When using skipped variables with from_json filter and python2 then we
need to have a default value otherwise the skipped task will fail.
Unexpected templating type error occurred on
({{ (ceph_volume_lvm_list.stdout | from_json) }}): expected string or
buffer
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790472
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since [1] we need to set pacific for the required OSD release during the
upgrade.
[1] https://github.com/ceph/ceph/commit/cc99c3bc
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The workflow in this playbook should be the same than in rolling_update,
we should first set noout and nodeep-scrub flags before migrating the
first osd and unset osd flags after the last osd is migrated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When setting/unsetting osd flags, we can use `tasks_from` when importing
`ceph-facts` role to save some times given that we only need this role
for setting `container_binary`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We must call `ceph-osd` role from `container_options_facts.yml` because
ceph-osd-run.sh.j2 needs variables set in this file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1819681
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commits removes these two symlinks.
They were there for backward compatibility and were marked deprecated as
of stable-4.0
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Adding `--all` to the `systemctl list-units` command in order to get
*all* osds id on the node (including stoppped osds). Otherwise, it will
purge the cluster but there will be leftover after that.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1814542
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since Ceph Octopus is python3 only we don't need to specify the max open
files anymore with the container engine.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We only disable the ceph-osd services but not the ceph-volume lvm
services during the filestore to bluestore migration.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We should add retry/delay to check the presence of the rbdmirror daemon
in the cluster status because the status takes some time to be updated.
Also the metadata.hostname isn't a good key to check because it doesn't
reflect the ansible_hostname fact. We should use metadata.id instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This playbook was using mds systemd condition.
Also a command task was using pipeline which is not allowed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph-facts are running on localhost so if this node is using a
different OS/release that the ceph node we can have a mismatch between
docker/podman container binary.
This commit also reduces the scope of the ceph-facts role because we only
need the container_binary tasks.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
It looks like that the service module doesn't support wildcard anymore
for stopping/disabling multiple services.
fatal: [rgw0]: FAILED! => changed=false
msg: 'This module does not currently support using glob patterns,
found ''*'' in service name: ceph-radosgw@*'
...ignoring
Instead we should iterate over the rgw_instances list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When running environment with OSDs having ID with more than 2 digits,
some tasks don't match the system units and therefore, playbook can fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1805643
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We need to call ceph-facts only for setting `container_binary`.
Since this task has been isolated we can use `tasks_from` to only execute the
needed task.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If the filestore configuration was using a dedicated journal with either
a partition or a LV/VG then we need to reuse this for bluestore DB.
When filestore is using a raw devices then we shouldn't destroy
everything (data + journal) but only data otherwise the journal
partition won't exist anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790479
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of running shring-osd tasks on localhost and delegating most of
them to the first monitor, run all of them on the first monitor
directly.
This has the added advantage of becoming root on the monitor only, not
on localhost.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
We only support python3 so renaming all ceph python packages.
Some ceph packages were missing from the list (ceph-mon, ceph-osd or
rbd-mirror) or didn't exist anymore (ceph-fs-common, libcephfs1).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit increases the default values for the following variable
consumed in switch-from-non-containerized-to-containerized-ceph-daemons.yml
playbook.
This also moves these variables in `ceph-defaults` role so the user can
set different values if needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1783223
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Fix purge cluster failed when local container images does not exist.
Purge node-exporter and grafana-server only when dashboard_enabled is set to True.
Signed-off-by: wujie1993 qq594jj@gmail.com
If the playbook is used on a host running bluestore OSDs then the
osd_fsid_list won't be filled because the bluestore OSDs are reported
with 'type: block' via ceph-volume lvm list command but we are looking
for 'type: data' (filestore).
TASK [zap ceph-volume prepared OSDs] *********
fatal: [xxxxx]: FAILED! =>
msg: '''osd_fsid_list'' is undefined
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
If the OSD node is already using bluestore OSDs then we should skip
all the remaining tasks to avoid purging OSD for nothing.
Instead we warn the user.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790472
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When the PV is already removed from the devices then we should not fail
to avoid errors like:
stderr: No PV found on device /dev/sdb.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When upgrading from RHCS 3.x where ceph-metrics was deployed on a
dedicated node to RHCS 4.0, it fails like following:
```
fatal: [magna005]: FAILED! => changed=false
gid: 0
group: root
mode: '0755'
msg: 'chown failed: failed to look up user ceph'
owner: root
path: /etc/ceph
secontext: unconfined_u:object_r:etc_t:s0
size: 4096
state: directory
uid: 0
```
because we are trying to run `ceph-config` on this node, it doesn't make
sense so we should simply run this play on all groups except
`[grafana-server]`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1793885
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When osd_auto_discovery is set then we need to refresh the
ansible_devices fact between after the filestore OSD purge
otherwise the devices fact won't be populated.
Also remove the gpt header on ceph_disk_osds_devices because
the devices is empty at this point for osd_auto_discovery.
Adding the bool filter when needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We still need --destroy when using a raw device otherwise we won't be
able to recreate the lvm stack on that device with bluestore.
