We don't need to use run_once on that task when having running monitors
otherwise the read task could be skip and the set task will fail.
The conditional check 'crush_rule_variable.rc == 0' failed. The error
was: error while evaluating conditional (crush_rule_variable.rc == 0):
'dict object' has no attribute 'rc'
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1898856
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit e150df789e)
This is a workaround to avoid error like following:
```
Error: error creating container storage: the container name "ceph-mgr-magna022" is already in use by "4a5f674e113f837a0cc561dea5d2cd55d16ca159a647b7794ab06c4c276ef701"
```
that doesn't seem to be 100% reproducible but it shows up after a
reboot. The only workaround we came up with at the moment is to run
`podman rm --storage <container>` before starting it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1887716
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5ba7824c55)
The osd_memory_target variable was only used if it was higher than the
calculated value based on the number of OSDs. This is changed to always
use the value if it is set in the configuration. This allows this value
to be intentionally set lower so that it does not have to be changed
when more OSDs are added later.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 4d1fdd2b05)
The `osd_pool_default_crush_rule` is set based on `crush_rule_variable`, which
is the output of a `grep` command.
However, two consecutive tasks can set that variable, and if the second task is
skipped, it still overwrites the `crush_rule_variable`, leading the
`osd_pool_default_crush_rule` to be set to `ceph_osd_pool_default_crush_rule`
instead of the output of the first task.
This commit ensures that the fact is set right after the `crush_rule_variable`
is assigned, before it can be overwritten.
Closes#5912
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit c5f7343a2f)
This sets the `dashboard_grafana_api_no_ssl_verify` default value
according to the length of `dashboard_crt` and `dashboard_key`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5cadfea42e)
If some OSDs are to be created and others already exist the calculation
only counted the to be created OSDs. This changes the calculation to
take all OSDs into account.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 15044da030)
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the rgw/rbdmirror services status, we're only using the
servicmap structure in the ceph status output.
To optimize this, we could use the ceph service dump command which contains
the same needed information.
This command returns less information and is slightly faster than the ceph
status command.
$ ceph status -f json | wc -c
2001
$ ceph service dump -f json | wc -c
1105
$ time ceph status -f json > /dev/null
real 0m0.557s
user 0m0.516s
sys 0m0.040s
$ time ceph service dump -f json > /dev/null
real 0m0.454s
user 0m0.434s
sys 0m0.020s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 3f9081931f)
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the quorum status, we're only using the quorum_names
structure in the ceph status output.
To optimize this, we could use the ceph quorum_status command which contains
the same needed information.
This command returns less information.
$ ceph status -f json | wc -c
2001
$ ceph quorum_status -f json | wc -c
957
$ time ceph status -f json > /dev/null
real 0m0.577s
user 0m0.538s
sys 0m0.029s
$ time ceph quorum_status -f json > /dev/null
real 0m0.544s
user 0m0.527s
sys 0m0.016s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 88f91d8c12)
Improve the checked way of the OSD created checking process.
This replaces the ceph status command by the ceph osd stat command.
The osdmap structure isn't needed anymore.
$ ceph status -f json | wc -c
2001
$ ceph osd stat -f json | wc -c
132
$ time ceph status -f json > /dev/null
real 0m0.563s
user 0m0.526s
sys 0m0.036s
$ time ceph osd stat -f json > /dev/null
real 0m0.457s
user 0m0.411s
sys 0m0.045s
Signed-off-by: wangxiaotong <wangxiaotong@fiberhome.com>
(cherry picked from commit b9cb0f12e9)
After rolling updates performed with
`infrastructure-playbooks/rolling_updates.yml`, files located in
`/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }}` had mode 0755 (including
the keyring), making them world-readable.
This commit separates the task that configured permissions recursively on
`/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }}` into two separate tasks:
1. Set the ownership and mode of the directory itself;
2. Recursively set ownership in the directory, but don't modify the mode.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 0d76826bbb)
Otherwise this task fails if no permission is set on the item.
Previously the code omited the mode parameter if it was not set, but
this was lost with commit ab370b6ad8.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 79ff79c422)
Since we've changed to podman configuration using the detach mode and
systemd type to forking then the container logs aren't present in the
journald anymore.
The default conmon log driver is using k8s-file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 16cd183b9c)
When using the curl command with ipv6 address and brackets then we need
to use the -g option otherwise the command fails.
$ curl http://[fdc2:328:750b:6983::6]:8080
curl: (3) [globbing] error: bad range specification after pos 9
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit cdb7b09cd7)
This file is currently deployed with '0644' ownership making this file
readable by any user on the system.
Since it contains sensitive information it should be readable by the
owner only.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890119
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a822f77300)
Correctly set `osd_ids_non_container.stdout_lines` to an empty list if it's
undefined (i.e. in check mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 8b0023cb77)
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 8f436ab5d8)
The current task installs the ceph-crash key to "most" hosts via
"delegate_to". This key is only used by the ceph-crash daemon and should
just be installed on all hosts targeted by this role. There is no need
for using a delegated task.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 68cc93fb18)
The service should be started after the ceph-osd systemd overrides has
been added, otherwise, the latter isn't considered.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1860739
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 59d0f01992)
Using the + operation on two lists doesn't filter out the duplicate
keys.
Currently each OSDs is started (via systemd) twice.
