`monitor_address_block` should be read from hostvars[host] instead of
current node being played.
eg:
Let's assume we have:
```
[mons]
ceph-mon0 monitor_address=192.168.1.10
ceph-mon1 monitor_interface=eth1
ceph-mon2 monitor_address_block=192.168.1.0/24
```
the ceph.conf generation task will end up with:
```
fatal: [ceph-mon0]: FAILED! => {}
MSG:
'ansible.vars.hostvars.HostVarsVars object' has no attribute u'ansible_interface'
```
the reason is that it will assume `monitor_address_block` isn't defined even on
ceph-mon2 because looking for `monitor_address_block` instead of
`hostvars[host]['monitor_address_block']`, therefore it enters in the condition as default value:
```
{%- else -%}
{% set interface = 'ansible_' + (monitor_interface | replace('-', '_')) %}
{% if ip_version == 'ipv4' -%}
{{ hostvars[host][interface][ip_version]['address'] }}
{%- elif ip_version == 'ipv6' -%}
[{{ hostvars[host][interface][ip_version][0]['address'] }}]
{%- endif %}
{%- endif %}
```
`monitor_interface` is set with default value `'interface'` so the `interface`
variable is built with 'ansible_' + 'interface'. It makes ansible throwing a
confusing message about `'ansible_interface'`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1635303
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6130bc841d)
38dc20e74b introduced a bug in the purge
playbooks because using `*` in `command` module doesn't work.
`/var/lib/ceph/*` files are not purged it means there is a leftover.
When trying to redeploy a cluster, it failed because monitor daemon was
detecting existing keyring, therefore, it assumed a cluster already
existed.
Typical error (from container output):
```
Sep 26 13:18:16 mon0 docker[31316]: 2018-09-26 13:18:16 /entrypoint.sh: Existing mon, trying to rejoin cluster...
Sep 26 13:18:16 mon0 docker[31316]: 2018-09-26 13:18:16.9323937f15b0d74700 -1 auth: unable to find a keyring on /etc/ceph/test.client.admin.keyring,/etc/ceph/test.keyring,/etc/ceph/keyring,/etc/ceph/keyring.bin,:(2) No such file or directory
Sep 26 13:18:23 mon0 docker[31316]: 2018-09-26 13:18:23 /entrypoint.sh:
SUCCESS
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1633563
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 144c92b21f)
`+` is more idiomatic for "one or more" in a regex than `{1,}`; the
latter was introduced in a previous fix for an incorrect `{1,2}`
restriction.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit 806461ac6e)
After restarting each OSD, restart_osd_daemon.sh checks that the
cluster is in a good state before moving on to the next one. One of
the checks it does is that the number of pgs in the state
"active+clean" is equal to the total number of pgs in the cluster.
On large clusters (e.g. we have 173,696 pgs), it is likely that at
least one pg will be scrubbing and/or deep-scrubbing at any one
time. These pgs are in state "active+clean+scrubbing" or
"active+clean+scrubbing+deep", so the script was erroneously not
including them in the "good" count. Similar concerns apply to
"active+clean+snaptrim" and "active+clean+snaptrim_wait".
Fix this by considering as good any pg whose state contains
active+clean. Do this as an integer comparison to num_pgs in pgmap.
(could this be backported to at least stable-3.0 please?)
Closes: #2008
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit 04f4991648)
Previous commit c13a3c3 has removed a condition.
This commit brings back this condition which is essential to ensure we
won't hit a false positive result in the `when` condition for the check
PGs task.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 179c4d00d7)
In cluster with a large number of PGs, it can be expected some of them
scrubbing, it's a normal operation.
Preventing from scrubbing operation force to set noscrub flag before a
rolling update which is a problem because it pauses an important data
integrity operation until the end of the rolling upgrade.
This commit allows an upgrade even while PGs are scrubbing.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1616066
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c13a3c3492)
Previously RETRIES was set (by default to 40) once at the start of the
script; this meant that it would only ever wait for up to 40 lots of
30s across *all* the OSDs on a host before bombing out. In fact, we
want to be prepared to wait for the same amount of time after each OSD
restart for the clusters' pgs to be happy again before continuing.
Closes: #3154
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit aa97ecf048)
the default value for _rgw_hostname was took from the current node being
played while it should be took from the respective node in the loop.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622505
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6d6fd514e0)
ce1dd8d introduced the purge osd on containers but it was incorrect.
`resolve parent device` and `zap ceph osd disks` tasks must be delegated to
their respective OSD nodes.
