This commit moves the dummy container creation task right before the
cephx keys creation task so it can't be run out of time.
Also, this commit makes the dummy container running for ever.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1828105
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit is the first of a serie in order to describe all day-2 operations
that are possible via ceph-ansible using a set of playbook provided in
`infrastructure-playbooks` directory.
Fixes: #5061
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7e800303e9)
We were not testing the right ansible_distribution fact value for RHEL
distribution.
This commit also updates the minial RHEL version supported by RHCS.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5de74fe512)
There's no need to have two plays anymore since we now set/unset osd
flags in `ceph-osd` role.
Also, this commit makes the role `ceph-facts` to be called after
`ceph-defaults`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit makes this playbook gathering facts from all other nodes but
clients.
When collocating OSDs on other nodes it can fail like following:
```
fatal: [vm252-11]: FAILED! => {
"msg": "'ansible.vars.hostvars.HostVarsVars object' has no attribute 'ansible_hostname'"
}
```
In that case, a fact from a RGW node is called when rendering the
`ceph.conf.j2` but it fails because facts are gathered only from mon and
osd nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1806765
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this commit fixes a bug when using `add-osd.yml` playbook.
`noup` flag is set early but it never got unset before the "wait for pgs
clean" check, so the playbook always fails because OSDs aren't never
seen UP.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1816023
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Fetch the key when it is present in the cluster but not on the node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ccfa249919)
553584cbd0 introduced a regression when no
secret is passed, it overwrites the secret each time the task is run.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 003defec03)
With this change, the state `present` is enough to update a keyring.
If the keyring already exist, it will be updated if caps or secret
passed to the module are different.
If the keyring doen't exist, it will be created.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1808367
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 553584cbd0)
Since 306ce82 we explicitly fail when there's no mgr node preent in the
inventory.
fatal: [mon0]: FAILED! => {
"changed": false
}
MSG:
Please add a mgr host to your inventory.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Creating crush rules even with no crush hierarchy configuration is a
valid scenario so we shouldn't be bound to the first task result (which
configure crush hierarchy) to be able to add new crush rules.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1816989
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5b0476385c)
just like site.yml and rolling_update, let's exclude clients node from
the fact gathering.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 332c39376b)
(cherry picked from commit 5c3ba0787c)
This commit excludes client nodes from facts gathering, they are not
needed and can speed up this task.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 865d2eac9b)
Client configuration with --limit fails without this patch
because certain tasks are only done to the first host in the
_filtered_clients list and it's likely that first host will
not be included in what's sepcified with --limit. To fix this
the _filtered_clients list should be built from all clients
in the inventory that are also in the running play.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1798781
Signed-off-by: John Fulton <fulton@redhat.com>
(cherry picked from commit e4bf4857f5)
This is no longer true, let's remove this comment given that this option
is not ignored in containerized deployments.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e551b5ba1a)
Those tasks aren't needed in docker-common since the introduction of
`ceph-infra` role. They are duplicated tasks.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1810376
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cd0195c562)
This commit modifies the way we test add-osd scenario given that the
playbook add-osd.yml is broken at the moment.
As a workaround we can use main playbook with `--limit` to achieve this
operation.
Note: This commit is intended to be reverted once we get a fix.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In 3c31b19ab3, I fixed the `customize pool
size` task by replacing `item.size` with `item.value.size`. However, I
missed the same issue in the `when` condition.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 3842aa1a30)
RadosGW pools can be created by setting
```yaml
rgw_create_pools:
.rgw.root:
pg_num: 512
size: 2
```
for instance. However, doing so would create pools of size
`osd_pool_default_size` regardless of the `size` value. This was due to
the fact that the Ansible task used
```
{{ item.size | default(osd_pool_default_size) }}
```
as the pool size value, but `item.size` is always undefined; the
correct variable is `item.value.size`.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 3c31b19ab3)
Since ed36a11 we move the crush rules creation code from the ceph-mon to
the ceph-osd role.
To keep the backward compatibility we kept the possibility to set the
crush variables on the mons side but we didn't move the default values.
As a result, when using crush_rule_config set to true and wanted to use
the default values for crush_rules then the crush rule ansible task
creation will fail.
"msg": "'ansible.vars.hostvars.HostVarsVars object' has no attribute
'crush_rules'"
This patch move the default crush variables from ceph-mon to ceph-osd
role but also use those default values when nothing is defined on the
mons side.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1798864
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 1fc6b33714)
We already stop the upgrade playbook (rolling_update.yml) if there's
no mgr node present so we should also do the same for initial
deployment.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1788644
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using ceph aliases with commands that require manual intervention
to stop then the command will keep running inside the container (like
using Ctrl+c).