Instead we could use the union filter.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4eaa65c362)
the `stat --printf=%n` returns something like following:
```
ok: [osd0] => changed=false
cmd: |-
stat --printf=%n /var/run/ceph/ceph-osd*.asok
delta: '0:00:00.009388'
end: '2020-10-06 06:18:28.109500'
failed_when_result: false
rc: 0
start: '2020-10-06 06:18:28.100112'
stderr: ''
stderr_lines: <omitted>
stdout: /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
stdout_lines: <omitted>
```
it makes the next task "check if the ceph osd socket is in-use" grep
like this:
```
ok: [osd0] => changed=false
cmd:
- grep
- -q
- /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
- /proc/net/unix
```
which will obviously fail because this path never exists. It makes the
OSD handler broken.
Let's use `find` module instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 46d4d97da9)
Make sure the `site.yml.sample` playbook can be run in check mode by skipping
tasks that try to read the output of commands that have been skipped.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 54ba38e35e)
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook in baremetal deployments.
When ceph-osd notifies handlers, it means rgw handlers are triggered
too. The issue with this is that they are triggered before the role
ceph-rgw is run.
In the case a scaleout operation is expected on `radosgw_num_instances`
it causes an issue because keyrings haven't been created yet so the new
instances won't start.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a802fa2810)
In case of deploying new monitor node to an existing cluster,
osd_pool_default_crush_rule should be taken from running monitor because
ceph-osd role won't be run and the new monitor will have different
osd_pool_default_crush_role from other monitors.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit ff9f4d138f)
This commit adds connection checks before realm pulls
Curls are performed on the endpoint being pulled from
the mons and the rgws
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1731158
Signed-off-by: Ali Maredia <amaredia@redhat.com>
(cherry picked from commit 902575369c)
In non containerized deployment we check if the service is running
via the socket file presence.
This is done via the xxx_socket_stat variable that check the file
socket in the /var/run/ceph/ directory.
In some scenarios, we could have the socket file still present in
that directory but not used by any process.
That's why we have the xxx_stat variable which clean those leftovers.
The problem here is that we're set the variable for the handlers status
(like handler_mon_status) based on xxx_socket_stat instead of xxx_stat.
That means we will trigger the handlers if there's an old socket file
present on the system without any process associated.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1866834
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 733596582d)
delegate to its own host after checking mon socket to findout if mon socket is in-use or not.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit 69f7e35382)
We don't use ceph_release variable in the ceph.conf jinja template.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 62bd41f0d4)
libjemalloc1 package is not required neither for ganesha dependency nor
for the package build process. So this task can be simply dropped.
Signed-off-by: Dmitriy Rabotyagov <noonedeadpunk@ya.ru>
(cherry picked from commit 297532ca41)
There's no need to define a variable via a fact if we can do it via a
default value. Using a fact could be interesseting to override the
default value on some condition.
- ceph_uid could be set to 167 by default because it's only different on
non containerized deployment on Debian/Ubuntu.
- rbd_client_directory_{owner,group,mode} could be set to ceph,ceph,0770
by default install of null as we are doing in the facts.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1875058
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7f997e623a)
When using a quote in the registry password then we have the following
error:
The error was: ValueError: No closing quotation
To fix this we need to use the quote filter.
Close: https://bugzilla.redhat.com/show_bug.cgi?id=1880252
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 6dcfdf17d4)
the current condition doesn't work, as soon as the first iteration is
done the condition makes next iterations skip since `rgw_instances` got
set with the first iteration.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1859872
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ff19c1d851)
The iscsi nodes aren't included in the logrotate condition.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 85643edfe3)
When using a http(s) proxy with either docker or podman we can rely on
the HTTP_PROXY, HTTPS_PROXY and NO_PROXY environment variables.
But with ansible, even if those variables are defined in a source file
then they aren't loaded during the container pull/login tasks.
This implements the http(s) proxy support with docker/podman.
Both implementations are different:
1/ docker doesn't rely en the environment variables with the CLI.
Thos are needed by the docker daemon via systemd.
2/ podman uses the environment variables so we need to add them to
the login/pull tasks.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1876692
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit bda3581294)
We don't need to install node-exporter on client node because there's
no ceph services running on them.
This also makes sure we use the group name variables in the prometheus
service template instead of hardcoding the values.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit b105549ed8)
This reverts commit f607857f2a.
> That commit [1] introduced a regression in the dashboard configuration
> because the ceph config get mgr xxxx command doesn't work with
> nautilus.
> In that release the get operation needs an entity.
> [1] f607857
Signed-off-by: Dimitri Savineau dsavinea@redhat.com
there's no need to add each rgw section on all rgw nodes.
With this commit, only related rgw section are rendered.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0a581a6e60)
The rtslib python library is now available in the distribution so we
shouldn't have to use the shaman repository
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 254ab54f80)
We were only supporting CentOS 8 for containerized deployment.
Since Nautilus 14.2.10 we now have el8 rpm packages so we should be
able to deploy a nautilus ceph cluster with el8.
Note that the nfs-ganesha isn't supported because there's no el8 rpm
packages for nfs-ganesha V2.8.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Add the `check` option to server definitions to enable basic HAProxy health
checks for Ceph RADOS gateway backends.
Currently traffic will be forwarded to unhealthly `radosgw.service` servers.
These changes resolve the issue.
Signed-off-by: Niko Smeds nikosmeds@gmail.com
(cherry picked from commit a951c1a3f0)
this commit splits this task in order to avoid using a `shell` module.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 54d3e9650f)
This should reduce number of 'changed' tasks during convergence test.
Signed-off-by: George Shuklin <george.shuklin@gmail.com>
(cherry picked from commit 73d4bb6bd6)
Dimitri Savineau
Guillaume Abrioux
Gaudenz Steinlin
Benoît Knecht
wangxiaotong
Seena Fallah
Ali Maredia
Dmitriy Rabotyagov
Niko Smeds
George Shuklin