Indeed, they were run on the ansible node, it means it was trying to
resolve parent devices from this node where it should be done on OSD
nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1612095
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4159326a18)
As of rhel 7.6, it has been decided it doesn't make sense to confine
`ganesha_t` anymore. It means this domain won't exist anymore.
Let's add a `failed_when: false` in order to make the deployment not
failing when trying to run this command.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1626070
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a6f77340fd)
using sphinx 1.8.0 breaks our doc test CI job.
Typical error:
```
Exception occurred:
File
"/home/jenkins-build/build/workspace/ceph-ansible-docs-pull-requests/docs/.tox/docs/lib/python2.7/site-packages/sphinx/highlighting.py", line 26, in <module>
from sphinx.ext import doctest
SyntaxError: unqualified exec is not allowed in function 'run' it contains a nested function with free variables (doctest.py, line 97)
```
See: https://github.com/sphinx-doc/sphinx/issues/5417
Pinning to 1.7.9 to fix our CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8f2c660d25)
let's add ansible_hostname as a default value for rgw_hostname if no
hostname in servicemap matches ansible_fqdn.
Fixes: #3063
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622505
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9ff26e80f2)
Using `UPDATE_*` environment variables here will make an upgrade of the
ceph release when running switch_to_containers scenario which is not
correct.
Eg:
If ceph luminous was first deployed, then we should switch to ceph
luminous containers, not to mimic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit is adding quotes that make keyring unusuable
eg:
```
client.john
key: AQAN0RdbAAAAABAAH5D3WgMN9Rxw3M8jkpMIfg==
caps: [mds] ''
caps: [mgr] 'allow *'
caps: [mon] 'allow rw'
caps: [osd] 'allow rw'
```
Trying to import such a keyring and use it will result:
```
Error EACCES: access denied
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1623417
This reverts commit 424815501a.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ecbd3e4558)
Sometime /var/lib/ceph is mounted on a device so we won't be able to
remove it (device busy) so let's remove its content only.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1615872
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 38dc20e74b)
When ceph-nfs is deployed containerized and ceph-common is not
installed on the host the start_nfs task fails because the rados
command is missing on the host.
Run rados commands from a ceph container instead so that
they will succeed.
Signed-off-by: Tom Barron <tpb@dyncloud.net>
(cherry picked from commit bf8f589958)
If the ceph-radosgw target is not enabled, then enabling the
ceph-radosgw@ service has no effect since nothing will pull
it on the next reboot. As such, we need to ensure that the
target is enabled.
Signed-off-by: Markos Chandras <mchandras@suse.de>
(cherry picked from commit 217f35dbdb)
The dummy client container currently wont work on non-x86_64 hosts.
This PR creates a filtered client group that contains only hosts
that are x86_64 - which can then be the group to run the
dummy container against.
This is for the specific case of a containerized_deployment where
there is a mixture of non-x86_64 hosts and x86_64 hosts. As such
the filtered group will contain all hosts when running with
containerized_deployment: false.
Currently ppc64le is not supported for Ceph server components.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
(cherry picked from commit 772e6b9be2)
We have been supporting multiple devices for journalin containerized
deployments for a while now and forgot about this.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622393
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 124fc727f4)
Same problem again... ceph_release_num[ceph_release] is only set in
ceph-docker-common/common roles so putting the condition on that role
will never work. Removing the condition.
The downside of this is we will be installing packages and then skip the
role on the node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622210
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit ae5ebeeb00)
If we play site-docker.yml, we are already in a
containerized_deployment. So the condition is not needed.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 30cfeb5427)
There is no point of using hosts running on atomic AND centos hosts. So
let's run containerized scenarios on Atomic only.
This solves this error here:
```
fatal: [client2]: FAILED! => {
"failed": true
}
MSG:
The conditional check 'ceph_current_status.rc == 0' failed. The error was: error while evaluating conditional (ceph_current_status.rc == 0): 'dict object' has no attribute 'rc'
The error appears to have been in '/home/jenkins-build/build/workspace/ceph-ansible-nightly-luminous-stable-3.1-ooo_collocation/roles/ceph-defaults/tasks/facts.yml': line 74, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- name: set_fact ceph_current_status (convert to json)
^ here
```
From https://2.jenkins.ceph.com/view/ceph-ansible-stable3.1/job/ceph-ansible-nightly-luminous-stable-3.1-ooo_collocation/37/consoleFull#1765217701b5dd38fa-a56e-4233-a5ca-584604e56e3a
What's happening here is all the hosts excepts the clients are running atomic, so here: https://github.com/ceph/ceph-ansible/blob/master/site-docker.yml.sample#L62
The condition will skipped all the nodes excepts the clients, thus when running ceph-default, the task "is ceph running already?" is skipped but the task above needs the rc of the skipped task.
