3a100cfa52 introduced a check which is a
bit too restrictive, let's accept HEALTH_OK and HEALTH_WARN.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6dce51183b)
As per bz1718981, this commit adds higher values to check
the quorum status. This is helpful for several OSP deployments
that fail during the scale up.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1718981
Signed-off-by: fpantano <fpantano@redhat.com>
(cherry picked from commit ba73dc7b21)
The ceph-volume lvm list command takes ages to complete when having
a lot of LV devices on containerized deployment.
For instance, with 25 OSDs on a node it takes 3 mins 44s to list the
OSD.
Adding the max open files limit to the container engine cli when
executing the ceph-volume command seems to improve a lot thee
execution time ~30s.
This was impacting the OSDs creation with ceph-volume (both filestore
and bluestore) when using multiple LV devices.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1702285
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit b987534881)
We already set the become flag to true at a play level in the site*
playbooks so we don't need to set it at a task level.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7c3640177b)
The ceph restapi configuration was only available until Luminous
release so we don't need those leftovers for nautilus+.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit da8b7ab7fb)
`parted_results` isn't used anymore in the playbook.
By the way, `parted` seems to cause issue because it changes the
ownership on devices:
```
root@osd0 ~]# ls -l /dev/sdc*
brw-rw----. 1 root disk 8, 32 Jun 11 08:53 /dev/sdc
brw-rw----. 1 ceph ceph 8, 33 Jun 11 08:53 /dev/sdc1
brw-rw----. 1 ceph ceph 8, 34 Jun 11 08:53 /dev/sdc2
[root@osd0 ~]# parted -s /dev/sdc print
Model: ATA QEMU HARDDISK (scsi)
Disk /dev/sdc: 53.7GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 1075MB 1074MB ceph block.db
2 1075MB 2149MB 1074MB ceph block.db
[root@osd0 ~]# #We can see ownerships have changed from ceph:ceph to root:disk:
[root@osd0 ~]# ls -l /dev/sdc*
brw-rw----. 1 root disk 8, 32 Jun 11 08:57 /dev/sdc
brw-rw----. 1 root disk 8, 33 Jun 11 08:57 /dev/sdc1
brw-rw----. 1 root disk 8, 34 Jun 11 08:57 /dev/sdc2
[root@osd0 ~]#
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit eece362b38)
starting an upgrade if the cluster isn't HEALTH_OK isn't a good idea.
Let's check for the cluster status before trying to upgrade.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3a100cfa52)
Otherwise it fails like following:
```
fatal: [mon0]: FAILED! => changed=false
msg: |-
Unable to enable service ceph-mgr@mon0: Failed to execute operation: Cannot send after transport endpoint shutdown
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 51b2813e04)
This commits adds the support of the installer phase for dashboard,
grafana and node-exporter roles.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c7a5967a6f)
The definitions of cephfs pools should match openstack pools.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Co-Authored-by: Simone Caronni <simone.caronni@teralytics.net>
(cherry picked from commit 67071c3169)
The ceph-agent role was used only for RHCS 2 (jewel) so it's not
usefull anymore.
The current code will fail on CentOS distribution because the rhscon
package is only avaible on Red Hat with the RHCS 2 repository and
this ceph release is supported on stable-3.0 branch.
Resolves: #4020
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7503098ca0)
ceph-dashboard should be deployed on either a dedicated mgr node or a
mon if they are collocated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit bdc870cbf5)
Because we're using vagrant, a ssh config file will be created for
each nodes with options like user, host, port, identity, etc...
But via tox we're override ANSIBLE_SSH_ARGS to use this file. This
remove the default value set in ansible.cfg.
Also adding PreferredAuthentications=publickey because CentOS/RHEL
servers are configured with GSSAPIAuthenticationis enabled for ssh
server forcing the client to make a PTR DNS query.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 34f9d51178)
CI is facing issues where docker pull reach the timeout, let's increase
this to avoid CI failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 1019e3b3dc)
Since timesyncd is not available on RHEL-based OSs, change the default
to chronyd for RHEL-based OSs. Also, chronyd is chrony on Ubuntu, so
set the Ansible fact accordingly.
Fixes: https://github.com/ceph/ceph-ansible/issues/3628
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 9d88d3199f)
if we don't assign the rbd application tag on this pool,
the cluster will get `HEALTH_WARN` state like following:
```
HEALTH_WARN application not enabled on 1 pool(s)
POOL_APP_NOT_ENABLED application not enabled on 1 pool(s)
application not enabled on pool 'rbd'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4cf17a6fdd)
Ubuntu-based CI jobs often fail with error code 404 while installing
NTP daemons. Updating cache beforehand should fix the issue.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit d1c266e6c7)
069076b introduced a bug in the systemd unit script template. This
commit fixes the options used by the node-exporter container.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d0840217f3)
Add a variable to support the allow_embedding support.
See ceph/ceph-ansible/issues/4084 for details.
Fixes: #4084
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 27856cc499)
This setting must be set to something resolvable.
See: ceph/ceph-ansible/issues/4085 for details
Fixes: #4085
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2c9cd9d9e7)
We're using fuser command to see if a process is using a ceph unix
socket file. But the fuser command runs through every PID present in
/proc/<PID> to see if one of them is using the file.
On a system running thousands processes, the fuser command can take
a long time to finish.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1717011
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit da9891da1e)
We don't need to use dev_setup playbook on stable branch. We also
need to remove the dev container image variables and update the
value to match nautilus.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using the modprobe command from the path in the systemd
unit script, we can use the modprobe ansible module.
That way we don't have to manage the binary path based on the linux
distribution.