Running command: /usr/sbin/vgcreate -s 1G --force --yes ceph-bdc67a84-894a-4687-b43f-bcd76317580a /dev/sdd
stderr: Physical volume '/dev/sdd' is already in volume group 'ceph-b7801d50-e827-4857-95ec-3291ad6f0151'
Unable to add physical volume '/dev/sdd' to volume group 'ceph-b7801d50-e827-4857-95ec-3291ad6f0151'
/dev/sdd: physical volume not initialized.
--> Was unable to complete a new OSD, will rollback changes
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792227
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using docker 1.13.1, the current condition:
```
{% if (container_binary == 'docker' and ceph_docker_version.split('.')[0] is version_compare('13', '>=')) or container_binary == 'podman' -%}
```
is wrong because it compares the first digit (1) whereas it should
compare the second one.
It means we always use `--cpu-quota` although documentation recommend
using `--cpus` when docker version is 1.13.1 or higher.
From the doc:
> --cpu-quota=<value> Impose a CPU CFS quota on the container. The number of
> microseconds per --cpu-period that the container is limited to before
> throttled. As such acting as the effective ceiling.
> If you use Docker 1.13 or higher, use --cpus instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the new ceph status registered in `ceph_status` will report `fsmap.up` =
0 when it's the last mds given that it's done after we shrink the mds,
it means the condition is wrong. Also adding a condition so we don't try
to delete the fs if a standby node is going to rejoin the cluster.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1787543
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit lets add-osd.yml in place but mark the deprecation of the
playbook.
Scaling up OSDs is now possible using --limit
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
play vars have lower precedence than role vars and `set_fact`.
We must use a `set_fact` to reset these variables.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds a package installation task in order to install podman
during the docker-to-podman.yml migration playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We only need to have the container_binary fact. Because we're not
gathering the facts from all nodes then the purge fails trying to get
one of the grafana fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786686
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
There's some tasks using the new container image during the rolling
upgrade playbook that needs to execute the registry login first otherwise
the nodes won't be able to pull the container image.
Unable to find image 'xxx.io/foo/bar:latest' locally
Trying to pull repository xxx.io/foo/bar ...
/usr/bin/docker-current: Get https://xxx.io/v2/foo/bar/manifests/latest:
unauthorized
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of running the ceph roles against localhost we should do it
on the first mon.
The ansible and inventory hostname of the rgw nodes could be different.
Ensure that the rgw instance to remove is present in the cluster.
Fix rgw service and directory path.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The command is delegated on the first monitor so we must use the fact
`container_binary` from this node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit deletes the filesystem when no more MDS is present after
shrinking operation.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1787543
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit prevent from shrinking an mds node when max_mds wouldn't be
honored after that operation.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using the ceph dashboard with iscsi gateways nodes we also need to
remove the nodes from the ceph dashboard list.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786686
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
on master we can't test upgrade from stable-4.0/CentOS 7 to
master/CentOS 8.
This commit refact the upgrade so we test upgrade from master/CentOS 8
to master/CentOS 8 (octopus to octopus)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When an OSD is stopped, it leaves partitions mounted.
We must umount them before zapping them, otherwise error like "Device is
busy" will show up.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds a task to ensure device mappers are well closed when
lvm batch scenario is used.
Otherwise, OSDs can't be redeployed given that devices that are rejected
by ceph-volume because they are locked.
Adding a condition `devices | default([]) | length > 0` to remove these
dm only when using lvm batch scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Otherwise, sometimes it can take a while for an OSD to be seen as down
and causes the `ceph osd purge` command to fail.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Do not use `--destroy` when zapping a device.
Otherwise, it destroys VGs while they are still needed to redeploy the
OSDs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds the non containerized context support to the
filestore-to-bluestore.yml infrastructure playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using fqdn in inventory, that playbook fails because of some tasks
using the result of ceph osd tree (which returns shortname) to get
some datas in hostvars[].
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1779021
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In containerized context, containers aren't stopped early in the
sequence.
It means they aren't restarted after the upgrade because the task is
just checking the daemon status is started (eg: `state: started`).
This commit also removes the task which ensure services are started
because it's already done in the role ceph-iscsigw.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
when upgrading from RHCS 3, dashboard has obviously never been deployed
and it forces us to deploy it later manually.
This commit adds the dashboard deployment as part of the upgrade to
RHCS 4.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1779092
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The podman support was added to the purge-container-cluster playbook but
containers are always used for the dashboard even on non containerized
deployment.
This commits adds the podman support on purging the dashboard resources
in the purge-cluster playbook.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
ceph/ceph-ansible#4805 introduced a symlink to
purge-container-cluster.yml playbook which is broken.
This commit fixes it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
All containers are removed when systemd stops them.
There is no need to call this module in purge container playbook.
This commit also removes all docker_image task and remove all container
images in the final cleanup play.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1776736
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is needed to avoid following error:
```
ERROR! The requested handler 'restart ceph mons' was not found in either the main handlers list nor in the listening handlers list
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1777829
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We must import this role in the first play otherwise the first call to
`client_group_name`fails.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1777829
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When a container is already running on a non containerized node then the
umount ceph partition task is skipped.