For handling this, we should use the interactive session option (-it)
with the docker commands.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1797874
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
During a rolling update we will run the ceph iscsigw tasks that start
the daemons then run the configure_iscsi.yml tasks which can create
iscsi objects like targets, disks, clients, etc. The problem is that
once the daemons are started they will accept confifguration requests,
or may want to update the system themself. Those operations can then
conflict with the configure_iscsi.yml tasks that setup objects and we
can end up in crashes due to the kernel being in a unsupported state.
This could also happen during creation, but is less likely due to no
objects being setup yet, so there are no watchers or users accessing the
gws yet. The fix in this patch works for both update and initial setup.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1795806
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit 77f3b5d51b)
Add a script to retry several times to fire up VMs to avoid vagrant
failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 1ecb3a9352)
When no monitor group is present in the inventory, this task fails.
This affects only non-containerized deployments.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e7bc079405)
This commit allows ceph-ansible 3.2 to be run against ansible 2.7
However, note that running stable-3.2 against ansible 2.7 doesn't get
any testing upstream this might break the playbook, only ansible 2.6 is
officially supported.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1781635
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add new scenario 'all_in_one' in order to catch more collocated related
issues.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3e7dbb4b16)
These tasks should have been removed with backport #4756
Note:
This should have been backported from master but it's not possible
because of too many change between master and stable-3.2
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1740463
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The [rgw] section in the ceph.conf file or via the ceph_conf_overrides
variable doesn't exist and has no effect.
To apply overrides to all radosgw instances we should use either the
[global] or [client] sections.
Overrides per radosgw instance should still use the
[client.rgw.{instance-name}] section.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1794552
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2f07b85131)
To avoid confusion, let's change the default value from `0.0.0.0` to
`x.x.x.x`.
Users might think setting `0.0.0.0` will make the daemon binding on all
interfaces.
Fixes: #4827
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fc02fc98eb)
This is enabled in the group_vars/clients file but it's overrided in
extra vars by tox.
Let's do it like that for now.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit adds a playbook to be played before we run purge playbook,
it first creates an rbd image then map an rbd device on client0 so the
purge playbook will try to unmap it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit db77fbda15)
in containerized context, using the binary provided in atomic os won't
work because it's an old version provided by ceph-common based on
10.2.5.
Using a container could be an idea but for large cluster with hundreds
of client nodes, that would require to pull the image of each of them
just to unmap the rbd devices.
Let's use the sysfs method in order to avoid any issue related to ceph
version that is shipped on the host.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1766064
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3cfcc7a105)
There is no need to run these tasks n times from each monitor.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c878e99589)
1. set noout and nodeep-scrub flags,
2. upgrade each OSD node, one by one, wait for active+clean pgs
3. after all osd nodes are upgraded, unset flags
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Rachana Patel <racpatel@redhat.com>
(cherry picked from commit 548db78b95)
cf8c6a3 moves the 'wait for all osds' task from openstack_config to the
main tasks list.
But the openstack_config code was executed only on the last OSD node.
We don't need to do this check on all OSD node so we need to add set
run_once to true on that task.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5bd1cf40eb)
When creating crush rules with device class parameter we need to be sure
that all OSDs are up and running because the device class list is
is populated with this information.
This is now enable for all scenario not openstack_config only.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit cf8c6a3849)
When upgrading from jewel to luminous we can execute the crush rule tasks
only when the 'osd require-osd-release luminous' command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds device class support to crush rules when using the class key
in the rule dict via the create-replicated sub command.
If the class key isn't specified then we use the create-simple sub
command for backward compatibility.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1636508
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ef2cb99f73)
If we want to create crush rules with the create-replicated sub command
and device class then we need to have the OSD created before the crush
rules otherwise the device classes won't exist.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ed36a11eab)
When ceph_rbd_mirror_configure is set to true we need to ensure that
the required variables aren't empty.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1760553
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4a065cebd7)
The ceph lockbox partition (part number 5) used with non lvm scenarios
and in non containerized deployment don't have a valid PARTUUID.
The value is set to 00000000-0000-0000-0000-000000000000 for each OSD
devices.
$ blkid -t PARTLABEL="ceph lockbox" -o value -s PARTUUID
00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
When switching to containerized deployment we manually mount the lockbox
partition by using the PARTUUID.
Unfortunately because we have most of the time multiple OSD on the same
node we can't have the right symlink in /dev/disk/by-partuuid because it
will point to only one partition.
/dev/disk/by-partuuid/00000000-0000-0000-0000-000000000000 -> ../../sdb5
After the switch_to_containers playbook then only one OSD will restart
correctly and the other will try to access to the wrong device causing
error like 'xxxx is still in use'.
When deploying with containers and dmcrypt OSDs we force a PARTUUID
value during the ceph-disk prepare task.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1616159
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We need to explicitly enable the allow_dirfrags flag on cephfs pool
after upgrading to Luminous.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1776233
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Guillaume Abrioux
ianwatsonrh
Rishabh Dave
Dimitri Savineau
John Fulton
Benoît Knecht
Mike Christie