This commit modifies the way we test add-osd scenario given that the
playbook add-osd.yml is broken at the moment.
As a workaround we can use main playbook with `--limit` to achieve this
operation.
Note: This commit is intended to be reverted once we get a fix.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a script to retry several times to fire up VMs to avoid vagrant
failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 1ecb3a9352)
Add new scenario 'all_in_one' in order to catch more collocated related
issues.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3e7dbb4b16)
This is enabled in the group_vars/clients file but it's overrided in
extra vars by tox.
Let's do it like that for now.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit adds a playbook to be played before we run purge playbook,
it first creates an rbd image then map an rbd device on client0 so the
purge playbook will try to unmap it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit db77fbda15)
This commit introduce back testing against ceph-disk deployed osds.
In stable-3.2 which is the most common version used at customers
(downstream pov), a bunch of OSDs are still deployed using ceph-disk.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The secondary vagrant variables didn't have the grafana vm variable
set which create an vagrant error.
There was an error loading a Vagrantfile. The file being loaded
and the error message are shown below. This is usually caused by
an invalid or undefined variable.
This patch also changes the ssh-extra-args parameter to ssh-common-args
to get the same values for ssh/sftp/scp. Otherwise we can see warnings
from ansible and some tasks are failing.
[WARNING]: sftp transfer mechanism failed on [mon0]. Use ANSIBLE_DEBUG=1
to see detailed information
It also updates the ssh-common-args value for the rgw-multisite scenario
to reflect the ANSIBLE_SSH_ARGS environment variable value.
Finally changing the IP addresses due to the Vagrant refact done in the
commit 778c51a
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 010158ff84)
This commit reflects the recent changes in ceph/ceph-build#1406
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit bcaf8cedee)
The ooo-collocation scenario was still using an old container image and
doesn't match the requirement on latest stable-3.2 code. We need to use
at least the container image v3.2.5.
Also updating the OSD tests to reflect the changes introduced by the
commit bedc0ab because we don't have the OSD systemd unit script using
device name anymore.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Because we're using vagrant, a ssh config file will be created for
each nodes with options like user, host, port, identity, etc...
But via tox we're override ANSIBLE_SSH_ARGS to use this file. This
remove the default value set in ansible.cfg.
Also adding PreferredAuthentications=publickey because CentOS/RHEL
servers are configured with GSSAPIAuthenticationis enabled for ssh
server forcing the client to make a PTR DNS query.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 34f9d51178)
The current lvm_osds only tests filestore on one OSD node.
We also have bs_lvm_osds to test bluestore and encryption.
Let's use only one scenario to test filestore/bluestore and with or
without dmcrypt on four OSD nodes.
Also use validate_dmcrypt_bool_value instead of types.boolean on
dmcrypt validation via notario.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 52b9f3fb28)
It's usefull to have logs in debug mode enabled in order to have
more information for developpers.
Also reindent to json file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d25af1b872)
there's no need to test this on all scenarios.
testing idempotency on all_daemons should be enough and allow us to save
precious resources for the CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 136bfe096c)
On containerized CI jobs the playbook executed is purge-cluster.yml
but it should be set to purge-docker-cluster.yml
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit bd0869cd01)
As of testinfra 2.0.0, the binary name is `py.test`.
But let's pin the version to 1.19.0.
Indeed, migrating to 2.0.0 requires our current testing to be reworked a bit.
Since we don't have the bandwidth ATM for this, it's better to simply
keep testing with testinfra 1.19.0.
Note that I've replaced all `testinfra` occurences by `py.test` anyway.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b42250332a)
Since we deploy > purge > deploy the LVs are gone so we much recreate
them.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 656fbd2901)
- reintroduce `purge_cluster_container` and `purge_cluster_non_container`
on `stable-3.2`,
- remove all purge scenario based on ceph-disk,
- remove purge_lvm_osds_* scenarios.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Adding this rule on the hypervisor will allow cluster to talk to each
other.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 96ce8761ba)
we must apply this playbook before deploying the secondary cluster.
Otherwise, there will be a mismatch between the two deployed cluster.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3d8f4e6304)
Add a playbook that will upload a file on the master then try to get
info from the secondary node, this way we can check if the replication
is ok.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will setup 2 cluster with rgw multisite enabled.
First cluster will act as the 'master', the 2nd will be the secondary
one.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we are removing the ceph-disk test from the ci in master then
there is no need to have the functionnal tests in master anymore.
Signed-off-by: Sébastien Han <seb@redhat.com>
the line setting `ANSIBLE_CONFIG` obviously contains a typo introduced
by 1e283bf69b
`ANSIBLE_CONFIG` has to point to a path only (path to an ansible.cfg)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Adding testing scenarios for day-2-operation playbook.
Steps:
- deploys a cluster,
- run testinfra,
- test idempotency,
- add a new osd node,
- run testinfra
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of now, we should no longer support Jewel in ceph-ansible.
The latest ceph-ansible release supporting Jewel is `stable-3.1`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit does a couple of things:
* Avoid code duplication
* Clarify the code
* add more unit tests
* add myself to the author of the module
Signed-off-by: Sébastien Han <seb@redhat.com>
Using `UPDATE_*` environment variables here will make an upgrade of the
ceph release when running switch_to_containers scenario which is not
correct.
Eg:
If ceph luminous was first deployed, then we should switch to ceph
luminous containers, not to mimic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The copy module does in fact do variable interpolation so we do not need
to use the template module or keep a template in the source.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Using an explicitly named testing environment name allows us to have a
specific [testenv] block for this test. This greatly simplifies how it will
work as it doesn't really anything from the ceph cluster tests.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This adds the action 'batch' to the ceph-volume module so that we can
run the new 'ceph-volume lvm batch' subcommand. A functional test is
also included.
If devices is defind and osd_scenario is lvm then the 'ceph-volume lvm
batch' command will be used to create the OSDs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Let's create a dedicated environment for these scenarios, there is no
need to deploy everything.
By the way, doing so will save some times.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`test_rbd_mirror_is_up()` is failing on update scenarios because it
assumes the `ceph_stable_release` is still set to the value of the
original ceph release, it means it won't enter in the right part of the
condition and fails.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In addition to ceph/ceph-build#1082
Let's set the ansible version in each ceph-ansible branch's respective
requirements.txt.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since no latest-bis-jewel exists, it's using latest-bis which points to
ceph mimic. In our testing, using it for idempotency/handlers tests
means upgrading from jewel to mimic which is not what we want do.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Guillaume Abrioux
Dimitri Savineau
Sébastien Han
Ramana Raja
Andrew Schoen