Resolves: #4072
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit dbf81b6b5b)
Few fixes on systemd unit templates for node_exporter and
alertmanager container parameters.
Added the ability to use a dedicated instance to deploy the
dashboard components (prometheus and grafana).
This commit also introduces the grafana_group_name variable
to refer grafana group and keep consistency with the other
groups.
During the integration with TripleO some grafana/prometheus
template variables resulted undefined. This commit adds the
ability to check if the group exist and create, accordingly,
different job groups in prometheus template.
Signed-off-by: fmount <fpantano@redhat.com>
(cherry picked from commit 069076bbfd)
This can be seen as a regression for customers who were used to deploy
in offline environment with custom repositories.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1673254
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c933645bf7)
Currently we're only able to use podman on ubuntu if podman's
installation is done manually before the ceph-ansible execution
because the deb package is present in an external repository.
We already manage the docker-ce installation via an external
repository so we should be able to allow the podman installation
with the same mechanism too.
https://github.com/containers/libpod/blob/master/install.md#ubuntuResolves: #3947
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 518ab794fb)
When using podman, the systemd unit scripts don't have a dependency
on the network. So we're not sure that the network is up and running
when the containers are starting.
With docker this behaviour is already handled because the systemd
unit scripts depend on docker service which is started after the
network.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f49090df7e)
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
(cherry picked from commit ab54fe20ec)
We currently only purge rh_storage yum repository file but depending
on the ceph_repository value we are using, the ceph repository file
could have a different name.
Resolves: #4056
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 44c63903ca)
This add support for rgw loadbalancer based on HAProxy and Keepalived.
We define a single role ceph-rgw-loadbalancer and include HAProxy and
Keepalived configurations all in this.
A single haproxy backend is used to balance all RGW instances and
a single frontend is exported via a single port, default 80.
Keepalived is used to maintain the high availability of all haproxy
instances. You are free to use any number of VIPs. A single VIP is
shared across all keepalived instances and there will be one
master for one VIP, selected sequentially, and others serve as
backups.
This assumes that each keepalived instance is on the same node as
one haproxy instance and we use a simple check script to detect
the state of each haproxy instance and trigger the VIP failover
upon its failure.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
(cherry picked from commit 35d40c65f8)
if `nfs_obj_gw` is True when deploying an internal ganesha with an
external ceph cluster, `ceph_nfs_rgw_access_key` and
`ceph_nfs_rgw_secret_key` must be provided so the
ganesha configuration file can be generated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 003aeea45a)
This commits allows to deploy an internal ganesha with an external ceph
cluster.
This requires to define `external_cluster_mon_ips` with a comma
separated list of external monitors.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710358
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6a6785b719)
Otherwise content in /run/udev is mislabeled and prevent some services
like NetworkManager from starting.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 80875adba7)
the rhel8 image used is an outdated beta version, it is not worth it to
maintain this image upstream, since it's possible to test podman with a
newer version of centos/atomic-host image.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a78fb209b1)
Since the split between container-engine and container-common roles,
the tags and condition were not updated to reflect the change.
- ceph-container-engine needs with_pkg tag
- ceph-container-common needs fetch_container_images
- we don't need to pull the container image in a dedicated task for
atomic host. We can now use the ceph-container-common role.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2d375e1aa7)
789cef7 introduces a regression in the ganesha configuration file
generation. The new config_template module version broke it.
But the ganesha.conf file isn't an ini file and doesn't really
need to use the config_template module. Instead we can use the
classic template module.
Resolves: #4045
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 616c484698)
The fsid generation is done via a python command. When the ansible
controller node only have python3 available (like RHEL 8) then the
python command isn't necessarily present causing the fsid generation
to fail.
We already do some resource creation (like ceph keyring secret) with
the python command too but from the mon node so we should do the same
for fsid.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1714631
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit daf92a9e1f)
We don't use ceph/ubuntu-xenial anymore but only centos/7 and
centos/atomic-host.
Changing the default to centos/7.
Resolves: #4036
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 24d0fd7003)
This change pulls in the most recent release of the config_template module
into the ceph_ansible action plugins.
Signed-off-by: Kevin Carter <kecarter@redhat.com>
(cherry picked from commit 789cef7621)
This commit adds `pytest-rerunfailures` in requirements.txt so we can
retry failing test in testinfra to avoid false positive. (eg: sometimes it
can happen for some reason a service takes too much time to start)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4708b7615f)
This commit splits the current `ceph-container-common` role.
This introduces a new role `ceph-container-engine` which handles the
tasks specific to the installation of containers tools (docker/podman).
This is needed for the ceph-dashboard implementation for 2 main reasons:
1/ Since the ceph-dashboard stack is only containerized, we must install
everything needed to run containers even in non containerized
deployments. Splitting this role allows us to not have to call the full
`ceph-container-common` role which would run a bunch of unneeded tasks
that would have been skipped anyway.
2/ The current implementation would have required to run
`ceph-container-common` on all ceph-clients nodes which would have been
conflicting with 9d3517c670 (we don't want
to run ceph-container-common on all client nodes, see mentioned commit
for more details)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 55420d6253)
The ceph mgr dashboard requires routes python library to be installed
on the system.
Resolves: #3995
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f37edfa113)
gpg package isn't available for all Debian/Ubuntu distribution but
gnupg is.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 622d9feae9)
As of nautilus, if you set `ms bind ipv6 = True` you must explicitly set
`ms bind ipv4 = False` too, otherwise OSDs will still try to pick up an
IPv4 address.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710319
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6ca7372a2d)
Guillaume Abrioux
fpantano
Dimitri Savineau
Rishabh Dave
L3D
guihecheng
Kevin Carter