This is due to the container ps command which always returns 0 even if
the filter matches nothing.
We should run the umount task when:
1/ the container command is failing (not installed) : rc != 0
2/ the container command reports running ceph-osd containers : rc == 0
Also we should not fail on the ceph directory listing.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1616159
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
1. set noout and nodeep-scrub flags,
2. upgrade each OSD node, one by one, wait for active+clean pgs
3. after all osd nodes are upgraded, unset flags
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Rachana Patel <racpatel@redhat.com>
It might be possible at some point even with osd flags `noout` and
`norebalance` set the PGs states can change depending on the amount of data
written meantime. It means the check for PGs state will fail.
This commit changes the way we set those flags:
we set them before an OSD node upgrade and unset them before the PGs
state check so they can recover.
Fixes: #3961
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
in containerized context, using the binary provided in atomic os won't
work because it's an old version provided by ceph-common based on
10.2.5.
Using a container could be an idea but for large cluster with hundreds
of client nodes, that would require to pull the image of each of them
just to unmap the rbd devices.
Let's use the sysfs method in order to avoid any issue related to ceph
version that is shipped on the host.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1766064
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If the new mon/osd node doesn't have python installed then we need to
execute the tasks from raw_install_python.yml.
Closes: #4368
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit adds a default value in the `with_dict` because when using
python 2.7, if a task using a `with_dict` has a condition, it is
evaluated anyway whereas in python 3 it isn't.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1766499
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There's no need to use the default filter on active/standby groups
because if the group doesn't exist then the play is just skipped.
Currently this generates warnings like:
[WARNING]: Could not match supplied host pattern, ignoring: |
[WARNING]: Could not match supplied host pattern, ignoring: default([])
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The active mds host should be based on the inventory hostname and not on
the ansible hostname.
The value returns under the mdsmap structure is based on the OS hostname
so we need to find the right node in the inventory with this value when
doing operation on inventory nodes.
Othewise we could see error like:
The task includes an option with an undefined variable. The error was:
"hostvars[foobar]" is undefined
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
mon_host should use the inventory hostname and not the node hostname.
Fix creates an issue when the inventory and node hostname are different.
Closes: #4670
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph-container-engine role is missing from both playbooks so the
container engine (docker, podman) isn't install resulting in a failure
on the added nodes.
fatal: [xxxxx]: FAILED! => changed=false
cmd: docker --version
msg: '[Errno 2] No such file or directory'
rc: 2
Closes: #4634
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The [group|host]_vars directories are ignored for the dashboard playbook
when the inventory file directory doesn't contain those directories.
Closes: #4601
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1761612
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The common roles don't need to be executed again on each group plays
(like mons, osds, etc..).
We only need to execute them during the first play. That wat, we will
apply the changes on all nodes in parallel instead of doing it once per
group.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This is already done in the main playbooks but absent in the dashboard
playbook.
The facts are already gathered during the first play of the main
playbooks so we don't need to doing twice.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When switching from a baremetal deployment to a containerized deployment
we only umount the OSD data partition.
If the OSD is encrypted (dmcrypt: true) then there's an additional
partition (part number 5) used for the lockbox and mount in the
/var/lib/ceph/osd-lockbox/ directory.
Because this partition isn't umount then the containerized OSD aren't
able to start. The partition is still mount by the system and can't be
remount from the container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1616159
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit refacts the way we set `ceph_uid` fact in `ceph-facts` and
removes all `set_fact` tasks for `ceph_uid` in switch-to-containers playbook
to avoid duplicated code.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit excludes client nodes from facts gathering, they are not
needed and can speed up this task.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The block section were used with the dashboard_enabled condition when
the code was included in the main playbooks.
Because this condition isn't present in the dashboard playbook anymore
we can remove the block section.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit moves containerized deployment related files to `./tasks/`
directory. This is needed to make `docker-to-podman.yml` working since
we use `tasks_from:` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit moves containerized deployment related files to `./tasks/`
directory. This is needed to make `docker-to-podman.yml` working since
we use `tasks_from:` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit moves containerized deployment related files to `./tasks/
directory. This is needed to make `docker-to-podman.yml` working since
we use `tasks_from:` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this commit adds a new playbook to force systemd units for containers to
use podman instead of docker.
This is needed in the rhel8 upgrade context so after the base OS is upgraded
containers can be started using podman.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
after all mon are upgraded, let's reset mon_host which is used in the
rest of the playbook for setting `container_exec_cmd` so we are sure to
use the right value.
Typical error:
```
failed: [mds0 -> mon0] (item={u'path': u'/var/lib/ceph/bootstrap-mds/ceph.keyring', u'name': u'client.bootstrap-mds', u'copy_key': True}) => changed=true
ansible_loop_var: item
cmd:
- docker
- exec
- ceph-mon-mon2
- ceph
- --cluster
- ceph
- auth
- get
- client.bootstrap-mds
delta: '0:00:00.016294'
end: '2019-09-27 13:54:58.828835'
item:
copy_key: true
name: client.bootstrap-mds
path: /var/lib/ceph/bootstrap-mds/ceph.keyring
msg: non-zero return code
rc: 1
start: '2019-09-27 13:54:58.812541'
stderr: 'Error response from daemon: No such container: ceph-mon-mon2'
stderr_lines: <omitted>
stdout: ''
stdout_lines: <omitted>
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This change implements a filter_plugin that is used in the
ceph-facts, ceph-validate roles and infrastucture-playbooks.
