This commit enforces the pytest-rerunfailures installed so it's <9.0
This is to avoid the following error:
```
ERROR: pytest-rerunfailures 9.0 has requirement pytest>=5.0, but you'll have pytest 4.6.11 which is incompatible.
```
latest version of pytest-rerunfailures isn't compatible with the version
of pytest we are using.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 19097026fb)
This is a workaround to avoid error like following:
```
Error: error creating container storage: the container name "ceph-mgr-magna022" is already in use by "4a5f674e113f837a0cc561dea5d2cd55d16ca159a647b7794ab06c4c276ef701"
```
that doesn't seem to be 100% reproducible but it shows up after a
reboot. The only workaround we came up with at the moment is to run
`podman rm --storage <container>` before starting it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1887716
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5ba7824c55)
fa2bb3a only fix the symlink owner/group issue in the OSD play. If the
OSDs are collocated with other services like MONs and MGRs then the
chown command will fail.
$ find /var/lib/ceph/osd/ceph-0 -not -user 167 -execdir chown 167:167 {} +
chown: cannot dereference './block': Permission denied
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1896448
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 35ed9977aa)
The osd_memory_target variable was only used if it was higher than the
calculated value based on the number of OSDs. This is changed to always
use the value if it is set in the configuration. This allows this value
to be intentionally set lower so that it does not have to be changed
when more OSDs are added later.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 4d1fdd2b05)
The `osd_pool_default_crush_rule` is set based on `crush_rule_variable`, which
is the output of a `grep` command.
However, two consecutive tasks can set that variable, and if the second task is
skipped, it still overwrites the `crush_rule_variable`, leading the
`osd_pool_default_crush_rule` to be set to `ceph_osd_pool_default_crush_rule`
instead of the output of the first task.
This commit ensures that the fact is set right after the `crush_rule_variable`
is assigned, before it can be overwritten.
Closes#5912
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit c5f7343a2f)
There are some use cases where there's a need to skip the execution
of the ceph-ansible client role even though the client section of the
inventory isn't empty.
This can happen in contexts where the services are colocated or when
a all-in-one deployment is performed.
The purpose of this change is adding a 'ceph_client' tag to avoid
altering the ceph-ansible execution flow but at the same time be able
to include or exclude a set of tasks using this tag.
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit fafd5f871a)
When deploying the ceph OSD via the packages then the ceph-osd@.service
unit is configured as enabled-runtime.
This means that each ceph-osd service will inherit from that state.
The enabled-runtime systemd state doesn't survive after a reboot.
For non containerized deployment the OSD are still starting after a
reboot because there's the ceph-volume@.service and/or ceph-osd.target
units that are doing the job.
$ systemctl list-unit-files|egrep '^ceph-(volume|osd)'|column -t
ceph-osd@.service enabled-runtime
ceph-volume@.service enabled
ceph-osd.target enabled
When switching to containerized deployment we are stopping/disabling
ceph-osd@XX.servive, ceph-volume and ceph.target and then removing the
systemd unit files.
But the new systemd units for containerized ceph-osd service will still
inherit from ceph-osd@.service unit file.
As a consequence, if an OSD host is rebooting after the playbook execution
then the ceph-osd service won't come back because they aren't enabled at
boot.
This patch also adds a reboot and testinfra run after running the switch
to container playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881288
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit fa2bb3af86)
This sets the `dashboard_grafana_api_no_ssl_verify` default value
according to the length of `dashboard_crt` and `dashboard_key`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5cadfea42e)
If some OSDs are to be created and others already exist the calculation
only counted the to be created OSDs. This changes the calculation to
take all OSDs into account.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 15044da030)
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the cluster health, we're using the health structure in the
ceph status output.
To optimize this, we could use the ceph health command which contains
the same needed information.
$ ceph status -f json | wc -c
2001
$ ceph health -f json | wc -c
46
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit acddf4fb67)
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the rgw/rbdmirror services status, we're only using the
servicmap structure in the ceph status output.
To optimize this, we could use the ceph service dump command which contains
the same needed information.
This command returns less information and is slightly faster than the ceph
status command.
$ ceph status -f json | wc -c
2001
$ ceph service dump -f json | wc -c
1105
$ time ceph status -f json > /dev/null
real 0m0.557s
user 0m0.516s
sys 0m0.040s
$ time ceph service dump -f json > /dev/null
real 0m0.454s
user 0m0.434s
sys 0m0.020s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 3f9081931f)
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the quorum status, we're only using the quorum_names
structure in the ceph status output.
To optimize this, we could use the ceph quorum_status command which contains
the same needed information.
This command returns less information.
$ ceph status -f json | wc -c
2001
$ ceph quorum_status -f json | wc -c
957
$ time ceph status -f json > /dev/null
real 0m0.577s
user 0m0.538s
sys 0m0.029s
$ time ceph quorum_status -f json > /dev/null
real 0m0.544s
user 0m0.527s
sys 0m0.016s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 88f91d8c12)
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the pgs state, we're using the pgmap structure in the ceph
status output.