This is not an error from the playbook, it's a CI setup issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 7012835d2b)
A couple if things were wrong in the initial commit:
* ceph_release_num[ceph_release] >= ceph_release_num['luminous'] will
never work since the ceph_release fact is set in the roles after. So
either ceph-common or ceph-docker-common set it
* we can easily re-use the initial command to check if a cluster is
running, it's more elegant than running it twice.
* set the fact rgw_hostname on rgw nodes only
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1618678
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 6d7fa99ff7)
Running 'osd set sortbitwise' when we detect a version 12 of Ceph is
wrong. When OSD are getting updated, even though the package is updated
they won't send their updated version (12) and will stick with 10 if the
command is not applied. So we have to check if OSD are sending a version
10 and then run the command to unlock the OSDs.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600943
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 2e6e885bb7)
Recently we renamed the group_name for iscsi iscsigws where previously
it was named iscsi-gws. Existing deployments with a host file section
with iscsi-gws must continue to work.
This commit adds the old group name as a backoward compatility, no error
from Ansible should be expected, if the hostgroup is not found nothing
is played.
Close: https://bugzilla.redhat.com/show_bug.cgi?id=1619167
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 77a3a682f3)
We were using var_files long ago when default variables were not in
ceph-defaults, now the role exists this is not need. Moreover having
these two var files added:
- roles/ceph-defaults/defaults/main.yml
- group_vars/all.yml
Will create collision and override necessary variables.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1555305
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit b738706810)
Since commit f422efb1d6 ("config: ensure
rgw section has the correct name") we observe the following failures in
new Ceph deployment with OpenStack-Ansible
fatal: [aio1_ceph-rgw_container-fc588f0a]: FAILED! => {"changed": false,
"cmd": "ceph --cluster ceph -s -f json", "msg": "[Errno 2] No such file
or directory"
This is because the task executes 'ceph' but at this point no package
installation has happened. Packages are normally installed in the
'ceph-common' role which runs after the 'ceph-defaults' one.
Since we are looking to obtain cluster information, the task should be
delegated to a monitor node similar to other tasks in that role
Signed-off-by: Markos Chandras <mchandras@suse.de>
(cherry picked from commit 37e50114de)
If there are no services on the cluster, then the 'rgw' could be missing
and the task is failing with the following problem:
msg": "The task includes an option with an undefined variable.
The error was: 'dict object' has no attribute 'rgw'
We fix this by checking the existence of the 'rgw' attribute. If it's
missing, we skip the task since the role already contains code to set
a good default rgw_hostname.
Signed-off-by: Markos Chandras <mchandras@suse.de>
(cherry picked from commit 126e2e3f92)
Follow up on 36942af698
"disabled_modules" is always a list, it's the items in the list that
can be dicts in mimic. Many ways to fix this, here's one.
Signed-off-by: Dardo D Kleiner <dardokleiner@gmail.com>
(cherry picked from commit f6519e4003)
The copy module does in fact do variable interpolation so we do not need
to use the template module or keep a template in the source.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 04df3f0802)
Signed-off-by: Sébastien Han <seb@redhat.com>
Using an explicitly named testing environment name allows us to have a
specific [testenv] block for this test. This greatly simplifies how it will
work as it doesn't really anything from the ceph cluster tests.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 810cc47892)
Signed-off-by: Sébastien Han <seb@redhat.com>
This allows user to opt out of using lv_vars.yml and load configuration
from other sources.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit b0bfc17351)
Signed-off-by: Sébastien Han <seb@redhat.com>
If a user decides to to use the lv_vars.yml file then it should fail
silenty so that configuration can be picked up from other places.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit e43eec57bb)
Signed-off-by: Sébastien Han <seb@redhat.com>
The copy module will not expand the template and render the variables
included, so we must use template.
Creating a temp file and using it locally means that you must run the
playbook with sudo privledges, which I don't think we want to require.
This introduces a logfile_path variable that the user can use to control
where the logfile is written to, defaulting to the cwd.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 35301b35af)
Signed-off-by: Sébastien Han <seb@redhat.com>
Guillaume Abrioux
Matthew Vernon
Giulio Fidente
Sébastien Han
Tom Barron
Markos Chandras
Andy McCrae
Dardo D Kleiner
Andrew Schoen
Neha Ojha