The new filter plugin will return a list of all IP address
that reside in any one of the given IP ranges. The new filter
replaces the use of the ipaddr filter.
ceph.conf already support a comma separated list of CIDRs
for the public_network and cluster_network options.
Changes: [1] and [2] introduced a regression in ceph-ansible
where public_network can no longer be a comma separated list
of cidrs.
With this change a comma separated list of subnet CIDRs can
also be used for monitor_address_block and radosgw_address_block.
[1] commit: d67230b2a2
[2] commit: 20e4852888
Related-To: https://bugs.launchpad.net/tripleo/+bug/1840030
Related-To: https://bugzilla.redhat.com/show_bug.cgi?id=1740283Closes: #4333
Please backport to stable-4.0
Signed-off-by: Harald Jensås <hjensas@redhat.com>
The rolling_update.yml playbook fails when scanning ceph-disk osds while
deploying nautilus. The --force flag is required to scan existing osds
and rewrite their json metadata.
Signed-off-by: Sam Choraria <sam.choraria@bbc.co.uk>
This playbook helps to migrate all osds on a node from filestore to
bluestore backend.
Note that *ALL* osd on the specified osd nodes will be shrinked and
redeployed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If we're looking at the mon hostname in the ceph status output then
there's some scenarios where this could be true.
If we collocate some services (mons, mgrs, etc..) then the hostname of
the monitor to shrink will still be present in the ceph status (like
in mgrs or other).
Instead we should check the hostame only in the mon part of the output.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
By changing the set ownership command from using the file module in combination with a with_items loop to a raw chown command, we can achieve a 98% performance increase here.
On a ceph cluster with a significant amount of directories and files in /var/lib/ceph, the file module has to run checks on ownership of all those directories and files to determine whether a change is needed.
In this case, we just want to explicitly set the ownership of all these directories and files to the ceph_uid
Added context note to all set proper ownership tasks
Signed-off-by: Kevin Jones <kevinjones@redhat.com>
use `from_json` filter instead of a `| python` so we can get rid of the
`shell` module usage here.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to execute the ceph-dashboard role on the nodes present
in the grafana-server group. This one is dedicated to the grafana and
prometheus stack.
The ceph-dashboard needs to executed where the ceph-mgr is running. It
is either on the dedicated mgr nodes or if mgr and mon are collocated
implicitly on the mon nodes.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Add a playbook named shrink-rgw.yml to infrastructure-playbooks/ that
can remove a RGW from a node in an already deployed Ceph cluster.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
There's no need to add complexity and trying to fallback on other group.
Let's deploy dashboard on all nodes present in grafana-server group.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Move dashboard, grafana/prometheus and node-exporter plays into a
dedicated playbook in infrastructure-playbook directory.
To avoid using 'dashboard_enabled | bool' condition multiple time
in the main playbook we can just import the dashboard playbook or
not.
This patch also allows to use an unique dashboard playbook for
both baremetal and container playbooks.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Use facility built-in in Ansible to check whether a command was executed
successfully rather looking at its return value.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a playbook named "shrink-rbdmirror.yml" in infrastructure-playbooks/
that removes a RBD Mirror from a node in an already deployed Ceph
cluster.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a playbook, named "shrink-mgr.yml", in infrastructure-playbooks/
that removes a MGR from a node in an already deployed Ceph cluster.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
This commit refacts the way we check the "mds_to_kill" node is well
stopped.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a playbook, named "shrink-mds.yml", in infrastructure-playbooks/
that removes a MDS from a node in an already deployed Ceph cluster.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
The ceph-iscsi-config and ceph-iscsi-cli packages were combined into
ceph-iscsi and its APIs changed. This fixes up the iscsi purge task to
support the new API and old one.
Signed-off-by: Mike Christie <mchristi@redhat.com>
This tries to first unmount any cephfs/nfs-ganesha mount point on client
nodes, then unmap any mapped rbd devices and finally it tries to remove
ceph kernel modules.
If it fails it means some resources are still busy and should be cleaned
manually before continuing to purge the cluster.
This is done early in the playbook so the cluster stays untouched until
everything is ready for that operation, otherwise if you try to redeploy
a cluster it could end up by getting confused by leftover from previous
deployment.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1337915
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
3a100cfa52 introduced a check which is a
bit too restrictive, let's accept HEALTH_OK and HEALTH_WARN.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
starting an upgrade if the cluster isn't HEALTH_OK isn't a good idea.
Let's check for the cluster status before trying to upgrade.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Otherwise it fails like following:
```
fatal: [mon0]: FAILED! => changed=false
msg: |-
Unable to enable service ceph-mgr@mon0: Failed to execute operation: Cannot send after transport endpoint shutdown
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The ceph restapi configuration was only available until Luminous
release so we don't need those leftovers for nautilus+.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We currently only purge rh_storage yum repository file but depending
on the ceph_repository value we are using, the ceph repository file
could have a different name.
