This commit fixes the error [306]:
`[306] Shells that use pipes should set the pipefail option`
using `/bin/bash` as executable because Debian/Ubuntu systems use `dash`
by default which doesn't have the `-o pipefail`. (See:
https://github.com/ansible/ansible-lint/issues/497#issue-424623501)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 102edaeb61)
This commit makes it possible to parametrize the ceph directories modes.
So it changes hardocded mode for ceph related directories from 0755 to
customizable with `ceph_directories_mode` variable.
Closes: #2920
Signed-off-by: Artur Fijalkowski <artur.fijalkowski@ing.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 011270ca69)
On containerized deployment, the OSD entrypoint runs some ceph-volume
commands (lvm/simple scan and/or activate) which perform badly without
the ulimit option.
This option was added for all previous ceph-volume commands but not on
the ceph-osd container startup.
Also updating hard limit value to 4096 to reflect default baremetal
value.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9a4ac46d19)
just like `ceph_osd_pool_default_size`, a pool size might change after an
initial deployment. Having this condition prevents from customizing the
pool in that case.
This is not needed so let's remove it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 70cf2a5846)
let's use `until` instead of doing test in bash using python oneliner
also, use `command` instead of `shell`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 687087fd43)
in order to use the right binary name when using python cli in command
or shell module.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 13815ad3ca)
When creating OpenStack pools, we only check if the return code from
the pool list command isn't 0 (ie: if it doesn't exist). In that case,
the return code will be 2. That's why the next condition is rc != 0 for
the pool creation.
But in containerized deployment, the return code could be different if
there's a failure on the container engine command (like container not
running). In that case, the return code could but either 1 (docker) or
125 (podman) so we should fail at this point and not in the next tasks.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1732157
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d549fffdd2)
The ceph-volume lvm list command takes ages to complete when having
a lot of LV devices on containerized deployment.
For instance, with 25 OSDs on a node it takes 3 mins 44s to list the
OSD.
Adding the max open files limit to the container engine cli when
executing the ceph-volume command seems to improve a lot thee
execution time ~30s.
This was impacting the OSDs creation with ceph-volume (both filestore
and bluestore) when using multiple LV devices.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1702285
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit b987534881)
We already set the become flag to true at a play level in the site*
playbooks so we don't need to set it at a task level.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7c3640177b)
`parted_results` isn't used anymore in the playbook.
By the way, `parted` seems to cause issue because it changes the
ownership on devices:
```
root@osd0 ~]# ls -l /dev/sdc*
brw-rw----. 1 root disk 8, 32 Jun 11 08:53 /dev/sdc
brw-rw----. 1 ceph ceph 8, 33 Jun 11 08:53 /dev/sdc1
brw-rw----. 1 ceph ceph 8, 34 Jun 11 08:53 /dev/sdc2
[root@osd0 ~]# parted -s /dev/sdc print
Model: ATA QEMU HARDDISK (scsi)
Disk /dev/sdc: 53.7GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 1075MB 1074MB ceph block.db
2 1075MB 2149MB 1074MB ceph block.db
[root@osd0 ~]# #We can see ownerships have changed from ceph:ceph to root:disk:
[root@osd0 ~]# ls -l /dev/sdc*
brw-rw----. 1 root disk 8, 32 Jun 11 08:57 /dev/sdc
brw-rw----. 1 root disk 8, 33 Jun 11 08:57 /dev/sdc1
brw-rw----. 1 root disk 8, 34 Jun 11 08:57 /dev/sdc2
[root@osd0 ~]#
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit eece362b38)
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
(cherry picked from commit ab54fe20ec)
This commit renames the `docker_exec_cmd` variable to
`container_exec_cmd` so it's more generic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e74d80e72f)
Except for some corner case, it's not correct to access some other
node's copy of variable docker_exec_cmd. Therefore replace
"hostvars[groups[mon_group_name][0]]['docker_exec_cmd']" by
"docker_exec_cmd".
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 89748d579a)
Keywords requiring only one item shouldn't express it by creating a
list with single item.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 739a662c80)
Conflicts:
roles/ceph-mon/tasks/ceph_keys.yml
roles/ceph-validate/tasks/check_devices.yml
This will be removed in ansible 2.8 and breaks the playbook execution
with this release.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ae266c6f2b)
Otherwise the reader is forced to search for "when" when blocks are too
long.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit e0beaf123a)
Conflicts:
roles/ceph-config/tasks/main.yml
roles/ceph-container-common/tasks/pre_requisites/prerequisites.yml
roles/ceph-validate/tasks/check_devices.yml
When performing a rolling update do not try to create
any new osds with `ceph-volume lvm batch`. This is troublesome
because when upgrading to nautilus the devices list might contain
devices that are currently being used by ceph-disk and have GPT
headers on them, which will cause ceph-volume to fail when
trying to use such a device. Any devices originally created
by ceph-disk will need to be removed from the devices list
before any new osds can be created.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 5e3dfe5021)
these files aren't needed anymore since we only use lvm scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4f68462009)
As of stable-4.0, the only valid scenario is `lvm`.