To optimize this, we could use the ceph pg stat command which contains
the same needed information.
This command returns less information (only about pgs) and is slightly
faster than the ceph status command.
$ ceph status -f json | wc -c
2000
$ ceph pg stat -f json | wc -c
240
$ time ceph status -f json > /dev/null
real 0m0.529s
user 0m0.503s
sys 0m0.024s
$ time ceph pg stat -f json > /dev/null
real 0m0.426s
user 0m0.409s
sys 0m0.016s
The data returned by the ceph status is even bigger when using the
nautilus release.
$ ceph status -f json | wc -c
35005
$ ceph pg stat -f json | wc -c
240
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ee50588590)
Improve the checked way of the OSD created checking process.
This replaces the ceph status command by the ceph osd stat command.
The osdmap structure isn't needed anymore.
$ ceph status -f json | wc -c
2001
$ ceph osd stat -f json | wc -c
132
$ time ceph status -f json > /dev/null
real 0m0.563s
user 0m0.526s
sys 0m0.036s
$ time ceph osd stat -f json > /dev/null
real 0m0.457s
user 0m0.411s
sys 0m0.045s
Signed-off-by: wangxiaotong <wangxiaotong@fiberhome.com>
(cherry picked from commit b9cb0f12e9)
After rolling updates performed with
`infrastructure-playbooks/rolling_updates.yml`, files located in
`/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }}` had mode 0755 (including
the keyring), making them world-readable.
This commit separates the task that configured permissions recursively on
`/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }}` into two separate tasks:
1. Set the ownership and mode of the directory itself;
2. Recursively set ownership in the directory, but don't modify the mode.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 0d76826bbb)
Otherwise this task fails if no permission is set on the item.
Previously the code omited the mode parameter if it was not set, but
this was lost with commit ab370b6ad8.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 79ff79c422)
Since we've changed to podman configuration using the detach mode and
systemd type to forking then the container logs aren't present in the
journald anymore.
The default conmon log driver is using k8s-file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 16cd183b9c)
When using the curl command with ipv6 address and brackets then we need
to use the -g option otherwise the command fails.
$ curl http://[fdc2:328:750b:6983::6]:8080
curl: (3) [globbing] error: bad range specification after pos 9
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit cdb7b09cd7)
This file is currently deployed with '0644' ownership making this file
readable by any user on the system.
Since it contains sensitive information it should be readable by the
owner only.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890119
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a822f77300)
Correctly set `osd_ids_non_container.stdout_lines` to an empty list if it's
undefined (i.e. in check mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 8b0023cb77)
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 8f436ab5d8)
When running rhel8 containers on a rhel7 host, after zapping an OSD
there's a discrepancy with the lvmetad cache that needs to be refreshed.
Otherwise, the host still sees the lv and can makes the user confused.
If user tries to redeploy an OSD, it will fail because the LV isn't
present and need to be recreated.
ie:
```
stderr: lsblk: ceph-block-8/block-8: not a block device
stderr: blkid: error: ceph-block-8/block-8: No such file or directory
stderr: Unknown device, --name=, --path=, or absolute path in /dev/ or /sys expected.
usage: ceph-volume lvm prepare [-h] --data DATA [--data-size DATA_SIZE]
[--data-slots DATA_SLOTS] [--filestore]
[--journal JOURNAL]
[--journal-size JOURNAL_SIZE] [--bluestore]
[--block.db BLOCK_DB]
[--block.db-size BLOCK_DB_SIZE]
[--block.db-slots BLOCK_DB_SLOTS]
[--block.wal BLOCK_WAL]
[--block.wal-size BLOCK_WAL_SIZE]
[--block.wal-slots BLOCK_WAL_SLOTS]
[--osd-id OSD_ID] [--osd-fsid OSD_FSID]
[--cluster-fsid CLUSTER_FSID]
[--crush-device-class CRUSH_DEVICE_CLASS]
[--dmcrypt] [--no-systemd]
ceph-volume lvm prepare: error: Unable to proceed with non-existing device: ceph-block-8/block-8
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886534
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0bb106045e)
The current task installs the ceph-crash key to "most" hosts via
"delegate_to". This key is only used by the ceph-crash daemon and should
just be installed on all hosts targeted by this role. There is no need
for using a delegated task.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 68cc93fb18)
We don't need to run flake8 on ansible modules and their tests if we
don't have any modifitions.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 00b7ee27df)
The service should be started after the ceph-osd systemd overrides has
been added, otherwise, the latter isn't considered.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1860739
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 59d0f01992)
Using the + operation on two lists doesn't filter out the duplicate
keys.
Currently each OSDs is started (via systemd) twice.