Resolves: #4056
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
The ceph-agent role was used only for RHCS 2 (jewel) so it's not
usefull anymore.
The current code will fail on CentOS distribution because the rhscon
package is only avaible on Red Hat with the RHCS 2 repository and
this ceph release is supported on stable-3.0 branch.
Resolves: #4020
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit splits the current `ceph-container-common` role.
This introduces a new role `ceph-container-engine` which handles the
tasks specific to the installation of containers tools (docker/podman).
This is needed for the ceph-dashboard implementation for 2 main reasons:
1/ Since the ceph-dashboard stack is only containerized, we must install
everything needed to run containers even in non containerized
deployments. Splitting this role allows us to not have to call the full
`ceph-container-common` role which would run a bunch of unneeded tasks
that would have been skipped anyway.
2/ The current implementation would have required to run
`ceph-container-common` on all ceph-clients nodes which would have been
conflicting with 9d3517c670 (we don't want
to run ceph-container-common on all client nodes, see mentioned commit
for more details)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Because we don't manage the docker service on atomic (yet) via the
ceph-container-common role then we can't stop docker dans remove
the data.
For now let's do that only for non atomic hosts.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit renames the `docker_exec_cmd` variable to
`container_exec_cmd` so it's more generic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit will merge dashboard-ansible installation scripts with
ceph-ansible. This includes several new roles to setup ceph-dashboard
and the underlying technologies like prometheus and grafana server.
Signed-off-by: Boris Ranto & Zack Cerza <team-gmeno@redhat.com>
Co-authored-by: Zack Cerza <zcerza@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
We never clean the content of /var/lib/docker so we can still have
some data present in this directory after run the purge playbook.
Pip isn't used anymore.
Also update the docker package name (especially the python binding
one).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The shell module doesn't have a stdout_lines attributes. Instead of
using the shell module, we can use the find modules.
Also adding `become: false` to the local tmp directory creation
otherwise we won't have enough right to fetch the files into this
directory.
Resolves: #3966
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We must stop tcmu-runner after the other rbd-target-* services
because they may need to interact with tcmu-runner during shutdown.
There is also a bug in some kernels where IO can get stuck in the
kernel and by stopping rbd-target-* first we can make sure all IO is
flushed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1659611
Signed-off-by: Mike Christie <mchristi@redhat.com>
We don't need infrastructure-playbooks/rgw-standalone.yml since
site.yml.sample and site-cotainer.yml.sample can add a new RGW node to
an already deployed Ceph cluster.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Currently only rbd-target-gw service is restarted during an update.
We also need to restart tcmu-runner and rbd-target-api services
during the ceph iscsi upgrade.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1659611
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
These tasks must be run from a monitor which is upgraded otherwise it
might fail.
See: https://tracker.ceph.com/issues/39355
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
these commands could return something else than 0.
Let's ensure all retries have been done before actually failing.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We do this so that the ceph-config role can most accurately
report the number of osds for the generation of the ceph.conf
file.
We don't want to use ceph-volume to determine the number of
osds because in an upgrade to nautilus ceph-volume won't be able to
accurately count osds created by ceph-disk.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
When upgrading to nautlius run ``ceph-volume simple scan`` and
``ceph-volume simple activate --all`` to migrate any running
ceph-disk osds to ceph-volume.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1656460
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Add a playbook that deploys a new monitor on a new node, adds that node
to the Ceph cluster and the monitor to the quorum and updates the ceph
configuration file on OSD nodes.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
When using purge-cluster playbook with nautilus, there's still the
python-ceph-argparse package installed on the host preventing to
reinstall a ceph cluster with a different version (like luminous or
mimic)
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
e6bfb84 introduced a regression in the switch from non containerized
to container deployment.
We need to stop all previous OSDs services. We just don't need the
ceph-disk pattern in the regex.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
as of stable-4.0, ceph-disk is no longer supported.
Let's remove this legacy version of the playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ceph aliases have been introduced in stable-3.2 during the ceph
deployment. On master this has been removed but we don't handle
this removal in the upgrade from stable-3.2 to master via the
rolling_update playbook.
Also remove the task from purge-docker-cluster missing from
d9e7835
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of hardcoding group names, import ceph-defaults earlier. Also,
rectify a minor mistake in vagrant_varaibles.yml for containerized
version of add_osds.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
`lvm_volumes` and/or `devices` variable(s) can be undefined depending on
the scenario chosen.
These tasks should be run only if these variable are defined, otherwise
it ends up with undefined variable errors.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1653307
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The systemd ceph-osd@.service file used for starting the ceph osd
containers is used in all osd_scenarios.
Currently purging a containerized deployment using the lvm scenario
didn't remove the ceph-osd systemd service.
If the next deployment is a non-containerized deployment, the OSDs
won't be online because the file is still present and override the
one from the package.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Similar to #3658
Since there's too many changes between master and stable branches let's
commit directly in each branches instead of trying to backport this
commit.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
all rgw instances should be stopped according to the multiple rgw
instances support added in rolling_update.yml
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a couple of fixes to allow containerized deployments upgrade support
to upgrade from luminous/mimic to nautilus.