Thus, this makes this variable useless.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4d35e9eeed)
ceph_disk_cli_options_facts.yml is not used anymore, let's remove it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4d5637fd8a)
We don't support the preparation of OSD with ceph-disk. ceph-volume is
only supported. However, the start operation of OSD is still supported.
So let's say you change a config option, the handlers will be able to
restart all the OSDs via their respective systemd unit files.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e2a5aa062e)
Since https://github.com/ceph/ceph/commit/77912c0 ceph-volume uses
stdout encoding based on LC_CTYPE and PYTHONIOENCODING environment
variables.
Thoses variables aren't set when using ansible.
Currently this commit breaks non containerized deployment on Ubuntu.
TASK [use ceph-volume to create bluestore osds] ********************
cmd:
- ceph-volume
- --cluster
- ceph
- lvm
- create
- --bluestore
- --data
- /dev/sdb
rc: 1
stderr: |-
Traceback (most recent call last):
(...)
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in
position 132: ordinal not in range(128)
Note that the task is failing on ansible side due to the stdout
decoding but the osd creation is successful.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7e5e4229b7)
This prevents the packaging from restarting services before we do need
to restart them in the rolling update sequence.
We want to handle services restart at rolling_update playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using osd_scenario lvm, we never check if the lvm2 package is
present on the host.
When using containerized deployment and docker on CentOS/RedHat this
package will be automatically installed as a dependency but not for
Ubuntu distribution.
OSD deployed via ceph-volume require the lvmetad.socket to be active
and running.
Resolves: #3728
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since all files in container image have moved to `/opt/ceph-container`
this check must look for new AND the old path so it's backward
compatible. Otherwise it could end up by templating an inconsistent
`ceph-osd-run.sh`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
With 3e32dce we can run OSD containers with numactl support.
When using numactl command in a containerized deployment we need to
be sure that the corresponding package is installed on the host.
The package installation is only executed when the
ceph_osd_numactl_opts variable isn't empty.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
After b8d580b and e9e5d5a we could have either item.min_size or
osd_pool_default_min_size using string instead of int causing the
condition to be true when it's false.
As a result, the task could try to set the pool min_size value to
0 which leads to:
Error EINVAL: pool min_size must be between 1 and 1
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
b8d580b3f4 introduced a bug when
`min_size` isn't set (default to 0).
Typical error:
```
Error EINVAL: pool min_size must be between 1 and 1
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The following lint issues have been resolved:
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-mon/tasks/ceph_keys.yml:2
[305] Use shell only when shell functionality is required
/home/travis/build/ceph/ceph-ansible/roles/ceph-osd/tasks/start_osds.yml:47
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:2
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:7
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:14
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:19
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:24
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
The "get osd ids" statement only registers the osd_ids_non_container variable. Running "ls /var/lib/ceph/osd/ | sed 's/.*-//'" should never produce a change on the system. Adding changed_when: false prevents irrelevant change messages from Ansible.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
introduce two new variables to make the check that 'wait for all osd to
be up' configurable.
It's possible that for some deployments, OSDs can take longer to be seen
as UP and IN.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1676763
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The existing task checks that the number of OSDs is equal to the number of up OSDs before continuing.
The problem is that if none of the OSDs have been discovered yet, the task will exit immediately and subsequent pool creation will fail (num_osds = 0, num_up_osds = 0).
This is related to Bugzilla 1578086.
In this change, we also check that at least one OSD is present. In our testing, this results in the task correctly waiting for all OSDs to come up before continuing.
Signed-off-by: David Waiting <david_waiting@comcast.com>
This task used to live in ceph-osd, but we need it defined here to that
ceph-config can use it when trying to determine the number of osds.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The code is now able (again) to start osds that where configured with
ceph-disk on a non-container scenario.
Closes: https://github.com/ceph/ceph-ansible/issues/3388
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 452069cb3a)
This commit unifies the container and non-container code, which in the
meantime gives use the ability to deploy N mon container at the same
time without having to serialized the deployment. This will drastically
reduces the time needed to bootstrap the cluster.
Note, this is only possible since Nautilus because the monitors are
bootstrap the initial keys on their own once they reach quorum. In the
Nautilus version of the ceph-container mon, we stopped generating the
keys 'manually' from inside the container, for more detail see: https://github.com/ceph/ceph-container/pull/1238
Signed-off-by: Sébastien Han <seb@redhat.com>
In order to be able to retrieve udev information, we must expose its
socket. As per, https://github.com/ceph/ceph/pull/25201 ceph-volume will
start consuming udev output.
Signed-off-by: Sébastien Han <seb@redhat.com>
Guillaume Abrioux
Artur Fijalkowski
Dimitri Savineau
L3D
Rishabh Dave
Andrew Schoen
Sébastien Han
Radu Toader
Kevin Coakley
David Waiting
John Fulton
Kai Wembacher
Noah Watkins