Instead we could use the union filter.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4eaa65c362)
the `stat --printf=%n` returns something like following:
```
ok: [osd0] => changed=false
cmd: |-
stat --printf=%n /var/run/ceph/ceph-osd*.asok
delta: '0:00:00.009388'
end: '2020-10-06 06:18:28.109500'
failed_when_result: false
rc: 0
start: '2020-10-06 06:18:28.100112'
stderr: ''
stderr_lines: <omitted>
stdout: /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
stdout_lines: <omitted>
```
it makes the next task "check if the ceph osd socket is in-use" grep
like this:
```
ok: [osd0] => changed=false
cmd:
- grep
- -q
- /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
- /proc/net/unix
```
which will obviously fail because this path never exists. It makes the
OSD handler broken.
Let's use `find` module instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 46d4d97da9)
Running the `ceph_crush.py`, `ceph_key.py` or `ceph_volume.py` modules in check
mode resulted in the following error:
```
New-style module did not handle its own exit
```
This was due to the fact that they simply returned a `dict` in that case,
instead of calling `module.exit_json()`.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 85dd405814)
Make sure the `site.yml.sample` playbook can be run in check mode by skipping
tasks that try to read the output of commands that have been skipped.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 54ba38e35e)
`all_daemons` scenario can't handle pools with `size: 3` because we have
1 osd node in root=HDD and two nodes in root=default.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e5713ea5d5)
Currently the `ceph_key` module doesn't support using a different
keyring than `client.admin`.
This commit adds the possibility to use a different keyring.
Usage:
```
ceph_key:
name: "client.rgw.myrgw-node.rgw123"
cluster: "ceph"
user: "client.bootstrap-rgw"
user_key: /var/lib/ceph/bootstrap-rgw/ceph.keyring
dest: "/var/lib/ceph/radosgw/ceph-rgw.myrgw-node.rgw123/keyring"
caps:
osd: 'allow rwx'
mon: 'allow rw'
import_key: False
owner: "ceph"
group: "ceph"
mode: "0400"
```
Where:
`user` corresponds to `-n (--name)`
`user_key` corresponds to `-k (--keyring)`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 12e6260266)
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook in baremetal deployments.
When ceph-osd notifies handlers, it means rgw handlers are triggered
too. The issue with this is that they are triggered before the role
ceph-rgw is run.
In the case a scaleout operation is expected on `radosgw_num_instances`
it causes an issue because keyrings haven't been created yet so the new
instances won't start.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a802fa2810)
tests/conftest.py and tests present in tests/functional/tests/ has been
missed from previous commit
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8596f1d52c)
# Conflicts:
# .github/workflows/flake8.yml
This commit modifies all *.py files in ./tests/library/ so flake8
passes.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e49a5241f0)
drop ricardochaves/python-lint action and use `run` steps instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f2d3432cad)
(cherry picked from commit 8f6e0b2a18)
Add github workflow. Especially for flake8 for now.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 1ee626a1b3)
(cherry picked from commit ed6ae6815d)
This commit ensure all ceph-ansible modules pass flake8 properly.
Signed-off-by: Wong Hoi Sing Edison <hswong3i@gmail.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 268a39ca0e)
(cherry picked from commit 32a2f04cbc)
This file is a leftover and should have been removed when we dropped the
validate module.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8603cba9ab)
This commit adds the `osd_auto_discovery` scenario support in the
filestore-to-bluestore playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881523
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8b1eeef18a)
In case of deploying new monitor node to an existing cluster,
osd_pool_default_crush_rule should be taken from running monitor because
ceph-osd role won't be run and the new monitor will have different
osd_pool_default_crush_role from other monitors.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit ff9f4d138f)
This commit adds connection checks before realm pulls
Curls are performed on the endpoint being pulled from
the mons and the rgws
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1731158
Signed-off-by: Ali Maredia <amaredia@redhat.com>
(cherry picked from commit 902575369c)
In non containerized deployment we check if the service is running
via the socket file presence.
This is done via the xxx_socket_stat variable that check the file
socket in the /var/run/ceph/ directory.
In some scenarios, we could have the socket file still present in
that directory but not used by any process.
That's why we have the xxx_stat variable which clean those leftovers.
The problem here is that we're set the variable for the handlers status
(like handler_mon_status) based on xxx_socket_stat instead of xxx_stat.
That means we will trigger the handlers if there's an old socket file
present on the system without any process associated.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1866834
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 733596582d)
delegate to its own host after checking mon socket to findout if mon socket is in-use or not.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit 69f7e35382)
We don't use ceph_release variable in the ceph.conf jinja template.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 62bd41f0d4)
Guillaume Abrioux
Dimitri Savineau
Gaudenz Steinlin
Benoît Knecht
Francesco Pantano
wangxiaotong
Wong Hoi Sing Edison
Seena Fallah
Ali Maredia