- pass CEPH_CONTAINER_IMAGE and CEPH_CONTAINER_BINARY environment
variable to the ceph_key module,
- fix the docker exec command in 'waiting for the containerized monitor
to join the quorum' task according to the `delegate_to` parameter,
- override `docker_exec_cmd` in `ceph-facts` with `mon_host` when
rolling_update is `True`,
- do not run unnecessarily `create_mds_filesystems.yml` when performing an
upgrade.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
iscsigws were missing.
The 'complete upgrade' couldn't complete because rolling_update was set
to False for iscsigw nodes.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
once the cluster is upgraded to nautilus, we can complete the process by
disallowing pre-nautilus OSDs and enabling all new nautilus-only functionality
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of 1c760904b0, ceph-ansible implicitly
bootstrap managers on monitors.
mgrs must be upgraded only after all monitors, therefore, this commit
refact the way mgrs are upgraded to be sure we don't upgrade a mgr
during the monitors upgrade.
This commit also ensure we handle the case were we split managers on
dedicated nodes.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This directory is created by ceph-config node by node.
In the upgrade context we need it to be created on ALL monitors as soon
as the first iteration because of the task right after which creates and sends
the keyrings on all monitors.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This prevents the packaging from restarting services before we do need
to restart them in the rolling update sequence.
We want to handle services restart at rolling_update playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There is no need to set osd flags (noout, norebalance) each time we
upgrade a mon.
This commit moves up those tasks (before stopping the mon) so we don't need
to delegate them.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We actually want to ensure the node being upgraded is joining the quorum
instead of the monitor picked up earlier.
Indeed, the `mon_host`is used only in `delegate_to:` so we can still run ceph
commands while the monitor being upgraded is stopped.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the `containerized` parameter in ceph_key module doesn't exist anymore.
This was making the module failing but was hidden because of the
`ignore_errors: True`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
otherwise, it will end up with error like following:
```
FAILED! => {"msg": "'ansible.vars.hostvars.HostVarsVars object' has no attribute 'ansible_hostname'"}
```
because facts won't have been gathered.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1670663
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
as of b70d54ac80 the service launched isn't
ceph-rbd-mirror@admin.service.
it's now `ceph-rbd-mirror@rbd-mirror.{{ ansible_hostname }}`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
removing the content of this directory seems a bit agressive and cause a
redeployment to fail after a purge on debian based distrubition.
Typical error:
```
fatal: [mon0]: FAILED! => changed=false
attempts: 3
msg: No package matching 'ceph' is available
```
The following task will consider the cache is still valid, so apt
doesn't refresh it:
```
- name: update apt cache if cache_valid_time has expired
apt:
update_cache: yes
cache_valid_time: 3600
register: result
until: result is succeeded
```
since the task installing ceph packages has a `update_cache: no` it
fails:
```
- name: install ceph for debian
apt:
name: "{{ debian_ceph_pkgs | unique }}"
update_cache: no
state: "{{ (upgrade_ceph_packages|bool) | ternary('latest','present') }}"
default_release: "{{ ceph_stable_release_uca | default('') }}{{ ansible_distribution_release ~ '-backports' if ceph_origin == 'distro' and ceph_use_distro_backports else '' }}"
register: result
until: result is succeeded
```
/tmp/* isn't specific to ceph as well, so we shouldn't remove everything
in this directory.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
using `shell` module seems to be the only way to make this task working
on rhel based distribution AND debian based distributions.
on ubuntu, using `command` ansible module fails like following
(not due to `sudo` usage or not):
```
ok: [osd1] => changed=false
cmd: command -v ceph-volume
failed_when_result: false
msg: '[Errno 2] No such file or directory: ''command'': ''command'''
rc: 2
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1653307
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
remove old systemd unit files (non-containerized) during the
switch_to_containers transition.
We have seen sometimes the unit started is the old one instead of the
new systemd unit generated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
use the ceph binary from the container instead of the host.
If the ceph CLI version isn't compatible between host and container
image, it can cause the CLI to hang.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`ceph-mon` tries to redeploy monitors because it assumes it was not yet
deployed since `mon_socket_stat` and `ceph_mon_container_stat` are
undefined (indeed, we stop the daemon before calling `ceph-mon` in the
switch_to_containers playbook).
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The restart_osd_daemon.sh generated from the j2 template
contains a python call which uses 'print x' instead of
'print(x)'. Add the missing parentheses to make this call
compatible with both 2 and 3.
Also add parentheses to other python print calls found
in roles/ceph-client/defaults/main.yml and
infrastructure-playbooks/cluster-os-migration.yml.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1671721
Signed-off-by: John Fulton <fulton@redhat.com>
1ac94c048f introduced the support of
multiple rgw instances on a single host but somehow has missed to
implement this feature in rolling_update.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
With this, we could have multiple rgw instances on a single host
with a single run, don't have to use rgw-standalone.yml which does not
seems able to bind ports separately.
If you want to have multiple rgw instances, just change 'radosgw_instances'
to the number you want, which defaults to 1.
