Since Nautilus there's mgr extra modules not present in ceph-mgr
package but in dedicated packages.
Resolves: #3860
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
These tasks must be run from a monitor which is upgraded otherwise it
might fail.
See: https://tracker.ceph.com/issues/39355
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
these commands could return something else than 0.
Let's ensure all retries have been done before actually failing.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this commit refact the msgr2 protocol introduction.
If it's a fresh install, let's go with v2 only.
If we upgrade to nautilus, we should go with v2+v1 syntax to ensure
nothing breaks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We do this so that the ceph-config role can most accurately
report the number of osds for the generation of the ceph.conf
file.
We don't want to use ceph-volume to determine the number of
osds because in an upgrade to nautilus ceph-volume won't be able to
accurately count osds created by ceph-disk.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
When performing a rolling update do not try to create
any new osds with `ceph-volume lvm batch`. This is troublesome
because when upgrading to nautilus the devices list might contain
devices that are currently being used by ceph-disk and have GPT
headers on them, which will cause ceph-volume to fail when
trying to use such a device. Any devices originally created
by ceph-disk will need to be removed from the devices list
before any new osds can be created.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This test deploys a luminous cluster with ceph-disk created osds
and then upgrades to nautilus and migrates those osds to ceph-volume.
The nodes are then rebooted and cluster state verified.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
When upgrading to nautlius run ``ceph-volume simple scan`` and
``ceph-volume simple activate --all`` to migrate any running
ceph-disk osds to ceph-volume.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1656460
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The library directory that contain the custom ceph modules in present
in the ceph-ansible root directory.
All igw_* mocules are already present there so we don't need the one
present in roles/ceph-iscsi-gw/library.
Also remove the associated spec file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since there's only only scenario available we don't need lvm_scenario
and no_lvm_scenario.
Also add missing assert for ceph-volume tests.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently we only support ansible 2.7
We plan to use 2.8 when it will be release so we have to support both
2.7 and 2.8.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1700548
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In the CI jobs we can change the mount options of the main partition
to avoid extra operations on disk.
Adding jmespath to tests/requirements.txt due to the json_query
filter usage.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since nautilus and msgr2 the monitors also bind on port 3300 in
addition of 6789.
This patch updates test_mons to reflect that change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Because 5c98e361df could be seen as a non
backward compatible change this commit reverts it and bring back package
dependencies installation support.
Let's just modify the default value instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
These packages aren't needed anymore.
They were needed for ceph-init-detect buti as of ceph-init-detect doesn't exist
anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1683885
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a playbook that deploys a new monitor on a new node, adds that node
to the Ceph cluster and the monitor to the quorum and updates the ceph
configuration file on OSD nodes.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
When adding a new monitor, we must reuse the existing initial monitor
keyring. Otherwise, the new monitor will issue its 'mkfs' with a new
monitor keyring and it will result with a mismatch between them. The
new monitor will be unable to join the quorum in the end.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Rishabh Dave <ridave@redhat.com>
When using purge-cluster playbook with nautilus, there's still the
python-ceph-argparse package installed on the host preventing to
reinstall a ceph cluster with a different version (like luminous or
mimic)
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
[rgw] isn't a valide section.
[client.rgw.{instance_name] should be used instead.
Resolves: #3841
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
e6bfb84 introduced a regression in the switch from non containerized
to container deployment.
We need to stop all previous OSDs services. We just don't need the
ceph-disk pattern in the regex.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
as of stable-4.0, ceph-disk is no longer supported.
Let's remove this legacy version of the playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
we must pass the value of osd_scenario from the stable-3.2 branch which
is used for the initial deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This variable was related to ceph-disk scenarios.
Since we are entirely dropping ceph-disk support as of stable-4.0, let's
remove this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commits adds documentation for the lvm scenario and the deprecation
of collocated and non-collocated scenario.
Signed-off-by: Sébastien Han <seb@redhat.com>
osd_scenario has become obsolete and defaults to lvm. With lvm there is
no such things has collocated and non-collocated.
Signed-off-by: Sébastien Han <seb@redhat.com>
We don't support the preparation of OSD with ceph-disk. ceph-volume is
only supported. However, the start operation of OSD is still supported.
So let's say you change a config option, the handlers will be able to
restart all the OSDs via their respective systemd unit files.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
It's usefull to have logs in debug mode enabled in order to have
more information for developpers.
Also reindent to json file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to have multiple ceph-override.json copies. We
currently already have symlink to all_daemons/ceph-override.json so
we can do it for all scenarios.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to use the cephfs variable for the application pool
name because it's always cephfs.
If the cephfs variable is set to something else than the default
value it will break the appplication pool task.
Resolves: #3790
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
ceph-volume didn't work when the devices where passed by path.
Since it now support it, let's allow this feature in ceph-ansible
Closes: #3812
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As discussed in ceph/ceph#26599, beast is now the default frontend
for rados gateway with nautilus release.
Add rgw_thread_pool_size variable with 512 as default value and keep
backward compatibility with num_threads option when using civetweb.
Update radosgw_civetweb_num_threads to reflect rgw_thread_pool_size
change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
docker daemon is automatically started during package installation
but the service isn't enabled on boot.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
ceph aliases have been introduced in stable-3.2 during the ceph
deployment. On master this has been removed but we don't handle
this removal in the upgrade from stable-3.2 to master via the
rolling_update playbook.
Also remove the task from purge-docker-cluster missing from
d9e7835
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Dimitri Savineau
Guillaume Abrioux
Andrew Schoen
Rishabh Dave
Sébastien Han