 1.0.2k), the -addext
doesn't exist.
As a solution, this uses the default openssl.cnf configuration file as a
template and add the subjectAltName in the v3_ca section. This temp openssl
configuration file is removed after the TLS certificate creation.
This patch also move the run_once statement at the block level.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1978869
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the current way the variable is built results in:
```
2021-08-03 04:18:23,020 - ceph.ceph - INFO - ok: [ceph-sangadi-4x-indpt6-node1-installer] => changed=false
ansible_facts:
subj_alt_names: |-
subjectAltName=ceph-sangadi-4x-indpt6-node1-installer/subjectAltName=10.0.210.223/subjectAltName=ceph-sangadi-4x-indpt6-node1-installersubjectAltName=ceph-sangadi-4x-indpt6-node2/subjectAltName=10.0.210.252/subjectAltName=ceph-sangadi-4x-indpt6-node2/
```
which is incorrect.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1978869
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The balancer status is registered during the cephadm-adopt, rolling_update
and swith2container playbooks. But it is also used in the ceph-handler role
which is included in those playbooks too.
Even if the ceph-handler tasks are skipped for rolling_update and
switch2container, the balancer_status variable is erased with the skip task
result.
play1:
register: balancer_status
play2:
register: balancer_status <-- skipped
play3:
when: (balancer_status.stdout | from_json)['active'] | bool
This leads to issue like:
The conditional check '(balancer_status.stdout | from_json)['active'] | bool'
failed. The error was: Unexpected templating type error occurred on
({% if (balancer_status.stdout | from_json)['active'] | bool %} True
{% else %} False {% endif %}): expected string or buffer.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1982054
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
sufficient for the default value (512) of rgw thread pool size.
But if its value is increased near to the pids-limit value,
it does not leave place for the other processes to spawn and run within
the container and the container crashes.
pids-limit set to unlimited regardless of the container engine.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1987041
Signed-off-by: Teoman ONAY <tonay@redhat.com>
radosgw_civetweb_xxx variables are legacy variables and users should
have switched to radosgw_frontend_xxx variables instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph osd pool ls detail command is a subset of the ceph osd dump
command.
$ ceph osd dump --format json|wc -c
10117
$ ceph osd pool ls detail --format json|wc -c
4740
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When the ceph dashboard user creation fails then the issue is hidden
as we don't check the return code and don't print the error message
in the module output.
This ends up with a failure on the ceph dashboard set roles command saying
that the user doesn't exist.
By failing on the user creation, we will have an explicit explaination of
the issue (like weak password).
Closes: #6197
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
eec3878 introduced a regression for upgrade scenarios where there's no
monitor nodes at all (like ganesha standalone, external clients, etc..)
TASK [get the ceph release being deployed] ************************************
task path: infrastructure-playbooks/rolling_update.yml:121
Thursday 29 July 2021 15:55:29 +0000 (0:00:00.484) 0:00:15.802 *********
fatal: [client0]: FAILED! =>
msg: '''dict object'' has no attribute ''mons'''
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In the `set osd flags` block, run the Ceph commands that gather information
from the cluster (and don't make any changes to it) even when running in check
mode.
This allows the tasks that depend on the variables set by those tasks to
succeed in check mode.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Run the Ceph commands that only gather information (without making any changes
to the cluster) when running Ansible in check mode.
This allows the tasks that depend on the variables set by those tasks to
succeed in check mode.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The radosgw-sync-overview and rbd-details grafana dashboars were missing
from the list.
Closes: #6758
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Check early which Ceph release is going to be deployed and fail if it
doesn't correspond to the ceph-ansible version being used.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1978643
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using self-signed/untrusted CA certificates, alertmanager displays
an error in logs. With this commit this should make those messages
disappear.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1936299
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When the rgw_multisite_proto variable is set to https then we shoudn't use
the IP address in the zone endpoints list but the node FQDN to match the
TLS certificate CN.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1965504
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds a task that zaps by osd id so we can support the scenario
where osds were deployed with `osd_auto_discovery` is true.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1876860
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This refactor merges the two playbooks so we only have to maintain 1
playbook.
(Symlink the old purge-container-cluster.yml playbook for backward
compatibility).
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Those variables are useless given this is not possible to override them.
Let's replace them with the hardcoded name instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
1303611 introduced tasks for disabling the pg_autoscaler on pools and
the balancer but thoses tasks are already executed on the first monitor
node so we don't need to add the run_once statement.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using python 2 and the task with a loop is skipped then it generates
an error.
Unexpected templating type error occurred on
({{ (pool_list.stdout | from_json)['pools'] }}): expected string or buffer
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The PG autoscaler can disrupt the PG checks so the idea here is to
disable it and re-enable it back after the restart is done.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Populating the ceph_mgr_modules list in the mgr_modules doesn't make sense
since that file is only executed if the list isn't empty or we're using the
dashboard.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We already have config override variables for existing block (like
ganesha_ceph_export_overrides, ganesha_log_overrides, etc...) or a
global one (ganesha_conf_overrides) but redefining the NFS_CORE_PARAM
block in that variable will erase all previous values (currently only
Bind_Addr).
ganesha_core_param_overrides: |
Enable_UDP = false;
NFS_Port = 2050;
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1941775
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit reindents the playbook.
Also improve readability by adding an extra line between plays.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If one a the monitor is out of the quorum then nothing prevents the upgrade
playbook to run.
We only check if we have at least three monitor nodes but we should also
check if those monitor nodes are correctly present in the quorum.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1952571
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
After an upgrade, the presence of straw buckets will produce the
following warning (HEALTH_WARN):
```
crush map has legacy tunables (require firefly, min is hammer)
```
because straw bucket is a firefly feature it needs to be converted to
straw2.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967964
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying dashboard with ssl certificates generated by
ceph-ansible, we enforce the CN to 'ceph-dashboard' which can makes
application such alertmanager complain like following:
`err="Post https://mgr0:8443/api/prometheus_receiver: x509: certificate is valid for ceph-dashboard, not mgr0" context_err="context deadline exceeded"`
The idea here is to add alternative names matching all mgr/mon instances
in the certificate so this error won't appear in logs.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1978869
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The dashboard/monitoring stack can be deployed via the dashboard_enabled
variable. But there's nothing similar if we can to remove that part only
and keep the ceph cluster up and running.
The current purge playbooks remove everything.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786691
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This introduces a new variable `dashboard_network` in order to support
deploying the dashboard on a different subnet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1927574
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Guillaume Abrioux
Dimitri Savineau
Seena Fallah
VasishtaShastry
Teoman ONAY
Benoît Knecht