Not compatible with Multi-Site yet.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
There is no need to enforce `serial: 1` on client nodes.
Let's make it parameterizable by introducing a new *extra* variable
`client_update_batch`, if not filled this will default to `{{
ansible_forks }}`.
NOTE: this is only usable as an extra variable passed with
`-e client_update_batch=<num>`
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1650184
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This task has to be called after the role `ceph-defaults` has been
played, otherwise, `mon_group_name` will never be known.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
sometimes we play the whole role `ceph-defaults` just to access the
default value of some variables. It means we play the `facts.yml` part
in this role while it's not desired. Splitting this role will speedup
the playbook.
Closes: #3282
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the OSD part of the purge delegates commands on monitor node, we need to
gather monitors facts to know the `ansible_hostname` fact that is used
in the `docker_exec_cmd` fact.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Recently we introduced the default collocation of mon/mgr without the
need of a dedicated mgrs section. This means we have to stop the mgr
process on that machine too.
Signed-off-by: Sébastien Han <seb@redhat.com>
Recently we introduced the collocation of mon and mgr by default, so we
don't need to have an explicit mgrs section for this. This means we have
to remove the mgr container on the mon machines too.
Signed-off-by: Sébastien Han <seb@redhat.com>
It's useful when running on CI to see what might remain on the machines.
So we list all the containers and images. We expect the list to be
empty.
We fail if we see containers running.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commits adds the support for purging cluster that were deployed
with ceph-volume. It also separates nicely with a block intruction the
work to do when lvm is used or not.
Signed-off-by: Sébastien Han <seb@redhat.com>
Since sharing variables amongst roles has been made default since
Ansible 2.6, private option has been deprecated; so stop using it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Json is a type structure which is always typed as a string, where before
this we were declaring a dict, which is not a json valid structure.
Signed-off-by: Sébastien Han <seb@redhat.com>
add iscsi support for both non containerized and containerized
deployment in purge playbooks.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1651054
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will speed up the deployment and also deploy mon and mgr collocated
just as recommended.
This won't prevent you of adding more and dedicaded machines for mgr if
needed.
Signed-off-by: Sébastien Han <seb@redhat.com>
This failure condition was only valid at the time where clusters didn't
have ceph-mgr activated. Now since we collocate the ceph-mgr with the
mon by default, if the daemon wasn't present it will be created during
the upgrade.
Signed-off-by: Sébastien Han <seb@redhat.com>
try to create the potentially missing keys only on monitors that are
actually running.
The current node being played is stopped before this task.
By the way, delegating the command on all nodes but the current node
being played ensures that the generated keys will be present on all
monitors.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
So we can avoid the following failure:
The conditional check 'hostvars[mon_host]['ansible_hostname'] in (ceph_health_raw.stdout | from_json)["quorum_names"] or hostvars[mon_host]['ansible_fqdn'] in (ceph_health_raw.stdout | from_json)["quorum_names"]
' failed. The error was: No JSON object could be decoded
We just need to set a default, the next iteration will have a more
complete json since the command won't fail.
Signed-off-by: Sébastien Han <seb@redhat.com>
when upgrading from RHCS 2.5 to 3.2, it fails because the task `create
ceph mgr keyring(s) when mon is containerized` has a when condition
`inventory_hostname == groups[mon_group_name]|last`.
First, this is incorrect because `inventory_hostname` is referring to a
mgr node, it means this condition would have never been satisfied.
Then, this condition + `serial: 1` makes the mgr keyring creating skipped on
the first node. Further, the `ceph-mgr` role tries to copy the mgr
keyring (it's not aware we are running `serial: 1`) this leads to a
failure like the following:
```
TASK [ceph-mgr : copy ceph keyring(s) if needed] ***************************************************************************************************************************************************************************************************************************************************************************
task path: /usr/share/ceph-ansible/roles/ceph-mgr/tasks/common.yml:10
Tuesday 27 November 2018 12:03:34 +0000 (0:00:00.296) 0:11:01.290 ******
An exception occurred during task execution. To see the full traceback, use -vvv. The error was: AnsibleFileNotFound: Could not find or access '~/ceph-ansible-keys/48d78ac1-e0d6-4e35-ab3e-772aea7828fc//etc/ceph/local.mgr.magna021.keyring'
failed: [magna021] (item={u'dest': u'/var/lib/ceph/mgr/local-magna021/keyring', u'name': u'/etc/ceph/local.mgr.magna021.keyring', u'copy_key': True}) => {"changed": false, "item": {"copy_key": true, "dest": "/var/lib/ceph/mgr/local-magna021/keyring", "name": "/etc/ceph/local.mgr.magna021.keyring"}, "msg": "Could not find or access '~/ceph-ansible-keys/48d78ac1-e0d6-4e35-ab3e-772aea7828fc//etc/ceph/local.mgr.magna021.keyring'"}
```
The ceph_key module is idempotent, so there is no need to have such a
condition.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1649957
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Use the new way to create keys on containerized env as introduced by: 1098b71bda90db3dad19ac179f0ba900ccb0f953
Signed-off-by: Sébastien Han <seb@redhat.com>
Use podman or docker wether they are available or not. podman will be
prioritized over docker if present.
Signed-off-by: Sébastien Han <seb@redhat.com>
`hostvars[groups[mon_host]]['ansible_hostname']` seems to be a typo.
That should be `hostvars[mon_host]['ansible_hostname']`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
each monitor node should select another monitor which isn't itself.
Otherwise, one node in the monitor group won't set this fact and causes
failure.
Typical error:
```
TASK [create potentially missing keys (rbd and rbd-mirror) when mon is containerized] ***
task path: /home/jenkins-build/build/workspace/ceph-ansible-prs-dev-update_docker_cluster/rolling_update.yml:200
Thursday 22 November 2018 14:02:30 +0000 (0:00:07.493) 0:02:50.005 *****
fatal: [mon1]: FAILED! => {}
MSG:
The task includes an option with an undefined variable. The error was: 'dict object' has no attribute u'mon2'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
During an upgrade ceph won't create keys that were not existing on the
previous version. So after the upgrade of let's Jewel to Luminous, once
all the monitors have the new version they should get or create the
keys. It's ok to have the task fails, especially for the rbd-mirror
key, which only appears in Nautilus.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1650572
Signed-off-by: Sébastien Han <seb@redhat.com>
It's easier lookup a directoriy instead of the block devices,
especially because of ceph-volume and ceph-disk have a different way to
handle devices.
Signed-off-by: Sébastien Han <seb@redhat.com>
Prior to this commit we were only disabling ceph-osd units, but forgot
the ceph.target which is controlling everything and will restart the
ceph-osd units at each reboot.
Now that everything gets disabled there won't be any conflicts between
the old non-container and the new container units.
Signed-off-by: Sébastien Han <seb@redhat.com>
If we mask it we won't be able to start the OSD container since now the
osd container use the osd ID as a name such as: ceph-osd@0
Fixes the error: Failed to execute operation: Cannot send after transport endpoint shutdown
Signed-off-by: Sébastien Han <seb@redhat.com>
Add quotes around package names added in the commit
da6f384223 so that the difference between
the Ansible variables and package names is clear.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Instead of looping over a list of packages or repeating the task
separately for different packages, pass the list of packages to the
task performing package management.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
This is needed for Nautilus since the ceph-create-keys script goes away.
(https://github.com/ceph/ceph/pull/21305)
Now the module if called with 'state: fetch_initial_keys' will lookup
keys generated by the monitor and write them down on the filesystem to
the right location (/etc/ceph and /var/lib/ceph/boostrap*).
This is not applicable to container since keys are generated by the
container only.
Signed-off-by: Sébastien Han <seb@redhat.com>
When the iscsi purge playbook is run we stop the gw and api daemons but
not tcmu-runner which I forgot on the previous PR.
Fixes Red Hat BZ:
https://bugzilla.redhat.com/show_bug.cgi?id=1621255
Signed-off-by: Mike Christie <mchristi@redhat.com>
This is needed for Nautilus since the ceph-create-keys script goes away.
(https://github.com/ceph/ceph/pull/21305)
Now the module if called with 'state: fetch_initial_keys' will lookup
keys generated by the monitor and write them down on the filesystem to
the right location (/etc/ceph and /var/lib/ceph/boostrap*).
This is not applicable to container since keys are generated by the
container only.
Signed-off-by: Sébastien Han <seb@redhat.com>
For tasks using (Ansible) modules for package management utilities,
pass the list of packages to be installed instead of repeating the task
for each package. Using the latter manner of installing a list of
packages leads to a deprecation warning by ansible-playbook command.
Fixes: https://github.com/ceph/ceph-ansible/issues/3293
Signed-off-by: Rishabh Dave <ridave@redhat.com>
For apt-get, purge command needs to be used, instead of remove command,
to remove related configuration files. Otherwise, packages might be
shown as installed while running dpkg command even after removing them.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1640061
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Since import_role and include_role are more readable, explicit (about
the nature of inclusion) and flexible (allows placibf inclusion
anywhere) amongst the tasks, use them instead of using roles or role
keyword. Besides, these keywords also allow more arguments.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
When purging the entire igw config (lio and rbd) stop disable the api
and gw daemons.
Fixes Red Hat BZ
https://bugzilla.redhat.com/show_bug.cgi?id=1621255
Signed-off-by: Mike Christie <mchristi@redhat.com>
CLusters that were deployed using 'mon_use_fqdn' have a different unit
name, so during the upgrade this must be used otherwise the upgrade will
fail, looking for a unit that does not exist.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1597516
Signed-off-by: Sébastien Han <seb@redhat.com>
Dimitri Savineau
Guillaume Abrioux
Benoît Knecht
wujie1993
Harald Jensås
Sam Choraria
Mehdy
Kevin Jones
Rishabh Dave
Mike Christie
guihecheng
L3D
Zack Cerza
Boris Ranto
wumingqiao
letterwuyu
Andrew Schoen
John Fulton
Noah Watkins
Giulio Fidente
Daniel-Pivonka
Noah Watkins
Sébastien Han
Ramana Raja
Ali Maredia